Invasive weed optimization-based automatic generation control for multi-area power systems

This research article focuses on Automatic Generation Control (AGC) with application of a multistage controller constructed by adding (1+Proportional Integral) with Proportional Derivative with Filter (PDF) in multi source type two area non-linear electrical network. To make system non-linearity and realistic a Generation Rate Constraint (GRC) of 3% is considered in each area. In this multi area power system each area comprises a Thermal unit, Hydro unit and a Gas power generation unit. For obtaining globally optimal solution a Salp Swarm Optimization (SSO) algorithm is applied to tune the gain parameters of above proposed multistage controller. For comparative analysis some controllers like PID and PI controllers are implemented individually apart from this proposed controller. Superiority analysis of above nature inspired SSO algorithm is carried out by comparing it with Cuckoo search algorithm (CSA), Genetic Algorithm (GA) and Particle Swarm Optimization (PSO) algorithm. While optimizing different parameters of system (if any) and above controller, Integral of Time multiplied Absolute Error (ITAE) has been implementing as objective function.

Automatic generation control of multi-area power systems with diverse energy sources using Teaching Learning Based Optimization algorithm

In view of the traditional numerical method to solve the nonlinear equations exist is sensitive to initial value and the higher accuracy of defects. This paper presents an invasive weed optimization (IWO) algorithm which has population diversity with the heuristic global search of differential evolution (DE) algorithm. In the iterative process, the global exploration ability of invasive weed optimization algorithm provides effective search area for differential evolution; at the same time, the heuristic search ability of differential evolution algorithm provides a reliable guide for invasive weed optimization. Based on the test of several typical nonlinear equations and a circle packing problem, the results show that the differential evolution invasive weed optimization (DEIWO) algorithm has a higher accuracy and speed of convergence, which is an efficient and feasible algorithm for solving nonlinear systems of equations.

Optimal control of DC motor using leader-based Harris Hawks optimization algorithm

In this paper, a novel hybrid Invasive Weed Optimization (IWO) and Cuckoo Search (CS) algorithm (IWO/CS) is presented for phase-only pattern synthesis of large array antenna. The hybrid IWO/CS algorithm embeds the Levy flight of CS algorithm into IWO algorithm as a global guide, thereby enhancing the global search ability of the algorithm. At the same time, in order to avoid trapping into the local optimal solution, mutation operator is introduced to enhance search ability of the algorithm. Finally, competitive exclusion operation is improved to maintain the diversity of population. The hybrid algorithm is applied to phase-only beam shaping to achieve main lobe broadening and side lobe depression. Simulation results demonstrate the superiority of the hybrid IWO and CS algorithm.

Recommender systems intend to help users find their interested items from among a large number of items. We continue our previous work that emphasizes on approach as an effective approach to increase the quality of the recommendations. Prioritized user-profile is an approach that tries to implement more personalized recommendation by assigning different priority importance to each of the features of the user-profile for different users. In order to find the optimal priorities for each user an optimization algorithm is needed. In this paper, we employ a new optimization algorithm namely invasive weed optimization (IWO) for this purpose. IWO is a relatively new and simple algorithm inspired from the invasive habits of growth of weeds in nature. Experimental results showed that IWO achieved the best accuracy in predicting users' interests compared to two other prioritized approaches which were based on genetic algorithm (GA) and particle swarm optimization (PSO) and to standard user-based Pearson algorithm on a movie dataset.

The optimal hydropower operation of reservoir systems is known as a complex nonlinear nonconvex optimization problem. This paper presents the application of invasive weed optimization (IWO) algorithm, which is a novel evolutionary algorithm inspired from colonizing weeds, for optimal operation of hydropower reservoir systems. The IWO algorithm is used to optimally solve the hydropower operation problems for both cases of single reservoir and multi reservoir systems, over short, medium and long term operation periods, and the results are compared with the existing results obtained by the two most commonly used evolutionary algorithms, namely, particle swam optimization (PSO) and genetic algorithm (GA). The results show that the IWO is more efficient and effective than PSO and GA for both single reservoir and multi reservoir hydropower operation problems.

AGC of a multi-area power system under deregulated environment using redox flow batteries and interline power flow controller

In this paper, a hybrid meta-heuristic artificial intelligence (AI) method, named “ANFIS–PSOGA,” is developed for modeling the discharge coefficient of circular side orifices for the first time. For this purpose, the adaptive neuro fuzzy inference system (ANFIS) network is optimized by means of two robust optimization algorithms: the genetic algorithm (GA) and the particle swarm optimization (PSO) algorithm. Furthermore, the Monte Carlo simulations are utilized to enhance the performance of the AI hybrid model. Besides, the k-fold cross-validation method is employed in order to verify the numerical results. Initially, the performance of three fuzzy inference system (FIS) generations of the ANFIS model including grid partitioning, subtractive clustering and fuzzy C-means clustering are evaluated. After that, using the parameters affecting the discharge coefficient, eleven ANFIS models are defined and then the best ANFIS model and the most influencing input parameters are identified through the conduction of a sensitivity analysis. For the superior ANFIS model, mean absolute percentage error, root-mean-square error and the correlation coefficient (R) are obtained 0.021, 0.020 and 0.871, respectively. Also, the Froude number (Fr) is detected as the most effective input parameter. Moreover, the discharge coefficient of the circular side orifices and the flow field within main channels along the side orifices are simulated through the adoption of a computational fluid dynamics (CFD) model. Additionally, the flow field at three different cross sections (beginning, middle and end of orifice) along the side weir is evaluated. For instance, by advancing the flow toward the side orifice, the Froude number is reduced. Besides, at each cross section, the maximum shear stress is estimated to occur in the vicinity of the crest of the circular side orifice. According to the CFD results, the maximum lateral velocity is estimated near the circular side orifice. In addition, the results yielded by the ANFIS, ANFIS–PSO, ANFIS–PSOGA and CFD models are compared and an uncertainty analysis is carried out for the models. Based on the comparison, ANFIS–PSOGA has the best performance in simulating the discharge coefficient. Ultimately, a simple and practical computer code for the best model (ANFIS–PSOGA) is proposed which can be easily used by scholars and engineers in practical usages.

An ecologically inspired optimization algorithm, called invasive weed optimization (IWO), is presented for the design of non-uniform, planar, and circular antenna arrays that can achieve minimum side lobe levels for a specific first null beamwidth while avoiding the mutual coupling effects simultaneously. IWO recently emerged as a derivative-free real parameter optimizer that mimics the ecological behavior of colonizing weeds. For the present application, classical IWO has been modified by introducing a more explorative routine of changing the standard deviation of the seed population (equivalent to mutation step-size in evolutionary algorithms) of the algorithm. Simulation results over three significant instances of the circular array design problem have been presented to illustrate the effectiveness of the modified IWO algorithm. The design results obtained with modified IWO have been shown to comfortably beat those obtained with other state-of-the-art metaheuristics like genetic algorithm (GA), particle swarm optimization (PSO), original IWO and differential evolution (DE) in a statistically meaningful way.

This study aimed to optimize Adaptive Neuro-Fuzzy Inferences System (ANFIS) with two optimization algorithms, namely, Genetic Algorithm (GA) and Particle Swarm Optimization (PSO) for the calculation friction capacity ratio (α) in driven shafts. Various studies are shown that both ANFIS are valuable methods for prediction of engineering problems. However, optimizing ANFIS with GA and PSO has not been used in the area of pile engineering. The training data set was collected from available full-scale results of the driven piles. The input parameters used in this study were pile diameter (m), pile length (m), relative density (Id), embedment ratio (L/D), both of the pile end resistance (qc) and base resistance at relatively 10% base settlement (qb0.1) from CPT result, whereas the output was α. A learning fuzzy-based algorithm was used to train the ANFIS model in the MATLAB software. The system was optimized by changing the number of clusters in the FIS and then the output was used for the GA and PSO optimization algorithm. The prediction was compared with the real-monitoring field data. As a result, good agreement was attained representing reliability of all proposed models. The estimated results for the collected database were assessed based on several statistical indices such as R2, RMSE, and VAF. According to R2, RMSE, and VAF, values of (0.9439, 0.0123 and 99.91), (0.9872, 0.0117 and 99.99), and (0.9605, 0.0119 and 99.97) were obtained for testing data sets of the optimized ANFIS, GA–ANFIS, and PSO–ANFIS predictive models, respectively. This indicates higher reliability of the optimized GA–ANFIS model in estimating α ratio in driven shafts.

Firefly algorithm (FFA) optimization technique is a popular continuous optimization technique and also widely applied to tune controller gain values of proportional–integral–derivative (PID) controller. In the chaos-based firefly algorithm, the chaotic maps are included to improve the randomness when generating new solutions and thereby to increase the diversity of the population. It increases global search mobility for robust global optimization. The investigated power system incorporates two thermal power systems, and two areas are interconnected via tie-line. Also, this work system is equipped with a secondary (PID) controller. The gain value of the controller is optimized by implementing chaos-based firefly algorithm (CFFA) by applying step load in area 1. The effectiveness and supremacy of proposed optimization technique tuned controller performance are verified by comparing genetic algorithm (GA), particle swarm optimization (PSO) technique and firefly algorithm tuned PID controller performance in the same interconnected power system. The proposed optimization technique-based controller response is evaluated by considering time domain specifications parameters of the proposed optimization technique-based controller response. Further, effectiveness of recommended optimization technique is verified by adding nonlinearity’s [generation rate constraint (GRC) and governor dead band (GCB)] in the investigated power system with connecting unified power flow controller (UPFC) is applied, and it is a flexible alternating current transmission system (FACTS) controller family device connected parallel to the tie-line. Further, hydrogen aqua electrolyzer (HAE) energy storage unit with a fuel cell is connected in area 2 for improving the performance of the system during sudden load demand. Finally, simulation result proved that the proposed CFFA technique gives better controlled performance compared with GA, PSO and FFA technique tuned controller performance in terms of fast settled response with a minimum peak over and undershoot, damping oscillations during unexpected load demand conditions.

Trajectory planning algorithm based on MIWO used for nondestructive testing of EAST divertor

This paper proposes a robust control strategy involving a novel optimised fuzzy-PID controller tuning by particle swarm optimisation (PSO) algorithm. The proposed control strategy was suggested to design an intelligent load frequency control (LFC) scheme in multi-area interconnected power system. The PSO algorithm was employed to optimise the fuzzy-PID controller parameters including the scaling factors of fuzzy logic and the PID controller gains for minimisation of both system frequency deviation and tie-line power changes during load disturbances using the integral time multiply absolute error (ITAE) as objective function. To demonstrate the effectiveness of the proposed control strategy, the three-area 9-unit interconnected power system was used for the simulation. The superiority of the proposed approach was shown by comparing the obtained results to other strategies available in literature. Initially, the simulation was performed using the same controllers in each area, and then was extended with different controllers in each area. The comparative study demonstrates the potential of the proposed control strategy and shows its robustness to enhance frequency stability.

In this paper, a modified invasive weed optimization (IWO) algorithm is presented for optimization of multiobjective flexible job shop scheduling problems (FJSSPs) with the criteria to minimize the maximum completion time (makespan), the total workload of machines and the workload of the critical machine. IWO is a bio-inspired metaheuristic that mimics the ecological behaviour of weeds in colonizing and finding suitable place for growth and reproduction. IWO is developed to solve continuous optimization problems that’s why the heuristic rule the Smallest Position Value (SPV) is used to convert the continuous position values to the discrete job sequences. The computational experiments show that the proposed algorithm is highly competitive to the state-of-the-art methods in the literature since it is able to find the optimal and best-known solutions on the instances studied.