Intelligent Artificial Ants based feature extraction from wavelet packet coefficients for biomedical signal classification

Image segmentation is necessary but significant element in less intensity image investigation, pattern recognition, and in robotic systems. It is one of the most complex and demanding tasks in image processing. Image segmentation is the process of separating an image into various regions such that each region is identical. This paper proposes a new medical image segmentation method that integrates multi-resolution wavelet packet decomposition with the watershed transform for MRI image. The wavelet packet transform (WPT) is applied to the input image, creating detail and approximation coefficients. If watershed technique alone is used for segmentation, then over cluster is present. To overcome this, the proposed technique which combines wavelet packet and watershed algorithm is developed. First, the wavelet packet transform is applied to produce multi-resolution images, followed by applying watershed for segmentation to the approximation sub-bands. Finally, Inverse WPT is implemented to obtain the segmented image. Due to wavelet packet decomposition, the quantity of the disturbance can be decreased and leads to a tough segmentation. This proposed work concludes that wavelet packet and watershed transform facilitate to get the elevated precision even in strident images.

An automated wood recognition system is designed to classify tropical wood species. The wood features are extracted based on two feature extractors: Basic Grey Level Aura Matrix (BGLAM) technique and statistical properties of pores distribution (SPPD) technique. Due to the nonlinearity of the tropical wood species separation boundaries, a pre classification stage is proposed which consists of Kmeans clustering and kernel discriminant analysis (KDA). Finally, Linear Discriminant Analysis (LDA) classifier and K-Nearest Neighbour (KNN) are implemented for comparison purposes. The study involves comparison of the system with and without pre classification using KNN classifier and LDA classifier. The results show that the inclusion of the pre classification stage has improved the accuracy of both the LDA and KNN classifiers by more than 12%.

This paper introduces a novel automatic hybrid classifier to detect and classify the Power Quality(PQ) problems in power systems using Wavelet Packet Transform (WPT) and Artificial Neural Networks (ANN). Various PQ events like Normal, Sag, Swell and Interruptions are obtained by modeling three phase distribution system using MATLAB simulink. For classification, the selection of suitable features from the disturbance signal is extremely important. Recent literature survey deals with various signal processing techniques like Fast Fourier Transform (FFT), Discrete Wavelet Transform (DWT) and Wavelet Packet Transform (WPT) were used for feature extraction. From the above techniques, the main issues addressed are selection of optimal feature subset and the design of ANN architecture model. To build a competent and robust classifier, it is essential to extract the utilizable feature vectors from the disturbance signal that can optimize data size as well as incorporate the main characteristics of the signal. This paper addresses these issues, and the distinctive feature vectors are obtained with reduced number of coefficients by using Energy Entropy based WPT. From these, the best discriminative feature vectors with reduced number of coefficients are obtained and are used as input to ANN, so that the burden over classification can be reduced. The classification performance is compared with FFT based ANN. The simulation results obtained have significant improvement over existing methods. Thus the proposed hybrid classifier provides the most excellent detection among PQ problems that arises in real time by improving classification accuracy in terms of both computation time and means square error.

In this paper, a Hybrid Wavelet Packet and Directional transform (HW&DT) method is proposed to compress an image effectively. The image is pixel de-correlated using Daubechies Wavelet Packet transform and set of wavelet packet coefficients are transformed using Directional transform. The Directional transform pairs DCT-II, DCT-V, DCT-VIII and DST-VII are useful in retrieving the texture information in different directions. Then the coefficients of the hybrid transform are uniformly quantized and entropy coded using Huffman coding, generating the Bit-Stream. The performance evaluation of the proposed work is done using the compression parameters like Structural Similarity Index (SSIM), Bit-Saving (%), Peak Signal to Noise ratio (PSNR) and Mean Square Error (MSE). The experimental results confirm the improvement in Bit-Saving for the image.KeywordsDiscrete cosine transform (DCT)Wavelet packet transform (WPT)Uniform quantizationHuffman coding

An automated and adaptive feature extraction method is discussed in this paper. The method is based on the Wavelet Packet Transform (WPT) and used to extract features of electroencephalogram (EEG) signals for brain computer interfaces (BCIs). The idea is to employ the best basis algorithm to select the most appropriate wavelet and the best wavelet packet basis automatically. Meanwhile, both the selected wavelet and the selected basis are adaptive to each EEG channel and each subject. The effectiveness of the method is verified by discriminating three different motor imagery tasks of six subjects.

A novel feature extraction method of spontaneous electroencephalogram (EEG) signals for brain-computer interfaces (BCIs) is explored. The method takes the wavelet packet transform (WPT) as an analysis tool and utilizes two kinds of information. Firstly, EEG signals are transformed into wavelet packet coefficients by the WPT. And then average coefficient values and average power values of certain subbands are computed, which form initial features. Finally, part of average coefficient values and part of average power values with larger Fisher indexes are combined to form the feature vector. Compared with previous feature extraction methods, the proposed approach can lead to higher classification accuracy.

The combination of Brain-Computer Interface (BCI) technology, allowing online monitoring and decoding of brain activity, with virtual and mixed reality (MR) systems may help to shape and guide implicit and explicit learning using ecological scenarios. Real-time information of ongoing brain states acquired through BCI might be exploited for controlling data presentation in virtual environments. Brain states discrimination during mixed reality experience is thus critical for adapting specific data features to contingent brain activity. In this study we recorded electroencephalographic (EEG) data while participants experienced MR scenarios implemented through the eXperience Induction Machine (XIM). The XIM is a novel framework modeling the integration of a sensing system that evaluates and measures physiological and psychological states with a number of actuators and effectors that coherently reacts to the user's actions. We then assessed continuous EEG-based discrimination of spatial navigation, reading and calculation performed in MR, using linear discriminant analysis (LDA) and support vector machine (SVM) classifiers. Dynamic single trial classification showed high accuracy of LDA and SVM classifiers in detecting multiple brain states as well as in differentiating between high and low mental workload, using a 5 s time-window shifting every 200 ms. Our results indicate overall better performance of LDA with respect to SVM and suggest applicability of our approach in a BCI-controlled MR scenario. Ultimately, successful prediction of brain states might be used to drive adaptation of data representation in order to boost information processing in MR.

This study presents a fault diagnosis system for vehicle heating, ventilation and air conditioning (HVAC) acoustic signal with various feature extractions in deep learning neural network. Traditionally, sound used for fault diagnosis or signal classification is observed the difference of energy in time or frequency domains. Unfortunately, the frequency smearing effect often arises in some critical conditions. In the present study, discrete wavelet transform (DWT) and wavelet packet transform (WPT) are proposed in fault diagnosis. Meanwhile, when using mechanical learning methods, the data are relatively large, in order to reduce the amount of data, DWT and WPT low-frequency decomposition could be used to improve the performance. Furthermore, the signal characteristics more comprehensive, this study attempts to use the feature extraction method of wavelet packet conversion to improve the signal characteristics. In the experiment process, the operation state of the blade blower in the vehicle air conditioner, four different faults were designed, test database was established through sound to classify, and identify the data using deep neural networks to achieve the purpose of blower fault diagnosis. In data analysis, the original signal is presented through wavelet packet decomposition and discrete packet conversion technology, compared with traditional time and frequency domain signals to explore the identification rate, identification speed and related issues. Experimental results show that using WPT combined with deep neural networks have good fault diagnosis and discrimination capabilities, training, and identification time is shorter than time-frequency domain signals.

The essential task of a Brain-Computer Interface (BCI) is to extract the motor imagery features from Electro-Encephalogram (EEG) signals for classifying the thought process. It is necessary to analyse these obtained signals in both the time domain and frequency domains. It is observed that the combination of multiple algorithms increases the performance of the feature extraction process. This paper identifies combinations that have not been attempted previously and improves the accuracy of the overall process, although other authors implemented different combinations of the techniques. The focus is given more on the feature extraction process and frequency bands, which are user-specific and subject-specific frequency bands. In both time and frequency domains, after analysing EEG signals with the time domain parameter, we select the frequency band and the timing while using the Fisher ratio of the time domain parameter (TDP). We used Fisher discriminant analysis (FDA)-type F-score to simultaneously select the frequency band and time segment for multi-class classification. We extracted subject-specific TDP features from the training trials to train the classifier when optimal time-frequency areas were selected for each subject. In this paper, various methods are explored for obtaining the features, which are Time Domain Parameters (TDP), Fast Fourier Transform (FFT), Principal Component Analysis (PCA), R2, Fast Correlation Based Filter (FCBF), Empirical Mode Decomposition (EMD), and Intrinsic time-scale decomposition (ITD). After the extraction process, PCA is used for dimensionality reduction. An efficient result was obtained with the combination of TDP, FFT, and PCA. We used the multi-class Fisher’s linear discriminant analysis (LDA) as the classifier, which was in line with the FDA-type F-score. It is observed that the combination of feature extraction techniques to the frequency bands that were selected by the Fisher ratio and FDA type F-score along with Fisher’s LDA classifier had higher accuracy than the results obtained other researches. A kappa coefficient accuracy of 0.64 is obtained for the proposed technique. Our method leads to better classification performance when compared to state-of-the-art methods. The novelty of the approach is based on the combination of frequency bands and two feature extraction methods.

The steady-state visual evoked potential (SSVEP) has been widely applied in brain-computer interfaces (BCIs), such as letter or icon selection and device control. Most of these BCIs used different flickering frequencies to evoke SSVEP with different frequency components that were used as control commands. In this paper, a novel method combining the time phase and EEG frequency components is presented and validated with nine healthy subjects. In this method, four different frequency components of EEG were classified out from four time phases. When the SSVEP is evoked and what is the frequency of the SSVEP is determined by the linear discriminant analysis (LDA) classifier in the same time to locate the target image. The results from offline analysis show that this method yields good performance both in classification accuracy and information transfer rate (ITR).KeywordsBrain-computer interfaces (BCIs)Electroencephalogram (EEG)Steady-state visual evoked potential (SSVEP)Time phase

An optimum algorithm in pathological voice quality assessment using wavelet-packet-based features, linear discriminant analysis and support vector machine

Our study focuses on the dynamic transient analysis of arched beam bridges over rivers, which face unique geohazards and challenges, including vibrations and dynamic loads that can affect structural integrity. The finite element software ANSYS v. 19.3 was employed to assess acceleration time histories at various bridge positions. Using MATLAB, we conducted wavelet packet decomposition to extract insights from the data, specifically isolating river-induced influences. In this article, the introduction of the wavelet packet rate index (WPERI) is presented as a novel metric for the detection of cracks in the curved bridge segments over rivers. The WPERI proves reliable in accounting for the river environment’s impact on structural integrity. Our findings highlight the sensitivity and precision of the WPERI in accurately detecting cracks and vulnerabilities in these riverine bridges. By combining WPT, finite element analysis, and signal decomposition, our research offers insights into tailored crack detection methods for riverine bridges. This study underscores the potential of WPT as a tool for identifying and characterizing cracks in curved bridge elements over rivers. The innovative WPERI provides a holistic approach to addressing structural issues, thus enhancing bridge durability amid changing environmental conditions. It contributes significantly to structural engineering and paves the way for the further exploration of river-specific crack detection techniques.

In structural health monitoring (SHM), data-driven is a model free method that mines the internal characteristics of the raw measured responses, does not need considering the structural model. This paper proposes a new data-driven damage detection method based on wavelet packet transform (WPT) combining with principal component analysis (PCA). In this method, the responses are firstly decomposed by WPT, and each layer of wavelet packet energy of each measurement is obtained. Since the wavelet packet components of small energy magnitudes are easily contaminated by noises and should be discarded. PCA is utilised to reduce and eliminate redundant information of wavelet packet energy, and a damage index named the rate of the wavelet packet energy score change (WPESCR) is proposed to locate the damage. A simple beam is employed to demonstrate the effectiveness of this method. The numerical and experimental results show that the method combined with WPT and PCA can successfully locate the damage. As a data-driven method, the new WPESCR indicator is a better candidate for continuous online SHM.

Extraction of effective features plays a key role in pattern recognition. A large number of patterns, such as speech, radar signals, earthquake signals, handwriting, etc. are of non-stationary signals or exhibit time-varying behavior. The features of these patterns are often located in both the time and frequency domains. The traditional methods fail to extract such kind of features. Fortunately, wavelet packet transform (WPT) can provide an arbitrary time-frequency decomposition for the signals, because a wavelet packet (WP) library contains many WP bases, which can handle the different components of a signal. Therefore, by selecting a suitable basis, which is called "best basis", the effective features can be extracted. In this paper, three criteria are used to select the best WPT basis, namely: (1) distance criterion, (2) divergence criterion and (3) entropy criterion. Three algorithms to implement the above criteria are also provided. Experiments are conducted and the positive results are obtained.

Beam string structure (BSS) is introduced as a new type of hybrid prestressed string structures. The composition and mechanics features of BSS are discussed. The main principles of wavelet packet transform (WPT), principal component analysis (PCA) and support vector machine (SVM) have been reviewed. WPT is applied to the structural response signals, and feature vectors are obtained by feature extraction and PCA. The feature vectors are used for training and classification as the inputs of the support vector machine. The method is used to a single one-way arched beam string structure for damage detection. The cable prestress loss and web members damage experiment for a beam string structure is carried through. Different prestressing forces are applied on the cable to simulate cable prestress loss, the prestressing forces are calculated by the frequencies which are solved by Fourier transform or wavelet transform under impulse excitation. Test results verify this method is accurate and convenient. The damage cases of web members on the beam are tested to validate the efficiency of the method presented in this study. Wavelet packet decomposition is applied to the structural response signals under ambient vibration, feature vectors are obtained by feature extraction method. The feature vectors are used for training and classification as the inputs of the support vector machine. The structural damage position and degree can be identified and classified, and the test result is highly accurate especially combined with principle component analysis.