Interactions between entangled photons emitted by a diode

Entangled photon pairs are a crucial resource in quantum information processing. However, common sources of entangled photon pairs, such as generation by spontaneous parametric down-conversion, impose a Poisson distribution on the pairs, limiting their applicability to quantum information processing. Therefore, generating entangled photon pairs exhibiting a sub-Poisson distribution (i.e., entangled photon bundle) would be crucial/an important advancement in the current research context. Recently, it has been proposed that antibunched photon pairs can be generated using pulsed excitation of quantum dots based on photon blockade. In this work we propose a scheme to generate entangled photon pairs with strong antibunching properties via continuous driving. Under two-photon resonant continuous pumping, a quantum dot is first excited to a biexciton state and then emits a pair of entangled photons into a two-mode cavity. Owing to the strong coupling between the quantum dot and optical modes of the cavity, at most one pair of left-/right-polarized photons exists at a time in the cavity. Specifically, the antibunching effect, average photon number, and entanglement of the left- or right-polarized photons can be resonantly enhanced when the coupling strengths between the exciton (biexciton) transition and cavity modes are equal. Moreover, our results show that the binding energy of the biexciton substantially affects the antibunching effect, average photon number, and entanglement of the left-/right-polarized photons. With suitable parameters, we can realize photon pairs with strong antibunching, a large average photon number, and deep entanglement. Hence, the studied quantum dot-cavity system is a promising source of antibunched entangled photon pairs.

After briefly reviewing a history of quantum dot lasers, the current state of the arts and current issues are discussed including low threshold quantum dot lasers with photonic crystal nano-cavity. In addition, recent advances in quantum information devices based on the quantum dots such as single photon emitters and entanglement photon pair generators, such as 200 k operation of single photon emitters using GaN quantum dots and single photon emitters at 1.5 mum will be presented. In the lecture, physics of correlated electrons in the quantum dots will be also discussed for quantum information devices.

Global, secure quantum channels will require efficient distribution of entangled photons. Long distance, low-loss interconnects can only be realized using photons as quantum information carriers. However, a quantum light source combining both high qubit fidelity and on-demand bright emission has proven elusive. Here, we show a bright photonic nanostructure generating polarization-entangled photon pairs that strongly violates Bell’s inequality. A highly symmetric InAsP quantum dot generating entangled photons is encapsulated in a tapered nanowire waveguide to ensure directional emission and efficient light extraction. We collect ~200 kHz entangled photon pairs at the first lens under 80 MHz pulsed excitation, which is a 20 times enhancement as compared to a bare quantum dot without a photonic nanostructure. The performed Bell test using the Clauser-Horne-Shimony-Holt inequality reveals a clear violation (SCHSH > 2) by up to 9.3 standard deviations. By using a novel quasi-resonant excitation scheme at the wurtzite InP nanowire resonance to reduce multi-photon emission, the entanglement fidelity (F = 0.817 ± 0.002) is further enhanced without temporal post-selection, allowing for the violation of Bell’s inequality in the rectilinear-circular basis by 25 standard deviations. Our results on nanowire-based quantum light sources highlight their potential application in secure data communication utilizing measurement-device-independent quantum key distribution and quantum repeater protocols.

A practical way to link separate nodes in quantum networks is to send photons over the standard telecom fibre network. This requires sub-Poissonian photon sources in the wavelength band around 1550 nm, with photon coherence times sufficient to enable the many interference-based technologies at the heart of quantum networks. Here, we show that droplet epitaxy InAs/InP quantum dots emitting in the telecom C-band can provide photons with coherence times exceeding 1 ns under low power non-resonant excitation, and demonstrate that these coherence times enable near-optimal interference with a C-band polarisation-encoded laser qubit, with visibilities only limited by the quantum dot multiphoton emission. Using entangled photons, we further show teleportation of such qubits in six different bases with average postselected fidelity reaching 88.3 ± 4.0%. Beyond direct applications in long-distance quantum communication, the high degree of coherence in these quantum dots is promising for future spin-based telecom quantum network applications.

Quantum light from optically dressed quantum dot states in microcavities

An interdisciplinary quantum communications and sensing research effort has been underway at the NASA Glenn Research Center since the summer of 2000. Researchers in the Communications Technology, Instrumentation and Controls, and Propulsion and Turbomachinery Divisions have been working together to study and develop techniques that use the principle of quantum entanglement (QE). This work is supported principally by the Nanotechnology Base R&T program at Glenn. As applied to communications and sensing, QE is an emerging technology that holds promise as a new and innovative way to communicate faster and farther, and to sense, measure, and image environmental properties in ways that are not possible with existing technology. Quantum entangled photons are inseparable as described by a wave function formalism. For two entangled photons, the term inseparable means that one cannot describe one photon without completely describing the other. This inseparability gives rise to what appears as spooky, or nonintuitive, behavior because of the quantum nature of the process. For example, two entangled photons of lower energy can be created simultaneously from a single photon of higher energy in a process called spontaneous parametric down-conversion. Our research is focused on the use of polarization-entangled photons generated by passing a high-energy (blue) photon through a nonlinear beta barium borate crystal to generate two red photons that have orthogonal, but entangled, polarization states. Although the actual polarization state of any one photon is not known until it is measured, the act of measuring the polarization of one photon completely determines the polarization state of its twin because of entanglement. This unique relationship between the photons provides extra information about the system. For example, entanglement makes it easy to distinguish entangled photons from other photons impinging on a detector. For many other applications, ranging from quantum computation and information to quantum sensing, the entanglement property is critical.

We have distributed entangled photons directly through the atmosphere to a receiver station 7.8 km away over the city of Vienna, Austria at night. Detection of one photon from our entangled pairs constitutes a triggered single photon source from the sender. With no direct time-stable connection, the two stations found coincidence counts in the detection events by calculating the cross-correlation of locally-recorded time stamps shared over a public internet channel. For this experiment, our quantum channel was maintained for a total of 40 minutes during which time a coincidence lock found approximately 60000 coincident detection events. The polarization correlations in those events yielded a Bell parameter, S=2.27+/-0.019, which violates the CHSH-Bell inequality by 14 standard deviations. This result is promising for entanglement-based freespace quantum communication in high-density urban areas. It is also encouraging for optical quantum communication between ground stations and satellites since the length of our free-space link exceeds the atmospheric equivalent.

Entangled photon sources play a pivotal role in most of the optical systems that utilize quantum effects. Those include quantum key distribution, quantum computing, metrology, sensing and imaging. Photon pair generation using spontaneous parametric down conversion (SPDC) is one of the most popular routes for producing entangled photons. While SPDC has become more popular, the creation of entangled photon pairs in a degree of freedom, such as polarization, is more challenging. The difficulty is related in no small part to the birefringence of the structure where the generation takes place. Birefringence results in distinguishing information that hinders the production of entanglement in the platforms where SPDC has been most popular including ferroelectric crystals.Despite this limitation, entangled sources have been realized in bulk crystals via well designed interference techniques, which often include additional compensating optics. As the boundaries of optical quantum information science continue to be extended, multi-photon entanglement is now required. Solutions based on SPDC have been attempted, and while some outstanding results have been achieved, the interferometers and compensation procedures become increasingly complex as the size of the entangled state grows. Such scalability and stability issues are directly addressed by integrated entangled photon sources, and while still in their infancy, they promise to help a great deal towards the practical utilization and the production of entanglement on a larger scale.Semiconductors are an ideal platform to fabricate such integrated entangled photon sources. Recently, it was demonstrated that the gallium-arsenide (GaAs) based Bragg refection waveguide (BRW), could efficiently produce photon pairs via SPDC. This platfrom was shown to have a distinct advantage over other semiconductor sources, due largely to its monolithic architecture and its layered epitaxy, which underpins many photonic devices. In this work we demonstrate yet another advantage: the intrinsic capability of the BRW to directly produce polarization entangled photon pairs, without any additional interferometry, spectral filtering, compensation or post-selection. Not only do we show that the BRW can produce entangled photons, but we wish to emphasize that the traditional compensation and interferometric methods used to create entanglement, which presumably would have occurred on chip, may no longer be necessary. Our experimental results confirm that the BRW has the potential to be one of the very first self-contained integrated room temperature resources of entanglement.In this talk various approaches for utilizing SPDC processes in various integration platforms will be discussed. The root cause of entanglement generation is the lack of birefringence in these material systems, which otherwise makes exact phase matching impossible in bulk crystals. Because of this, cross-polarized photons propagate at almost identical group velocities, making off-chip path compensation unnecessary.

Epitaxially grown self-assembled semiconductor quantum dots (QDs) with atom-like optical properties have emerged as the best choice for single-photon sources required for the development of quantum technology and quantum networks. Nondestructive selection of a single QD having desired structural, compositional, and optical characteristics is essential to obtain noise-free, fully indistinguishable single or entangled photons from single-photon emitters. Here, we show that the structural orientations and local compositional inhomogeneities within a single QD and the surrounding wet layer can be probed in a screening fashion by scanning X-ray diffraction microscopy and X-ray fluorescence with a few tens of nanometers-sized synchrotron radiation beam. The presented measurement protocol can be used to cull the best single QD from the enormous number of self-assembled dots grown simultaneously. The obtained results show that the elemental composition and resultant strain profiles of a QD are sensitive to in-plane crystallographic directions. We also observe that lattice expansion after a certain composition-limit introduces shear strain within a QD, enabling the possibility of controlled chiral-QD formation. Nanoscale chirality and compositional anisotropy, contradictory to common assumptions, need to be incorporated into existing theoretical models to predict the optical properties of single-photon sources and to further tune the epitaxial growth process of self-assembled quantum structures.

Single-photon emitters are crucial for the applications in quantum communication, random number generation and quantum information processing. Self-assembled InAs/GaAs quantum dots (QDs) have demonstrated to have singlephoton emission with high extraction efficiency, single-photon purity, and photon indistinguishability. Thus they are considered as the promising deterministic single-photon emitters. To extend the emission wavelength of InAs/GaAs QDs to telecom band, several methods have been developed, such as the strain engineered metamorphic quantum dots, the use of strain reducing layers and the strain-coupled bilayer of QDs. In fact, it is reported on single-photon emissions based on InAs/InP QDs with an emission wavelength of 1.55μm, but it is difficult to combine such QDs with a high-quality distributed Bragg reflector (DBR) cavity because the refractive index difference between InP and InGaAsP is too small to obtain a DBR cavity with high quality factor. Here we investigate 1.3μm single-photon emissions based on selfassembled strain-coupled bilayer of InAs QDs embedded in micropillar cavities. The studied InAs/GaAs self-assembled QDs are grown by molecular beam epitaxy on a semi-insulating (100) GaAs substrate through strain-coupled bilayer of InAs QDs, where the active QDs are formed on the seed QDs capped with an InGaAs layer, and two-layer QDs are vertically coupled with each other. In such a structure the emission wavelength of QDs can be extended to 1.3μm. The QDs with a low density of about 6×10<sup>8</sup> cm<sup>-2</sup> are embedded inside a planar 1-<sup>λ</sup> GaAs microcavity sandwiched between 20 and 8 pairs of Al<sup>0.9</sup>Ga<sup>0.1</sup>As/GaAs as the bottom and top mirror of a DBR planar cavity, respectively. Then the QD samples are etched into 3μm diameter micropillar by photolithography and dry etching. The measured quality factor of studied pillar cavity has a typical value of approximately 300. Photoluminescence (PL) spectra of QDs at a temperature of 5 K are examined by using a micro-photoluminescence setup equipped with a 300 mm monochromator and an InGaAs linear photodiode array detector. A diode laser with a continuous wave or a pulsed excitation repetition rate of 80 MHz and an excitation wavelength of 640 nm is used to excite QDs through an near-infrared objective (<sup>NA</sup> 0.5), and the PL emission is collected by the same objective. The time-resolved PL of the QDs is obtained by a time-correlated single photon counting. The second-order correlation function is checked by a Hanbury-Brown and Twiss setup through using ID 230 infrared single-photon detectors.<br/>In summary, we find that the 1.3μm QD exciton lifetime at 5 K is measured to be approximately 1 ns, which has the same value as the 920 nm QD exciton lifetime. The second-order correlation function is measured to be 0.015, showing a good characteristic of 1.3μm single photon emission. To measure the coherence time, i.e., to perform highresolution linewidth measurements, of the QDs emitted at the wavelength of 920 and 1300 nm, we insert a Michelson interferometer in front of the spectrometer. The obtained coherence time for 1.3μm QDs is 22 ps, corresponding to a linewidth of approximately 30μeV. Whereas, the coherence time is 216 ps for 920 nm QDs, corresponding to a linewidth of approximately 3μeV. Furthermore, both emission spectral lineshapes are different. The former is of Gaussian-like type, while the latter is of Lorentzian type.

The gate-defined quantum dot is regarded as one of the basic structures required for scalable semiconductor quantum processors. Here, we demonstrate a structure that contains three quantum dots scaled in series. The electron number of each dot and the tunnel coupling between them can be tuned conveniently using splitting gates. We tune the quantum dot array asymmetrically such that the tunnel coupling between the right dot and the central dot is much larger than that between the left dot and the central dot. When driven by microwaves, the sidebands of the photon-assisted tunneling process appear not only in the left-to-central dot transition region but also in the left-to-right dot transition region. These sidebands are both attributed to the left-to-central transition for asymmetric coupling. Our result shows that there is a region of a triple quantum dot structure that remains indistinct when studied with a normal two-dimensional charge stability diagram; this will be helpful in future studies of the scalability of quantum dot systems.

Introduction The advanced growth of semiconductor quantum dots (QDs) with high optical quality is one key to realizing novel devices in various research disciplines related to modern semiconductor technologies. Despite recent progress in the top-down lithographic fabrication of single semiconductor QD-like emitters [43], bottom-up fabrication methods are commonly applied for the realization of high quality light emitting QDs [7]. The exploitation of high-density QD arrays as an active material in laser diodes [17] and vertical cavity surface emitting lasers (VCSEL) resulted in a new class of devices featuring lower lasing thresholds and improved device performance (such as temperature stability) in comparison to devices with higher dimensional gain [2, 3]. Spintronics and quantum information processing are intensively studied fields in order to provide complementary or entirely novel routes to a future information technology [12, 5]. Single self-assembled quantum dots (QDs) grown in low-density arrays are promising candidates for realizing functional building blocks in these research fields as they allow to confine single charge carriers or spin carriers while providing a solid-state platform capable of electrical injection or manipulation. Extensive research has resulted in the realization of various devices relying on few or single QDs, for instance quantum light emitters such as single photon sources [23, 36], sources of pairs of entangled photons [1, 45], and fewto single-QD lasers [38]. Moreover, many milestone experiments have been performed with In(Ga)As QDs grown on GaAs, for instance the observation of the Purcell effect [10] or reaching the strong QD exciton–photon coupling regime [26], demonstration of the indistinguishability of photons emitted by a QD [29], or complete control of a single spin by ultrafast optical pulses [25].

Quantum radar based on the mechanism of quantum physics and the quantum information is a new sensing technology that was developed to solve technology bottleneck of classic radar. Especially, The Quantum illumination based on entanglement light beam could overcome noise and information loss. In this paper, the principle of quantum radar is introduced in detail, and the quantum illumination radar scheme using entangled photons is discussed. Then, target detection method based on entangled photons is given, and simulation results are showed. Finally, it is demonstrated by experiments that the performance of entangled photon detection system is superior to non-entangled photon detection system in a noisy and lossy environment, and the targets appear to look bigger when looked with low photon number.

Entangled photon pairs are critically important in fundamental quantum mechanics research as well as in many areas within the field of quantum information, such as quantum communication, quantum computation, and quantum cryptography. Previous demonstrations of entangled photons based on atomic ensembles were achieved by using a reference laser to stabilize the phase of two spontaneous four-wave mixing paths. Here, we demonstrate a convenient and efficient scheme to generate polarization-entangled photons with a narrow bandwidth of $57.2\ifmmode\pm\else\textpm\fi{}1.6$ MHz and a high-fidelity of $96.3\ifmmode\pm\else\textpm\fi{}0.8%$ by using a phase self-stabilized multiplexing system formed by two beam displacers and two half-wave plates where the relative phase between the different signal paths can be eliminated completely. It is possible to stabilize an entangled photon pair for a long time with this system and produce all four Bell states, making this a vital step forward in the field of quantum information.

Reliable information transmission between spatially separated nodes is fundamental to a network architecture for scalable quantum technology. Spin qubit in semiconductor quantum dots is a promising candidate for quantum information processing. However, there remains a challenge to design a practical path from the existing experiments to scalable quantum processor. Here we propose a module consisting of spin singlet-triplet qubits and single microwave photons. We show a high degree of control over interactions between the spin qubit and the quantum light field can be achieved. Furthermore, we propose preparation of a shaped single photons with an efficiency of 98%, and deterministic quantum state transfer and entanglement generation between remote nodes with a high fidelity of 90%. This spin-photon module has met the threshold of particular designed error-correction protocols, thus provides a feasible approach towards scalable quantum network architecture.