Integrated strategy for real-time wind power fluctuation mitigation and energy storage system control

Warships play an important role in the modern sea battlefield. Research on the line spectrum features of warship radio noise signals is helpful to realize the classification and recognition of different types of warships, and provides critical information for sea battlefield. In this paper, we proposed a novel linear spectrum frequency feature extraction technique for warship radio noise based on complete ensemble empirical mode decomposition with adaptive noise (CEEMDAN), duffing chaotic oscillator (DCO), and weighted-permutation entropy (W-PE). The proposed linear spectrum frequency feature extraction technique, named CEEMDAN-DCO-W-PE has the following advantages in comparison with other linear spectrum frequency feature extraction techniques; (i) as an adaptive data-driven algorithm, CEEMDAN has more accurate and more reliable decomposition performance than empirical mode decomposition (EMD) and ensemble EMD (EEMD), and there is no need for presetting parameters, such as decomposition level and basis function; (ii) DCO can detect the linear spectrum of narrow band periodical warship signals by way of utilizing its properties of sensitivity for weak periodical signals and the immunity for noise; and (iii) W-PE is used in underwater acoustic signal feature extraction for the first time, and compared with traditional permutation entropy (PE), W-PE increases amplitude information to some extent. Firstly, warship radio noise signals are decomposed into some intrinsic mode functions (IMFs) from high frequency to low frequency by CEEMDAN. Then, DCO is used to detect linear spectrum of low-frequency IMFs. Finally, we can determine the linear spectrum frequency of low-frequency IMFs using W-PE. The experimental results show that the proposed technique can accurately extract the line spectrum frequency of the simulation signals, and has a higher classification and recognition rate than the traditional techniques for real warship radio noise signals.

The performance of tissue imaging is improved by tissue harmonic imaging (THI) to expand and enhance the range and level of clinical diagnosis for many diseases. The separation based on High-pass filtering (S_HPF) is a commonly used method for extracting harmonic components from ultrasonic echo signals. However, the cut-off frequency, order and algorithm to realize a high-pass filter have a great influence on the separation accuracy of harmonic signals. In present study, a novel separation method (S_CEEMDAN) based on the complete ensemble empirical mode decomposition with adaptive noise (CEEMDAN) algorithm is proposed for adaptively separating harmonic components from ultrasonic echo signals. First, we calculate the ensemble size of CEEMDAN adaptively based on the added noise level, and draw a sum of intrinsic mode functions (IMFs) from the ultrasonic echo signals by CEEMDAN. Then, the spectrum of each IMF is computed and evaluated, and the IMFs containing both fundamental and harmonic components are further decomposed by using the CEEMDAN algorithm. This separation process is end until all of IMFs have been divided into either fundamental or harmonic categories. Finally, the corresponding fundamental and harmonic echo signals are yielded by accumulating separately these two categories. In experiments, simulated ultrasonic echo signals with a center frequency of 3.5MHz are separated by the proposed S_CEEMDAN method, and the results are compared with those processed by S_HPF. The edge of the harmonic image by S_CEEMDAN marginally better defined than S_HPF. The indices for the harmonic signals separated by S_CEEMDAN and S_HPF, respectively, are as follows: the center frequencies of 6.66 MHz and 6.65 MHz, 3 dB bandwidths of 1.04 MHz and 1.05 MHz, 6 dB bandwidths of 1.59 MHz and 1.55 MHz, signal-to-noise ratios (SNRs) of 14.00 and 13.63, and image contrasts of 7.01 and 7.06. In conclusion, due to good adaptive characteristics, and lower reconstruction errors, the proposed S_CEEMD method is superior to S_HPF in the performance of spectral accuracy and harmonic imaging. This method could be potentially alternative to the current method for the ultrasonic harmonic separation.

The rising sea level caused by global climate change might impact the human living environment. Global navigation satellite systems (GNSS)-multipath reflection (MR) technology holds significant potential for monitoring tide level changes. GNSS-MR technology typically employs low-order polynomials to extract the signal-to-noise ratio (SNR) residuals containing GNSS interference signals. It utilizes Lomb-Scargle (LSP) spectral analysis or empirical mode decomposition (EMD) to obtain the dominant frequency of the SNR residuals, which is then converted into tidal heights. However, as the satellite elevation angle increases, the GNSS interference signals decrease and the traditional method does not adapt well to the extraction of SNR residuals under such conditions. A series of improved EMD-kind algorithms, namely ensemble empirical mode decomposition (EEMD), complementary ensemble empirical mode decomposition (CEEMD), complete ensemble empirical mode decomposition with adaptive noise (CEEMDAN), and improved complete ensemble empirical mode decomposition with adaptive noise (ICEEDMAN), have been proposed to address the shortcomings of EMD algorithms such as end effect and mode aliasing. However, these improved EMD-kind algorithms have yet to be reported in sea level inversion. This study investigates the mitigation effects of EMD-kind algorithms on GNSS-MR direct signal and noise to improve the stability and accuracy of an SNR residual sequence with high satellite elevation angles. Experimental data from the HKQT station for one week and the SC02 station for one year are utilized to validate the effectiveness and accuracy of these algorithms in extracting SNR residuals. Compared to the traditional polynomial method, the experimental results demonstrate that all EMD-kind algorithms effectively address the distortion issue in traditional inversion methods under long periods, higher satellite elevation angles, and low GNSS receiver sampling rates. Among these algorithms, the results from the experiments show that ICEEMDAN consistently provides the best inversion accuracy. The results of the comparative analysis show that ICEEMDAN effectively reduces non-interference signals in SNR residuals at higher satellite elevation angles, expanding the useable range of satellite elevation angles and improving the utilization and temporal resolution of GNSS data inversion. Hence, it is an effective and appropriate approach to improving the accuracy of GNSS-MR tide level monitoring.

In this paper, we propose a novel ECG signal enhancement method based on Complete Ensemble Empirical Mode Decomposition with Adaptive Noise (CEEMDAN) and Higher Order Statistics (HOS). In our scheme, the noisy ECG signal is first decomposed adaptively into oscillatory components called intrinsic mode functions (IMFs) by using Empirical Mode Decomposition (EMD) or its variants. Therefore, the obtained modes are separated into two groups of noisy signal modes and one group of useful signal modes, by using a novel criterion derived from the HOS namely the fourth order cumulant or kurtosis. After that, a modified shrinkage scheme based on Interval Thresholding technique is adaptively applied to each selected IMF from the noise-dominant groups in order to reduce the noise and to preserve the QRS complex. The overall filtered ECG signal is then reconstructed by combining the thresholded IMFs and the retained unprocessed lower frequency relevant IMFs. Various tests and simulations are investigated to evaluate the performance of our proposed approach in combination with the EMD, Ensemble EMD (EEMD) and CEEMDAN algorithms. The simulation results carried on MIT-BIH Arrhythmia database, show that CEEMDAN method gives better performance than the two other methods, and outperforms some state-of-the-art methods in terms of Signal to Noise Ratio (SNR) and Root Mean Square Error (RMSE).

The drift signal of Fiber Optic Gyroscope (FOG) is often buried in noise. It is difficult to compensate drift directly, and three filtering methods based on Empirical Mode Decomposition (EMD) are applied. Comparison analysis with filtering methods based on EMD, Ensemble Empirical Mode Decomposition (EEMD) and the Complete Ensemble Empirical Mode Decomposition with Adaptive Noise (CEEMDAN) is done. Experimental analysis results show that CEEMDAN outperforms than other denoising methods based on EMD and EEMD. The CEEMDAN method saves computational cost, requiring only 29.7% of the sifting iterations of the EEMD. Meanwhile, the rate white noise, bias instability and quantization noise involved in original signal is decreased from 0.0029°/√h , 0.0313°/h and 0.7814° to 0.0003°/√h , 0.0034°/h and 0.0111°, respectively, after applying CEEMDAN method.

In this study, different kinds of hybrid Complete Ensemble Empirical Mode Decomposition with Adaptive Noise (CEEMDAN) algorithms with forecasting models including Random Forest (RF), Gated Recurrent Unit (GRU), and Long Short-Term Memory (LSTM) neural networks, are developed to estimate the mean daily wind speed at the height of 2 m in Ağrı city (WS st12 ), Turkey. In these hybrid models, different layer networks of single and integrated LSTM and GRU models include general single LSTM, general single GRU, simple coupled LSTM-GRU, and novel coupled LSTM with GRU through Addition layer (i.e., LSTM + GRU model) structures are applied. The most effective parameters on the WS st12 , from a list of on-site potential meteorological parameters and wind speed values in its adjacent cities of Ağrı province from Jan 2015–Dec 2019 through the Pearson correlation coefficient method, are determined. In the hybrid CEEMDAN and DNNs-based models, State activation functions (SAF), numbers of hidden neurons (NHN), dropout rates (P-rate), and network structural architect (NSA) as the meta-parameters are tuned for lessening the impact of overfitting/underfitting dilemmas and improving modeling performance. According to the comparison plots, performance evaluation measures, and total learnable parameter (TLP), the novel developed hybrid CEEMDAN-RF-(LSTM + GRU) model is confirmed as the best approach with an R 2 of 0.86 while, in the optimal scenario using the RF model, R 2 was 0.47. Graphical Abstract Based on the graphical snapshot, this study focuses on estimating daily mean wind speed at a 2-meter height in Ağrı, Turkey, using hybrid data-driven models. The research integrates the Complete Ensemble Empirical Mode Decomposition with Adaptive Noise (CEEMDAN) algorithm with advanced forecasting techniques, including Random Forest (RF), Long Short-Term Memory (LSTM), and Gated Recurrent Unit (GRU) neural networks. The modeling framework explores various configurations, such as standalone LSTM and GRU, coupled LSTM-GRU structures, and a novel LSTM + GRU model using an Addition layer to enhance predictive accuracy.

Accurate power load forecasting plays an important role in smart grid analysis. To improve the accuracy of forecasting through the three-level “decomposition–optimization–prediction” innovation, this study proposes a prediction model that integrates complete ensemble empirical mode decomposition with adaptive noise (CEEMDAN), the improved sparrow search algorithm (ISSA), a convolutional neural network (CNN), and bidirectional long short-term memory (BiLSTM). A series of simpler intrinsic mode functions (IMFs) with different frequency characteristics can be decomposed by CEEMDAN from data, then each IMF is reconstructed based on calculating the sample entropy of each IMF. The ISSA introduces three significant enhancements over the standard sparrow search algorithm (SSA), including that the initial distribution of the population is determined by the optimal point set, the position of the discoverer is updated by the golden sine strategy, and the random walk of the population is enhanced by the Lévy flight strategy. By the optimization of the ISSA to the parameters of the CNN-BiLSTM model, integrating the prediction results of the reconstructed IMFs in the sub-models can obtain the final prediction result of the data. Through the performance indexes of the designed prediction model, the application case results show that the proposed combined prediction model has a smaller prediction error and higher prediction accuracy than the eight comparison models.

Offshore platform pipeline leakage detection faces severe challenges from complex marine environments, where intense environmental noise interference and complex signal characteristics make traditional methods difficult to achieve accurate leakage valve localization. To address this technical challenge, this study proposes an offshore platform pipeline leakage valve localization method based on dynamic time warping distance-based complete ensemble empirical mode decomposition with adaptive noise (DCEEMDAN) and adaptive temporal–spatial fusion network (ATSFN). First, by introducing dynamic time warping distance similarity measurement into the complete ensemble empirical mode decomposition with adaptive noise (CEEMDAN) framework and combining probability density function feature extraction, adaptive denoising of acoustic emission signals in marine environments is achieved. Second, a temporal–spatial feature extraction architecture with a parallel multiscale convolutional neural network (CNN) and a hierarchical GRU is designed, realizing deep fusion of CNN spatial features and GRU temporal features through a cross-attention mechanism. Finally, an end-to-end intelligent monitoring system is constructed, achieving high-precision localization of 10 valve positions through dual-stage verification combining laboratory experiments and offshore platform field measurements. Experimental results show that DCEEMDAN outperforms traditional EMD series algorithms, achieving a signal-to-noise ratio (SNR) of 19.69 dB with 16.6% improvement over CEEMDAN. ATSFN achieves average localization accuracies of 94.38% and 95.75% under 4 MPa and 5 MPa conditions, respectively, representing improvements of 10.9% and 10.77% over best baseline models. Under extreme noise conditions, the model maintains localization accuracy above 82.3%, demonstrating excellent noise robustness. This research provides an effective technical solution for offshore platform pipeline leakage detection.

Electricity load demand is the fundamental building block for all utilities planning. The load demand data has nonlinear and non-stationary characteristics, which make it difficult to be predicted accurately by just computational intelligence or ensemble methods. Ensemble methods like Complete Ensemble Empirical Mode Decomposition with Adaptive Noise (CEEMDAN) is a powerful tool to forecast power load demand time series. Heterogeneous ensemble, a combination of two base models, will be distinct or more powerful in forecasting power load demand. In this paper, Complete Ensemble Empirical Mode Decomposition with Adaptive Noise (CEEMDAN) method is hybridized with three computational intelligence-based predictors: support vector regression (SVR), artificial neural network (ANN) and random forest (RF). The basis of this paper was to conduct a comparative study on the accuracy of the forecasting result from using heterogeneous ensemble method to individual computational intelligence or ensemble method for four different horizons. The performances of the heterogeneous method are compared and discussed. It shows that heterogeneous method has outperformed the individual computational intelligence and ensemble methods. Possible future works are also recommended for power load demand forecasting.

I335 the training of Support Vector Machine (SVM) classification model, some problems such as over-fitting, under-fitting, slow training speed and prediction affected by penalty and kernel function parameters are exposed. A fault classification method of rolling bearing based on Complete Ensemble Empirical Mode Decomposition with Adaptive Noise (CEEMDAN) and Grey Wolf Optimization (GWO) -SVM is proposed. Firstly, the acquire signals are adaptively decomposed into a plurality of Intrinsic Mode Function(IMF) component by CEEMDAN, and the energy entropy of each IMF component is extracted to form a set of high dimensional feature vector. Then, the processed feature vectors are introduced into the diagnosis network of GWO-SVM algorithm to build a fault classification model of motor rolling bearing. The classification results show that the CEEMDAN and GWO-SVM fault classification network of motor rolling bearing has higher accuracy and shorter diagnosis time than Particle Swarm Optimization (PSO) -SVM and Cross Validation (CV) -SVM.

Based on the complete ensemble empirical mode decomposition with adaptive noise (CEEMDAN) theory, a new adaptive hybrid algorithm for sea clutter denoising is proposed. The chaotic sea clutter signals are decomposed into several intrinsic modal functions (IMF) which start from high-frequency scales to low-frequency scales by using CEEMDAN. According to the relationship between the pretreatment threshold layer and the maximum cross correlation coefficient of the original signal and each IMF corresponding the layer, the proposed algorithm can independently select the wavelet threshold denoising to pretreat. After the pretreatment of original signals, we continue to decompose the signal by CEEMDAN. And later, according to the relationship between the first local minimum corresponding the layers of two adjacent critical IMFs identified by the cross correlation coefficients of the original signal and each IMF, the proposed algorithm adaptively selects the IMFs which need to be filtered. Finally, the IMFs after filtering are reconstructed into a new signal. Rossler, Lorenz system and the measured sea clutter data were selected as examples to study, the result shows that: under the condition of low noise (SNR ≥ 5dB) and high noise (SNR ≤ 0dB), the proposed algorithm can decrease the root mean square error by at least 57% and 72% compared with wavelet threshold denoising etc, the signal to noise ration increased by 3.18-5.64db and 5.73-7.45db. Moreover, the root mean square error after sea clutter signal denoising can be reduced by one order of magnitude, reaching 0.0006147 while the model before denoising only reach 0.0084, which shows that the proposed algorithm is effective for sea clutter signal denoising.

Aiming at power quality detection and noise pollution, in combination with complete ensemble empirical mode decomposition with adaptive noise (CEEMDAN), permutation entropy (PE) and wavelet threshold denoising based on undecimated wavelet transform (UWT), a transient power quality denoising method based on CEEMDAN and UWT is proposed. CEEMDAN decomposes the disturbance signal into a series of intrinsic mode function with single-component characteristics, UWT denoising is used to deal with the noise components screened out by PE and reconstruction to obtain the original signal after denoising. The method is implemented in LabVIEW and simulated independently, the results verify the effectiveness of the method. Finally, on the basis of PXI equipment, a detection device based on LabView is built, which provides a new idea for the development of power quality detection system.

An accurate prediction of carbon pricing is essential in carbon emission management, and also provides an important role for governments to formulate corresponding policies. However, due to the inherent complexity and dynamics of carbon price sequence, the effectiveness of different decomposition algorithms for carbon price remains to be tested. In addition, existing studies lack a systematic framework to explore the organic integration of external factors and secondary decomposition technology, and the feature processing of complex external factors still needs to be improved. In order to overcome the shortcomings of existing research, This paper presents a Variational Modal Decomposition(VMD) algorithm and a Complete Ensemble Empirical Mode Decomposition with Adaptive Second decomposition technology of Noise(CEEMDAN) decomposition algorithm, and extract the features of external factors by Extreme Gradient Boosting (XGBoost) algorithm. The HI-VMD-PE-CEEMDAN-XGBoost-Transformer model for predicting carbon price is constructed by the combined Transformer algorithm. Specifically, first, we use Hampel identifer(HI) to detect and rectify the anomalies in the original sequence. After applying Variational Mode Decomposition(VMD) decomposition algorithm, Permutation Entropy(PE) is utilized to reassemble the decomposed component. Quadratic Decomposition is performed by Complete Ensemble Empirical Mode Decomposition with Adaptive Noise(CEEMDAN) algorithm. Then, the XGBoost algorithm is employed to extract features of external factors and screen key factors as predictive input variables. Finally, Transformer, which has stronger capability of large-scale data parallel processing, is selected as the prediction model to achieve a more scientific and effective carbon price prediction. The empirical analysis results based on EU carbon market data verify the validity and superiority of the proposed model in different forecasting scenarios.

Original lidar return signals are covered by high levels of noise that seriously affect the accuracy of subsequent data processing and inversion. Therefore, it is important to separate the effective signal from the returned signal with noise interference. In this paper, an efficient denoising method based on the variational mode decomposition (VMD) algorithm optimized using the global search strategy-based whale algorithm and the total variational stationary wavelet transform (GSWOA-VMD-SWTTV) is proposed, and this method is applied to denoising of lidar return signals. First, the global search strategy-based whale optimization algorithm (GSWOA) is used to acquire the optimal parameters of the VMD algorithm adaptively, and the lidar return signal is then decomposed by global search strategy-based whale optimization algorithm (GSWOA)-VMD. The effective modal components are then determined using the cross-correlation coefficient method from the decomposed modal components, and total variation stationary wavelet denoising is performed on each effective mode. Finally, the effective modes are reconstructed to obtain a clean lidar return signal. Moreover, to provide further verification of the effectiveness of the proposed method, it is compared with the ensemble empirical mode decomposition (EEMD) method, the complete EEMD with adaptive noise (CEEMDAN) method, the singular value decomposition (SVD) method, and the wavelet threshold method under sunny, cloudy, and dusty weather conditions. The experimental results demonstrate the superior noise reduction performance of the proposed algorithm, which can filter out strong noise from the signal while retaining the complete signal details without distortion; additionally, the proposed method has the highest signal-to-noise ratio and lowest mean square error.

This paper proposes a high and low frequency filtering denoising algorithm based on Complete Ensemble Empirical Mode Decomposition with Adaptive Noise (CEEMDAN). CEEMDAN to address the issue of noise in speech signals obtained in the environment of fully mechanized mining face equipment trains. This algorithm first decomposes speech signals into multiple Intrinsic Mode Functions (IMFs) in different frequency domains through CEEMDAN, then uses Hilbert-Huang Transform (HHT) to obtain the instantaneous frequency and amplitude of IMFs, calculates the Euclidean distance between IMFs, normalizes it to obtain the average distance between IMFs, and divides the IMFs components into high and low frequency categories based on the average distance. Next, Optimally Modified Log Spectral Amplitude (OMLSA) algorithm and Kalman filtering algorithm are used for the high-frequency and low-frequency IMF components, respectively. Finally, the processed IMF components are reconstructed to obtain a denoised signal. After comparative experiments, the noise reduction algorithm proposed in this paper significantly improves the Signal to Noise Ratio (SNR), Peak Signal to Noise Ratio (PSNR), Mean Square Error (RMSE), and Mean Absolute Distance (MAE) of speech signals obtained in the environment of fully mechanized mining face equipment trains compared to other commonly used noise reduction algorithms.