Improving Machine Learning Predictive Capacity for Supply Chain Optimization through Domain Adversarial Neural Networks

Design analysis and performance prediction of packed bed latent heat storage system employing machine learning models

Optimized machine learning models for predicting crown convergence of plateau mountain tunnels

This study presents the first application of Machine Learning (ML) models to optimise Powder Bed Fusion using Laser Beam (PBF-LB) process parameters for H13 steel fabricated on a 350 °C preheated building platform. A total of 189 cylindrical specimens were produced for training and testing machine learning (ML) models using variable process parameters: laser power (250-350 W), scanning speed (1050-1300 mm/s), and hatch spacing (65-90 μm). Eight ML models were investigated: 1. Support Vector Regression (SVR), 2. Kernel Ridge Regression (KRR), 3. Stochastic Gradient Descent Regressor, 4. Random Forest Regressor (RFR), 5. Extreme Gradient Boosting (XGBoost), 6. Extreme Gradient Boosting with limited depth (XGBoost LD), 7. Extra Trees Regressor (ETR) and 8. Light Gradient Boosting Machine (LightGBM). All models were trained using the Fast Library for Automated Machine Learning & Tuning (FLAML) framework to predict the relative density of the fabricated samples. Among these, the XGBoost model achieved the highest predictive accuracy, with a coefficient of determination R2=0.977, mean absolute percentage error MAPE = 0.002, and mean absolute error MAE = 0.017. Experimental validation was conducted on 27 newly fabricated samples using ML predicted process parameters. Relative densities exceeding 99.6% of the theoretical value (7.76 g/cm3) for all models except XGBoost LD and KRR. The lowest MAE = 0.004 and the smallest difference between the ML-predicted and PBF-LB validated density were obtained for samples made with LightGBM-predicted parameters. Those samples exhibited a hardness of 604 ± 13 HV0.5, which increased to approximately 630 HV0.5 after tempering at 550 °C. The LightGBM optimised parameters were further applied to fabricate a part of a forging die incorporating internal through-cooling channels, demonstrating the efficacy of machine learning-guided optimisation in achieving dense, defect-free H13 components suitable for industrial applications.

For effective management of water quantity and quality, it is absolutely essential to estimate the pollution level of the existing surface water. This case study aims to evaluate the performance of twelve machine learning (ML) models, including five boosting-based algorithms (adaptive boosting, gradient boosting, histogram-based gradient boosting, light gradient boosting, and extreme gradient boosting), three decision tree-based algorithms (decision tree, extra trees, and random forest), and four ANN-based algorithms (multilayer perceptron, radial basis function, deep feed-forward neural network, and convolutional neural network), in estimating the surface water quality of the La Buong River in Vietnam. Water quality data at four monitoring stations alongside the La Buong River for the period 2010–2017 were utilized to calculate the water quality index (WQI). Prediction performance of the ML models was evaluated by using two efficiency statistics (i.e., R2 and RMSE). The results indicated that all twelve ML models have good performance in predicting the WQI but that extreme gradient boosting (XGBoost) has the best performance with the highest accuracy (R2 = 0.989 and RMSE = 0.107). The findings strengthen the argument that ML models, especially XGBoost, may be employed for WQI prediction with a high level of accuracy, which will further improve water quality management.

This study highlights drought forecasting for understanding the semi-arid area in India, where drought phenomena play vital role in the irrigation, drinking water supplies, and sustaining the ecological with economic balance for every nation. Therefore, drought forecasting is important for the future drought planning based on the machine learning (ML) models. Hence, The Standardized Precipitation Index (SPI) at 3- and 6-month periods have been selected and used for future drought forecasting scenarios in area. The combinations of ten inputs SPI-1- and SPI-10 were used for predicting modeling for SPI-3 and SPI-6 timescales, that modeling developed based on the historical SPI datasets from 1989 to 2019 years. The SPI-3 and SPI-6 maximum and minimum values are shown SPI-3 (2.03 and -5.522) and SPI-6 (1.94 and -6.93). The SPI is a popular method for estimating the drought analysis and has been used everywhere at global level. The developed models have been compared with each other, with the best combination of input variables selected using subset regression models and sensitivity studies. After that, the active input parameters were used for forecasting of SPI-3 and SPI-6 values to understanding of drought in semi-arid area. The finest input variables combination have been used in the Ml models and established the novel five models such as robust linear regression, bagged trees, boosted trees, support vector regression (SVM-Linear), and Matern Gaussian Process Regression (Matern GPR) models. Such kind of models first time has been applied for the forecasting of future drought conditions. Whole models were fine and improved modeling by using hyperparameters tuning, bagging, and boosting models. Entire ML models’ accuracy was compared using different statistical metrics. Compared with five ML models accuracy, we have found that the Matern GPR model better accuracy than other ML models. The best model accuracy is R2 = 0.95 and 0.93, RMSE, MSE, MAE, MARE, and NSE values, respectively, for predicting SPI-3 and SPI-6 values in the area. Therefore, the Matern GPR model was identified as the finest ML algorithm for predicting SPI-3 and SPI-6 associated with other algorithms. This research demonstrates the Matern GPR model's efficacy in predicting multiscale SPI-3 and SPI-6 under climate variations. It can be helpful in soil and water resource conservation planning and management and understanding droughts in the entire basin areas of the country India.

Location-aware green energy availability forecasting for multiple time frames in smart buildings: The case of Estonia

Social determinants of health (SDOH) play a critical role in the onset and progression of chronic kidney disease (CKD). Despite the well-established role of SDOH, previous studies have not fully incorporated these factors in predicting CKD in Type 2 diabetes patients. To bridge this gap, this study aimed to develop and evaluate the machine learning (ML) models that incorporate SDOH to enhance CKD risk prediction in Type 2 diabetes patients. Data were obtained from the 2023 Behavioral Risk Factor Surveillance System (BRFSS), a national survey that collects comprehensive health-related data from adults across the United States. Missing data were addressed using the K-nearest neighbor imputation method, and the Synthetic Minority Oversampling Technique (SMOTE) was applied to balance class distributions. Potential predictive features were selected using correlation coefficient analysis. The dataset was partitioned into training (80%) and testing (20%) subsets, with a 3-fold cross-validation strategy applied to the training data. Seven ML models were developed for CKD risk prediction, including logistic regression (LR), decision tree (DT), K-nearest neighbor (KNN), random forest (RF), eXtreme Gradient Boosting (XGBoost), and an artificial neural network (ANN). Model performance was evaluated using multiple metrics, including the area under the receiver operating characteristic curve (AUROC), precision, recall, F1 score, accuracy, and false positive rate. The study included 19,912 Type 2 diabetes patients (weighted sample size: 818,878), among whom 2,924 (weighted 13.92%) had CKD, and 16,988 (weighted 86.08%) did not. Over half of the CKD group (50.4%) were aged 65 or older. The proportion of female patients was higher in both groups, comprising 53.8% of the CKD group and 50.5% of the non-CKD group. Among the ML models evaluated, the RF model demonstrated the highest predictive performance for CKD, with an AUROC of 0.89 (95% CI: 0.88 - 0.90), followed by the DT model (0.84, 95% CI: 0.83 - 0.85) and XGBoost (0.83, 95% CI: 0.82 - 0.84). The RF model achieved an accuracy of 0.81 (95%CI: 0.81 - 0.81), a precision of 0.79 (95%CI: 0.79 - 0.79), a recall of 0.85 (95%CI: 0.85 - 0.85), and an F1 score of 0.82 (95%CI: 0.82 - 0.82). Additionally, the RF model exhibited strong calibration, reinforcing its reliability as a predictive tool for CKD risk in individuals with Type 2 diabetes. The study findings underscore the potential of ML models, particularly the RF model, in accurately predicting CKD among individuals with Type 2 diabetes. This approach not only enhances the precision of CKD prediction but also highlights the importance of addressing social and environmental disparities in disease prevention and management. Leveraging ML models with SDOH can lead to earlier interventions, more personalized treatment plans, and improved health outcomes for vulnerable populations. The online version contains supplementary material available at 10.1007/s40200-025-01621-9.

Accurate leaf area index estimation in sorghum using high-resolution UAV data and machine learning models

Modeling of necking area reduction of carbon steel in hydrogen environment using machine learning approach

This study focuses on using various machine learning (ML) models to evaluate the shear behaviors of ultra-high-performance concrete (UHPC) beams reinforced with glass fiber-reinforced polymer (GFRP) bars. The main objective of the study is to predict the shear strength of UHPC beams reinforced with GFRP bars using ML models. We use four different ML models: support vector machine (SVM), artificial neural network (ANN), random forest (R.F.), and extreme gradient boosting (XGBoost). The experimental database used in the study is acquired from various literature sources and comprises 54 test observations with 11 input features. These input features are likely parameters related to the composition, geometry, and properties of the UHPC beams and GFRP bars. To ensure the ML models' generalizability and scalability, random search methods are utilized to tune the hyperparameters of the algorithms. This tuning process helps improve the performance of the models when predicting the shear strength. The study uses the ACI318M-14 and Eurocode 2 standard building codes to predict the shear capacity behavior of GFRP bars-reinforced UHPC I-shaped beams. The ML models' predictions are compared to the results obtained from these building code standards. According to the findings, the XGBoost model demonstrates the highest predictive test performance among the investigated ML models. The study employs the SHAP (SHapley Additive exPlanations) analysis to assess the significance of each input parameter in the ML models' predictive capabilities. A Taylor diagram is used to statistically compare the accuracy of the ML models. This study concludes that ML models, particularly XGBoost, can effectively predict the shear capacity behavior of GFRP bars-reinforced UHPC I-shaped beams.

This paper presents a data-driven approach to determine the load and flexural capacities of reinforced concrete (RC) beams strengthened with fabric reinforced cementitious matrix (FRCM) composites in flexure. A total of seven machine learning (ML) models such as kernel ridge regression, K-nearest neighbors, support vector regression, classification and regression trees, random forest, gradient boosted trees, and extreme gradient boosting (xgBoost) are evaluated to propose the best predictive model for FRCM-strengthened beams. Beam geometry, internal steel reinforcement area, FRCM reinforcement area, and mechanical characteristics of concrete, steel, and FRCM are the main input parameters included in the database. Among the studied ML models, the xgBoost model is the most accurate model with the highest coefficient of determination (R2=99.3%) and least root mean square (RMSE), mean absolute error (MAE), and mean absolute percentage error (MAPE). A comparative study of the performance of the proposed and existing analytical models revealed the superior predictive capability and robustness of the proposed model. The predicted flexural and load capacities of the beams based on the existing analytical models are highly scattered and either over-conservative or unsafe. A unified SHapley Additive exPlanations approach is employed to explain the output of the best ML model and identify the most significant input features and interactions that influence the capacity of FRCM-strengthened RC beams in flexure. Furthermore, a reliability analysis is performed to calibrate the resistance reduction factor (ϕ) to achieve a specified target reliability index (βT=3.5).

Modeling time series of vegetation indices in tallgrass prairie using machine and deep learning algorithms

Shale caprocks, often organic-rich, play a significant role in hydrogen sequestration, but their wettability is typically altered from water-wet to H2-wet due to the organic matter, compromising their sealing performance. Silica nanofluids can restore water-wet conditions, which is vital for effective containment of H2 in geological formations. However, laboratory experiments to test the effects of nanomaterials on wettability and interfacial tension (IFT) are resource-intensive and time-consuming. To address this challenge, data-driven machine learning (ML) models offer a promising alternative, allowing for the prediction of key UHS parameters—such as advancing and receding contact angles without the need for extensive laboratory testing. We have applied multiple ML models, including gradient boosting, extreme gradient boosting (XGboost), Catboost, random forest, and extra trees to predict the wettability of organic rich shale samples treated with silica nanofluids. The ML models were trained on a comprehensive dataset generated through laboratory experiments conducted under a wide range of pressure (0.5 – 1600psi) and temperature (298-323 K) conditions, using brine (1 wt.% KCl + 2 wt.% NaCl) and varying silica nanofluid concentrations (0.05–1.0 wt.%). Advanced visualization techniques, including swarm maps, box plots, and heatmap plots, were utilized to analyze the experimental dataset thoroughly. To enhance the generalization capabilities of the ML models, we employed Bayesian optimization for hyperparameter tuning, along with k-fold cross-validation and grid-search optimization techniques. Both statistical and graphical analyses were performed to show the reliability and performance of the models. The results demonstrated that the implemented ML models, particularly the XGboost and Catboost, accurately predicted the wettability behavior under various operating conditions. The training and testing average R² scores were above 0.998 and 0.949, respectively, confirming the high accuracy of the predictions. These findings highlight the reliability of the ML algorithms in predicting the complex interaction between shale, brine, and H2. Further investigation into the feature importance revealed that nanomaterials had the greatest influence on the wettability of the ternary system. The silica nanofluid concentrations played a key role in modifying wettability, with varying impacts on the receding contact angles, emphasizing the effect of nanomaterial treatment. The model's predictions were consistent with experimental results, suggesting that geological conditions, including pressure and temperature, have a profound influence on rock mineral wettability, directly impacting H2 geo-storage capacity. This study is the first to employ data-driven ML models to predict critical UHS parameters in organic-rich shales treated with silica nanofluids. The ability of the ML models to predict UHS parameters across a wide range of conditions provides a valuable tool for optimizing UHS system designs, offering a more efficient and scalable approach compared to traditional experimental methods.

Enhanced root zone soil moisture monitoring using multitemporal remote sensing data and machine learning techniques

Sheet metal stamped and welded assemblies, such as the ones used in automotive body-in-white (BIW) structures, have various sources of manufacturing variations during stamping and assembly processes. One of the major contributors to these variations is the springback on clamping release due to elastic recovery. Mitigating these variations requires expert knowledge of mechanical behavior, tooling, and process design. No analytical models can be used for the variety of geometries. Nonlinear FEA is also being used to predict springback, but it is time-consuming and requires specialized expertise, which makes it difficult to use in design exploration. Machine learning holds the promise of democratizing such complex analyses. This paper presents several case studies for data curation/generation, ML training, and validation. The prediction and quantification of the effects of springback are done on two levels: (i) low granularity, which involves predicting variations in certain parameters that are critical to measuring and understand spring back, and (ii) high granularity, predicting the shape of the component while taking into account the effects of springback and the stresses in the components. The data required to train, test, and validate the ML models were generated previously using an automated, integrated multi-stage simulation approach that was necessary to produce large datasets. Stamping simulations were validated against NUMISHEET benchmarks and also compared to test results published by other researchers. Subsequently, machine learning models were trained on the curated dataset to predict 2D stamped component shapes after springback and stress distributions across these shapes. For the assembly dataset, parameters such as unconstrained planar minimum zone magnitudes, angles between component planes, and twist angles are predicted using machine learning models, including linear and polynomial regression, decision trees, gradient boosting regression, support vector regression, and fully connected neural networks, and compared for their performance using consistent metrics. Hyper-parameter tuning is performed to optimize model performance, with artificial neural networks demonstrating promising capabilities in understanding variations in forming and multi-stage assembly processes.