- Conference Article
15
- 10.2514/6.2002-252
Optical microsensors for fluid flow diagnostics
- Jan 14, 2002
- D Wilson + 3 more +3
Optical microsensors for fluid flow diagnostics
We present a diffractive optics design for incoherent imaging with an extendable field-of-view. In our design method, multiple layers of diffractive optical elements (DOEs) are synthesized so that images on the input plane illuminated with spatially incoherent light are reproduced upright on the output plane. Once this DOE cascade is calculated, the field-of-view can be extended by using an array of such DOEs without further calculation. We derive the optical condition to calculate the DOEs and numerically demonstrate the proposed method with the condition.
Loading PDF
Optical microsensors for fluid flow diagnostics
Optical microsensors for fluid flow diagnostics
A high volume precision compression molding process of glass diffractive optics by use of a micromachined fused silica wafer mold and low Tg optical glass
Recent advances in compression molding of glass optical elements for mass production offer the potential of extending this technology to elements with micro and nano scale features. In this research, glass diffractive optical elements (DOEs) with lateral features in the order of 10 µm and vertical height of 330 nm were fabricated using a fused silica glass mold and a special low Tg (glass transition temperature) glass material K-PG325. Molded DOEs were studied using an atomic force microscope (AFM) and scanning electron microscope (SEM) to evaluate the glass molding process capability. Optical testing of the molded DOEs was a further demonstration of the effectiveness of the molding process for high volume micro and diffractive optical component fabrication. The combination of two high-precision, high-volume processes, i.e., semiconductor batch process for optical mold making and glass molding for DOE replication, is an effective alternative manufacturing method for high-quality, low-cost optical components. The reported experiment is a detailed illustration of the glass molding process capability. With further process optimization a robust manufacturing process can be developed for mass production of diffractive and micro glass optical elements.
Read moreReplication of diffractive optics
In recent years surface-relief Diffractive Optical Elements (DOEs), a specialized class of diffractive optical elements, have revolutionized design of optical systems and instruments. Surface-relief diffractive optical components improve performance of the existing optical systems and increase systems compactness and reliability. Surface-relief DOEs can be fabricated as multilevel binary optical elements, or as continuous surface-relief optical elements. A surface-relief DOE is being designed such that incident light interacts with the topography of the surface-relief microstructure including the size and shape characteristics of surface profile features such as indentations and projections as well as their dimensional relationship, to perform a desired optical function. Binary optical elements are being made by the same microlithographic and ion etching techniques used to produce VLSI circuits. Computer-generated continuous surface-relief DOE is recorded by direct laser-beam or e-beam writing in photoresist. Continuous surface-relief DOE can be also recorded in photoresist by interferometric (holographic) technique. After development recorded in photoresist surface-relief microstructures are being ion-beam etched into quartz or other inorganic optical substrates.
Read moreNovel approach for manufacturing of continuously shaped diffractive optical elements
Optical lithography with its 193nm technology is pushed to reach and shift its limits even further. There is strong demand on innovations in illumination part of exposure tools. Current illumination systems consisting of diffractive and refractive optical elements offer numerous benefits such as optimized laser beam shape with high homogeneity and high numerical aperture enabling high efficiency. LIMO's unique production technology is capable to manufacture free form surfaces on monolithic arrays larger than 250mm with high precision and reproducibility. Different kinds of intensity distributions with best uniformities or customized profiles have been achieved by using LIMO's refractive optical elements. Recently LIMO pushed the limits of this lens production technology and was able to manufacture first diffractive optical elements (DOE) based on continuous relief's profile. Beside for the illumination devices in lithography, DOEs find wide use in optical devices for other technological applications, such as optical communications and data processing. Up to now DOE designs follow the principle of phase diffraction gratings. Its diffraction structure with a periodic phase profile performs a superposition of beams with predefined energy ratios. Due to the application for high precise laser-beam shaping and beam splitting in optical technologies and optical fiber networks, number of grating orders is increased up to some tens or even hundreds. Classic lithographic technologies lead to quantized (step-like) profiles of diffractive micro-reliefs, which causes a decrease of beam splitter's diffractive efficiency. The newest development of LIMO's microlens fabrication technology allows us to make a step from free programmable microlens profiles to diffractive optical elements with high efficiency. Our first results of this approach are demonstrated in this paper. Diffractive beam splitters are presented. A special mathematical method is used to design diffractive optical elements with continuous surface profiles. Comparison between theoretical simulations and experimental results shows very good correlation.
Read moreHybrid diffractive optics design via hardware-in-the-loop methodology for achromatic extended-depth-of-field imaging.
End-to-end optimization of diffractive optical elements (DOEs) profile through a digital differentiable model combined with computational imaging have gained an increasing attention in emerging applications due to the compactness of resultant physical setups. Despite recent works have shown the potential of this methodology to design optics, its performance in physical setups is still limited and affected by manufacturing artefacts of DOE, mismatch between simulated and resultant experimental point spread functions, and calibration errors. Additionally, the computational burden of the digital differentiable model to effectively design the DOE is increasing, thus limiting the size of the DOE that can be designed. To overcome the above mentioned limitations, a co-design of hybrid optics and image reconstruction algorithm is produced following the end-to-end hardware-in-the-loop strategy, using for optimization a convolutional neural network equipped with quantitative and qualitative loss functions. The optics of the imaging system consists on the phase-only spatial light modulator (SLM) as DOE and refractive lens. SLM phase-pattern is optimized by applying the Hardware-in-the-loop technique, which helps to eliminate the mismatch between numerical modelling and physical reality of image formation as light propagation is not numerically modelled but is physically done. Comparison with compound multi-lens optics of a last generation smartphone and a mirrorless commercial cameras show that the proposed system is advanced in all-in-focus sharp imaging for a depth range 0.4-1.9 m.
Read moreAccelerating diffractive optics design with GPU-based parallel technique
In this paper GPU based data parallel technique is used to reduce calculating time in diffractive optics elements (DOE) design. By using compute unified device architecture (CUDA) framework, comparison of acceleration radio of some major methods using in DOE design, including Gerchberg Saxton algorithm for global optimization in conjunction with Rayleigh-Sommerfeld diffractive integrating transformation, genetic algorithm with a finite-difference time-domain method and simulated annealing algorithm, is made with demonstrational DOE-lens design, whose focal spot size is 0.5 μm, incident light wavelength is 650 nm, focal length is 3mm, DOE aperture size is 2mm.
Read moreDiffractive Optic Synthesis and Analysis of Light Fields and Recent Applications
The synthesis and analysis of light fields having specific properties are the main issues in diffractive optics. Light field synthesis technology with diffractive optical elements can provide actual solutions for various applications that require extraordinary optical functions. Also, the rigorous analysis of a light field is an essential element for the design and application of micro- or nanoscale diffractive optical elements. In this paper we review the theoretical aspects of the diffractive optic synthesis and analysis of light fields, and present some recent applications of diffractive optical elements for information, nano-, and biotechnologies.
Read moreGeneralized design of diffractive optical elements using neural networks
Diffractive optical elements (DOE) utilize diffraction to manipulate light in optical systems. These elements have a wide range of applications including optical interconnects, coherent beam addition, laser beam shaping and refractive optics aberration correction. Due to the wide range of applications optimal design of DOE has become an important research problem. In the design of the DOEs, existing techniques utilize the Fresnel diffraction theory to compute the phase at the desired location at the output plane. Since this process involves solving nonlinear integral equations, various numerical methods along with robust optimization algorithms have been proposed. However all the algorithms proposed so far assume that the size and the spacing of the elements as independent variables in the design of optimal diffractive gratings. Therefore search algorithms need to be called every time the required geometry of the elements changes, resulting in a computationally expensive design procedure for systems utilizing a large number of DOEs. In this work, we have developed a novel algorithm that uses neural networks with multiple hidden layers to overcome this limitation and arrives at a general solution for the design of the DOEs for a given application. Inputs to this network are the spacing between the elements and the input/output planes. The network outputs the phase gratings that are required to obtain the desired intensity at the specified location in the output plane. The network was trained using the back-propagation technique. The training set was generated by using genetic algorithm approach as described in literature. The mean square error obtained is comparable to conventional techniques but with much lower computational costs.
Read moreLimits of scalar diffraction theory and an iterative angular spectrum algorithm for finite aperture diffractive optical element design
We have designed high-efficiency finite-aperture diffractive optical elements (DOE's) with features on the order of or smaller than the wave-length of the incident illumination. The use of scalar diffraction theory is generally not considered valid for the design of DOE's with such features. However, we have found several cases in which the use of a scalar-based design is, in fact, quite accurate. We also present a modified scalar-based iterative design method that incorporates the angular spectrum approach to design diffractive optical elements that operate in the near-field and have sub-wavelength features. We call this design method the iterative angular spectrum approach (IASA). Upon comparison with a rigorous electromag-netic analysis technique, specifically, the finite difference time-domain method (FDTD), we find that our scalar-based design method is surprisingly valid for DOE's having sub-wavelength features.
Read moreDiffractive optical array element for realizing uniform spot on the plane non-perpendicular to the optical axis with geometrical shape transform
Diffractive optical array element for realizing uniform spot on the plane non-perpendicular to the optical axis with geometrical shape transform
Read moreAlignment and assembly of diffractive optical elements for optical system packaging
Free-space optical interconnects for microelectronics and multiprocessor parallel computing systems offer better scalability because less silicon area will be occupied by interconnections and they have a faster clock speed and higher bandwidth at power levels than do purely electronic systems. For stability and ruggedness optoelectronic systems that combine optics with electronics based on free space optical interconnection need to be packaged. In packaging these types of systems, diffractive optical elements (DOEs) are often used because their fabrication is compatible with VLSI fabrication and they can be flexibly designed by computer. The volume of the packaged system depends on the f-number of the DOE utilized in the system: the smaller the f-number, the more compact the packaged system. Lower f- number DOEs can be obtained by stacking more than one DOE together. Stacking also helps to achieve larger diffraction angles to facilitate longer distance interconnects. The problems to be solved are (a) accurate alignment between DOEs on the opposite sides of one substrate or between DOEs on separate substrates and (b) bonding or assembly of separate substrates. In this presentation, the alignment and assembly procedures for stacking more than one DOE together will be discussed, and the experimental results shown.
Read moreDoDo: Double DOE Optical System for Multishot Spectral Imaging
Snapshot Compressive Spectral Imaging Systems (SCSI) compress the scenes by capturing 2D projections of the encoded underlying signals. A decoder, trained with pre-acquired datasets, reconstructs the spectral images. SCSI systems based on diffractive optical elements (DOE) provide a small form factor and the single DOE can be optimized in an end-to-end manner. Since the spectral image is highly compressed in a SCSI system based on a single DOE, the quality of image reconstruction can be insufficient for diverse spectral imaging applications. This work proposes a multishot spectral imaging system employing a double-phase encoding with a double DOE architecture (DoDo), to improve the spectral reconstruction performance. The first DOE is fixed and provides the benefits of the diffractive optical systems. The second DOE provides the variable encoding of the multishot architectures. The work presents a differentiable mathematical model for the multishot DoDo system and optimizes the parameters of the DoDo architecture in an end-to-end manner. The proposed system was tested using simulations and a hardware prototype. To obtain a low-cost system, the implementation uses a deformable mirror for the variable DOE. The proposed DoDo system shows an improvement of up to 4dB in PSNR in the reconstructed spectral images compared with the single DOE system.
Read moreSingle-element diffractive optical system for real-time processing of synthetic aperture radar data
I present an optical system for the polar formatting of data in a spotlight-mode synthetic aperture radar. This system is implemented with only one diffractive optical element (DOE). Previously such a DOE could not be produced because the phase of the required transmission function of the DOE does not obey the continuity condition, which is a prerequisite for the conventional implementation of such optical transforms. Here I show how a DOE can be produced to perform the complete polar-formatting transform by incorporating branch-point phase singularities in the transmission function of the DOE. The computation of the transmission function is shown, and numerically computed diffraction patterns obtained from this DOE are also shown.
Read moreTip of the hat
Researchers from China have proposed a hollow top-hat beam (HTB) diffractive optical element (DOE) shaping method, for use in space uplink chaotic communications systems (SUCCS). Simulation results show that by shaping the beam into a HTB, the bit error-rate (BER) improvement is substantial when compared to the traditional hollow Gaussian beam (HGB). The results could be significant for the optimisation of designs relating to SUCCS. Laser communication is a type of communication technique that, unsurprisingly, uses laser beams as a signal carrier, allowing the transmission of images, sound and other data in free space. It has been conceptualised since the development of the first lasers in the 1960s. When compared to more traditional microwave communication, laser communication has the advantages of allowing faster transmission due to higher data-rate (in principle anywhere from 1,000 to 100,000 times faster), a larger communication capacity, smaller terminal size and lower power consumption. It is anticipated that, due to its higher data-rate, laser communication will be the preferred candidate for the problem of bottlenecking when it comes to space uplink communications. Prof Mi Li (left of centre) and his research group. (a) original Gaussian distribution of laser beam (b) hollow Gaussian beam (HGB) shaped by DOE (c) hollow top-hat beam (HTB) shaped by DOE. Space chaotic laser communication system. Reducing the complexity of designing laser communications systems is a hot topic in the research field of free-space communication. Optical antennas play an important role, where they function as beam collators, expanders and convergers – all of which can improve the performance of free-space communication. One of the most commonly used antennas is the Cassegrain reflective optical antenna, featuring a short mirror body, high magnification and elimination of spherical aberrations (which result in blurry images due to numerous undesired focal points). Cassegrain antennas do come with a drawback, however, in that the secondary mirror can block part of the transmission beam, affecting the transmission efficiency of the optical system. The work presented in this issue of Electronics Letters is applicable to space chaotic laser communications systems, which are more complex than ground optical fiber chaotic communication systems. The authors use a DOE to shape a carrier beam into a hollow, top-hat shape (see inset images). DOEs have been widely used in the field of beam-shaping due to the advantages of high diffraction efficiency, flexible design and simple structure. Intelligent shaping of the beam can eliminate the problem of secondary mirrors in a Cassegrain antenna blocking part of the transmission beam. It can also be used to improve the transmission efficiency of the optical sub-system, meaning that the design pressure on other sub-system parameters is eased. DOEs can be used to shape and split laser beams in an energy-efficient manner and are often used in production facilities for laser material processing, or in medical laser treatments and diagnostics. They also see use in lighting, printing and lithography. In short, DOEs are frequently used in areas where shaping and splitting with minimal light loss is necessary. In order to effectively demonstrate how their suggested HTB improves the quality of the communication system, the authors use BER to evaluate their work. They also compare the HTB to a HGB, which they used in previous research works, to see if there is any difference in quality when considering the two shapes for SUCCS. The research considers strong and weak atmospheric conditions, as atmospheric turbulence also plays a role in the BER of signals moving between Earth and orbit. The work shows that, at higher beam power, BER is reduced by around 10−0.9 when using the HTB shaping method at a low chaotic mismatch and 10−1.5 at a high chaotic mismatch. In both scenarios the HTB shaping outperforms the HGB shaping, showing that the HTB is more suitable for SUCCS. In recent years there have been a number of exciting achievements in the free-space laser communication field. Laser communication has moved from concept to practice, Mbps rates to Gbps rates and we are now seeing the next iteration of communication technology. Research scientists are carrying out research work on small-size, high-speed laser communication stations. The work presented here not only improves the efficiency of the beam, but also makes steps towards reducing the design difficulty of other sub-systems within the communication terminal. The authors hope that this work will also allow a meshing of 5G ground wireless communications and space laser communications networks, and even pave the way for easier realisation of 6G in the future.
Read moreExperiment evaluation of speckle suppression efficiency of 2D quasi-spiral M-sequence-based diffractive optical element.
The quasi-spiral 2D diffractive optical element (DOE) based on M-sequence of length N=15 is designed and manufactured. The speckle suppression efficiency by the DOE rotation is measured. The speckle suppression coefficients of 10.5, 6, and 4 are obtained for green, violet, and red laser beams, respectively. The results of numerical simulation and experimental data show that the quasi-spiral binary DOE structure can be as effective in speckle reduction as a periodic 2D DOE structure. The numerical simulation and experimental results show that the speckle suppression efficiency of the 2D DOE structure decreases approximately twice at the boundaries of the visible range. It is shown that a replacement of this structure with the bilateral 1D DOE allows obtaining the maximum speckle suppression efficiency in the entire visible range of light.
Read more