Incorporating color feature on LBP-based image retrieval

A rapid growth in medical ultrasound database makes it difficult for medical practitioners to manage and search relevant data with good efficiency. Hence, a novel image retrieval technique using Mean Distance Local Binary Pattern (Mean Distance LBP) has been proposed for content-based image retrieval. The conventional local binary pattern (LBP) converts every pixel of image into a binary pattern based on their relationship with neighbourhood pixels. The proposed feature descriptor differs from local binary pattern as it transforms the mutual relationship of all neighbouring pixels in a binary pattern based on their standard deviation templates as well as Euclidean distance from the center pixel. Color feature and Gray Level Co-occurrence Matrix have also been used in this work. To prove the excellence of the proposed method, experiments have been conducted on two different databases of natural images and face images. Further, the method is applied on real time ultrasound database for retrieval of liver images from a set of ultrasound images of various organs. The performance has been observed using well-known evaluation measures, precision and recall, and compared with some state-of-art local patterns. Comparison shows a significant improvement in the proposed method over existing methods.

Studies have been actively undertaken on image retrieval from a large-capacity image database, particularly on image retrievals such as natural image retrieval, character image retrieval or trademark retrieval from a streaming image database. In retrieving a character image, either color or shape information is used for the key feature information. However, changes in the shape of a character image often makes it difficult to retrieve solely based on the shape information, requiring a new retrieval method where both color and shape information are taken into consideration. We present a highly effective method for retrieving or matching similar character images even when shape information differs substantially. In our approach, combined features of color and shape information are used for image retrieval; an image is first split into sectors; color information is extracted from the sector images followed by quantization using Parzen window to extract features; an image is then retrieved by means of bipartite matching using the features. Our results show the retrieval rate using the combined information increases substantially for matching natural or character images compared with the results obtained by the combination of two features independently.

Most image classification algorithms consist of feature extraction and image classification. Hence, feature extraction is a critical step for obtaining an accurate classification result. In this study, we perform the classification experiments based on the image features extracted using Local Binary Pattern operator (LBP), Discrete Wavelet Transforms (DWT) and Color Features (CF) for image classification. A comparison is made using the different combination of features; 1) LBP features only, 2) LBP and DWT features, and 3) LBP, DWT and CF features with a slight modification. Our goal is to determine what types of features are useful for improving the classification results. The Linear Support Vector Machine (SVM) algorithm is used to classify each pixel into a class based on the features used to obtain a classified image. Preliminary experimental results show that the hybrid of DWT, LBP, and CF gives the highest accuracy.

With huge and ever-growing products in the factory, image retrieval can help the worker retrieve the same, or similar, existing products rapidly and accurately to guide production. In this paper, an effective method based on Fourier transform and local binary pattern is proposed to improve the retrieval efficiency of wool fabric. After capturing the fabric image, histogram equalization was implemented on the value of the Hue, Saturation, Value (HSV) mode to enhance the contrast. Subsequently, Fourier transform together with local binary pattern operator were performed to obtain the frequency spectrum and the local binary pattern, respectively. Each frequency spectrum was divided into 22 rings with the same width, and the standard deviation of the frequencies in each ring was calculated as a Fourier feature. Distinct output values of each local binary pattern were counted and normalized as local binary pattern features. Finally, Euclidean distance was adopted to measure the similarity based on the Fourier feature and local binary pattern feature. Twenty thousand wool fabric images were captured to demonstrate the efficacy of the proposed method. Experimental results indicate that the framework is effective and superior for image retrieval of wool fabric, providing referential assistance for the worker in the factory and improving retrieval efficiency.

This paper proposes three image features for use in image retrieval. The first image feature is based on color distribution and is called an adaptive color histogram (ACH). The second and third image features, called adaptive motifs co-occurrence matrix (AMCOM) and gradient histogram for adaptive motifs (GHAM), are based on color and texture features, respectively. ACH uses three steps, including cluster drop, auto cluster merge and auto cluster split to improve the K-mean algorithm. AMCOM is commonly used and is a generally conventional AMCOM. GHAM estimates the average gradient of pixels in a motif of pattern blocks and creates a histogram of the average gradient corresponding to motifs of pattern blocks. We integrate ACH, AMCOM and GHAM to form an AMCGH system to facilitate a more accurate and efficient image retrieval system. To present the performance of the proposed system, four different image databases, including gray texture images, two types of color texture images and color natural images, are tested and analyzed.

Content-based image retrieval (CBIR) systems utilize low level query image feature as identifying similarity between a query image and the image database.Image contents are plays significant role for image retrieval.There are three fundamental bases for content-based image retrieval, i.e. visual feature extraction, multidimensional indexing, and retrieval system design.Each image has three contents such as: color, texture and shape features.Color and texture both plays important image visual features used in Content-Based Image Retrieval to improve results.Color histogram and texture features have potential to retrieve similar images on the basis of their properties.As the feature extracted from a query is low level, it is extremely difficult for user to provide an appropriate example in based query.To overcome these problems and reach higher accuracy in CBIR system, providing user with relevance feedback is famous for provide promising solution.

In this chapter, a content-based image retrieval technique based on the concept of region-based image retrieval has been described. This technique integrates color, texture, and shape features using local binary patterns (LBPs). In this technique, the image is divided into a fixed number of blocks and from each block LBP-based color, texture, and shape features are computed. The color and texture features are extracted using LBP histograms of quantized color image and gray-level images, respectively. Shape features are computed using the binary edge map obtained using Sobel edge detector from each block. All three features are combined to make a single completed binary region descriptor (CBRD) represented in the LBP way. To support region-based retrieval, an effective region code-based scheme is employed. In this technique, the spatial relative locations of objects are also considered to increase the retrieval accuracy.

This paper proposes a novel face representation approach, local Gabor binary mapping pattern (LGBMP), for multi-view gender classification. In this approach, a face image is first represented as a series of Gabor magnitude pictures (GMP) by applying multi-scale and multi-orientation Gabor filters. Each GMP is then encoded as a LGBP image where a uniform local binary pattern (LBP) operator is used. After that, each LGBP image is divided into non-overlapping rectangular regions, from which spatial histograms are extracted. Although an LGBP feature vector can be obtained by fitting together the regional histograms, it can not be employed in pattern classification due to its high dimension. We propose that each regional LGBP feature be mapped onto a one-dimensional subspace independently before they are concatenated as a whole feature vector. This is attractive since we reduce the feature dimension and also preserve the spatial information of LGBP image. Two ways have been proposed to map the regional LGBP feature in this paper. One is so-called LGBMP-LDA using linear discriminant analysis (LDA) for dimensionality reduction while the other is to project the regional LGBP feature onto the class center connecting line, namely, LGBMP-CCL. As a result, despite several decades of Gabor filters, the final feature dimension is even less than that of the feature extracted by using LBP directly on gray-scale images. The classification tasks in our work are performed by support vector machines (SVM). The experimental results on the CAS-PEAL face database indicate that the proposed approach achieves higher accuracy than the others such as SVMs+Gray-scale pixel, SVMs+Gabor and SVMs+LBP approach, more particularly, it has the lowest dimension of feature vector.

Research in content-based image retrieval today is a lively discipline, expanding in breadth. Discovering new and innovative processes of locating a desired image from an expanding collection of images has been a major area of interest for many professional fields. This has led to the increasing use of a technique called Content Based Image Retrieval which is used to retrieve images based on low-level features which are automatically driven such as color, shape and texture. CBIR draws many of its methods from the field of image processing and computer vision and can be regarded as subset of that field. Using this technique, the entire database may be searched to find the most closely matching image. In this paper, color and texture features of an image have been used to retrieve all the similar images from the image database. For this purpose, Block Color Histogram as color feature and Gray-level Co-occurrence Matrix (GLCM) and Gabor wavelets as texture features have been used. The proposed approach is very efficient since it uses the prominent and distinct features of an image useful for effective image retrieval using fuzzy heuristics according to human visual system.

Histogram refinement for texture descriptor based image retrieval

An image retrieval system was developed purposely to provide an efficient tool for a set of images from a collection of images in the large database that matches the user’s requirements in similarity evaluations such as image content similarity, edge, and colour similarity. Retrieving images based on the contents which are colour, texture, and shape is called content-based image retrieval (CBIR). This paper discusses and describes about the colour features technique for image retrieval systems. Several colour features technique and algorithms produced by the previous researcher are used to calculate the similarity between extracted features. This paper also describes about the specific technique about the colour basis features and combined features (hybrid techniques) between colour and shape features.

In this paper, a novel algorithm which integrates the RGB color histogram and texture features for content based image retrieval. A new set of two- dimensional (2-D) M-band dual tree complex wavelet transform (M_band_DT_CWT) and rotated M_band_DT_CWT are designed to improve the texture retrieval performance. Unlike the standard dual tree complex wavelet transform (DT_CWT), which gives a logarithmic frequency resolution, the M-band decomposition gives a mixture of a logarithmic and linear frequency resolution. Most texture image retrieval systems are still incapable of providing retrieval result with high retrieval accuracy and less computational complexity. To address this problem, we propose a novel approach for image retrieval using M_band_DT_CWT and rotated M_band_DT_CWT (M_band_DT_RCWT) by computing the energy, standard deviation and their combination on each subband of the decomposed image. To check the retrieval performance, two texture databases are used. Further, it is mentioned that the databases used are Brodatz gray scale database and MIT VisTex Color database. The retrieval efficiency and accuracy using proposed features is found to be superior to other existing methods. Index Terms—Color; M-band wavelets; Feature Extraction; M-band dual tree complex wavelets; Image Retrieval.

Serving as an effective texture description operator, local binary pattern (LBP) has been applied in the visible face recognition successfully. In order to enhance the recognition performance, the technology of face recognition depending on the near infrared (NIR) image has attracted extensive attention in the recent years. Although the characteristics of LBP have been researched in optical image thoroughly, the development of these do not catch enough attention in the NIR image at all. Therefore, in our paper, we study the characteristics of LBP from the following two aspects in NIR image. On one hand, we come to the probability distribution of various patterns of LBP in the NIR facial image. On the other hand, we discuss the influence to LBP caused by the illumination change in facial image.

This paper proposes a new pattern-based feature called local mesh ternary pattern for biomedical image indexing and retrieval. The standard local binary patterns (LBP) and local ternary patterns (LTP) encode the greyscale relationship between the centre pixel and its surrounding neighbours in two-dimensional (2D) local region of an image, whereas the proposed method encodes the greyscale relationship among the neighbours for a given centre pixel with three selected directions of mesh patterns which is generated from 2D image. The novelty of the proposed method is that it uses ternary patterns from mesh patterns of an image to encode more spatial structure information which leads to better retrieval. The experiments have been carried out for proving the worth of proposed algorithm on three different types of benchmarked biomedical databases; (i) computed tomography (CT) scanned lung image databases named as LIDC-IDRI-CT and VIA/I–ELCAP-CT, (ii) brain magnetic resonance imaging (MRI) database named as OASIS-MRI. The results demonstrate that the proposed method yields better performance in terms of average retrieval precision and average retrieval rate over state-of-the-art feature extraction techniques like LBP, LTP, local mesh pattern, etc.

Recently, the research in multispectral face recognition has focused on developing an efficient framework that is capable of capturing and fusing the salient features from different spectral bands. However, few studies have explored the texture description to analyse the multispectral data. The local binary pattern (LBP) operator is one of the most powerful, attractive, and simple texture descriptor showing excellent results in terms of accuracy and computational complexity in many empirical studies. Motivated by the efficiency of this texture descriptor, we propose an extension of the basic LBP to evoke multispectral imagery analysis for face recognition. The proposed descriptor, called Multispectral Local Binary Pattern (MSLBP) captures the mutual relationships between the pixels in the different spectral bands. First, Gradient face is applied to address the variation in face images illumination. Then, the resulting MSLBP method provides input to PCA, LDA, and KFA classifiers for face recognition. These systems are implemented and compared with existing Local Binary Pattern face recognition systems. The obtained results show that the use of the proposed texture descriptor approach permit to achieve high recognition rates.