• Home
  • Search
  • Implementing and diagnosing magnetic flux compression on the Z pulsed power accelerator
  • Open Access IconOpen Access
  • Cite Icon3
  • https://doi.org/10.2172/1226004Copy DOI Icon

Implementing and diagnosing magnetic flux compression on the Z pulsed power accelerator

  • Nov 1, 2015
  • Ryan Mcbride +30 more
Show More
  • Abstract
  • Literature Map
  • Citations
  • Similar Papers
Abstract

We report on the progress made to date for a Laboratory Directed Research and Development (LDRD) project aimed at diagnosing magnetic flux compression on the Z pulsed-power accelerator (0-20 MA in 100 ns). Each experiment consisted of an initially solid Be or Al liner (cylindrical tube), which was imploded using the Z accelerator's drive current (0-20 MA in 100 ns). The imploding liner compresses a 10-T axial seed field, B z ( 0 ) , supplied by an independently driven Helmholtz coil pair. Assuming perfect flux conservation, the axial field amplification should be well described by B z ( t ) = B z ( 0 ) x [ R ( 0 ) / R ( t )] 2 , where R is the liner's inner surface radius. With perfect flux conservation, B z ( t ) and dB z / dt values exceeding 10 4 T and 10 12 T/s, respectively, are expected. These large values, the diminishing liner volume, and the harsh environment on Z, make it particularly challenging to measure these fields. We report on our latest efforts to do so using three primary techniques: (1) micro B-dot probes to measure the fringe fields associated with flux compression, (2) streaked visible Zeeman absorption spectroscopy, and (3) fiber-based Faraday rotation. We also mention two new techniques that make use of the neutron diagnostics suite on Z. These techniques were not developed under this LDRD, but they could influence how we prioritize our efforts to diagnose magnetic flux compression on Z in the future. The first technique is based on the yield ratio of secondary DT to primary DD reactions. The second technique makes use of the secondary DT neutron time-of-flight energy spectra. Both of these techniques have been used successfully to infer the degree of magnetization at stagnation in fully integrated Magnetized Liner Inertial Fusion (MagLIF) experiments on Z [P. F. Schmit et al. , Phys. Rev. Lett. 113 , 155004 (2014); P. F. Knapp et al. , Phys. Plasmas, 22 , 056312 (2015)]. Finally, we present some recent developments for designing and fabricating novel micro B-dot probes to measure B z ( t ) inside of an imploding liner. In one approach, the micro B-dot loops were fabricated on a printed circuit board (PCB). The PCB was then soldered to off-the-shelf 0.020- inch-diameter semi-rigid coaxial cables, which were terminated with standard SMA connectors. These probes were recently tested using the COBRA pulsed power generator (0-1 MA in 100 ns) at Cornell University. In another approach, we are planning to use new multi-material 3D printing capabilities to fabricate novel micro B-dot packages. In the near future, we plan to 3D print these probes and then test them on the COBRA generator. With successful operation demonstrated at 1-MA, we will then make plans to use these probes on a 20-MA Z experiment.

Similar Papers
  • Research Article

Helical Striations and Magnetic Flux Compression in an Axially Premagnetized Gas-Puff z-Pinch Imploding Onto a Dense Central Target

  • Oct 01, 2024
  • IEEE Transactions on Plasma Science
  • Joe M Chen +5
  • Research Article
  • Citations34

Auto-magnetizing liners for magnetized inertial fusion

  • Jan 01, 2017
  • Physics of Plasmas
  • S A Slutz +5
  • Conference Article
  • Citations1

History and tribute to V. Mokhov

  • Oct 01, 2012
  • S F Garanin
  • Research Article
  • Citations10

Observation and diagnostic application of Kr K-shell emission in magnetized liner inertial fusion experiments at Z.

  • Oct 01, 2022
  • Review of Scientific Instruments
  • J T Clapp +4
  • Single Report

Advances in the Magnetized Liner Inertial Fusion Approach

  • Nov 01, 2024
  • Matthew Gomez
  • Conference Article

Megagauss-Level Magnetic Field and Dielectric Breakdown Measured in Auto-Magnetizing Liner Experiments

  • Jun 24, 2018
  • Gabriel A Shipley +7
  • Conference Article

The magnetic flux compression scheme as a power amplification & pulse shaping stage

  • May 26, 2002
  • M Bavay +10
  • Conference Article
  • Citations2

Caballero: a high current flux compressor system for 100 MJ solid liner experiments

  • Aug 14, 2015
  • R.E Reinovsky +4
  • Research Article
  • Citations4

Simulations of the Interaction of High-Velocity Condensed-Matter Liners With Walls

  • Oct 01, 2017
  • IEEE Transactions on Plasma Science
  • Anatoly M Buyko +1
  • PDF
  • Research Article
  • Citations16

A 7.2 keV spherical x-ray crystal backlighter for two-frame, two-color backlighting at Sandia's Z Pulsed Power Facility.

  • Oct 01, 2017
  • Review of Scientific Instruments
  • M S Schollmeier +14
  • Research Article

内爆圆柱套筒磁通量压缩的磁流体力学计算

  • Jan 01, 2014
  • High Power Laser and Particle Beams
  • 赵继波 Zhao Jibo +3
  • Conference Article
  • Citations24

High-energy space propulsion based on magnetized target fusion

  • Jun 20, 1999
  • Y C Francis Thio +5
  • Research Article
  • Citations5

Hyperbolic initial-boundary-value problem for magnetic flux compression by plane liners

  • Jul 01, 1983
  • Applied Physics B Photophysics and Laser Chemistry
  • H E Wilhelm
  • Conference Article
  • Citations1

Thermonuclear burn wave propagation across an ultrahigh magnetic field

  • Jul 01, 2012
  • A L Velikovich +3
  • Conference Article

Dielectric-metallic phase transition in magnetic-flux compression experiments

  • Jan 01, 2000
  • S.E Goh
Cactus Communications logo

Copyright 2026 Cactus Communications. All rights reserved.