Improvement of Internet of Things (IoT) Interference Based on Pre-Coding Techniques over 5G Networks

Multiple input multiple output (MIMO) technology has evolved over the past few years into a technology with great potential to drive the direction of future wireless communications. MIMO technology has become a solid reality when massive MIMO systems (MIMO with large number of antennas and transceivers) were commercially deployed in several countries across the world in the recent past. Moreover, MIMO has been integrated into state-of-the-art paradigms such as fifth-generation (5G) networks as one of the main enabling technologies. MIMO possesses many attractive and highly desirable properties such as spatial multiplexing, diversity gains, and adaptive beamforming gains that leads to high data rates, enhanced reliability, and other enhancements. Nevertheless, beyond 5G technologies demand wireless communication systems with, among other properties, immensely higher data rates and better reliability simultaneously at the same time. In this work, a new, novel MIMO technique for simultaneously achieving multiplexing and diversity gains as well as completely eliminating any processing at the MIMO receiver, leading to advantages such as low complexity and low power consumption, is proposed. The proposed technique employs the design of interference-canceling matrices, which are calculated from the channels between the transceiver antennas, where the matrices are employed at the base station to help achieve multiplexing and diversity gains simultaneously. The novelty and efficiency of the introduced paradigm is demonstrated via mathematical models and validated by Monte Carlo simulations. Results indicate that the proposed system outperforms conventional MIMO models.

Multiple-Input Multiple-Output (MIMO) technologies utilize multiple antennas at the transceivers and enable enhanced diversity or multiplexing gain. The first implementations of MIMO technology appeared in cellular communication and Wi-Fi systems. One of the main problems with early MIMO systems is their limited performance in meeting the requirements of next generation communication systems. Specifically, the parameters like peak data rates, spectrum efficiency and energy efficiency constraints cannot be met with existing MIMO architectures. Hence, early MIMO techniques evolved to massive MIMO (mMIMO) type of communication as the number of antennas at both transmitters and receivers increased. Included in 5G New Radio standard, mMIMO enabled an increase the spectral efficiency and coverage compared with earlier MIMO techniques. Nowadays, there exists an ever-increasing interest in the application of advanced MIMO technologies in 6G networks. These applications include ultra massive MIMO (mMIMO), holographic MIMO and intelligent reflecting surface (IRS) assisted MIMO. These new advanced MIMO techniques either employ larger number of antennas or extremely large aperture arrays compared with mMIMO and are named as extremely large-scale MIMO. This paper presents a detailed overview of all these techniques. Joint design of wireless communication and radar sensing, named as integrated sensing and communication (ISAC) as well, has shown to improve spectrum efficiency and reduce power consumption. Recent novel research on ISAC exploits the application of MIMO technology specifically in joint communication and radar sensing (JCS) systems. In this aspect, the other objective of this work is to exploit MIMO communication and MIMO radar coexistence. After summarizing the current state of the art on MIMO radar systems, this paper exploits joint application of advanced MIMO communication and radar sensing. Finally, it aims to offer a perspective on future research directions and the potential of overall MIMO systems discussed in the paper.

3rd Generation Partnership Project (3GPP) has recently completed the specification of the Long Term Evolution (LTE) standard. Majority of the world's operators and vendors are already committed to LTE deployments and developments, making LTE the market leader in the upcoming evolution to 4G wireless communication systems. Multiple input multiple output (MIMO) technologies introduced in LTE such as spatial multiplexing, transmit diversity, and beamforming are key components for providing higher peak rate at a better system efficiency, which are essential for supporting future broadband data service over wireless links. Further extension of LTE MIMO technologies is being studied under the 3GPP study item to meet the requirement of IMT-Advanced set by International Telecommunication Union Radiocommunication Sector (ITU-R). In this paper, we introduce various MIMO technologies employed in LTE and provide a brief overview on the MIMO technologies currently discussed in the LTE-Advanced forum.

Multiple-input multiple-output (MIMO) technology equips the transmitters with the multiple antennas. It can combine with energy harvesting (EH) to lift the spectrum efficiency and make use of a greener energy resource. A power grid is added to serve as a supplementary source to regulate the not-so-stable harvested energy supply of the system. Besides the MIMO technology being used, the power allocated to the user provided by both EH and the power grid is subject to the epoch power upper bound constraints. The background of these constraints comes from field requirements, such as avoiding the saturation of power allocated to the user(s), avoiding system-level out-of-band power leakage, and reducing interference with other transmitter(s) due to the non-linearity generated via the transmitting mechanisms to the user(s). The epoch power upper bound constraints make this problem more challenging, with the controllable power grid energy budget and its allocation. This paper applies our recently proposed geometric water-filling with group upper bounded power constraints and recursion machinery to form the proposed algorithm for solving the proposed throughput maximization problem. Our algorithm is precisely defined, and further provides the exact solution via the lower degree polynomial complexity. This point is very suitable for the massive MIMO system. To the best of our knowledge, no prior algorithm has been reported in the open literature to solve the targeted problem in this paper.

Wireless signal reflecting, scattering or refracting causes the generation of multipath effects. Multipath causes multiple copies of the same wireless signal, These copies to different path to reach the receiver. The signal generated by a copy of the same produce serious interference. MIMO (Multiple-Input Multiple-Output) technology can make the interference caused by the multipath significantly reduced. In this paper, in the context of indoor and outdoor, through TP-LINK-WR845N (MIMO 2*2, which have 2 launching antennas and 2 receiving antennas) to verify the superior performance of this technology under indoor condition, at the same time we discover that the MIMO technology does not increase the coverage under outdoor condition, because there is only the power gain, no diversity gain.

With the rapid development of wireless communication technology and the emergence of intelligent applications, higher requirements have been put forward for data communication and computing capacity. Multi-access edge computing (MEC) can handle highly demanding applications by users by sinking the services and computing capabilities of the cloud to the edge of the cell. Meanwhile, the multiple input multiple output (MIMO) technology based on large-scale antenna arrays can achieve an order-of-magnitude improvement in system capacity. The introduction of MIMO into MEC takes full advantage of the energy and spectral efficiency of MIMO technology, providing a new computing paradigm for time-sensitive applications. In parallel, it can accommodate more users and cope with the inevitable trend of continuous data traffic explosion. In this paper, the state-of-the-art research status in this field is investigated, summarized and analyzed. Specifically, we first summarize a multi-base station cooperative mMIMO-MEC model that can easily be expanded to adapt to different MIMO-MEC application scenarios. Subsequently, we comprehensively analyze the current works, compare them to each other and summarize them, mainly from four aspects: research scenarios, application scenarios, evaluation indicators and research issues, and research algorithms. Finally, some open research challenges are identified and discussed, and these indicate the direction for future research on MIMO-MEC.

This chapter is attempted to provide a survey of the advanced concepts and related issues involved in Multiple Input Multiple Output (MIMO) systems. MIMO system technology has been considered as a really significant foundation on which to build the next and future generations of wireless networks. The chapter addresses advanced MIMO techniques such as polarization diversity and antenna selection. We gradually provide an overview of the MIMO features from basic to more advanced topics. The first sections of this chapter start by introducing the key aspects of theMIMO theory. TheMIMO systemmodel is first presented in a genericway. Then, we proceed to describe diversity schemes used in MIMO systems. MIMO technology could exploit several diversity techniques beyond the spatial diversity. These techniques essentially cover frequency diversity, time diversity and polarization diversity. We further provide the reader with a geometrically based models for MIMO systems. The virtue of this channel modeling is to adopt realisticmethods for modeling the spatio-temporal channel statistics from a physical wave-propagation viewpoint. Two classes for MIMO channel modeling will be described. These models involve the Geometry-based Stochastic ChannelModels (GSCM) and the Stochastic channel models. Besides the listedMIMO channel models already described, we derive and discuss capacity formulas for transmission over MIMO systems. The achieved MIMO capacities highlight the potential of spatial diversity for improving the spectral efficiency of MIMO channels. When Channel State Information (CSI) is available at both ends of the transmission link, the MIMO system capacity is optimally derived by using adaptive power allocation based on water-filling technique. The chapter continues by examining the combining techniques for multiple antenna systems. Combining techniques are motivated for MIMO systems since they enable the signal to noise ratio (SNR) maximization at the combiner output. The fundamental combing techniques are the Maximal Ratio Combining (MRC), the Selection Combining (SC) and the Equal Gain Combining(EGC). Once the combining techniques are analyzed, the reader is introduced to the beamforming processing as an optimal strategy for combining. The use of multiple antennas significantly improves the channel spectral efficiency. Nevertheless, this induces higher system complexity of the communication system and the communication system performance is effected due to correlation between antennas that need to be deployed at the same terminal. As such, the antenna selection algorithm for MIMO systems is presented. To elaborate on this point, we introduce Space time coding techniques for MIMO systems and we evaluate by simulation the performance of the communication system. Next, we emphasis on multi polarization techniques for MIMO systems. As a background, we presume that the reader has a thorough understanding of antenna theory. We recall the basic antenna theory and concepts that are used throughout the rest of the chapter. We rigorously introduce the 3D channel model over the Non-Line of Sight (NLOS) propagation channel for MIMO system with polarized antennas. We treat the depolarization phenomena and we study its effect on MIMO system capacity. The last section of the chapter provides a scenario for collaborative sensor nodes performing distributed MIMO system model which is devoted to sensor node localization in Wireless Sensor Networks. The localization algorithm is based on beamforming processing and was tested by simulation. Our chapter provides the reader by simulation examples for almost all the topics that have been treated for MIMO system development and key issues affecting achieved performance.

The Internet of Things (IoT) has had a considerable influence on our daily lives by enabling enhanced connection of devices, systems, and services that extends beyond machine-to-machine interactions and encompasses a wide range of protocols, domains, and applications. However, despite privacy concerns shown by IoT users, little has been done to reduce and protect individual information exposure. It is extremely difficult to mitigate IoT devices from reidentification threats which is why it is still a major challenge for IoT users to securely protect their information. The trust controls how we regulate privacy in our IoT platforms in the same way that it governs personal relationships. As IoT devices become increasingly linked, more data is shared across individuals, businesses, governments, and ecosystems. Technologies, sensors, machines, data, and cloud connections all rely largely on trust relationships that have been formed. With the rapid growth of additional types of IoT devices that are being introduced, it, therefore, expands privacy concerns and is difficult to develop trust with an IoT system or device without the option to regulate information privacy settings. Privacy has always been a barrier for many devices as they race for the early adoption of IoT technologies. Several Internet of Things devices or systems will continue to pose privacy threats. As a result, the main objective of this study was to examine the individual understanding of privacy and to promote information privacy protection awareness not only to IoT users but also to organizations that use IoT devices or platforms to run their day-to-day business operations. Furthermore, the objective extends to compare user knowledge and concerns about IoT privacy, as well as to identify any common attitudes and variances. However, in terms of enhancing individuals’ knowledge, an artifact was developed to educate and enhance information privacy awareness among IoT users. A pre- and postquestionnaire was generated to test and validate user knowledge regarding information privacy protection in IoT. The study was conducted using a quantitative research method. Findings indicate that IoT users’ awareness of information privacy protection turned out to be average, suggesting a need for education and awareness. Several participants stated that information privacy protection awareness is required within the community to educate, raise awareness, eliminate human error, and enable individuals to be conscious of their privacy when surfing the Internet.

The Internet of Things (IoT) devices is able to communicate with another IoT devices in heterogeneous environments. They are also able to create a network by their own using wireless capabilities without a centralized approach. This network is called wireless mobile ad hoc network (MANET). The MANET facilitate IoT devices to communicate with each other in an infrastructure less network of the Internet of Things environment. The IoT devices can dynamically join, create connection and exchange information among them. The role of cloud in this framework is to store and process the data by IoT devices. The communication Security has been raised as one of the most critical issues of cloud computing where resolving such an issue would result in a constant growth in the use and popularity of cloud. Our purpose of this study is to create a framework for providing the communication in an integrated framework of Cloud and MANET among IoT devices. Our main contribution links a new study that integrates cloud computing to the MANET and provides communication to the internet of things. This study can be used in the framework of the Internet of Things in future.

MIMO (Multiple Input Multiple Output) enabled systems are characterized by higher reliability and transmission rates, as compared to conventional SISO (Single Input Single Output) systems. However, unless administered properly, the MIMO technology may not facilitate very high throughputs on point-to-point wireless links. Therefore, it becomes imperative for the network architect to design such networks in ways that fully exploit the inherent properties of MIMO. In this paper, we first conduct an extensive experimental study, using a powerful hardware platform, in order to understand the behavior of MIMO links in different topological scenarios. Our experiments involve scenarios with MIMO links in isolation, as well as in competition with other MIMO and SISO links. Second, we perform measurements with different commercial platforms towards assessing the ability of each platform to efficiently support the MIMO technology. Based on our experimental observations we deduce that the CPU processing speed of the underlying hardware platform is an important factor that can hide the performance benefits of a MIMO enabled tranceiver. We comment on the applicability of the different hardware choices that we test; furthermore, we suggest the most appropriate choice for building a MIMO testbed, taking into account the cost, the extend-ability and the re-usability of the selected platform. Finally, having adopted this choice in our testbed design, we provide a description of our testbed architecture.

ABSTRACTIn recent years, the emerging development of Internet of things (IoT) has created new opportunities for IoT service provider, device manufacturer and customer (end user). In agriculture, employing IoT can help reducing manpower as well as standardizing agricultural processes, thus increasing the benefit for customer who does agricultural business. Beside the opportunities, there are also issues while doing maintenance for an agricultural IoT system. One of them is how to automate the process to detect faults of IoT devices in a large deployment area. While previous studies focus on investigating algorithms as well as theoretical model to detect faults for specific IoT devices, automatically expanding of IoT management process for detecting faults of sensor/actuator has not been investigated yet. To achieve this, we should be able to deal with the relationship between IoT device manufacturer, service provider and customer. In this study, we conceptualize the knowledge of IoT devices, management process and fault detection requirement. To realize this model, we introduce a runtime system to expand the IoT management process for detecting sensor/actuator faults which is able to provide the above features. We do several experiments to show the effectiveness and usefulness of the proposed solution.

Research Article| March 01, 2016 The Internet of Geophysical Things: Raspberry Pi Enhanced REF TEK (RaPiER) System Integration and Evaluation Frank Sepulveda; Frank Sepulveda aDepartment of Geology, Baylor University, One Bear Place #97354, Waco, Texas 76798 U.S.A.frank_sepulveda@baylor.edu Search for other works by this author on: GSW Google Scholar Jay Pulliam Jay Pulliam aDepartment of Geology, Baylor University, One Bear Place #97354, Waco, Texas 76798 U.S.A.frank_sepulveda@baylor.edu Search for other works by this author on: GSW Google Scholar Author and Article Information Frank Sepulveda aDepartment of Geology, Baylor University, One Bear Place #97354, Waco, Texas 76798 U.S.A.frank_sepulveda@baylor.edu Jay Pulliam aDepartment of Geology, Baylor University, One Bear Place #97354, Waco, Texas 76798 U.S.A.frank_sepulveda@baylor.edu Publisher: Seismological Society of America First Online: 14 Jul 2017 Online Issn: 1938-2057 Print Issn: 0895-0695 © 2016 by the Seismological Society of America Seismological Research Letters (2016) 87 (2A): 345–357. https://doi.org/10.1785/0220150234 Article history First Online: 14 Jul 2017 Cite View This Citation Add to Citation Manager Share Icon Share Facebook Twitter LinkedIn MailTo Tools Icon Tools Get Permissions Search Site Citation Frank Sepulveda, Jay Pulliam; The Internet of Geophysical Things: Raspberry Pi Enhanced REF TEK (RaPiER) System Integration and Evaluation. Seismological Research Letters 2016;; 87 (2A): 345–357. doi: https://doi.org/10.1785/0220150234 Download citation file: Ris (Zotero) Refmanager EasyBib Bookends Mendeley Papers EndNote RefWorks BibTex toolbar search Search Dropdown Menu toolbar search search input Search input auto suggest filter your search All ContentBy SocietySeismological Research Letters Search Advanced Search ABSTRACT The proliferation of commercial Internet of Things (IoT) devices is raising consumers’ awareness of the benefits of enhancing everyday objects with the ability to communicate, sense, and process information. Commercial‐off‐the‐shelf (COTS) versions of the embedded technologies responsible for the rise of the IoT are easy‐to‐use, inexpensive, and relatively powerful. IoT Makers, technological do‐it‐yourself enthusiasts, utilize these technologies and the IoT ecosystem to create IoT devices that range from casual hobbyist to entrepreneurial in nature.In an effort to develop a “no‐engineer‐needed” Internet of Geophysical Things (IoGT) device, we integrated a COTS embedded computer with a geoscience‐related COTS data acquisition system (DAS). Using skills common to geoscientists, we integrated the Raspberry Pi System‐On‐Chip with the REF TEK (a Trimble brand) 130‐01 DAS. This Raspberry Pi enhanced REF TEK (RaPiER) provides IoGT Makers a platform for the development of geoscientific sensor node or network enhancements. IoGT Makers can use the RaPiER to tinker with IoT capabilities while simultaneously acquiring research‐quality data. Geoscientific (i.e., seismic) application areas that may benefit from RaPiER, particularly RaPiER nodal processing, include earthquake and engineering seismology.In this article, we discuss the emerging technologies that allow IoGT Makers to build their own IoGT device. We review our selection of the Raspberry Pi and REF TEK 130‐01 for IoGT device integration. We provide a RaPiER system integration guide and REF TEK interface software compiled for the Raspberry Pi ( available in the electronic supplement to this article). We present methods to expand RaPiER capabilities using the Raspberry Pi’s ecosystem. Last, we discuss our evaluation of RaPiER’s performance and its suitability for realistic field deployments. You do not have access to this content, please speak to your institutional administrator if you feel you should have access.

Internet of Things (IoT) is an emerging technology that consists of tiny sensors embedded with IoT devices used in e-Health, smart cities and assisted living. IoT devices are equipped with constrained power, memory, and computing capabilities, which creates new security challenges. By integrating sensors and wireless technologies, this cutting-edge technology automates numerous routine tasks in different domains. The main goal of advancing IoT in the existing healthcare system is to automate the monitoring of hospitals and patients’ health by spreading goodwill toward the IoT vision. IoT has gained popularity on practically all platforms that are available. This paper presents a remote patient health monitoring and diagnosis system that uses Message Queuing Telemetry Transport protocol (MQTT) and Internet of Things (IoT) devices with one time pad cryptography. The proposed plan offers end-to-end data secrecy for an IoT system using MQTT that enables e-health and mobility. Patients’ movements inside nursing homes and healthcare facilities are also managed safely without the need for periodic reconfigurations. Prior to communicating through the MQTT protocol, this secure crypto scheme encrypts the message on both the publisher and subscriber ends. According to the results, the proposed scheme is more efficient than delegation-based architecture in terms of security and lightweight communication. The proposed system established communication between patients and medical experts using IoT technologies to alleviate the hospital strain caused by congestion in medical treatment and enable an expressway of medical responses. According to our results the proposed scheme has low computational overhead compared to other solutions that use conventional encryption to guarantee robust protection against most of the IoT security attacks.

Seeing is not always believing: Insights on IoT manufacturing from firmware composition analysis and vendor survey

With the advancement in science and technology, the demand for electronic Internet of Things (IoT) devices has increased to store and process digital data. With the advancement in IoT technology, we are more reliant on IoT devices to perform our regular tasks. IoT Forensics deals with the investigation of IoT devices such as smartphones, tablets, smart watches, or any device which is connected to the Internet. The data on these devices can still be retrieved via IoT forensics even if they are destroyed, resold, or misplaced. Before discarding any IoT device, we must consider how to secure the data stored on them. We are then going to discuss the several types of personal data that could be retrieved from discarded IoT devices. Finally, we are going to discuss the protection measures for the safe disposal of IoT devices.