ISAR imaging of multiple targets based on FrFT-CLEAN

Inverse synthetic aperture radar (ISAR) imaging is typically useful when there is a need to classify, recognize, or identify a moving target of interest. In fact, an ISAR image highlights two-dimensional (2-D) geometric features of a target, which can provide indications of target's type, size, and other salient information. Such information can be then used for target classification, recognition, and identification. In this chapter, we will provide five case studies on applications of ISAR imaging. Such case studies are chosen to diversify the type of application and to give additional indications about how to interpret ISAR images. Specifically, in the first case study (Section 12.1), we show an example of ground-based ISAR images of a noncooperative sailing ship. The ISAR techniques used to form the ISAR images are the range-Doppler (Chapter 3) and the ICBA (Chapter 5) techniques. Different time windows are chosen to show the effects of the coherent processing interval (CPI) length on the ISAR image. Since the radar is ground based, this represents a case where the ISAR image is formed by exploiting only the sea surface induced target's motions. The second case study (Section 12.2) refers to a scenario where the radar is carried by an aircraft and the target is a ship at sea. In this case, both the target and the platform motions concur to the ISAR image formation. Also in this case, the range-Doppler and ICBA are used to form the ISAR image sequence. The third case study (Section 12.3) concerns dual ground-based/satellite ISAR imaging of a noncooperative sailing ship. In this experiment two radars are used to image a sailing ship at the same time. Two techniques are here used to form the ISAR images: a refocus technique (see Chapter 8) to form the satellite ISAR image; and a range-Doppler with ICBA to form the ground-based ISAR image. In this case study, we show how a dual system is able to form ISAR images of the same target with different target's views and projections. This is a simple case of multiple-perspective ISAR images, which may be looked at as a way to improve a target's classification and recognition [1]. The fourth case study (Section 12.4) shows ISAR images of four aircrafts obtained by processing data acquired with a ground-base radar. This case study may be regarded as the classic ISAR imaging example. Four different airplanes have been selected to show how their characteristics are mapped onto ISAR images. Such characteristics can then be used by classifiers for recognition purposes.

In this paper, performance efficiency analysis of compressive inverse synthetic aperture radar (ISAR) imaging for a complex, electrically large target is presented. In this context, physical optics (PO) is used as a high-frequency scattered field prediction technique and compressive sensing (CS) theory is applied to ISAR imaging by exploiting the sparse point scatterer structure of the target. Results prove that CS provides high resolution and accuracy in ISAR imaging even under the Nyquist sampling rate and linearly decreases computational time.

High‐resolution inverse synthetic aperture radar (ISAR) imaging of ship target has attracted the attention of many scholars all around the world. For the complex motion of the ship, the Doppler frequency shifts of the scatterers are actually time‐varying, and the received signals in a range bin can be characterised as multi‐component amplitude‐modulated and frequency‐modulated (AM–FM) signals. In this study, the AM–FM signals are approximated as a weighted sum of multiple Chirplets, and a novel approach for high‐resolution ISAR imaging of ship target based on the product cubic phase function (PCPF) for Chirplet decomposition is proposed. The PCPF algorithm can reduce the cross‐terms between different Chirplet components, and combined with the range‐instantaneous‐Doppler technique, the high‐resolution instantaneous ISAR images can be obtained. Results of simulated and real data demonstrate the effectiveness of the method proposed.

Inverse synthetic aperture radar (ISAR) images are frequently used in target classification and recognition applications. Nevertheless, the interpretation of ISAR images remains problematic for several reasons. One of these is the fact that the image plane cannot be defined by the user but instead depends on the target's own motions and on its relative position with respect to the radar. In order to overcome the problem of interpreting two-dimensional (2D) ISAR images, a method for three-dimensional (3D) reconstruction of moving targets is presented. This method is based on the use of a dual interferometric ISAR system. The interferometric phases measured from two orthogonal baselines are used to jointly estimate the target's effective rotation vector and the heights of the scattering centers with respect to the image plane. The scattering center extraction from the ISAR image is performed by applying a multichannel CLEAN technique. Finally, a 3D image of the moving target is reconstructed from the 3D spatial coordinates of the scattering centers. The effectiveness and robustness of the proposed algorithm is first proven theoretically and then tested against several radar-target scenarios as well as in the presence of noise.

Inverse synthetic aperture radar (ISAR) imaging of a non-cooperative manoeuvring target is a challenging task due to its time-varying orientation and rotation velocity which denies accurate measurement. This paper investigates the general principles of ISAR imaging of manoeuvring targets, and proposes an algorithm for application in situations when the manoeuvrability is not too serious and the Doppler variation of sub-echoes from scatterers can be approximated as a first order polynomial. The imaging results using real data show the effectiveness of the new method.

For the Inverse Synthetic Aperture Radar (ISAR) imaging, the ISAR image obtained by the Range-Doppler (RD) or time-frequency analysis methods can not display the target's real shape due to its azimuth relating to the target Doppler frequency, thus the cross-range scaling is required for ISAR image. In this paper, a fast cross-range scaling method for ISAR is proposed to estimate the Rotational Angular Velocity (RAV). Firstly, the proposed method utilizes efficient Pseudo Polar Fast Fourier Transform (PPFFT) to transform the rotational motion of two ISAR images from two different instant time into translation in the polar angle direction. Then, a new cost function called integrated correction is defined to obtain the RAV coarse estimation. Finally, the optimal RAV can be estimated using the Bisection method to realize the cross-range scaling. Compared with the available algorithms, the proposed method avoids the problems of precision loss and high computational complexity caused by interpolation operation. The results of computer simulation and real data experiments are provided to demonstrate the validity of the proposed method.

In inverse synthetic aperture radar (ISAR) imaging of targets with complex motion such as the high maneuvering airplanes and fluctuating ships with oceanic waves, the azimuth echo signals can be modeled with cubic chirps after translational motion compensation, and then, the azimuth focusing quality will be deteriorated by the time-varying chirp rate. In this paper, a parameter estimation method of cubic chirps is proposed based on the discrete chirp Fourier transform (DCFT), which is generated from DCFT for quadratic chirps. Several properties of DCFT for cubic chirps are derived, and we show that the modified DCFT (MDCFT) is more appropriate to deal with the practical applications (e.g., ISAR imaging) than the original DCFT. Therefore, we put forward the imaging algorithm based on MDCFT, and then, simulation results confirm the validity of the proposed algorithm.

For targets with complex motions, the time-varying Doppler frequency deteriorates inverse synthetic aperture radar (ISAR) images. After range alignment and phase adjustment, azimuth echoes in a range cell can be modeled as multicomponent cubic phase signals (CPSs). The chirp rate and the quadratic chirp rate of the CPS are identified as the causes of the time-varying Doppler frequency; thus, it is necessary to estimate these two parameters correctly to obtain a well-focused ISAR image. The parameter-estimation algorithm based on the modified chirp rate-quadratic chirp rate distribution (M-CRQCRD) is proposed for the CPS and applied to the ISAR imaging of targets with complex motions. The computational cost of M-CRQCRD is low, because it can be implemented by the fast Fourier transform (FFT) and the nonuniform FFT easily. Compared to two representative parameter-estimation algorithms, the M-CRQCRD can acquire a higher antinoise performance due to the introduction of an optimal lag-time. Through simulations and analyses for the synthetic radar data, the effectiveness of the M-CRQCRD and the imaging algorithm based on the M-CRQCRD are verified.

In the current scenario of high-resolution inverse synthetic aperture radar (ISAR) imaging, the non-cooperative targets may have strong maneuverability, which tends to cause time-variant Doppler modulation and imaging plane in the echoed data. Furthermore, it is still a challenge to realize ISAR imaging of maneuvering targets from sparse aperture (SA) data. In this paper, we focus on the problem of 3D geometry and motion estimations of maneuvering targets for interferometric ISAR (InISAR) with SA. For a target of uniformly accelerated rotation, the rotational modulation in echo is formulated as chirp sensing code under a chirp-Fourier dictionary to represent the maneuverability. In particular, a joint multi-channel imaging approach is developed to incorporate the multi-channel data and treat the multi-channel ISAR image formation as a joint-sparsity constraint optimization. Then, a modified orthogonal matching pursuit (OMP) algorithm is employed to solve the optimization problem to produce high-resolution range-Doppler (RD) images and chirp parameter estimation. The 3D target geometry and the motion estimations are followed by using the acquired RD images and chirp parameters. Herein, a joint estimation approach of 3D geometry and rotation motion is presented to realize outlier removing and error reduction. In comparison with independent single-channel processing, the proposed joint multi-channel imaging approach performs better in 2D imaging, 3D imaging, and motion estimation. Finally, experiments using both simulated and measured data are performed to confirm the effectiveness of the proposed algorithm.

Inverse synthetic aperture radar (ISAR) imaging has the competence of generating two-dimensional (2-D) high-quality images of remote moving targets, while interferometric ISAR (InISAR) is a technique to reproduce three-dimensional (3-D) high-resolution shapes of targets by employing several ISAR images obtained from different antennas. For the target moving with an invariable acceleration, the Doppler frequency shift of its echoes is proved to be time variant; consequently, the Range-Doppler (RD) algorithm will not work properly for acquiring the clear ISAR image of it. To produce high-resolution ISAR/InISAR image of the maneuvering target, a novel algorithm via the peak extraction technique is proposed. The main contributions made by this paper can be listed as follows: 1) by analyzing ISAR imaging with the RD technique for the target moving with a constant acceleration, it is elaborately demonstrated that each scattering point still corresponds to a unique peak in the defocused ISAR image; 2) the expression of the peak location in the defocused ISAR image corresponding to each scattering point is precisely derived; 3) a novel peak extraction technique is developed for forming a high-resolution radar image of the maneuvering target; 4) due to the discovery that the ISAR images obtained in this way can completely preserve the phase information, a new InISAR imaging method via the peak extraction technique is presented consequently. The correctness of the theoretical derivation and the performance of the new algorithms are illustrated through several simulation experiments.

ISAR imaging of target with complex motion associated with the fractional Fourier transform

ISAR imaging of dynamic target is very significant in real applications. Plenty of available outcomes have been acquired by the scholars in the near years. Considering the accuracy and the computational complexity, the radar echo can be described as multicomponent QFM signal after envelope alignment with initial phase calibration. Many parametric algorithms in this case have been developed recently. This paper provides a comprehensive summarization of the ISAR imaging approach with QFM signal model in recent years, with the aim to introduce the research progress of it to the researchers and interested readers.

Sub-Nyquist sampling is a common means of interfering with inverse synthetic aperture radar (ISAR) imaging, which has been validated for the feasibility of 1-D compressive sensing (CS) ISAR imaging. In order to overcome the high computational complexity of 1-D CS-based ISAR imaging, the coupled 2-D CS algorithms are utilized to achieve ISAR imaging directly which has been proposed recently. In this paper, sub-Nyquist sampling jamming signals are utilized to induce multiple false-target ISAR images by using the coupled 2-D-CS algorithm. The jamming signals, which are formed by the intercepted radar signals under the sub-Nyquist sampling theorem and scattered by moving targets, are collected by ISAR to establish a 2-D super resolution model, and the finally reconstructed ISAR images are induced and show that the deceptive false-target images retaining the real target information. Simulated trails and real data of a Yak-42 plane are used to validate the correctness of the analyses and the finally well-focused false-target images greatly support the effectiveness of the sub-Nyquist sampling idea in the countermeasures of ISAR with coupled 2-D CS.

The high orbit height leads to the ultralow signal-to-noise ratio (ULSNR) of geosynchronous (GEO) targets, so it is necessary to increase the coherent processing interval (CPI) to improve the coherent accumulation gain. The ultra-long CPI (ULCPI) causes wide rotational angles and complex signal modulation, which poses a serious challenge to conventional inverse synthetic aperture radar (ISAR) imaging algorithms. Moreover, the high orbit height and high-speed motion of GEO targets make the “stop-and-go” model no longer applicable, and intra-pulse motion errors must be taken into consideration. To address the problems, this article proposes a high-resolution ISAR imaging algorithm with joint intra-pulse and inter-pulse high-order motion compensation (JIPHOMC) and sub-aperture images fusion for GEO targets at ULCPI. In this technique, ULCPI is divided into several sub-apertures. Then, with respect to the motion compensation in sub-apertures, we innovatively propose a JIPHOMC algorithm with particle swarm optimization (PSO), which can correct the complex spatial-time-variant (STV) motion errors caused by wide rotational angles and high-speed motion, and eliminate the 2-D high-order coupling. By utilizing image overall constraints, JIPHOMC avoids signal source decomposition processing, thereby boosting algorithm efficiency and robustness. For the sub-aperture images obtained from different perspectives, we develop a sub-aperture image fusion algorithm (SAIF) based on non-negative matrix factorization (NMF) of structured weighted sparse enhancement, which can ensure the integrity of the target structure and enhance the image signal-to-noise ratio (SNR), so as to achieve high-resolution ISAR imaging of GEO targets at ULCPI. Extensive experiments based on both scattering point simulation data and electromagnetic calculation data corroborate that the proposed algorithm outperforms traditional ISAR imaging methods for GEO targets at ULCPI.

Combining traditional inverse synthetic aperture radar (ISAR) imaging, interferometry technique and compressed sensing (CS), we studied the problem of interferometric ISAR imaging with sparse aperture. Based on the elaborate analysis of smoothed l0 algorithm in CS, we proposed joint smoothed l0 algorithm which is capable of maintaining coherence between ISAR images of different radars under sparse aperture, thus it could be applied to interferometric ISAR imaging. Besides, we discussed the relationship between sparsity degree and the precision of interferometric ISAR imaging result. Simulation results validate the effectiveness of proposed algorithm and rationality of our conclusions.