Improving Data Aggregation in IoT Sensor Networks Using Self-Organizing Maps and Firefly Optimization Algorithm.

An energy efficient authentication scheme for cluster-based wireless IoT sensor networks

Monitoring environmental conditions can be done effectively with the help of the Internet of Things (IOT) sensor network. Massive data generated by IOT sensor networks presents technological hurdles in terms of storage, processing, and querying. A Hadoop cloud platform is suggested as a fix for the issue. The data processing platform makes it possible for one node's work to be shared with others employing the time and workload genetic algorithm (TWLGA), which lowers the risk of software and hardware compatibility while simultaneously increasing the efficiency of a single node. For the experiment, a Hadoop cluster platform employing the TWLGA scheduling algorithm is built, and its performance is assessed. The outcomes demonstrate that processing huge volumes of data from the IOT sensor network is acceptable for the Hadoop cloud platform .

In this paper, we proposed a novel method to solve the coverage control problem of sensor networks in the Internet of Things (IoT). The coverage control is an important index to evaluate the performance of network services. Ensuring the quality of network services, it is mainly to maximize the coverage of the network and minimize the energy consumption at the same time for the purpose of extending the network life cycle effect. Because of the overlay redundancy, it adopts the sleeping scheduling mechanism of nodes. The optimal solution is obtained after utilizing the coverage rate and the node sleep rate as the optimization objective function. Particle swarm optimization (PSO) is a group intelligent optimization algorithm. In practical applications, PSO often convergence in the local optimal solution prematurely. In order to balance the global search ability and convergence speed of PSO, We have improved the PSO based on the resampling technique, named resampled PSO (RPSO). The RPSO can not only maintain the diversity of the population, which can avoid premature convergence of the algorithm to some extent, but also ensure that each particle is active, reducing the calculation of redundancy, thereby improving the efficiency of the algorithm. The experimental results show that the RPSO can deal with complex multipeak optimization problem efficiently and reliably. Then the RPSO is used to solve the coverage control problem of sensor networks in IoT and has a great performance.

Internet of Things (IoT) sensor networks comprise a set of sensors and actuators to observe the physical environment. As the sensors are battery powered, the reduction in energy consumption plays a vital role to achieve energy efficiency and maximized network lifetime. To achieve, this chapter introduces a new energy-efficient clustering using metaheuristic quasi-oppositional krill herd (QOKHC) algorithm for IoT sensor networks. The proposed QOKHC algorithm incorporates the concept of quasi-oppositional-based learning in the krill herd algorithm to increase the convergence rate. The presented QOKHC algorithm has the capability of selecting the cluster heads properly and organizes clusters in the network. The efficiency of the QOKHC-based clustering technique has been assessed and the results are examined under diverse measures: residual energy, network lifetime, alive node analysis, and the number of packets transmitted to base station. The obtained simulation outcome stated the superior energy efficiency performance of the QOKHC technique over the compared methods.

Over the last few decades, the proliferation of the Internet of Things (IoT) has produced an overwhelming flow of data and services, which has shifted the access control paradigm from a fixed desktop environment to dynamic cloud environments. Fog computing is associated with a new access control paradigm to reduce the overhead costs by moving the execution of application logic from the centre of the cloud data sources to the periphery of the IoT-oriented sensor networks. Indeed, accessing information and data resources from a variety of IoT sources has been plagued with inherent problems such as data heterogeneity, privacy, security and computational overheads. This paper presents an extensive survey of security, privacy and access control research, while highlighting several specific concerns in a wide range of contextual conditions (e.g., spatial, temporal and environmental contexts) which are gaining a lot of momentum in the area of industrial sensor and cloud networks. We present different taxonomies, such as contextual conditions and authorization models, based on the key issues in this area and discuss the existing context-sensitive access control approaches to tackle the aforementioned issues. With the aim of reducing administrative and computational overheads in the IoT sensor networks, we propose a new generation of Fog-Based Context-Aware Access Control (FB-CAAC) framework, combining the benefits of the cloud, IoT and context-aware computing; and ensuring proper access control and security at the edge of the end-devices. Our goal is not only to control context-sensitive access to data resources in the cloud, but also to move the execution of an application logic from the cloud-level to an intermediary-level where necessary, through adding computational nodes at the edge of the IoT sensor network. A discussion of some open research issues pertaining to context-sensitive access control to data resources is provided, including several real-world case studies. We conclude the paper with an in-depth analysis of the research challenges that have not been adequately addressed in the literature and highlight directions for future work that has not been well aligned with currently available research.

Smart agriculture, Smart Cities and Industrial automation bring the concept of Internet of Things (IoT) with technical support of wireless Sensor Networks (WSNs). Performance constraints of all these applications are energy and lack of communication during data transfer. Intelligent Bluefin Clustering Protocol (IBCP) resolves these problems with integration of Bluefin Swarm Optimization (BFSO) along with fuzzy control techniques for identifying best cluster-head in the network. Multi-objective fitting function included with the protocol for optimizing consumption of energy, latency between nodes and reliability of the communication between nodes. Entire process was carried out by MATLAB R2023b that offer 37% of enhanced lifetime of the network, 22% of lesser latency between nodes and 7% of increased packet delivered ratio, indicates its effectiveness and scalability in WSN IoT enabled platforms.

This paper presents a real-time remote water level monitoring system based on dense wavelength division multiplexing (DWDM)-passive optical fiber sensor (OFS) network for the application of the Internet of Things (IoT). This network employs a broadband light source based on amplified spontaneous emission (ASE) as a seed light. This ASE light is spectrum-sliced by an athermal type arrayed waveguide grating (200 GHz × 16 channel), then distributed towards multiple sensing units (SU). Here, 16 SUs are installed vertically at the specified height in the water pool according to the design specification (i.e., spatial resolution). Then, each SU reflects an optical spectrum having a different reflection coefficient depending on the surrounding medium (e.g., air or water). By measuring these reflected optical spectra with an optical spectrum analyzer, the water level can be easily recognized in real time. However, as the sensing distance increases, system performance is severely degraded due to the Rayleigh Back-Scattering of the ASE light. As a result, the remote sensing capability is limited at a short distance (i.e., <10 km). To overcome this limitation, we propose a simple signal processing technique based on feature extraction of received optical spectra, which includes embedding a peak detection algorithm with a signal validation check. For the specific, the proposed signal processing performs the peak power detection, signal quality monitoring, and determination/display of the actual water level through three function modules, i.e., data save/load module, signal processing module, and Human–Machine Interface display module. In particular, the signal quality of the remote sensing network can be easily monitored through several factors, such as the number of spectral peaks, the wavelength spacing between neighboring peaks and the pattern of detected peak power. Moreover, by using this validation check algorithm, it is also possible to diagnose various error types (such as peak detection error, loss of data and so on) according to the pattern of measured optical spectra. As a result, the IoT sensor network can recognize 17 different level statuses for the water level measurement from a distance of about 25 km away without active devices such as optical amplifiers (i.e., passive remote sensing).

Internet of things (IoT) is a network of connected devices that work together and exchange information. In IoT, things or devices means any object with its own IP address that is able to connect to a network and can send and receive using internet. Examples of IoT devices are computers, laptops, smart phones, and objects that are operational with chips to collect and correspond data over a network. The range of internet of things devices is huge. Consumers use smart phones to correspond with IoT devices.

The development of the Internet of Things (IoT) technology has achieved remarkable results in recent years. A large number of sensors and machinery are connected, and combined with the Internet, to achieve intelligent management and operation. However, the traditional centralized IoT data management solution inevitably encounters challenges of data trust, security, sustainability, and user privacy is difficult to guarantee. This paper takes the intelligent transportation sensor network as an example and proposes a blockchain-based Internet of Vehicles (IoV) data secure sharing scheme (called IoVChain), which implements automatic registration, rapid authentication, and reliable sharing method of IoV data through smart contract. The smart contract performs homomorphic encryption and zero-knowledge proof processing on the sensitive part of the data, and this part exists in the form of ciphertext on the blockchain. We adopt PBFT consensus mechanism to ensure the consistency of the entire network ledger, and all the IoV data processing and usage procedure is stored in the Merkle-tree-based block, which cannot be tampered with. Compared with the centralized IoV data management solution, the IoVChain scheme avoids the risk of single point of failure, and keeps the IoV data credible, available, and tamper-resistant under the premise of privacy and security, so that the data can be traced when needed. We have implemented the IoVChain scheme based on the consortium blockchain for trusted and secure sharing of IoV data. Finally, analysis and evaluation show that the proposed IoVChain scheme is feasible, safe, and extensible for the secure sharing of IoV data.

The intensification of global climate change and the significant increase of extreme rainfall events have made traditional urban drainage systems face great adjustments. As a key component of green infrastructure to avoid urban flood risk, green roofs are receiving increasing attention due to their unique capabilities in stormwater management. This paper explores the potential of Internet of Things (IoT) technology and sensor networks to enhance green roof stormwater management. Integrated real-time monitoring of key environmental parameters, including soil moisture, temperature and rainfall, enables the system to dynamically adjust roof drainage and irrigation strategies. This greatly improves the rainwater retention capacity and reduces the pressure on the municipal sewage system. The results show that the combination of IoT technology and sensor networks not only improves the efficiency of green roof management in combating climate change, but also promotes the efficient use of water resources and enhances the adaptability and sustainability of the system. This research provides the necessary technical support for the wider adoption of green roofs in urban environments and offers viable solutions to future challenges posed by climate change.

The Internet of Things (IoT) envisions the interconnection of all electronic devices, ushering in a new technological era. IoT and 5G technology are linked, complementing each other in a manner that significantly enhances their impact. As sensors become increasingly embedded in our daily lives, they transform everyday objects into “smart” devices. This synergy between IoT sensor networks and 5G creates a dynamic ecosystem where the infrastructure provided by 5G’s high-speed, low-latency communication enables IoT devices to function more efficiently and effectively, paving the way for innovative applications and services that enhance our awareness and interactions with the world. Moreover, application-oriented and multifunctional antennas need to be developed to meet these high demands. In this review, a comprehensive analysis of IoT antennas is conducted based on their application characteristics. It is important to note that, to the best of our knowledge, this is the first time that this categorization has been performed in the literature. Indeed, comparing IoT antennas across different applications without considering their specific operational contexts is not practical. This review focuses on four primary operational fields: smart homes, smart cities, and biomedical and implantable devices.

The Internet of Things (IoT) sensor network plays a crucial role in monitoring electricity consumption behavior by collecting real-time data from various connected devices. Utilizing cluster analysis algorithms, researchers can effectively segment and analyze consumption patterns within a network environment. By grouping similar usage behaviors, these algorithms reveal insights into energy efficiency, peak usage times, and anomalies in consumption. The paper presents a novel methodology for analyzing and classifying users' electricity consumption behavior, utilizing the Clustering Behavior Analysis Weighted Classification (CBAWC) algorithm. By leveraging cluster analysis techniques and weighted classification, the proposed approach allows for the segmentation of consumers into distinct clusters based on their consumption patterns. Through the application of CBAWC, the study provides insights into the diverse behaviors exhibited by consumers, ranging from moderate to high consumption levels, varied peak hours, and peak days. The classification results demonstrate the effectiveness of the algorithm in accurately assigning users to their respective clusters, enabling stakeholders to better understand consumption trends and tailor energy management strategies accordingly. Through the application of CBAWC, consumers are segmented into distinct clusters based on their consumption patterns. For example, clusters exhibit varying average daily consumption levels, with Cluster 1 consuming around 300 kWh, Cluster 2 consuming approximately 450 kWh, and Cluster 3 consuming about 280 kWh on average. Additionally, clusters display different peak hours per day and peak days per month. The classification results demonstrate the algorithm's effectiveness, with high accuracy scores ranging from 0.86 to 1.00 across different user groups.

Sensors and actuators play a vital role in realizing the Internet of Things (IoT) applications. The data transmission capability from edge devices to servers and vice-versa enables IoT applications to be more realistic and effective. However, one of the major challenges to IoT applications is power management at the edge devices. The power consumption of the edge devices depends on the amount of data transferred through the network in a defined interval. Data size and its applicability to the receiving device are controllable parameters, and consequently, energy efficiency can be improved. This work aims to establish an IoT architecture using a message queuing telemetry transport (MQTT) protocol that effectively handles the data transmission in the network. It also provides a solution for the elimination of data redundancy; hence, the network was effectively utilized, and the energy consumption was reduced in the edge devices. The proposed architecture was demonstrated with a potentiometer as a data generator and MQTT as a message broker. Further, the transmitted data was received at the edge devices and its performance was analyzed. Based on the results, it was verified that the client was able to receive the data without any loss in terms of precision. Data redundancy was avoided by disabling the data transmission whenever the nodeMCU identifies the constant sensor value. This retains the power at the edge devices and data transmission devices.

This study investigates the deployment of artificial intelligence (AI)–supported structural health monitoring (SHM) systems for in-service bridges using Internet of Things (IoT) sensor networks, a rapidly advancing domain that merges cutting-edge sensing, communication, and data analytics to improve infrastructure safety and durability. Traditional bridge inspections and early wired SHM systems have faced persistent limitations, including manual data interpretation, latency in damage detection, and scalability barriers due to cost and complexity. Recent breakthroughs in wireless IoT technologies, multi-modal sensor fusion, and AI-based analytics now offer the potential for continuous, automated, and highly reliable monitoring of structural integrity across diverse bridge typologies and environmental conditions. To critically synthesize the state of knowledge, this systematic review analyzed 146 peer-reviewed papers published between 2000 and 2022 spanning civil engineering, computer science, and information systems. The review explored key dimensions: (a) the historical evolution and objectives of SHM in bridge engineering; (b) IoT sensor modalities and network architectures enabling large-scale monitoring; (c) AI techniques for damage classification, anomaly detection, and signal feature engineering; (d) system reliability and data integrity strategies including calibration, drift compensation, and cybersecurity; (e) deployment challenges and scalability considerations across steel and concrete bridges; (f) comparative field case studies and lessons from global smart infrastructure programs; and (g) emerging research directions such as digital twins, blockchain data provenance, climate-resilient AI, and hybrid human–AI decision systems. The findings indicate that AI-enhanced SHM significantly improves predictive damage detection, reduces false alarms, and supports timely maintenance decisions, especially when combined with multi-sensor IoT networks and robust data governance. However, challenges remain in standardization, model retraining under concept drift, cost–benefit justification for large-scale deployment, and regulatory acceptance of AI-informed safety decisions. The review also highlights knowledge gaps around extreme climate resilience, secure and scalable data management, and human oversight frameworks for trustworthy AI. By consolidating insights across 146 studies, this work provides an integrated roadmap for researchers, engineers, and policymakers aiming to advance the next generation of smart, resilient, and cost-effective bridge monitoring systems.

In this paper, we investigate the physical layer security (PLS) performance for the Internet of Things (IoT), which is modeled as an IoT sensor network (ISN). The considered system consists of multiple power transfer stations (PTSs), multiple IoT sensor nodes (SNs), one legitimate fusion center (LFC) and multiple eavesdropping fusion centers (EFCs), which attempt to extract the transmitted information at SNs without an active attack. The SNs and the EFCs are equipped with a single antenna, while the LFC is equipped with multiple antennas. Specifically, the SNs harvest energy from the PTSs and then use the harvested energy to transmit the information to the LFC. In this research, the energy harvesting (EH) process is considered in the following two strategies: 1) the SN harvests energy from all PTSs, and 2) the SN harvests energy from the best PTS. To guarantee security for the considered system before the SN sends the packet, the SN’s power is controlled by a suitable power policy that is based on the channel state information (CSI), harvested energy, and security constraints. An algorithm for the nearly optimal EH time is implemented. Accordingly, the analytical expressions for the existence probability of secrecy capacity and secrecy outage probability (SOP) are derived by using the statistical characteristics of the signal-to-noise ratio (SNR). In addition, we analyze the secrecy performance for various system parameters, such as the location of system elements, the number of PTSs, and the number of EFCs. Finally, the results of Monte Carlo simulations are provided to confirm the correctness of our analysis and derivation.