Laser probe microanalysis: performance assessment and applications

physica status solidi (a)Volume 62, Issue 2 p. K113-K117 Short Note A transmission electron microscopy investigation of multifilamentary and tape Nb3Sn superconductors at low temperatures C. D. Pitt, C. D. Pitt Department of Metallurgy and Materials Science, Imperial College of Science and Technology, London Search for more papers by this authorR. D. Rawlings, R. D. Rawlings Department of Metallurgy and Materials Science, Imperial College of Science and Technology, London Search for more papers by this author C. D. Pitt, C. D. Pitt Department of Metallurgy and Materials Science, Imperial College of Science and Technology, London Search for more papers by this authorR. D. Rawlings, R. D. Rawlings Department of Metallurgy and Materials Science, Imperial College of Science and Technology, London Search for more papers by this author First published: 16 December 1980 https://doi.org/10.1002/pssa.2210620248 Prince Consort Road, London SW7 2BP, England. AboutPDF ToolsRequest permissionExport citationAdd to favoritesTrack citation ShareShare Give accessShare full text accessShare full-text accessPlease review our Terms and Conditions of Use and check box below to share full-text version of article.I have read and accept the Wiley Online Library Terms and Conditions of UseShareable LinkUse the link below to share a full-text version of this article with your friends and colleagues. Learn more.Copy URL Share a linkShare onFacebookTwitterLinkedInRedditWechat Volume62, Issue216 December 1980Pages K113-K117 RelatedInformation

Journal of the American Ceramic SocietyVolume 58, Issue 3-4 p. 149-149 Creep of Polycrystalline Mullite P. A. LESSING, P. A. LESSING P. A. Lessing and R. S. Gordon are with the Department of Materials Science and Engineering, University of Utah, Salt Lake City, UT 84112; K. S. Mazdiyasni is with the United States Air Force Materials Laboratory, Wright-Patterson Air Force Base, OH 45433.Search for more papers by this authorR. S. GORDON, R. S. GORDON P. A. Lessing and R. S. Gordon are with the Department of Materials Science and Engineering, University of Utah, Salt Lake City, UT 84112; K. S. Mazdiyasni is with the United States Air Force Materials Laboratory, Wright-Patterson Air Force Base, OH 45433.Search for more papers by this authorK. S. MAZDIYASNI, K. S. MAZDIYASNI P. A. Lessing and R. S. Gordon are with the Department of Materials Science and Engineering, University of Utah, Salt Lake City, UT 84112; K. S. Mazdiyasni is with the United States Air Force Materials Laboratory, Wright-Patterson Air Force Base, OH 45433.Search for more papers by this author P. A. LESSING, P. A. LESSING P. A. Lessing and R. S. Gordon are with the Department of Materials Science and Engineering, University of Utah, Salt Lake City, UT 84112; K. S. Mazdiyasni is with the United States Air Force Materials Laboratory, Wright-Patterson Air Force Base, OH 45433.Search for more papers by this authorR. S. GORDON, R. S. GORDON P. A. Lessing and R. S. Gordon are with the Department of Materials Science and Engineering, University of Utah, Salt Lake City, UT 84112; K. S. Mazdiyasni is with the United States Air Force Materials Laboratory, Wright-Patterson Air Force Base, OH 45433.Search for more papers by this authorK. S. MAZDIYASNI, K. S. MAZDIYASNI P. A. Lessing and R. S. Gordon are with the Department of Materials Science and Engineering, University of Utah, Salt Lake City, UT 84112; K. S. Mazdiyasni is with the United States Air Force Materials Laboratory, Wright-Patterson Air Force Base, OH 45433.Search for more papers by this author First published: March 1975 https://doi.org/10.1111/j.1151-2916.1975.tb19585.xCitations: 105 Supported by the United States Atomic Energy Commission under Contract No. AT (11-1) 1591. AboutPDF ToolsRequest permissionExport citationAdd to favoritesTrack citation ShareShare Give accessShare full text accessShare full-text accessPlease review our Terms and Conditions of Use and check box below to share full-text version of article.I have read and accept the Wiley Online Library Terms and Conditions of UseShareable LinkUse the link below to share a full-text version of this article with your friends and colleagues. Learn more.Copy URL Share a linkShare onFacebookTwitterLinked InRedditWechat No abstract is available for this article.Citing Literature Volume58, Issue3-4March 1975Pages 149-149 RelatedInformation

Journal of the American Ceramic SocietyVolume 58, Issue 11-12 p. 536-536 Reply by Jeffrey D. Daw* and Patrick S. Nicholson* First published: November 1975 https://doi.org/10.1111/j.1151-2916.1975.tb18786.x † At the time this work was done, the writers were with the Department of Metallurgy and Materials Science. McMaster University, Hamilton, Ontario, Canada L8S 4L7. Jeffrey D. Daw is now with the Turbine and Generator Div., Westinghouse, Canada Lid., Hamilton, Ontario, Canada. * Member, the American Ceramic Society. AboutPDF ToolsRequest permissionExport citationAdd to favoritesTrack citation ShareShare Give accessShare full text accessShare full-text accessPlease review our Terms and Conditions of Use and check box below to share full-text version of article.I have read and accept the Wiley Online Library Terms and Conditions of UseShareable LinkUse the link below to share a full-text version of this article with your friends and colleagues. Learn more.Copy URL Share a linkShare onFacebookTwitterLinked InRedditWechat No abstract is available for this article. Volume58, Issue11-12November 1975Pages 536-536 RelatedInformation

Journal of the American Ceramic SocietyVolume 60, Issue 5-6 p. 280-280 Reply to “Further Discussion of ‘Precipitation in Partially Stabilized Zirconia’” D. L. PORTER, D. L. PORTER Member, the American Ceramic Society.Search for more papers by this authorA. H. HEUER, A. H. HEUER Member, the American Ceramic Society.Search for more papers by this author D. L. PORTER, D. L. PORTER Member, the American Ceramic Society.Search for more papers by this authorA. H. HEUER, A. H. HEUER Member, the American Ceramic Society.Search for more papers by this author First published: May 1977 https://doi.org/10.1111/j.1151-2916.1977.tb14128.xCitations: 16 Supported by the Division of Materials Research, National Science Foundation under Grant No. DMR 75-22616. The writers are with the Department of Metallurgy and Materials Science, Case Western Reserve University, Cleveland, Ohio 44106. AboutPDF ToolsRequest permissionExport citationAdd to favoritesTrack citation ShareShare Give accessShare full text accessShare full-text accessPlease review our Terms and Conditions of Use and check box below to share full-text version of article.I have read and accept the Wiley Online Library Terms and Conditions of UseShareable LinkUse the link below to share a full-text version of this article with your friends and colleagues. Learn more.Copy URL Share a linkShare onFacebookTwitterLinked InRedditWechat No abstract is available for this article.Citing Literature Volume60, Issue5-6May 1977Pages 280-280 RelatedInformation

Journal of the American Ceramic SocietyVolume 97, Issue 8 p. 2672-2673 Comment Comment on: “Flexural Strength by Fractography in Modern Brittle Materials” John J. Mecholsky Jr., Corresponding Author John J. Mecholsky Jr. Materials Science & Engineering Department, University of Florida, Gainesville, FL, 32611Author to whom correspondence should be addressed. e-mail: jmech@mse.ufl.eduSearch for more papers by this authorMatthew Strasberg, Matthew Strasberg Materials Science & Engineering Department, University of Florida, Gainesville, FL, 32611Search for more papers by this authorStephen W. Freiman, Stephen W. Freiman Freiman Consulting, Potomac, MD, 20854Search for more papers by this author John J. Mecholsky Jr., Corresponding Author John J. Mecholsky Jr. Materials Science & Engineering Department, University of Florida, Gainesville, FL, 32611Author to whom correspondence should be addressed. e-mail: jmech@mse.ufl.eduSearch for more papers by this authorMatthew Strasberg, Matthew Strasberg Materials Science & Engineering Department, University of Florida, Gainesville, FL, 32611Search for more papers by this authorStephen W. Freiman, Stephen W. Freiman Freiman Consulting, Potomac, MD, 20854Search for more papers by this author First published: 14 July 2014 https://doi.org/10.1111/jace.13105Citations: 1Read the full textAboutPDF ToolsRequest permissionExport citationAdd to favoritesTrack citation ShareShare Give accessShare full text accessShare full-text accessPlease review our Terms and Conditions of Use and check box below to share full-text version of article.I have read and accept the Wiley Online Library Terms and Conditions of UseShareable LinkUse the link below to share a full-text version of this article with your friends and colleagues. Learn more.Copy URL Share a linkShare onFacebookTwitterLinked InRedditWechat No abstract is available for this article.Citing Literature Volume97, Issue8August 2014Pages 2672-2673 RelatedInformation

Journal of the American Ceramic SocietyVolume 65, Issue 7 p. c118-c118 Reply Richard G. Hoagland, Richard G. Hoagland Department of Metallurgical Engineering, The Ohio State University, Columbus, Ohio 43210 Member, the American Ceramic Society.Search for more papers by this authorJ. D. Embury, J. D. Embury Department of Metallurgy and Materials Science, McMaster University, Hamilton, Ontario L8S 4L7, CanadaSearch for more papers by this author Richard G. Hoagland, Richard G. Hoagland Department of Metallurgical Engineering, The Ohio State University, Columbus, Ohio 43210 Member, the American Ceramic Society.Search for more papers by this authorJ. D. Embury, J. D. Embury Department of Metallurgy and Materials Science, McMaster University, Hamilton, Ontario L8S 4L7, CanadaSearch for more papers by this author First published: July 1982 https://doi.org/10.1111/j.1151-2916.1982.tb10484.x Contributed editor—W. J. Smothers AboutPDF ToolsRequest permissionExport citationAdd to favoritesTrack citation ShareShare Give accessShare full text accessShare full-text accessPlease review our Terms and Conditions of Use and check box below to share full-text version of article.I have read and accept the Wiley Online Library Terms and Conditions of UseShareable LinkUse the link below to share a full-text version of this article with your friends and colleagues. Learn more.Copy URL Share a linkShare onFacebookTwitterLinked InRedditWechat No abstract is available for this article. Volume65, Issue7July 1982Pages c118-c118 RelatedInformation

AIChE JournalVolume 65, Issue 10 e16708 PERSPECTIVE Decomposition of control and optimization problems by network structure: Concepts, methods, and inspirations from biology Prodromos Daoutidis, Corresponding Author Prodromos Daoutidis daout001@umn.edu Department of Chemical Engineering and Materials Science, University of Minnesota, Minneapolis, Minnesota Correspondence Prodromos Daoutidis, Department of Chemical Engineering and Materials Science, University of Minnesota, Minneapolis, MN 55455. Email: daout001@umn.eduSearch for more papers by this authorWentao Tang, Wentao Tang Department of Chemical Engineering and Materials Science, University of Minnesota, Minneapolis, MinnesotaSearch for more papers by this authorAndrew Allman, Andrew Allman Department of Chemical Engineering and Materials Science, University of Minnesota, Minneapolis, MinnesotaSearch for more papers by this author Prodromos Daoutidis, Corresponding Author Prodromos Daoutidis daout001@umn.edu Department of Chemical Engineering and Materials Science, University of Minnesota, Minneapolis, Minnesota Correspondence Prodromos Daoutidis, Department of Chemical Engineering and Materials Science, University of Minnesota, Minneapolis, MN 55455. Email: daout001@umn.eduSearch for more papers by this authorWentao Tang, Wentao Tang Department of Chemical Engineering and Materials Science, University of Minnesota, Minneapolis, MinnesotaSearch for more papers by this authorAndrew Allman, Andrew Allman Department of Chemical Engineering and Materials Science, University of Minnesota, Minneapolis, MinnesotaSearch for more papers by this author First published: 27 June 2019 https://doi.org/10.1002/aic.16708Citations: 14 Funding information: University of Minnesota; National Science Foundation Read the full textAboutPDF ToolsRequest permissionExport citationAdd to favoritesTrack citation ShareShare Give accessShare full text accessShare full-text accessPlease review our Terms and Conditions of Use and check box below to share full-text version of article.I have read and accept the Wiley Online Library Terms and Conditions of UseShareable LinkUse the link below to share a full-text version of this article with your friends and colleagues. Learn more.Copy URL Share a linkShare onFacebookTwitterLinked InRedditWechat Citing Literature Volume65, Issue10October 2019e16708 RelatedInformation

The DoITPoMS (Dissemination of IT for the promotion of Materials Science) project was set up in 2000, as a joint venture involving the Department of Materials Science and Metallurgy at the University of Cambridge, and a number of other UK partner institutions. Over two decades, the project has developed open online educational resources in Materials Science and promoted their use. These resources include background information, digital video clips and photomicrographs, but the primary resource is a library of teaching and learning packages (TLPs), which are generally interactive and seek to make maximum use of the online medium to provide richer content than would be possible in traditional printed resources, which were the standard at the outset of the project. In addition to describing development of these resources, this chapter assesses how changes in technology and use patterns over 20 years have had an impact on their sustainability.

Apparatus constructed in the Department of Metallurgy and Materials Science, University of Cambridge, has enabled the hot hardness of the individual steel phases, ferrite, austenite, cementite, pearlite, Type I MnS, Mn–MnS eutectic, and silicates to be measured in situ with a high degree of accuracy. The work was undertaken in the context of studies of the deformation behaviour of non-metallic inclusions in steel, where the relative yield behaviour of inclusions and matrix is clearly a significant factor. Because of their wider interest the hot hardness results are presented separately. The high-temperature hardness of pearlite, of significance in its behaviour in ‘warm’ working, has been explained in terms of the hardness of its constituent phases.

Biotechnology and BioengineeringVolume 67, Issue 6 p. 720-725 Communication to the Editor Formulation of structured growth models A. G. Fredrickson, A. G. Fredrickson Department of Chemical Engineering and Materials Science, University of Minnesota, Minneapolis, Minnesota 55455Search for more papers by this author A. G. Fredrickson, A. G. Fredrickson Department of Chemical Engineering and Materials Science, University of Minnesota, Minneapolis, Minnesota 55455Search for more papers by this author First published: 26 March 2000 https://doi.org/10.1002/(SICI)1097-0290(20000320)67:6<720::AID-BIT10>3.0.CO;2-ICitations: 2AboutPDF ToolsRequest permissionExport citationAdd to favoritesTrack citation ShareShare Give accessShare full text accessShare full-text accessPlease review our Terms and Conditions of Use and check box below to share full-text version of article.I have read and accept the Wiley Online Library Terms and Conditions of UseShareable LinkUse the link below to share a full-text version of this article with your friends and colleagues. Learn more.Copy URL Share a linkShare onFacebookTwitterLinkedInRedditWechat Citing Literature Volume67, Issue6Special Issue: Special 40th Anniversary Issue20 March 2000Pages 720-725 RelatedInformation

Imposing a temperature gradient when transient liquid phase (TLP) diffusion bonding is the basis of a new bonding method which has recently been developed in the Department of Materials Science and Metallurgy, University of Cambridge (UK Patent 9709167.2). The use of temperature gradient TLP diffusion bonding results in joints with excellent reliability and also shear strengths as high as those of the parent material (e.g. aluminium-based alloys and composites). Another feature of this new method is that diffusion of solute in the solid phase is not necessary for solidification to take place and therefore bonding times are significantly shorter than those in conventional TLP diffusion bonding (when there is no imposed temperature gradient across the liquid phase). A mathematical model is proposed in this paper which is capable of predicting bonding times and bond line displacements when TLP diffusion bonding under a temperature gradient. The bond line displacement and bonding time predicted by the model for an ideal Al-Cu binary system are compared with experimental results obtained using pure aluminium and copper. The theoretical values predicted by the model are in agreement with the experimental results.

Journal Article Microscopy and Spectroscopy of Catalysts and Energy Storage Materials Get access S Prabhudev, S Prabhudev Department of Materials Science and Engineering, McMaster University, Hamilton, ON, Canada Search for other works by this author on: Oxford Academic Google Scholar S Stambula, S Stambula Department of Materials Science and Engineering, McMaster University, Hamilton, ON, Canada Search for other works by this author on: Oxford Academic Google Scholar L Chinchilla, L Chinchilla Department of Materials Science and Engineering, McMaster University, Hamilton, ON, Canada Search for other works by this author on: Oxford Academic Google Scholar C Chiang, C Chiang Department of Materials Science and Engineering, McMaster University, Hamilton, ON, Canada Search for other works by this author on: Oxford Academic Google Scholar M Chatzidakis, M Chatzidakis Department of Materials Science and Engineering, McMaster University, Hamilton, ON, Canada Search for other works by this author on: Oxford Academic Google Scholar H Liu, H Liu Department of Materials Science and Engineering, McMaster University, Hamilton, ON, Canada Search for other works by this author on: Oxford Academic Google Scholar D Rossouw, D Rossouw Department of Materials Science and Engineering, McMaster University, Hamilton, ON, Canada Search for other works by this author on: Oxford Academic Google Scholar C Wiktor, C Wiktor Department of Materials Science and Engineering, McMaster University, Hamilton, ON, Canada Search for other works by this author on: Oxford Academic Google Scholar M Bugnet, M Bugnet Department of Materials Science and Engineering, McMaster University, Hamilton, ON, CanadaNow at CNRS-INSA Lyon, UMR 5510, Bât. B. Pascal, F-69621 Villeurbanne Cedex, France Search for other works by this author on: Oxford Academic Google Scholar GA Botton GA Botton Department of Materials Science and Engineering, McMaster University, Hamilton, ON, Canada Search for other works by this author on: Oxford Academic Google Scholar Microscopy and Microanalysis, Volume 22, Issue S3, 1 July 2016, Pages 854–855, https://doi.org/10.1017/S1431927616005110 Published: 25 July 2016

Journal of the American Ceramic SocietyVolume 53, Issue 1 p. 51-52 Solubility of Aluminum in Lead Zirconate Titanate R. B. ATKIN, R. B. ATKINSearch for more papers by this authorR. M. FULRATH, R. M. FULRATHSearch for more papers by this author R. B. ATKIN, R. B. ATKINSearch for more papers by this authorR. M. FULRATH, R. M. FULRATHSearch for more papers by this author First published: January 1970 https://doi.org/10.1111/j.1151-2916.1970.tb11999.xCitations: 17 Work performed under the auspices of the United States Atomic Energy Commission. The writers are with the Inorganic Materials Research Division, Lawrence Radiation Laboratory, and Department of Materials Science and Engineering, College of Engineering, University of California, Berkeley, Calif. 94720. AboutPDF ToolsRequest permissionExport citationAdd to favoritesTrack citation ShareShare Give accessShare full text accessShare full-text accessPlease review our Terms and Conditions of Use and check box below to share full-text version of article.I have read and accept the Wiley Online Library Terms and Conditions of UseShareable LinkUse the link below to share a full-text version of this article with your friends and colleagues. Learn more.Copy URL Share a linkShare onFacebookTwitterLinked InRedditWechat No abstract is available for this article.Citing Literature Volume53, Issue1January 1970Pages 51-52 RelatedInformation

1 Department of Material Science and Engineering, Yonsei University, Seoul, Republic of Korea 2 Environment-Energy Ceramics, Korea Institute of Ceramic Engineering, Seoul, Republic of Korea 3 Electronic Materials Center, Korea Institute of Science and Technology, Seoul, Republic of Korea 4Department of Material Science and Engineering, Seoul National University, Seoul, Republic of Korea 5 Department of Mechanical Engineering and Materials Science, University of Pittsburgh, Pittsburgh, PA, USA

A research program to experimentally determine ternary Ni-base alloy constitution is being carried out in the Department of Metallurgy and Materials Science at Imperial College. As part of this program, an interaction graphics computer program is being developed for the generation of publication-ready isothermal sections of ternary phase diagrams.