Indoor Loop Closure Detection Based on Semantic Topology Graph Matching

Simultaneous localization and mapping (SLAM) plays a crucial role in the field of intelligent mobile robots. However, the traditional Visual SLAM (VSLAM) framework is based on strong assumptions about static environments, which are not applicable to dynamic real-world environments. The correctness of re-localization and recall of loop closure detection are both lower when the mobile robot loses frames in a dynamic environment. Thus, in this paper, the re-localization and loop closure detection method with a semantic topology graph based on ORB-SLAM2 is proposed. First, we use YOLOv5 for object detection and label the recognized dynamic and static objects. Secondly, the topology graph is constructed using the position information of static objects in space. Then, we propose a weight expression for the topology graph to calculate the similarity of topology in different keyframes. Finally, the re-localization and loop closure detection are determined based on the value of topology similarity. Experiments on public datasets show that the semantic topology graph is effective in improving the correct rate of re-localization and the accuracy of loop closure detection in a dynamic environment.

Loop closure detection (LCD) is an important module of visual SLAM (Simultaneous Localization and Mapping), which can be regarded as an image retrieval task. The correct LCD can effectively reduce the cumulative errors during visual SLAM localization and obtain a globally consistent map. The currently common approach to LCD is based on a bag-of-words (BoW) and traditional manually designed features. However, The BoW-based method ignores the spatial location information and semantic information of visual features, and image aliasing will affect the detection accuracy of the algorithm. Meanwhile, the artificially designed features are very sensitive to light changes. This paper proposes a LCD algorithm based on convolutional neural networks (CNN) to extract global and local features. Extensive experiments on six publicly available datasets have shown that the method provides high recall with 100% accuracy in most of the evaluated datasets relative to traditional algorithms and some deep learning-based methods.

Simultaneous localization and mapping (SLAM) is mainly used to solve the problem of mobile robot navigation in an unknown environment. The loop closure detection is a key step in visual SLAM and plays an important role in building consistent maps and reducing pose cumulative errors. A new loop closure detection method based on the bag of semantic word (BOSW) is proposed in this paper, extracting semantic descriptors by using a neural network pre-trained on the scene recognition data set. Traditionally, the visual bag of word (BoW) model adopts the features such as ORB and SURF which is easily affected by the environment. With advantages of better ability to deal with changes in lighting, the convolutional neural network can extract the abstract features of the image. For these reasons, we proposed a new algorithm that combines the bag of word model and the convolutional neural network. The feature maps, extracted by the VGG16 neural network which is trained on the dataset named Places365 (VGG16-Places365), are used as the semantic descriptors instead of ORB descriptors. The workflow of building the vocabulary of the semantic words, extracting the feature vector of the image and computing the similarity score is presented. The performance of BOSW is evaluated by a comparison study with the traditional visual bag of word model and Inception-based deep learning method which use Inception's fully connected layer output as the feature vector of the picture. Overall, the experiments on New College datasets verified that our mode show stronger generalization and can achieve higher accuracy in the loop closure detection.

Loop closure detection is the core part of the visual simultaneous localization and mapping (VSLAM) for autonomous robots. In the dynamic environments, loop closure detection turns to be a very difficult problem compared to the static scenario. This paper proposes a novel approach based on convolutional autoencoder neural network (CAENN) architecture for extracting images features, and then uses Euclidean loss for minimizing the difference between the extracted feature and the gist feature which has the ability of scene recognition. In order to improve the accuracy and recall rate for loop closure detection in the dynamic scenario, the perspective transformation and dynamic object are applied in the process of the construction of the training set. And by calculating the Manhattan distance between the two image feature vectors, the loop closure is accepted when the distance is smaller than the threshold. The experimental results demonstrate that the proposed method obtains better accuracy and recall rate compared to the commonly used gist feature method and has a lower cost on time and space compared to the BOW method and AlexNet method in loop closure detection.

Current visual simultaneous localization and mapping (SLAM) systems have demonstrated commendable efficacy in static environments. However, the presence of dynamic objects in real-world settings frequently leads to system discrepancies, significantly impairing the accuracy and robustness of SLAM systems. Conventional visual SLAM approaches typically utilize epipolar constraints to mitigate the impact of outliers; nevertheless, they encounter limitations when confronted with a substantial number of dynamic or planar moving objects. To tackle these issues, this paper introduces a novel dynamic visual SLAM system, termed DEG-SLAM. Initially, the system employs the YOLOv5 object detection network to identify dynamic objects, subsequently relaying the semantic information to the tracking module. During the tracking phase, both semantic information and epipolar constraints are leveraged to filter out dynamic feature points. To address the challenges posed by the malfunctioning of epipolar constraints in degenerate scenes, DEG-SLAM incorporates a degenerate constraint mechanism aimed at further eliminating dynamic feature points. Furthermore, a reprojection constraint has been introduced to enhance the filtering of absent dynamic feature points that lie outside the detection boxes. Experimental findings reveal that DEG-SLAM significantly improves accuracy and robustness when compared to traditional ORB-SLAM3 in dynamic environments. The performance benefits of DEG-SLAM are particularly evident in degenerate scenarios, thereby affirming its practicality and reliability in complex settings.

Visual Simultaneous Localization and Mapping (VSLAM) is a critical technology for intelligent mobile robots, enabling simultaneous environmental mapping and self-localization. However, reflective ground in indoor environments presents significant challenges to VSLAM systems, as it introduces noisy virtual landmarks that degrade both map accuracy and localization precision. To address these challenges, we propose a novel RGB-D VSLAM system specifically designed for these environments. Our approach begins with a carefully designed point-line-plane-based VSLAM framework, which mitigates the limitations caused by sparse point features in indoor settings. Then we analyze how reflective ground degrades VSLAM performance and propose a reflective ground feature removal strategy that integrates semantic and geometric information. To enhance robustness in highly reflective environments, we incorporate a monocular depth estimation network as a complementary module. Extensive experiments on public datasets demonstrate that our framework achieves state-of-the-art performance. And evaluations on an author-collected dataset highlight the system’s superior mapping and localization capabilities in reflective indoor environments. Furthermore, ablation studies validate the effectiveness of each proposed component, and latency tests confirm the system’s suitability for real-time applications.

In dynamic environments, performance of visual SLAM techniques can be impaired by visual features taken from moving objects. One solution is to identify those objects so that their visual features can be removed for localization and mapping. This paper presents a simple and fast pipeline that uses deep neural networks, extended Kalman filters and visual SLAM to improve both localization and mapping in dynamic environments (around 14 fps on a GTX 1080). Results on the dynamic sequences from the TUM dataset using RTAB-Map as visual SLAM suggest that the approach achieves similar localization performance compared to other state-of-the-art methods, while also providing the position of the tracked dynamic objects, a 3D map free of those dynamic objects, better loop closure detection with the whole pipeline able to run on a robot moving at moderate speed.

Deep learning has made significant breakthroughs in the tasks of image classification, detection, segmentation, etc. However, the application of deep learning in robotics is still scarce. SLAM is a fundamental problem in robotics and loop closure detection is an important part of SLAM. This paper attempts to use supervised learning methods to solve the loop closure detection problem in vision SLAM. We proposed Siamese-ResNet network, which combines Siamese network with ResNet to detect loop closure. To show the effectiveness of Siamese-ResNet, we evaluate Siamese-ResNet and FabMap2.0 on several open published datasets, like TUM SLAM dataset and FabMap SLAM dataset. Compared with FabMap2.0, Siamese-ResNet shows higher accuracy, better robustness and shorter time-consuming.

With the current rapid development of robotics technology and intelligent industrial transportation systems, the algorithms of Simultaneous Localization and Mapping (SLAM) for Automated Guided Vehicles (AGV) receive more and more researchers’ attentions. In current stage, a big challenge is how to effectively improve the pose accuracy of AGVs. When a visual SLAM has been running for a long time, the position estimation errors between frames are usually inevitably generated and accumulated to the next state, which will eventually cause the AGVs to produce pose drifts. To solve this problem, it is necessary to perform a Loop Closure Detection (LCD) and perform inter-frame constraints for remote frames. In this paper, a LCD based on a Very Deep Convolutional Networks for Large-Scale Image Recognition (VGG-19) network is proposed for improving the pose accuracies of AGVs. Experimental results show that the accuracy of this method is 6.5% higher than that of traditional Bag of Words (BoW) method.

With the development of novel RGB-D visual sensors, data association has been a basic problem in 3D Visual Simultaneous Localization and Mapping (VSLAM). To solve the problem, a VSLAM algorithm based on Multiple Iterative Closest Point (MICP) is presented. By using both RGB and depth information obtained from RGB-D camera, 3D models of indoor environment can be reconstructed, which provide extensive knowledge for mobile robots to accomplish tasks such as VSLAM and Human-Robot Interaction. Due to the limited views of RGB-D camera, additional information about the camera pose is needed. In this paper, the motion of the RGB-D camera is estimated by a motion capture system after a calibration process. Based on the estimated pose, the MICP algorithm is used to improve the alignment. A Kinect mobile robot which is running Robot Operating System and the motion capture system has been used for experiments. Experiment results show that not only the proposed VSLAM algorithm achieved good accuracy and reliability, but also the 3D map can be generated in real time.

This paper proposes an appearance-based method to detect loop closure in visual SLAM (Simultaneous Localization and Mapping). To solve this problem, we make use of omnidirectional images and the internal odometry captured by a robot in a real indoor environment. We build an appearance-based model and, subsequently, two maps of the environment are constructed, one metric and other topological with relationships between them. These relationships are updated in each step of our hybrid approach. The topological map is a graph built from the appearance information in the scenes. A new node is added when the new visual information is different enough from the previous information. At the same time, we check a possible topological loop closure with previous nodes. On the other hand we estimate the metric position of the new pose using a Monte-Carlo approach with the aim of building a metric map. The experimental results demonstrate the reasonable performance of our method.KeywordsAppearance-base descriptorOmnidirectional ImagesMonte-Carlo SLAMHybrid Metric-Topological mappingLoop closure detection

In view of existing Visual SLAM (VSLAM) algorithms when constructing semantic map of indoor environment, there are problems with low accuracy and low label classification accuracy when feature points are sparse. This paper proposed a 3D semantic VSLAM algorithm called BMASK-RCNN based on Mask Scoring RCNN. Firstly, feature points of images are extracted by Binary Robust Invariant Scalable Keypoints (BRISK) algorithm. Secondly, map points of reference key frame are projected to current frame for feature matching and pose estimation, and an inverse depth filter is used to estimate scene depth of created key frame to obtain camera pose changes. In order to achieve object detection and semantic segmentation for both static objects and dynamic objects in indoor environments and then construct dense 3D semantic map with VSLAM algorithm, a Mask Scoring RCNN is used to adjust its structure partially, where a TUM RGB-D SLAM dataset for transfer learning is employed. Semantic information of independent targets in scenes provides semantic information including categories, which not only provides high accuracy of localization but also realizes the probability update of semantic estimation by marking movable objects, thereby reducing the impact of moving objects on real-time mapping. Through simulation and actual experimental comparison with other three algorithms, results show the proposed algorithm has better robustness, and semantic information used in 3D semantic mapping can be accurately obtained.

The loop-closure detection module in visual SLAM eliminates cumulative error from the front-end by detecting the fact that the camera passes through the same place as it passed before, providing the back-end optimization with constraints among longer intervals apart from neighboring frames, resulting in globally consistent trajectories and maps. In order to solve the problem of time-consuming and poor robustness existed in feature point matching based loop-closure detection algorithm, the article uses the Bag-of-words model based on ORB features to find loop-closure and performs spatial consistency verification on results. Firstly, the ORB feature points of image data sets are clustered to construct a dictionary. In order to complete query operations within logarithmic time, the data structure of k-ary tree is adopted. K-means++ clustering is implemented layer by layer to ensure uniform clustering. Afterwards with words bag, an image is expressed by a vector. The article uses Term Frequency-Inverse Document Frequency to assess the importance of each word so as to obtain an more effective description. Finally, the article select key frames to implement the detection. In this way repetitive detection of similar loops can be avoided and coverage of the entire environment can be guaranteed .The L1 norm is used to calculate the similarity scores between key frames. The scores are normalized using a priori similarity thus avoiding the introduction of absolute similarity thresholds, which makes the algorithm more adaptable. To remove wrong loop-closure, the spatial consistency test based on Pose Graph optimization is performed on detection results. Experiments show that the loop-closure detection algorithm used in the article has a good recall rate when the accuracy rate is high.

Although tremendous progress has been made in Simultaneous Localization and Mapping (SLAM), the scene rigidity assumption limits wide usage of visual SLAMs in the real-world environment of computer vision, smart robotics and augmented reality. To make SLAM more robust in dynamic environments, outliers on the dynamic objects, including unknown objects, need to be removed from tracking process. To address this challenge, we present a novel real-time visual SLAM system, KMOP-vSLAM, which adds the capability of unsupervised learning segmentation and human detection to reduce the drift error of tracking in indoor dynamic environments. An efficient geometric outlier detection method is proposed, using dynamic information of the previous frames as well as a novel probability model to judge moving objects with the help of geometric constraints and human detection. Outlier features belonging to moving objects are largely detected and removed from tracking. The well-known dataset, TUM, is used to evaluate tracking errors in dynamic scenes where people are walking around. Our approach yields a significantly lower trajectory error compared to state-of-the-art visual SLAMs using an RGB-D camera.

Simultaneous localisation and mapping (SLAM) is crucial in mobile robotics. Most visual SLAM systems assume that the environment is static. However, in real life, there are many dynamic objects, which affect the accuracy and robustness of these systems. To improve the performance of visual SLAM systems, this study proposes a dynamic visual SLAM (SEG-SLAM) system based on the orientated FAST and rotated BRIEF (ORB)-SLAM3 framework and you only look once (YOLO)v5 deep-learning method. First, based on the ORB-SLAM3 framework, the YOLOv5 deep-learning method is used to construct a fusion module for target detection and semantic segmentation. This module can effectively identify and extract prior information for obviously and potentially dynamic objects. Second, differentiated dynamic feature point rejection strategies are developed for different dynamic objects using the prior information, depth information, and epipolar geometry method. Thus, the localisation and mapping accuracy of the SEG-SLAM system is improved. Finally, the rejection results are fused with the depth information, and a static dense 3D mapping without dynamic objects is constructed using the Point Cloud Library. The SEG-SLAM system is evaluated using public TUM datasets and real-world scenarios. The proposed method is more accurate and robust than current dynamic visual SLAM algorithms.