Interactions between propagule pressure, native diversity and local assembly processes in mediating invasion outcomes

Perhaps more than any other ecological discipline, invasion biology has married the practices of basic science and the application of that science. The conceptual frameworks of population regulation, metapopulations, supply-side ecology, and community assembly have all to some degree informed the regulation, management, and prevention of biological invasions. Invasion biology needs to continue to adopt emerging frameworks and paradigms to progress as both a basic and applied science. This need is urgent as the biological invasion problem continues to worsen. The development of metacommunity theory in the last two decades represents a paradigm-shifting approach to community ecology that emphasizes the multi-scale nature of community assembly and biodiversity regulation. Work on metacommunities has demonstrated that even relatively simple processes at local scales are often heavily influenced by regional-scale processes driven primarily by the dispersal of organisms. Often the influence of dispersal interacts with, or even swamps, the influence of local-scale drivers like environmental conditions and species interactions. An emphasis on dispersal and a focus on multi-scale processes enable metacommunity theory to contribute strongly to the advancement of invasion biology. Propagule pressure of invaders has been identified as one of the most important drivers facilitating invasion, so the metacommunity concept, designed to address how dispersal-driven dynamics affect community structure, can directly address many of the central questions of invasion biology. Here we revisit many of the important concepts and paradigms of biological invasions—propagule pressure, biotic resistance, enemy release, functional traits, neonative species, human-assisted transport,—and view those concepts through the lens of metacommunity theory. In doing so, we accomplish several goals. First, we show that work on metacommunities has generated multiple predictions, models, and the tools that can be directly applied to invasion scenarios. Among these predictions is that invasibility of a community should decrease with both local controls on community assembly, and the dispersal rates of native species. Second, we demonstrate that framing biological invasions in metacommunity terms actually unifies several seemingly disparate concepts central to invasion biology. Finally, we recommend several courses of action for the control and management of invasive species that emerge from applying the concepts of metacommunity theory.

A major aim in invasion ecology is to understand the role of exotic species in plant communities. Whereas most studies have explored the traits of exotic species in the context of the introduced community, functional comparisons of entire assemblages of species in their native and introduced communities have rarely been analysed. Taking advantage of the unidirectional invasion of plant species of European origin (i.e. colonizers) into California, this study aims to investigate the relative importance of plant traits, environmental factors and invasion status in biological invasions. We compared the functional structure (i.e. trait composition and diversity) along resource availability gradients in recipient and native Mediterranean grassland communities in California and Spain, respectively. Traits were related to resource use in above‐ground and below‐ground organs and reproductive strategy. We also investigated how niche differences vary along environmental gradients between coexisting colonizer and native species assemblages within communities. There were clear differences in the functional structure of Mediterranean grassland communities between regions, which were associated with the resource availability gradient. Paradoxically, the most acquisitive communities occurred in resource‐poor sites, highlighting that rapid acquisition and use of resources permit species to cope with environmental stress through stress avoidance. In Spain, colonizer species had greater specific leaf area than non‐colonizers. Yet, differences between colonizer and non‐colonizer species in Spain for other traits were mostly absent and did not change along the gradient. This might be a result of the greater native species richness as a consequence of the agricultural practices that have taken place in Europe for millennia and reflect that the entire species pool of grasslands is adapted to agricultural landscapes. In comparison, in California, colonizer species were more acquisitive in their use of resources than natives under favourable conditions, but functionally converged in resource‐limited sites. Synthesis. These results underscore that the importance of niche differences between native and colonizer species as a community assembly mechanism is strongly subjected to the influence of habitat filtering. Trait comparisons are context dependent, and a correct interpretation of filtering processes in community assembly requires a regional perspective.

One of the central aims in ecology is elucidating the mechanisms that shape community diversity. While biodiversity patterns across geographical gradients are often attributed both to local assembly processes and regional species pools, the distinct roles of these factors in shaping soil aerobic methanotrophic diversity remain underexplored. Using amplicon sequencing and bioinformatics analysis, this study focuses on comparing the relative importance of species pool and community assembly processes in shaping soil methanotrophic communities across three distinct plateaus in China: the Loess Plateau, the Qinghai-Tibetan Plateau, and the Inner Mongolian Plateau. Each of these plateaus includes three distinct steppe habitats: desert, meadow, and typical steppe. Our findings reveal that pmoA beta (β)-diversity followed a distance-decay pattern, which declined with geographical distance at different rates depending on the steppe type and area, potentially due to diverse mechanisms of community assembly. Moreover, a decoupling between β-diversity and gamma-diversity observed, suggesting that local community assembly mechanisms primarily account for variations in β-diversity patterns. Furthermore, the relative significance of these assembly processes (e.g., dispersal limitation, drift, environmental filtering, and biotic interactions) varies according to spatial scales and steppe types. Notably, the differential environmental conditions (such as soil pH, yearly average temperature, and precipitation) across scales and steppe habitats primarily modulate the intensity of these assembly processes, thereby influencing β-diversity. In summary, our study emphasizes the crucial role of local community assembly in changing soil methanotrophic β-diversity's geographical patterns, highlighting the significance of a nuanced understanding of these processes for effective conservation and management strategies.

Microbial communities commonly consist of a large number of rare taxa (RT) and few abundant taxa (AT), and it is important to identify the differences of the community assembly processes between RT and AT in response to environmental changes. However, the community assembly processes governing AT and RT in coastal wetland soils along an inundation gradient remain elusive. Here, an in situ mesocosm, with continuous inundation gradients and native mangrove Kandelia obovata or exotic cordgrass Spartina alterniflora, was established to determine the patterns and driving factors of community turnover and assembly processes of AT and RT. We found that RT exhibited a remarkably lower turnover rate than AT, and the niche breadth of RT was significantly narrower than that of AT. In comparison with AT, RT presented stronger phylogenetic signals for ecological preferences across environmental gradients. Null model analyses revealed that RT were more phylogenetically clustered and primarily governed by homogeneous selection, while AT were more overdispersed and dominated by dispersal limitation. Soil water content was the most decisive factor for community turnover and assembly processes of both AT and RT. Structural equation modeling analysis showed that RT were strongly associated with K. obovata biomass rather than S. alterniflora biomass, suggesting a strong relationship between RT and the growth of mangrove K. obovata Overall, our study revealed distinct assembly processes of soil AT and RT communities in coastal wetlands, which is crucial for mechanistic understanding of the establishment and maintenance of soil microbial diversity in coastal wetlands under conditions of global environmental changes.IMPORTANCE Coastal wetlands are one of the important ecosystems that play a crucial role in the regulation of climate change. Rare taxa (RT) exist in one habitat along with abundant taxa (AT). In this study, we found that RT exhibited narrower niche breadth and stronger phylogenetic signals than AT. Null model analyses showed that RT were more phylogenetically clustered and primarily governed by homogeneous selection, while AT were more overdispersed and dominated by dispersal limitation. Revealing the differences in the community assembly processes between AT and RT in coastal wetlands is critical to understand the establishment and maintenance of soil microbial diversity in coastal wetlands with regard to environmental changes.

Integrating climate, water chemistry and propagule pressure indicators into aquatic species distribution models

Propagule pressure and habitat characteristics are important factors used to predict the distribution of invasive alien species. For species exhibiting strong propagule pressure because of human-mediated introduction of species, indicators of introduction potential must represent the behavioral characteristics of humans. This study examined 64 agricultural ponds to assess the visibility of ponds from surrounding roads and its value as a surrogate of propagule pressure to explain the presence and absence of two invasive fish species. A three-dimensional viewshed analysis using a geographic information system quantified the visual exposure of respective ponds to humans. Binary classification trees were developed as a function of their visibility from roads, as well as five environmental factors: river density, connectivity with upstream dam reservoirs, pond area, chlorophyll a concentration, and pond drainage. Traditional indicators of human-mediated introduction (road density and proportion of urban land-use area) were alternatively included for comparison instead of visual exposure. The presence of Bluegill (Lepomis macrochirus) was predicted by the ponds' higher visibility from roads and pond connection with upstream dam reservoirs. Results suggest that fish stocking into ponds and their dispersal from upstream sources facilitated species establishment. Largemouth bass (Micropterus salmoides) distribution was constrained by chlorophyll a concentration, suggesting their lower adaptability to various environments than that of Bluegill. Based on misclassifications from classification trees for Bluegill, pond visual exposure to roads showed greater predictive capability than traditional indicators of human-mediated introduction. Pond visibility is an effective predictor of invasive species distribution. Its wider use might improve management and mitigate further invasion. The visual exposure of recipient ecosystems to humans is important for many invasive species that spread with frequent instances of human-mediated introduction.

Summary1. Understanding ecological strategies of invasive species relative to the entire native community is important in understanding and managing both the mechanisms and the potential impacts of invasion, but few studies have taken this approach.2. We utilize advances in plant ecology to compare functional traits of an invasive shrub species, autumn‐oliveElaeagnus umbellata, to those of the understorey native woody plant community in a southeast Michigan forest. We estimate species trait distributions for six leaf functional traits (specific leaf area, leaf laminar area, leaf dry matter content, leaf nitrogen content, leaf carbon: nitrogen ratio and delta15N) using a kernel estimator. We then use pairwise trait distance and overlaps to describe the ecological strategy of the invasive shrub relative to that of the native understorey woody plant community.3. The overlap of the invasive shrub’s trait distribution with those of the native species was found to be smaller than the overlap of a native shrub’s distribution with other native species, consistent with the empty niche hypothesis of invasion. However, the invasive species’ mean leaf functional trait values typically fall outside of the range of most native species’ mean trait values, suggesting the invasive shrub extends trait space for understorey individuals of the native woody plant community.4. The invasive shrub’s leaf trait values are characteristic of a sun‐demanding species, contradicting its presence in the shaded forest understorey community and its persistence in an empty niche. We propose that this novel use of leaf functional traits by the invasive shrub could indicate that the invasion is facilitated by additional mechanisms such as release from natural enemies, association with nitrogen‐fixing bacteria, use of an empty temporal niche (namely the light available to the understorey early in the growing season), bird dispersal or some synthesis of these factors.5. Synthesis and applications. This study develops plant functional trait theory by studying an invasive species within the context of the entire native woody plant community. The approach can improve our understanding of the potential mechanisms of an invasion event and suggest ecological consequences and related management strategies for the maintenance of native forest communities. Specifically, this study, along with known data on the invasive species, suggests aggressive management in sunny gap and edge habitat provides the best strategy for long‐term control.

Question: Does the seed density of invasive species affect establishment by native species in a bare ground context (following invasive species control efforts), and is it possible to promote transition to a native species dominated state by manipulating sowing density of the native community?Location: Experimental wetland basin in Chanhassen, Minnesota, USA.Methods: A mesocosm experiment investigated the influence of Phalaris arundinacea (invasive species) propagule pressure on establishment of native wet meadow species in the context of a newly restored wetland. Mesocosms were sown with P. arundinacea (0, 10, 50, 100, or 500 seeds/m2) and a mix of native species (3000 or 15000 seeds/m2).Results: When planted at densities > 100 seeds/m2, P. arundinacea increased suppression of native species. Also, high native seed density suppressed P. arundinacea biomass production. This effect was more pronounced when P. arundinacea seed density was high (> 100 seeds/m2), but high native seed density (15000 seeds/m2) did not suppress recruitment of P. arundinacea from seed.Conclusions: The transition from post‐control bare ground (a common result of efforts to control invasive species) to native species establishment depends on both native species and invader seed density. These results suggest that a threshold of P. arundinacea propagule pressure exists, beyond which transition to a native community is less likely without management intervention. P. arundinacea can establish in the presence of a newly developing native plant community, even at very low densities of P. arundinacea seed. Invader control (following initial site clearing efforts) is essential to native species establishment.

Ecological filters and availability of propagules play key roles structuring natural communities. Propagule pressure has recently been suggested to be a fundamental factor explaining the success or failure of biological introductions. We tested this hypothesis with a remarkable data set on trees introduced to Isla Victoria, Nahuel Huapi National Park, Argentina. More than 130 species of woody plants, many known to be highly invasive elsewhere, were introduced to this island early in the 20th century, as part of an experiment to test their suitability as commercial forestry trees for this region. We obtained detailed data on three estimates of propagule pressure (number of introduced individuals, number of areas where introduced, and number of years during which the species was planted) for 18 exotic woody species. We matched these data with a survey of the species and number of individuals currently invading the island. None of the three estimates of propagule pressure predicted the current pattern of invasion. We suggest that other factors, such as biotic resistance, may be operating to determine the observed pattern of invasion, and that propagule pressure may play a relatively minor role in explaining at least some observed patterns of invasion success and failure.

An ecosystem's invasibility is influenced by changes in biotic and abiotic resistances, which often occur due to shifts in the prevailing disturbance regime. The susceptibility of a community to intrusion by nonnative species may interact with propagule pressure to determine the extent of a biological invasion. We examined how propagule pressure, forest community structure, and disturbance interact to influence the invasibility of temperate Pacific Northwest forests by the newly invasive grass, perennial false-brome (Brachypodium sylvaticum). Our goal was to identify factors enabling shifts from establishment to population growth in B. sylvaticum populations at the edge of its expanding range. Ecological sampling methods were used to identify patterns in B. sylvaticum habitat. An inverse relationship between the amount of B. sylvaticum and all perennial vegetation types and soil litter depth was found, suggesting that disturbance might play a role in B. sylvaticum population establishment or growth. An experimental study was then performed to test the effects of disturbance, propagule pressure, and habitat on B. sylvaticum seedling establishment in sites where B. sylvaticum was already naturalized. We found evidence that disturbance of the soil and vegetation led to increased B. sylvaticum seedling recruitment within naturalized sites, especially where conditions of high propagule pressure and deciduous forest canopy existed. In contrast, B. sylvaticum populations dominated by coniferous forest canopy were much more invasible than deciduous forests and did not show increased seedling recruitment in response to our disturbance treatments. Our study shows how propagule pressure and plant community dynamics interact to alter the invasibility of Pacific Northwest forests allowing B. sylvaticum to transition from establishment to population growth thus allowing this weed to cause greater negative impacts on the ecosystem.

Setting the pace of life and constraining the role of members in food webs, body size can affect the structure and dynamics of communities across multiple scales of biological organization (e.g., from the individual to the ecosystem). However, its effects on shaping microbial communities, as well as underlying assembly processes, remain poorly known. Here, we analyzed microbial diversity in the largest urban lake in China and disentangled the ecological processes governing microbial eukaryotes and prokaryotes using 16S and 18S amplicon sequencing. We found that pico/nano-eukaryotes (0.22-20 μm) and micro-eukaryotes (20-200 μm) showed significant differences in terms of both community composition and assembly processes even though they were characterized by similar phylotype diversity. We also found scale dependencies whereby micro-eukaryotes were strongly governed by environmental selection at the local scale and dispersal limitation at the regional scale. Interestingly, it was the micro-eukaryotes, rather than the pico/nano-eukaryotes, that shared similar distribution and community assembly patterns with the prokaryotes. This indicated that assembly processes of eukaryotes may be coupled or decoupled from prokaryotes' assembly processes based on eukaryote cell size. While the results support the important influence of cell size, there may be other factors leading to different levels of assembly process coupling across size classes. Additional studies are needed to quantitatively parse the influence of cell size versus other factors as drivers of coordinated and divergent community assembly processes across microbial groups. Regardless of the governing mechanisms, our results show that there are clear patterns in how assembly processes are coupled across sub-communities defined by cell size. These size-structured patterns could be used to help predict shifts in microbial food webs in response to future disturbance.

Biological invasions are a key component of human-induced global change. The continuing increase in global wildlife trade has raised concerns about the parallel increase in the number of new invasive species. However, the factors that link the wildlife trade to the biological invasion process are still poorly understood. Moreover, there are analytical challenges in researching the role of global wildlife trade in biological invasions, particularly issues related to the under-reporting of introduced and established populations in areas with reduced sampling effort. In this work, we use high-quality data on the international trade in Nearctic turtles (1999-2009) coupled with a statistical modelling framework, which explicitly accounts for detection, to investigate the factors that influence the introduction (release, or escape into the wild) of globally traded Nearctic turtles and the establishment success (self-sustaining exotic populations) of slider turtles (Trachemys scripta), the most frequently traded turtle species. We found that the introduction of a species was influenced by the total number of turtles exported to a jurisdiction and the age at maturity of the species, while the establishment success of slider turtles was best associated with the propagule number (number of release events), and the number of native turtles in the jurisdiction of introduction. These results indicate both a direct and indirect association between the wildlife trade and the introduction of turtles and establishment success of slider turtles, respectively. Our results highlight the existence of gaps in the number of globally recorded introduction events and established populations of slider turtles, although the expected bias is low. We emphasize the importance of researching independently the factors that affect the different stages of the invasion pathway. Critically, we observe that the number of traded individuals might not always be an adequate proxy for propagule pressure and establishment success.

Mulching drive changes in soil microbial community assembly processes and networks across aggregate fractions

Ecological specialization is an important mechanism enhancing species coexistence within a given community. Yet, unravelling the effect of multiple selective evolutionary and ecological factors leading the process of specialization remains a key challenge in ecology. Subterranean habitats provide highly replicated experimental arenas in which to disentangle the relative contribution of evolutionary history (convergent evolution vs. character displacement) and ecological setting (environmental filtering vs. competitive exclusion) in driving community assembly. We tested alternative hypotheses about the emergence of ecological specialization using the radiation of a lineage of sheet‐weaver cave‐dwelling spiders as model system. We observed that at the local scale, a differential specialization to cave microhabitats generally parallels moderate levels of morphological similarity and close phylogenetic relatedness among species. Conversely, geographic distance contributed little in explaining microhabitat occupation, possibly mirroring a limited role of competitive exclusion. Yet, compared to non‐coexisting species, co‐occurring species adapted to different microhabitats showed lower morphological niche overlap (i.e. higher dissimilarity) and deeper genetic distance. The framework here developed suggests that in the subterranean domain, habitat specialization is primarily driven by environmental filtering, secondarily by convergent evolution, and only marginally by character displacement or competitive exclusion. This pattern results in the establishment of replicated communities across geographical space, composed by ecologically equivalent species. Such process of community assembly well explains the numerous adaptive radiations observed in subterranean habitats, an eco‐evolutionary pattern well documented in oceanic islands or mountain summit communities. A free Plain Language Summary can be found within the Supporting Information of this article.

Our latest research has shown that in order to be able to develop and maintain different final assembly systems and to further develop industrial work, the introduction of new types of product structures is a necessity. At the same time these new structures allow resistant relationships to be found as a basis for orientation, to exploit to a greater extent than previously the precise work of the design department in central pre–production and the various final assembly processes. This is possible in the motor vehicle industry since automobiles and trucks display certain generic characteristics. The consequence is that the information systems in use today and the company's transfer surfaces within the internal organization must be changed, which presupposes new types of product structures. This is especially important when the new long cycle assembly work is realized. This paper summarizes some experience and methods from the development of long cycle time assembly systems, and reports general questions valid for the person or the company intending to humanize and make assembly work more efficient, and illustrates these questions with specific 'delimited' examples. Here we refer principally to the development of ways of describing products. Our results are based on several years' collaboration, characterized as action research, between researchers and practitioners mainly within the Volvo Car and Volvo Truck Corporations. The work has led to real implementation of research results in industrial environments. When designing alternatives to traditional line–assembly, we advocate a generally applicable product structure as a basis, which is then adapted to different local final assembly plants. When this approach is used it has proved to be important to define principles of differentiation between causal and taxonomic descriptions and the use of stereometric models of products and local assembly processes in relation to central design and pre–production departments is essential. In this paper, we report a number of practical examples to illustrate the empiric support for the reasoning applied, and these in turn have necessitated certain modifications to the original basic stereometric model that we have published previously. These modifications are also based on practical experience which is not explicitly reported in this paper.