Joint Resource and Trajectory Optimization for Heterogeneous-UAVs Enabled Aerial-Ground Cooperative Computing Networks

Due to flexible scheduling, and better transmission channel, unmanned aerial vehicle (UAV) can improve transmit performance of Internet of Things (IoT). In this paper, we propose an UAV-enabled multichannel IoT based on intelligent fog computing, where UAV as a relay forwards IoT's information to the data center under the control of fog computing base station in the case of terrestrial channel fading. The IoT's throughput are maximized by jointly optimizing subcarrier, power of IoT, and UAV, and UAV trajectory, subject to the constraints of information causality, maximum transmit power, and maximum UAV speed. The subcarriers are dynamically allocated according to their channel gains, the water filling algorithm is adopted to optimize the power for UAV, and IoT by fixing UAV trajectory, and the optimal UAV trajectory is achieved with successive convex approximation under the fixed power allocation. Then a jointly iterative optimization on subcarrier, power, and trajectory is presented to get the optimal solution. In addition, we propose a fairness optimization scheme to maximize the minimum transmit rate of IoT nodes. The simulations indicate the IoT with mobile UAV, and dynamic subcarrier allocation may achieve better transmit performance, and the fairness optimization can decrease the rate difference of nodes effectively.

Unmanned aerial vehicle (UAV)-assisted mobile edge computing (MEC) system is a prominent strategy where a UAV equipped with an MEC server is deployed to serve terminal devices. This paper considers a multi-UAV assisted network in which multiple UAVs and a terrestrial base station (BS) are deployed to provide MEC services to mobile users. The objective is to minimize an energy and latency-based cost function by jointly optimizing task offloading and MEC server selection decision, transmission power, UAV trajectory, and CPU frequency allocation. An alternating iterative approach based on the block descent method is proposed to solve this problem. In the first layer, task offloading and server selection decision subproblem is solved using a game theoretic approach. The second layer handles offloading and downloading transmission power allocations by utilizing a simplistic geometric waterfilling (GWF) technique, and the UAV trajectory by successive convex approximation (SCA). Whereas, the third layer solves the computation resource subproblem by performing CPU frequency allocation using a gradient descent method. The proposed method uses a segment-by-segment approach, which divides the entire UAV flight trajectory into shorter timeframe segments to reduce the computation time. Simulation results are presented to show that the proposed approach outperforms various benchmark schemes.

Caching the contents of unmanned aerial vehicles (UAVs) could significantly improve the content fetching performance of request users (RUs). In this paper, we study UAV trajectory design, content fetching, power allocation, and content placement problems in multi-UAV-aided networks, where multiple UAVs can transmit contents to the assigned RUs. To minimize the energy consumption of the system, we develop a constrained optimization problem that simultaneously designs UAV trajectory, power allocation, content fetching, and content placement. Since the original minimization problem is a mixed-integer nonlinear programming (MINLP) problem that is difficult to solve, the optimization problem was first transformed into a semi-Markov decision process (SMDP). Next, we developed a new technique to solve the joint optimization problem: option-based hierarchical deep reinforcement learning (OHDRL). We define UAV trajectory planning and power allocation as the low-level action space and content placement and content fetching as the high-level option space. Stochastic optimization can be handled using this strategy, where the agent makes high-level option selections, and the action is carried out at a low level based on the chosen option’s policy. When comparing the proposed approach to the current technique, the numerical results show that it can produce more consistent learning performance and reduced energy consumption.

This paper investigates a new scenario of spectrum sharing between unmanned\naerial vehicle (UAV) and terrestrial wireless communication, in which a\ncognitive/secondary UAV transmitter communicates with a ground secondary\nreceiver (SR), in the presence of a number of primary terrestrial communication\nlinks that operate over the same frequency band. We exploit the UAV's mobility\nin three-dimensional (3D) space to improve its cognitive communication\nperformance while controlling the co-channel interference at the primary\nreceivers (PRs), such that the received interference power at each PR is below\na prescribed threshold termed as interference temperature (IT). First, we\nconsider the quasi-stationary UAV scenario, where the UAV is placed at a static\nlocation during each communication period of interest. In this case, we jointly\noptimize the UAV's 3D placement and power control to maximize the SR's\nachievable rate, subject to the UAV's altitude and transmit power constraints,\nas well as a set of IT constraints at the PRs to protect their communications.\nNext, we consider the mobile UAV scenario, in which the UAV is dispatched to\nfly from an initial location to a final location within a given task period. We\npropose an efficient algorithm to maximize the SR's average achievable rate\nover this period by jointly optimizing the UAV's 3D trajectory and power\ncontrol, subject to the additional constraints on UAV's maximum flying speed\nand initial/final locations. Finally, numerical results are provided to\nevaluate the performance of the proposed designs for different scenarios, as\ncompared to various benchmark schemes. It is shown that in the quasi-stationary\nscenario the UAV should be placed at its minimum altitude while in the mobile\nscenario the UAV should adjust its altitude along with horizontal trajectory,\nso as to maximize the SR's achievable rate in both scenarios.\n

With the rapid development of mobile edge computing (MEC) and unmanned aerial vehicle (UAV) communication networks, UAV-assisted edge computing has emerged as a promising paradigm for low-latency and energy-efficient computation. However, the time-varying nature of air-to-ground channels and the coupling between UAV trajectories and computation offloading decisions significantly increase system complexity. To address these challenges, this paper proposes an Adaptive UAV Edge Intelligence Framework (AUEIF) for joint UAV computation offloading and trajectory optimization under dynamic channels. Specifically, a dynamic graph-based system model is constructed to characterize the spatio-temporal correlation between UAV motion and channel variations. A hierarchical reinforcement learning-based optimization framework is developed, in which a high-level actor–critic module is responsible for generating coarse-grained UAV flight trajectories, while a low-level deep Q-network performs fine-grained optimization of task offloading ratios and computational resource allocation in real time. In addition, an adaptive channel prediction module leveraging long short-term memory (LSTM) networks is integrated to model temporal channel state transitions and to assist policy learning and updates. Extensive simulation results demonstrate that the proposed AUEIF achieves significant improvements in end-to-end latency, energy efficiency, and overall system stability compared with conventional deep reinforcement learning approaches and heuristic-based schemes while exhibiting strong robustness against dynamic and fluctuating wireless channel conditions.

With the ongoing advancement of electric power Internet of Things (IoT), traditional power inspection methods face challenges such as low efficiency and high risk. Unmanned aerial vehicles (UAVs) have emerged as a more efficient solution for inspecting power facilities due to their high maneuverability, excellent line-of-sight communication capabilities, and strong adaptability. However, UAVs typically grapple with limited computational power and energy resources, which constrain their effectiveness in handling computationally intensive and latency-sensitive inspection tasks. In response to this issue, we propose a UAV task offloading strategy based on deep reinforcement learning (DRL), which is designed for power inspection scenarios consisting of mobile edge computing (MEC) servers and multiple UAVs. Firstly, we propose an innovative UAV-Edge server collaborative computing architecture to fully exploit the mobility of UAVs and the high-performance computing capabilities of MEC servers. Secondly, we established a computational model concerning energy consumption and task processing latency in the UAV power inspection system, enhancing our understanding of the trade-offs involved in UAV offloading strategies. Finally, we formalize the task offloading problem as a multi-objective optimization issue and simultaneously model it as a Markov Decision Process (MDP). Subsequently, we proposed a task offloading algorithm based on a Deep Deterministic Policy Gradient (OTDDPG) to obtain the optimal task offloading strategy for UAVs. The simulation results demonstrated that this approach outperforms baseline methods with significant improvements in task processing latency and energy consumption.

This paper studies the integration of data collection and offloading for maritime Internet of Things (IoT) systems with multiple unmanned aerial vehicles (UAVs). In the considered multi-UAV maritime IoT system, the UAVs act as the aerial base stations to complete the missions of data collection from buoys and data offloading to the offshore base station (OBS). In this case, the UAVs need to adaptively select the mission mode between data collection and data offloading according to the network resources and mission requirements. In this paper, we aimed to minimize the completion time of data collection and offloading missions for all UAVs by jointly optimizing the UAV trajectories, mission mode selection, transmit power of buoys, and association relationships between the UAVs and buoy/OBS. In order to solve the mixed-integer non-convex minimization problem, we first designed a multi-agent deep reinforcement learning algorithm based on a hybrid discrete and continuous action space to preliminarily obtain the UAV trajectories, mission mode selection, and the transmit power of buoys. Then, we propose an algorithm based on the stable marriage problem to determine the buoy–UAV and UAV–OBS association relationships. Finally, the simulation results show that the proposed algorithms can effectively shorten the total mission completion time of data collection and offloading for the multi-UAV-assisted maritime IoT system.

This paper studies an unmanned aerial vehicle (UAV)-enabled multiple access channel (MAC), in which multiple ground users transmit individual messages to a mobile UAV in the sky. We consider a linear topology scenario, where these users locate in a straight line and the UAV flies at a fixed altitude above the line connecting them. Under this setup, we jointly optimize the one-dimensional (1D) UAV trajectory and wireless resource allocation to reveal the fundamental rate limits of the UAV-enabled MAC, under the users' individual maximum power constraints and the UAV's maximum flight speed constraints. First, we consider the capacity-achieving non-orthogonal multiple access (NOMA) transmission with successive interference cancellation (SIC) at the UAV receiver. In this case, we characterize the capacity region by maximizing the average sum-rate of users subject to rate profile constraints. To optimally solve this highly non-convex problem, we transform the original speed-constrained trajectory optimization problem into a speed-free problem that is optimally solvable via the Lagrange dual decomposition. It is rigorously proved that the optimal 1D trajectory solution follows the successive hover-and-fly (SHF) structure. Next, we consider two orthogonal multiple access (OMA) transmission schemes, i.e., frequency-division multiple access (FDMA) and time-division multiple access (TDMA). We maximize the achievable rate regions in the two cases by jointly optimizing the 1D trajectory design and wireless resource (frequency/time) allocation. It is shown that the optimal trajectory solutions still follow the SHF structure but with different hovering locations. Finally, numerical results show that the proposed optimal trajectory designs achieve considerable rate gains over other benchmark schemes, and the capacity region achieved by NOMA significantly outperforms the rate regions by FDMA and TDMA.

This paper studies the multiple unmanned aerial vehicles (UAVs) trajectory design for post-disaster cooperative video inspection and information uploading. The locations to be inspected are modeled as points of interest (PoIs) with heterogeneous resolution requirements. The three-dimensional (3D) trajectories for multiple cooperative UAVs are designed to minimize the time for successfully inspecting all the PoIs and maximize the communication time for the video uploading. An UAV inspection model is built to clarify the criteria for successful inspection, which is related to the UAV's 3D positions and velocity. The proposed UAV trajectory design involves two steps. First, the PoIs in proximity are grouped using convex optimization. Then, the multiple UAV trajectories are jointly designed by solving a multiple traveling salesman problem (MTSP). Numerical results show that the proposed design can significantly reduce the mission completion time.

In the future mobile edge networks, the Internet of things (IoT) applications will be latency-sensitive and computationally intensive. Given the resource limitation of IoT devices, mobile edge computing (MEC) servers are critical to support the efficient processing of IoT tasks. Since MEC servers attached to the ground base stations are generally deployed in fixed locations and vulnerable to physical damage, the unmanned aerial vehicle (UAV) and satellite-assisted MEC framework has been proposed to leverage the flexibility of UAVs and the broad coverage of satellites. However, efficient utilization of the UAV/satellite resources is challenging for the static ground IoT devices because of the dynamic in terms of aerial and space network topology and IoT task arrival rates. To adapt to the changing environment and utilize the interaction among multiple UAVs, we propose a multi-agent deep deterministic policy gradient (MADDPG) framework to jointly optimize the traveling routes of multi-UAVs and the offloading decision of IoT devices. To minimize the processing cost in terms of task processing latency and energy consumption of IoT devices, cooperative UAVs can help find the optimal task offloading location for each IoT device. Simulation results show the proposed algorithm based on MADDPG can averagely decrease 20% of the above processing cost compared with the benchmark approach.

Energy optimization for full-duplex wireless-powered IoT networks using rotary-wing UAV with multiple antennas

Unmanned aerial vehicle (UAV)-enabled vehicular communications in the sixth generation (6G) are characterized by line-of-sight (LoS) and dynamically varying channel conditions. However, the presence of obstacles in the LoS path leads to shadowed fading environments. In UAV-assisted cellular vehicle-to-everything (C-V2X) communication, vehicle and UAV mobility and shadowing adversely impact latency and throughput. Moreover, 6G vehicular communications comprise data-intensive applications such as augmented reality, mixed reality, virtual reality, intelligent transportation, and autonomous vehicles. Since vehicles’ sensors generate immense amount of data, the latency in processing these applications also increases, particularly when the data are not independently identically distributed (non-i.i.d.). Furthermore, when the sensors’ data are heterogeneous in size and distribution, the incoming packets demand substantial computing resources, energy efficiency at the UAV servers and intelligent mechanisms to queue the incoming packets. Due to the limited battery power and coverage range of UAV, the quality of service (QoS) requirements such as coverage rate, UAV flying time, and fairness of vehicle selection are adversely impacted. Controlling the UAV trajectory so that it serves a maximum number of vehicles while maximizing battery power usage is a potential solution to enhance QoS. This paper investigates the system performance and communication disruption between vehicles and UAV due to Doppler effect in the orthogonal time–frequency space (OTFS) modulated channel. Moreover, a low-complexity UAV trajectory prediction and vehicle selection method is proposed using federated learning, which exploits related information from past trajectories. The weighted total energy consumption of a UAV is minimized by jointly optimizing the transmission window (), transmit power and UAV trajectory considering Doppler spread. The simulation results reveal that the weighted total energy consumption of the OTFS-based system decreases up to 10% when combined with federated learning to locally process the sensor data at the vehicles and communicate the processed local models to the UAV. The weighted total energy consumption of the proposed federated learning algorithm decreases by 10–15% compared with convex optimization, heuristic, and meta-heuristic algorithms.

In this paper, we study the resource allocation and trajectory design for secure unmanned aerial vehicle (UAV)-enabled communication systems, where multiple multi-purpose UAV base stations are dispatched to provide secure communications to multiple legitimate ground users (GUs) in the existence of multiple eavesdroppers (Eves). Specifically, by leveraging orthogonal frequency division multiple access (OFDMA), active UAV base stations can communicate to their desired ground users via the assigned subcarriers while idle UAV base stations can serve as jammer simultaneously for communication security provisioning. To achieve fairness in secure communication, we maximize the average minimum secrecy rate per user by jointly optimizing the communication/jamming subcarrier allocation policy and the trajectory of UAVs, while taking into account the constraints on the minimum safety distance among multiple UAVs, the maximum cruising speed, the initial/final locations, and the existence of cylindrical no-fly zones (NFZs). The design is formulated as a mixed integer non-convex optimization problem which is generally intractable. Subsequently, a computationally-efficient iterative algorithm is proposed to obtain a suboptimal solution. Simulation results illustrate that the performance of the proposed iterative algorithm can significantly improve the average minimum secrecy rate compared to various baseline schemes.

With line-of-sight mode deployment and fast response, unmanned aerial vehicle (UAV), equipped with the cutting-edge integrated sensing and communication (ISAC) technique, is poised to deliver high-quality communication and sensing services in maritime emergency scenarios. In practice, however, the real-time transmission of ISAC signals at the UAV side cannot be realized unless the reliable wireless fronthaul link between the terrestrial base station and UAV are available. This paper proposes a multicarrier-division duplex based joint fronthaul-access scheme, where mutually orthogonal subcarrier sets are leveraged to simultaneously support four types of fronthaul/access transmissions. In order to maximize the end-to-end communication rate while maintaining an adequate sensing quality-of-service (QoS) in such a complex scheme, the UAV trajectory, subcarrier assignment and power allocation are jointly optimized. The overall optimization process is designed in two stages. As the emergency area is usually far away from the coast, the optimal initial operating position for the UAV is first found. Once the UAV passes the initial operating position, the UAV’s trajectory and resource allocation are optimized during the mission period to maximize the end-to-end communication rate under the constraint of minimum sensing QoS. Simulation results demonstrate the effectiveness of the proposed scheme in dealing with the joint fronthaul-access optimization problem in maritime ISAC networks, offering the advantages over benchmark schemes.

International audience