Intelligent path planning algorithms for UAVs: Classification, complexity analysis, hybrid ablation insights, and future directions

The proliferation of unmanned aerial vehicles (UAVs) has driven the emergence of urban air mobility (UAM) as a solution to alleviate the increasing demand for UAVs applications in various domains. The concept of UAM envisions a future where UAVs play a pivotal role in short-distance transportation, delivery services, surveillance, emergency rescue, and more. However, the rapid growth of UAVs poses significant challenges arising from the need to ensure the safe coexistence of UAVs with other manned/unmanned aerial vehicles. To ensure the safe integration of UAVs into low-altitude urban airspace and support high-density on-demand mobility, this research focuses on handling the safety-centric challenges related to UAV collision risk assessment, obstacle avoidance, and conflict resolution in complex urban environments.
\nOne of the main challenges is the intrusion of UAVs into airport runways. Airports serve as critical hubs for civil aircraft takeoff and landing operations. However, the increasing presence of UAVs has raised concerns about intruding into airports, leading to flight delays and temporary runway closures. To quantify the potential interference of UAVs on civil aircraft, a collision-course based trajectory planning model is proposed to evaluate the collision risk between manned civil aircraft and intruding UAVs. In this risk assessment model, the trajectory of the intruding UAV is formulated using a collision-course concept, taking into account the limited trajectory information available about intruding UAVs. The planned trajectory of the UAVs is then used to predict its relative position concerning civil aircraft. To account for the possible disturbances of the relative distance, a stochastic position prediction model based on Brownian motion is developed. The collision risk is assessed based on this stochastic kinematic model, providing a quantitative measure of the potential collisions. The proposed model is validated through extensive simulations involving different UAV initial positions, position updates, and different sizes of collision zone tests, as well as comparative tests with the Monte-Carlo algorithm, demonstrating its robustness in assessing the collision risk of the airport restricted area. To facilitate the application, the model is finally used to develop a platform to generate runway heatmaps, accounting for airport runway risk distributions. 
\nAnother safety-centric challenge is ensuring autonomous obstacle avoidance and conflict resolution of UAVs. To enable UAV autonomous safe operations in uncontrolled urban low-altitude airspace, a comprehensive collision-free path planning framework is developed to address the avoidance of both static obstacles and dynamic threats. Firstly, to handle static obstacles, a novel algorithm of 3D voxel jump point research is introduced to generate a global reference path for UAV navigation to avoid static obstacles, particularly for a free flight at different altitudes. Additionally, to optimize the reference path for specific mission requirements, techniques such as trajectory de-diagonalization, reconstruction, and smoothness are proposed to reduce the risk of static collisions, shorten the fly range, and enable UAVs to negotiate turns more efficiently. Secondly, real-time conflict resolution actions based on the Markov decision process are developed to avoid local dynamic threats encountered along the optimized desired path. This allows the host UAV to dynamically adjust its course to a resolution trajectory while maintaining its planned speed without hovering to avoid the potential collision with the approaching intruders. By avoiding near mid-air collisions (NMAC) and preventing the UAV from hovering, the proposed method ensures the timely completion of UAV missions. Simulation results demonstrate that the developed method successfully achieves UAV autonomous global path planning and local real-time conflict resolution in complex urban low-altitude environments, thereby avoiding both static obstacles and dynamic threats. 
\nMoreover, to bridge the research gap of UAV hard conflict resolution in mitigating NMAC risks arising from local dynamic threats, a novel situational NMAC risk assessment approach is developed by integrating the conditional random field (CRF) algorithm with safety metrics and conflict resolution performance to facilitate UAV tiered aerial passage operations. To improve UAV operating environments in urban airspace, a concept of tiered aerial passages is first designed to provide a practical urban airspace planning scheme that addresses UAV heterogeneity and optimizes the utilization of urban airspace. For UAV tiered aerial passage operations, a situational NMAC risk assessment module coupled with a conflict resolution decision-making module is formulated, enabling the host UAV to evaluate and respond to real-time conflicts, ensuring avoidance of potential collisions. To assess NMAC risks, a general risk assessment model is proposed based on the CRF algorithm, considering UAV safety metrics and resolution performance. Then the overtaking, approaching head-on, and converging UAV encounters are analyzed, and situational risk potential scores are created using the Gaussian kernel function in the CRF algorithm, considering advisory, caution, and warning risk alert levels. To resolve conflict, acceptable, tolerable, and unacceptable scenarios are proposed to enhance the flexibility and personalization of the resolution decision-making. The proposed scheme is validated by simulating geometric encounter situations and comparative tests with the previous hard resolution technique. The results indicate that the proposed method outperforms UAV NMAC risk assessment and conflict resolution. Even in the most dangerous unacceptable resolution decision-making scenarios across three conflict encounters, the proposed algorithm achieves NMAC rates of 0.036, 0.070, and 0.043, which are lower than the corresponding NMAC rates associated with the hard resolution approach. Together with the acceptable and tolerable scenarios, the proposed negotiation resolution effectively tailors different risk requirements to accommodate diverse UAV missions. 
\nWith a primary focus on ensuring the safety of the UAM architecture, this research endeavors to assess UAV NMAC risks and efficiently manage potential conflicts. The proposed work are thoroughly validated to demonstrate their effectiveness in real-world scenarios. As a result, this study significantly contributes to the establishment of a robust UAM architecture, facilitating the realization of safe and reliable UAM.

Trajectory planning in airborne networks is a primary application of Unmanned Aerial Vehicle (UAV) communication. The literature contains algorithms focusing on collision avoidance, intelligent task assignment and path planning among UAVs. Cooperative schemes exist in which the UAVs communicate with each other to reach a consensus on how each vehicle will take up one trajectory at a time efficiently based on its capability. In the last decade, much research is being done to use UAVs to track contamination in the environment, detect fires and even volcanic eruptions. As the plumes are constantly varying in space and time, there have to be efficient guidance algorithms for the UAVs in order to keep track of the shape of the plume. In this paper, we survey the literature to explore the currently available trajectory planning algorithms and also the few available plume tracking algorithms. We then formulate the Plume wrapping problem and propose a cooperative trajectory planning approach for a group of UAVs, through which the UAVs communicate their position estimates and planned trajectories to update each others trajectory to efficiently wrap around a plume region so that the contamination in the region can be studied.

Unmanned aerial vehicles (UAVs), commonly known as drones, have grown in popularity and utility in a variety of applications, including surveillance, agriculture, disaster management, and communication. Path planning for unmanned aerial vehicles (UAVs) in a networked environment is a significant factor that influences the efficiency and efficacy of UAV operations. This chapter presents an overview of UAV network path planning, concentrating on essential principles, problems, and cutting-edge technologies. Because of technological breakthroughs and a wide range of applications, the use of unmanned aerial vehicles (UAVs) has grown quickly. Multiple UAVs collaborate to achieve specified objectives in UAV networks, demanding effective path-planning algorithms to enhance their performance. Path planning entails deciding on a series of actions that will allow a UAV to reach its destination while avoiding obstacles and sticking to stated limits. A UAV network is made up of many UAVs that communicate and work together to complete tasks.

In this study, the trend of unmanned aerial vehicle (UAV) technology and its applications in the mining industry were reviewed. To understand the trend of the UAV technology, the definition and classification of the UAVs, their major applications in each field, the characteristics of the sensors of the UAV were investigated. Some examples that used the UAV technology for planning, work management, facility management, safety management, and other works in the mining industry were reviewed. By introducing the UAV technology in the mining site, it is expected that the work efficiency related to mining operations would be increased. Therefore, the application of the UAV technology in the mining industry would be expanded further.

Introduction: Unmanned aerial vehicle (UAV) swarms are increasingly employed in civilian and military applications. Efficient path planning is critical for navigating dynamic environments, yet challenges such as collision avoidance, energy optimization, and multiagent coordination hinder deployment. Methods: A systematic literature review (SLR) was conducted to classify UAV swarm pathplanning algorithms into four categories: sampling-based, graph-based, biologically inspired, and mathematical model-based approaches. The review adhered to established SLR guidelines, employing systematic database searches and predefined inclusion and exclusion criteria. Each algorithm was evaluated in terms of computational efficiency, adaptability, and application suitability. Results: Biologically inspired algorithms demonstrated high adaptability and flexibility, whereas graph-based approaches were effective in structured environments. Sampling-based methods proved scalable in high-dimensional spaces, and mathematical models emphasized optimization. Persistent challenges include real-time adaptability, energy efficiency, and operations in interactive environments. Discussion: The comparative analysis highlights the trade-offs inherent in each approach and underscores the unresolved challenges that limit practical implementation. Addressing these gaps is essential to advance the reliability and applicability of UAV swarms in real-world scenarios. Conclusion: This review systematically evaluates UAV swarm path-planning algorithms, identifying their respective advantages, limitations, and application contexts. The findings provide a reference framework to inform future research directions aimed at enhancing UAV swarm autonomy and operational efficiency.

Abstract. This paper looks into the latest achievement in the low-cost Unmanned Aerial Vehicle (UAV) technology in their capacity to map the semi-development areas. The objectives of this study are to establish a new methodology or a new algorithm in image registration during interior orientation process and to determine the accuracy of the photogrammetric products by using UAV images. Recently, UAV technology has been used in several applications such as mapping, agriculture and surveillance. The aim of this study is to scrutinize the usage of UAV to map the semi-development areas. The performance of the low cost UAV mapping study was established on a study area with two image processing methods so that the results could be comparable. A non-metric camera was attached at the bottom of UAV and it was used to capture images at both sites after it went through several calibration steps. Calibration processes were carried out to determine focal length, principal distance, radial lens distortion, tangential lens distortion and affinity. A new method in image registration for a non-metric camera is discussed in this paper as a part of new methodology of this study. This method used the UAV Global Positioning System (GPS) onboard to register the UAV image for interior orientation process. Check points were established randomly at both sites using rapid static Global Positioning System. Ground control points are used for exterior orientation process, and check point is used for accuracy assessment of photogrammetric product. All acquired images were processed in a photogrammetric software. Two methods of image registration were applied in this study, namely, GPS onboard registration and ground control point registration. Both registrations were processed by using photogrammetric software and the result is discussed. Two results were produced in this study, which are the digital orthophoto and the digital terrain model. These results were analyzed by using the root mean square errors and mean absolute error to determine the level of accuracy and the precision of photogrammetric products. It can be concluded that the new method of image registration by using the GPS onboard of the UAV produces medium accuracy result compared to the method that uses the ground control point. This new method can be used for the medium accuracy requirements. Unmanned Aerial Vehicle can be used for several applications, which requires a medium accuracy.

In recent years, as the cost of Unmanned Aerial Vehicle (UAV) technology has steadily decreased and advancements in data processing speed and image recognition have accelerated, UAVs have become increasingly favored in civil engineering surveying and mapping. The purpose of this paper is to study the development of UAV technology in the field of civil engineering surveying and mapping and its current application methods. By analysing the above contents, the problems still existing in the current practical use of UAV technology are studied. Through a review of relevant literature, newly developed technologies will be integrated with current UAV capabilities to propose recommendations for future improvements. This article employs literature analysis and case study methodologies to investigate the utilization of UAV technology. It delineates the current state of development and the challenges that UAV technology faces in the surveying field by examining extant academic research materials and legal regulations. It also provides a concise overview of the distinctive benefits of UAV technology. Simultaneously, the deficiencies of UAV technology in field environments are investigated, particularly focusing on data collection and accuracy in engineering surveying projects. UAV technology has obvious advantages compared with traditional methods in the field of civil engineering surveying and mapping. It can complete surveying and mapping tasks efficiently and quickly in many application scenarios. The high flexibility of UAVs and the high-precision scanning of their sensors are enough to meet the needs of current engineering surveying and mapping. The wide application of UAV technology still faces problems such as imperfect laws and regulations, insufficient surveying and mapping scope, and large surveying and mapping data. Addressing these issues requires the development of new laws and the creation of algorithms to enhance data processing capabilities.

This study explores the application of Particle Swarm Optimization (PSO) in Unmanned Aerial Vehicle (UAV) path planning within a simulated three-dimensional environment. UAVs, increasingly prevalent across various sectors, demand efficient navigation solutions that account for dynamic and unpredictable elements. Traditional pathfinding algorithms often fall short in complex scenarios, hence the shift towards PSO, a bio-inspired algorithm recognized for its adaptability and robustness. We developed a Python-based framework to simulate the UAV path planning scenario. The PSO algorithm was tasked to navigate a UAV from a starting point to a predetermined destination while avoiding spherical obstacles. The environment was set within a 3D grid with a series of waypoints, marking the UAV's trajectory, generated by the PSO to ensure obstacle avoidance and path optimization. The PSO parameters were meticulously tuned to balance the exploration and exploitation of the search space, with an emphasis on computational efficiency. A cost function penalizing proximity to obstacles guided the PSO in real-time decision-making, resulting in a collision-free and optimized path. The UAV's trajectory was visualized in both 2D and 3D perspectives, with the analysis focusing on the path's smoothness, length, and adherence to spatial constraints. The results affirm the PSO's effectiveness in UAV path planning, successfully avoiding obstacles and minimizing path length. The findings highlight PSO's potential for practical UAV applications, emphasizing the importance of parameter optimization. This research contributes to the advancement of autonomous UAV navigation, indicating PSO as a viable solution for real-world path planning challenges.

U NMANNED Aerial Vehicles (UAVs) hold good promise for autonomously carrying out complex civilian and military operations. However, many of these missions require them to fly at low altitudes, making them vulnerable to collision with both stationary as well as moving obstacles. Hence, it is vital that UAVs are equipped with autonomous capability to sense and avoid collisions, especially for the pop-up threats. When such a threat is sensed and a collision is predictedwithin a short time ahead, theUAV should be able to react and maneuver away quickly so that the collision is avoided. An algorithmwhich can assure such amaneuver is called a “reactive collision avoidance algorithm.” Since the available reaction time in such a scenario is usually is small and UAVs are usually limited by computational resources, such an algorithm should also be computationally very efficient (it should preferably be noniterative). It is also required that whilemaneuvering away, it should notmaneuver toomuch away from the obstacle either. This is both to avoid collision from other nearby obstacles and not to compromise on the overall mission objective. There are various attempts in the literature to develop algorithms for collision avoidance purpose, many of which are inspired from global path planning algorithms. The artificial potential field method is such an approach where the motion of the vehicle is guided under the influence of a potential field. The potential field (which is essentially a cost function) is designed in such a way that obstacles have repulsive fields while the destination has an attractive field. The safe path of the UAV is then found by optimizing the carefully selected cost function. To tune this basic philosophy for reactive collision avoidance, a model predictive control-based algorithm has been proposed in the literature. This algorithm essentially assures path following under safe conditions (i.e. if no collision is predicted in the near future) and invokes the potential field function when new collisions are sensed. However, in potential field based techniques the associated optimization process is typically done in an iterative manner. Because of this they are usually computationally intensive and hence are not suitable for reactive collision avoidance of airborne UAVs in general. A promising algorithm in collision avoidance and global path planning is the philosophy of rapidly-exploring random tree (RRT) [1], which has also been used for reactive collision avoidance. However, there are many concerns about the RRT approach, which can largely be attributed to the random nature of the algorithm. For example, the path predicted by RRT is usually a sting of connected straight lines that does not reflect the path followed by a vehicle with nonholonomic constraints. More important, it is a probabilistic approach and hence there is no guarantee of finding a feasible path within a limited finite time. Other graph search algorithms such as best-first search are also implemented for reactive collision avoidance [2]. However, this is not systematic approach and could result in the algorithm searching far too many nodes under some conditions. Moreover, precomputing motion primitives and saving them in a lookup table is infeasible for UAVs, which are usually resource-limited. An interesting perspective to collision avoidance problem is the minimum effort guidance [3], where an optimal control-based approach has been proposed after applying the collision cone philosophy to detect collisions. This method is computationally nonintensive as a closed form solution has been proposed. Even though this is an interesting idea, by minimizing the lateral acceleration, perhaps it imposes unwanted extra constraint on the problem formulation as reactive collision avoidance problems do not necessarily have to be carried out with minimum lateral acceleration. More important, one can observe that this formulation only assures position guarantee and no constraint is imposed on the velocity vector. Hence, even though it guides the vehicle to a carefully selected target point on the safety boundary (we call it the “aiming point”), it causes the vehicle to maneuver until this point. This can be risky as the vehicle may enter the safety ball before reaching the aiming point. Even though the collision cone based aiming point philosophy is a very good idea, the authors of this Note strongly believe that instead of only position guarantee, rather the velocity vector should be aligned towards the aiming point as soon as a collision is detected (which will automatically lead to position guarantee as well). Towards this objective, two new nonlinear guidance laws are proposed in this Note, which are named as nonlinear geometric guidance (NGG) and differential geometric guidance (DGG). These guidance laws are inspired by the philosophy of “aiming point guidance” (APG) [4], which has been proposed in missile guidance literature. It turns out that the APG is a simplified case of the NGG where the associated since function is replaced by its linear approximation (hence, for a systematic discussion, it is renamed as linear geometric guidance (LGG) in this Note). Both of the guidance algorithms proposed in this Note quickly align the velocity vector of the UAValong the aiming point within a part of the available time-togo, which ensures quick reaction and hence safety of the vehicle. The main feature of this philosophy is that they effect high maneuvering at the beginning, causing the velocity vector of the UAV to align with the aiming point direction quickly and then settling along it. Therefore there is no need to maneuver all the way until the aiming point is reached and hence the chance of the UAV entering into the safety ball is minimized. Using the point of closest approach (PCA) [5], the proposed NGG andDGGalgorithms have also been extended for collision avoidance with moving obstacles in both cooperative as well as ignorant scenarios. Mathematical correlations between the guidance laws have also been established, which show that the NGG and DGG are exactly correlated to each other with appropriate gain selections, while the LGG is an approximation of DGG. A “sphere-tracking algorithm” is also proposed in this Note where the UAV is guided to track the surface of the safety spherewhenever a brief violation of the safety boundary occurs after reaching the aiming point because of the location of the next aiming point (which may include the target in Presented as Paper 2010-8315 at the AIAA Guidance, Navigation and Control, Toronto, 2–5August 2010; received 26May 2010; revision received 4 October 2010; accepted for publication 6 October 2010. Copyright © 2010 by Radhakant Padhi. Published by the American Institute of Aeronautics and Astronautics, Inc., with permission. Copies of this paper may be made for personal or internal use, on condition that the copier pay the $10.00 per-copy fee to the Copyright Clearance Center, Inc., 222 Rosewood Drive, Danvers, MA 01923; include the code 0731-5090/11 and $10.00 in correspondence with the CCC. ∗Former Project Assistant, Department of Aerospace Engineering; anushamujumdar87@gmail.com. Associate Professor, Department of Aerospace Engineering; padhi@ aero.iisc.ernet.in. JOURNAL OF GUIDANCE, CONTROL, AND DYNAMICS Vol. 34, No. 1, January–February 2011

Information acquisition and rescue operation management can be facilitated by the use of unmanned aerial vehicles (UAVs) equipped with cameras and sensors that are capable of aerial photography and acquire important information from disaster-stricken areas. UAV technology is a relatively low-cost, flexible, and safe solution in missions that are difficult for humans or other systems. UAV usage in pre-and post-disaster assessment, response, and management is an active area of research. There are two important technical aspects of UAV applications in disaster situations. The first is the limited communication range. Information acquired and photography produced by UAVs are only transmitted in real-time to the ground control station (GCS) within its communication range. Remote real-time monitoring of distant areas beyond the UAV's communication range is not possible using a single UAV. It is only possible through communication among several UAVs. The second is the relatively short flight time due to limited battery capacity. UAV replacement is required in order to carry out a persistent monitoring mission. In this paper, we propose a new remote real-time monitoring system of a distant disaster area using multiple UAVs. Wireless communications between multiple UAVs constitutes a UAV network in our proposed system. Moreover, the proposed system replaces the UAVs in-flight with standby UAVs according to the remaining energy levels. We compare the performance of the proposed system with an existing UAV system. Our simulation results show that the proposed system can achieve efficient remote real-time monitoring.

In this paper, we investigate jamming-resilient unmanned aerial vehicle (UAV) path planning strategies for data collection in Internet of Things (IoT) networks, in which the typical UAV can learn the optimal trajectory to elude such jamming attacks. Specifically, the typical UAV is required to collect data from multiple distributed IoT nodes under collision avoidance, mission completion deadline, and kinematic constraints in the presence of jamming attacks. We first design an intelligent UAV jammer, which utilizes reinforcement learning to choose actions based on its observation. Then, an intelligent UAV anti-jamming strategy is constructed to deal with such attacks, and the optimal trajectory of the typical UAV is obtained via dueling double deep Q-network (D3QN). Simulation results show that the intelligent jamming attack has great influence on the UAV's performance, and the proposed defense strategy can recover the performance close to that in no-jammer scenarios.

As a quite interesting subject, there are an increasing number of researches about UAV (Unmanned Aerial Vehicle) in the literature.These robots are quite suitable to dull, dirty and dangerous missions (e.g., over flights at low altitude, especially at night, and longrunning operations, which exposes the crew to extreme fatigue).Thus, an important application of these vehicles is the search operations involving multiple UAVs.However, despite the huge potential use of the UAVs, cooperative search operations with this kind of flying robots are not yet occurring.This research topic is a multidisciplinary area of study in its beginning.Several issues can be studied related to cooperative UAV for search operations, such as centralized versus decentralized control, path planning for cooperative flies, agent reasoning for UAV tactical planning, safety assessments, reliability in automatic target reconnaissance by cameras, agent coordination mechanisms applied for UAV cooperation and the application itself (e.g., patrolling, remote sensing, search and rescue operations supporting, etc.).This paper proposes a model that combines path planning algorithms, search patterns and multiagent coordination techniques to obtain a cooperative UAV model.Different path planning algorithms were studied aiming to get the most suitable to these kinds of operations, and the conclusions are presented.In addition, official documents of Search and Rescue operations are also studied in order to know the best practices already established for this kind of operations, and, finally, an overview of the coordination multi-agent theory is presented and evaluated to achieve the UAV coordination.The great goal for cooperative UAV is to achieve such performance that the performance of the group overcomes the sum of the individual performances isolatedly.Comparing two cooperative UAVs with two non-cooperative UAVs, simulations of previous work showed an average increase in efficiency by about 100%.Besides, another aspect was simulated and evaluated: the impact of the density of the initial sweep.The computational simulations show a high potential of reducing even more the time of search.Furthermore, it is worth noting that the usefulness of cooperative UAVs is not only the increase in efficiency, but also the reduction of costs and risks for the crew.

Unmanned Aerial Vehicles (UAVs), particularly quadrotor UAVs, are widely recognized for their cost-effectiveness, operational flexibility, and vertical takeoff and landing capabilities, making them ideal for specific airspace operations and emergency response scenarios. Efficient path planning is critical for UAV mission execution, requiring optimal flight paths that ensure safe obstacle avoidance while addressing challenges such as dynamic environments, energy optimization, and multi-parameter management. Despite advancements in path planning techniques, including the artificial potential field (APF) method and reinforcement learning (RL), issues like local optima and parameter tuning complexity persist, limiting adaptability in dynamic environments. This study proposes a hybrid approach integrating Markov Decision Process (MDP) theory with an improved artificial potential field (IAPF) method to enhance quadrotor UAV path planning in three-dimensional environments. By generating global waypoints based on known obstacle, the method minimizes flight path deviations and improves navigation performance. The results demonstrate significant advancements in trajectory accuracy and adaptability, offering a robust solution for UAV path optimization in complex scenarios.

The unmanned aerial vehicle (UAV) is one of the mobile robots which has grown rapidly in popularity in recent years. UAVs have been used in various activities to convey important information on the aerial transportation system. However, an application to get real-time information from UAVs remains a challenging task. Therefore, this paper presents an integration system to optimise the use of UAVs for aerial surveillance. The proposed system explains the design and implementation a UAV system which consists of on-board and ground stations. The on-board system has the function to send UAV flight data, send aerial images and carry items using a gripper which equipped with sensors to detect obstacles. The ground station has the function to control UAV flights, receive and display UAV flight data and aerial images, display the attitude of the UAV and send commands to move the camera and gripper. Flight controllers in this system use non-linear complementary filter on SO(3) to estimate the attitude of the UAV and proportional-integral (PI) controller to stabilise the UAV flight. By providing the real-time acquisition data of the UAV, we believe this system can be a useful tool for many implementations using UAV.

Path planning is considered for the aerial refueling of an unmanned aerial vehicle (UAV). The objective of the path planning considered in this study is to make a tanker and a UAV rendezvous at a preplanned point. To avoid abrupt maneuver of the UAV while minimizing energy consumption, rendezvous path planning as well as a guidance law is proposed. The proposed rendezvous path planning is constructed in two phases: approach phase which is the phase from the initial position to the transition, and rendezvous phase which is the phase from the transition to the preplanned point for rendezvous. The UAV performs speed control using the shape of the path and acceleration commands, and finally the UAV maintains the same velocity as the tanker to accomplish a refueling mission. Aerial refueling mission is generally performed between one tanker and multiple aircraft, and, therefore, a preplanned point is assigned to each UAV for the rendezvous. Numerical simulation is performed to demonstrate the performance of the proposed method.