Improved filter bank common spatial pattern algorithm based on the sparrow search algorithm

Brain computer interfaces (BCIs) based on motor imagery (MI) play an important role in helping to improve and restore the loss of physical function. However, traditional MI-BCIs are limited to the motion intention of gross limb, which places many restrictions on their applications. This study proposes a hybrid paradigm based on MI and the steady-state somatosensory evoked potential, with the aim of improving the spatial resolution of MI recognition. Twelve subjects participated in this study. They performed MI tasks under MI and hybrid conditions. In the MI condition, subjects only performed MI tasks, whereas, in the hybrid condition, they received an electrical stimulus while performing the same tasks. Under the hybrid condition, subjects were required not to pay extra attention to the electrical stimulation. The MI task included imagining clenching the right hand and lifting the right forearm. The classifier was built using the filter bank common spatial pattern algorithm and a support vector machine, and online experiments were used to verify the recognition of two MI tasks. During the online experiments, all subjects were able to output different commands at a recognition accuracy far higher than the random level. The average classification accuracy of the hybrid condition reached 76.39%, with a maximum value of 88.34%, which was about 11% higher than that of the MI condition. Moreover, based on offline data, the classification performance using the event-related desynchronization (ERD) feature under the hybrid condition did not differ significantly from that under the MI condition, indicating that the introduction of electrical stimulation did not interfere in the separability of ERD. The proposed paradigm improved the efficiency of decoding multiple MI locations within a single limb. Despite the introduction of external stimuli, users could still drive the new system in the same way as MI in traditional MI-BCI.

Electroencephalogram (EEG) based motor imagery (MI) brain-computer interface (BCI) has emerged as a promising tool for communication and control. Most MI classification methods use fixed-length time windows to intercept signals and perform subsequent analyses. However, the fixed-length time window interception method can not achieve optimal performance due to significant differences in the multiple imagining tasks of the same subject. In this paper, we present a novel interception method using long and short windows (LSWs). This method takes advantage of the subject’s motor imaginary strength at different times of the task to select specific time windows corresponding to the most salient features. The features corresponding to the selected time windows are used for the final MI classification. We compare the proposed LSW interception method with the fixed-length time window method on a public EEG dataset (BCI competition IV dataset 1) and a self-collected dataset. The results show that the classification accuracies are improved with the LSW interception method on both datasets. When using the support vector machine (SVM) classifier, the classification accuracy of common spatial pattern with the LSW method achieves 2.57% and 1.12% improvement on two datasets, respectively, and the classification accuracy of filter bank common spatial pattern (FBCSP) with the LSW method achieves 0.93% and 1.48% improvement, respectively. Among them, the classification accuracy of the LSW method with FBCSP and SVM is the highest, which is 93.43% and 91.12%, respectively. Compared with the traditional methods, this method significantly increases the classification accuracy and provides a new idea for researching the MI classification method in BCI.

Stroke is a life-changing event that can affect the survivors' physical, cognitive and emotional state. Stroke care focuses on helping the survivors to regain their strength; recover as much functionality as possible and return to independent living through rehabilitation therapies. Automated training protocols have been reported to improve the efficiency of the rehabilitation process. These protocols also decrease the dependency of the process on a professional trainer. Brain-Computer Interface (BCI) based systems are examples of such systems where they make use of the motor imagery (MI) based electroencephalogram (EEG) signals to drive the rehabilitation protocols. In this paper, we have proposed the use of well-known machine learning (ML) algorithms, such as, the decision tree (DT), Naive Bayesian (NB), linear discriminant analysis (LDA), support vector machine (SVM), ensemble learning classifier (ELC), and artificial neural network (ANN) for MI wrist dorsiflexion prediction in a BCI assisted stroke rehabilitation study conducted on eleven stroke survivors with either the left or right paresis. The doubling sub-band selection filter bank common spatial pattern (DSBS-FBCSP) has been proposed as feature extractor and it is observed that the ANN based classifier produces the best results.

Brain Computer Interface (BCI) technology is used to help patients who do not have control over motor neurons such as ALS or paralyzed patients, to communicate with outer world. This work aims to classify motor imageries using real-time EEG dataset, which was published by Graz University, Austria. The dataset consists of two-channel EEG signals of right-hand movement imagery and left-hand movement imagery of 8 subjects. There are a total of 120 motor imagery trials (60 left and 60 right) EEG signals recorded from each subject. EEG signals are filtered and feature vectors were extracted that consist of 24, 32 and 40 relative band power values (RBPV). In this work, feature vectors classified by three different methods, linear discriminant analysis (LDA), K nearest neighbor (KNN) and support vector machines (SVM). Results show that best performance was achieved by 24 RBPV feature vector and LDA classification method.

Brain-computer interfaces (BCIs) were initially created to help individuals with disabilities control devices and communicate without muscle movement. Today, BCIs are used for prosthetic control, cognitive enhancement, and neurological rehabilitation. The BCI system depends on analyzing electroencephalogram (EEG) signals captured from the brain. Decoding these EEG signals is a complex process that combines multiple algorithms to extract meaningful information from these intricate and noisy signals. One of the most popular techniques is the Common Spatial Patterns (CSP), which helps preserve useful and sensitive information. This paper presents an optimized extension of the CSP model for extracting EEG data features in a multiclass setting using Riemannian geometry-based weighting. The use of weighting based on Riemannian geometry enhances the robustness of covariance matrix computation, thereby decreasing the influence of noise that can significantly distort the mean of covariance matrices in the traditional CSP method. The proposed approach is also extended by the integration of a multi-band filter bank, providing a more detailed examination of EEG signals. Three classifiers, Linear Discriminant Analysis (LDA), Random Forest Classifier (RFC), and Multi-Layer Perceptron (MLP), are employed to differentiate features across four motor imagery tasks. LDA achieves an accuracy of 80.40%, while MLP and RFC reach 80.02% and 80.90%, respectively. The results obtained using a majority vote combining the decisions of the three classifiers are 81.83% for accuracy and Recall, 82.74% for precision, and 81.87% for F1-score. The proposed architecture is evaluated using the BCI Competition IV set 2a dataset, proving its effectiveness in EEG signal classification for BCI applications.

Brain-computer interface (BCI) systems are proposed as a means of communication for locked-in patients. One common BCI paradigm is motor imagery in which the user controls a BCI by imagining movements of different body parts. It is known that imagining different body parts results in event-related desynchronization (ERD) in various frequency bands. Existing methods such as common spatial patterns (CSP) and its refinement filterbank common spatial patterns (FB-CSP) aim at finding features that are informative for classification of the motor imagery class. Our proposed method is a temporally adaptive common spatial patterns implementation of the commonly used filter-bank common spatial patterns method using convolutional neural networks; hence it is called TA-CSPNN. With this method we aim to: (1) make the feature extraction and classification end-to-end, (2) base it on the way CSP/FBCSP extracts relevant features, and finally, (3) reduce the number of trainable parameters compared to existing deep learning methods to improve generalizability in noisy data such as EEG. More importantly, we show that this reduction in parameters does not affect performance and in fact the trained network generalizes better for data from some participants. We show our results on two datasets, one publicly available from BCI Competition IV, dataset 2a and another in-house motor imagery dataset.

Traditional common spatial pattern (CSP) algorithms for upper limb neural rehabilitation face inherent challenges of overlapping cortical representations and frequency sensitivity, which hinder the decoding performance of motor imagery (MI) electroencephalogram (EEG) signals. To address these issues, this study adopts an improved discriminative filter bank CSP (DFBCSP) framework and applies it to the decoding of upper limb MI-EEG signals, achieving remarkable classification performance. EEG data were acquired from sixteen participants performing two-class (left upper limb flexion-extension vs. relaxing) and three-class (left upper limb flexion vs. right upper limb extension vs. relaxing) MI tasks. The acquired EEG data were then decomposed into nine distinct sub-bands, followed by the adoption of a mutual information-based feature selection strategy to optimize the feature sets. These optimized feature sets were subsequently input into three classification models, namely multilayer perceptron (MLP), support vector machine (SVM), and linear discriminant analysis (LDA), for MI task classification. Experimental results demonstrate that the DFBCSP + MLP method significantly outperforms the traditional CSP approach. Specifically, it achieves an accuracy of 94.83% (Kappa coefficient: 0.890) in two-class MI tasks and 86.20% (Kappa coefficient: 0.775) in three-class MI tasks. The DFBCSP + MLP framework exhibits high robustness and provides a potential technical framework and theoretical basis for future research on the rehabilitation of patients with upper limb motor dysfunction.

Motor imagery (MI)-based brain-computer interface (BCI) systems are being increasingly employed to provide alternative means of communication and control for people suffering from neuro-motor impairments, with a special effort to bring these systems out of the controlled lab environments. Hence, accurately classifying MI from brain signals, e.g., from electroencephalography (EEG), is essential to obtain reliable BCI systems. However, MI classification is still a challenging task, because the signals are characterized by poor SNR, high intra-subject and cross-subject variability. Deep learning approaches have started to emerge as valid alternatives to standard machine learning techniques, e.g., filter bank common spatial pattern (FBCSP), to extract subject-independent features and to increase the cross-subject classification performance of MI BCI systems. In this paper, we first present a review of the most recent studies using deep learning for MI classification, with particular attention to their cross-subject performance. Second, we propose DynamicNet, a Python-based tool for quick and flexible implementations of deep learning models based on convolutional neural networks. We show-case the potentiality of DynamicNet by implementing EEGNet, a well-established architecture for effective EEG classification. Finally, we compare its performance with FBCSP in a 4-class MI classification over public datasets. To explore its cross-subject classification ability, we applied three different cross-validation schemes. From our results, we demonstrate that DynamicNet-implemented EEGNet outperforms FBCSP by about 25%, with a statistically significant difference when cross-subject validation schemes are applied.

Most brain-computer interfaces (BCIs) utilize univariate features (i.e., power spectrum or amplitude) for motor imagery (MI) pattern recognition, while less attention has been paid on multivariate analysis that considers information flow between various brain areas through brain connectivity estimations. Most recently, researches have proved that connectivity features were able to characterize different MI tasks. In this study, we investigated the performance of functional connectivity features measured by phase lag index (PLI), weighted phase lag index(wPLI) and phase-locking value(PLV) on MI classification. The widely-used filter-bank common spatial pattern (FBCSP) approach was employed here for performance assessment. A linear support vector machine was trained to classify different MI tasks using two publicly-available datasets from BCI Competition III and IV. The classification results showed that connectivity features achieved classification accuracy >85% in most cases and PLI outperformed all other methods including FBCSP. Our work suggested that functional connectivity features could be utilized as a powerful tool for recognizing different motor intention.

With the advantage of providing more natural and flexible control manner, brain-computer interface systems based on motor imagery electroencephalogram (EEG) have been widely used in the field of human-machine interaction. However, due to the lower signal-noise ratio and poor spatial resolution of EEG signals, the decoding accuracy is relative low. To solve this problem, a novel convolutional neural network based on temporal-spatial feature learning (TSCNN) was proposed for motor imagery EEG decoding. Firstly, for the EEG signals preprocessed by band-pass filtering, a temporal-wise convolution layer and a spatial-wise convolution layer were respectively designed, and temporal-spatial features of motor imagery EEG were constructed. Then, 2-layer two-dimensional convolutional structures were adopted to learn abstract features from the raw temporal-spatial features. Finally, the softmax layer combined with the fully connected layer were used to perform decoding task from the extracted abstract features. The experimental results of the proposed method on the open dataset showed that the average decoding accuracy was 80.09%, which is approximately 13.75% and 10.99% higher than that of the state-of-the-art common spatial pattern (CSP) + support vector machine (SVM) and filter bank CSP (FBCSP) + SVM recognition methods, respectively. This demonstrates that the proposed method can significantly improve the reliability of motor imagery EEG decoding.

Patients suffering from severe motor neuron diseases (MND) experience motor disability and their rehabilitation has always remained a challenge. Electroencephalogram (EEG) based brain computer interface (BCI) is a system that can be used for the rehabilitation of patients suffering from amputation or from severe disease like MND, stroke, locked in syndrome (LIS); where EEG signal is acquired from brain scalp while performing certain mental task such as motor imagery, cognitive imagery etc. In the present paper brain signals i.e. EEG for 10 motor imagery movements of upper limb acquired from 4 subjects were classified. Filter Bank Common Spatial Pattern (FBCSP) algorithm was used for extracting features of EEG signal captured from 5 electrodes placed over motor cortex and mutual information is used for feature selection. Classification algorithm followed was linear Support Vector Machine (SVM) in MATLAB 2015a.

Brain–computer interface (BCI) technology uses electrophysiological (EEG) signals to detect user intent. Research on BCI has seen rapid advancement, with researchers proposing and implementing several signal processing and machine learning approaches for use in different contexts. BCI technology is also used in neuromarketing to study the brain’s responses to marketing stimuli. This study sought to detect two preference states (like and dislike) in EEG neuromarketing data using the proposed EEG-based consumer preference recognition system. This study investigated the role of feature selection in BCI to improve the accuracy of preference detection for neuromarketing. Several feature selection methods were used for benchmark testing in multiple BCI studies. Four feature selection approaches, namely, principal component analysis (PCA), minimum redundancy maximum relevance (mRMR), recursive feature elimination (RFE), and ReliefF, were used with five different classifiers: deep neural network (DNN), support vector machine (SVM), k-nearest neighbors (KNN), linear discriminant analysis (LDA), and random forest (RF). The four approaches were compared to evaluate the importance of feature selection. Moreover, the performance of classification algorithms was evaluated before and after feature selection. It was found that feature selection for EEG signals improves the performance of all classifiers.

Optimal Spatio-spectral Variable Size Subbands Filter for Motor Imagery Brain Computer Interface

Here, we present a state-of-the-art review of the research performed on the brain-computer interface (BCI) technologies with a focus on signal processing approaches. BCI can be divided into three main components: signal acquisition, signal processing, and effector device. The signal acquisition component is generally divided into two categories: noninvasive and invasive. For noninvasive, this review focuses on electroencephalogram. For the invasive, the review includes electrocorticography, local field potentials, multiple-unit activity, and single-unit action potentials. Signal processing techniques reviewed are divided into time-frequency methods such as Fourier transform, autoregressive models, wavelets, and Kalman filter and spatiotemporal techniques such as Laplacian filter and common spatial patterns. Additionally, various signal feature classification algorithms are discussed such as linear discriminant analysis, support vector machines, artificial neural networks, and Bayesian classifiers. The article ends with a discussion of challenges facing BCI and concluding remarks on the future of the technology.

Motor Imagery (MI) based Brain Computer Inter-face (BCI) is a promising neurorehabilitation tool for treating motor impaired stroke survivors. It enables the MI electroencephalogram (EEG) signals to be converted/mapped into customized robotic and assisting commands. Even though stroke causes varying effects in the brain, the EEG signals have shown promises towards the MI classification of post-stroke subjects. This paper presents a MI based left and right wrist dorsiflexion classification performed on 6 stoke subjects. The MI EEG data are recorded from 16 electrode locations on the subject’s scalp. Three different feature extraction methods are used to compare and find the best performing one; the first one is based on the Wavelet Packet Decomposition (WPD) combined with Higher Order Statistics (HOS) which is compared with the widely used Common Spatial Pattern (CSP) and Filter Bank Common Spatial Pattern (FBCSP) filter method. The MI classifications are performed using Random Forest (RF) algorithm to achieve a mean accuracy that exceeds 70% for the WPD+HOS method, while outperforming the CSP and FBCSP based methods.