Learning Target Predictive Function without Target Labels

Domain Adaptation (DA) methods are usually carried out by means of simply reducing the marginal distribution differences between the source and target domains, and subsequently using the resultant trained classifier, namely source classifier, for use in the target domain. However, in many cases, the true predictive distributions of the source and target domains can be vastly different especially when their class distributions are skewed, causing the issues of sample selection bias in DA. Hence, DA methods which leverage the source labeled data may suffer from poor generalization in the target domain, resulting in negative transfer. In addition, we observed that many DA methods use either a source classifier or a linear combination of source classifiers with a fixed weighting for predicting the target unlabeled data. Essentially, the labels of the target unlabeled data are spanned by the prediction of these source classifiers. Motivated by these observations, in this paper, we propose to construct many source classifiers of diverse biases and learn the weight for each source classifier by directly minimizing the structural risk defined on the target unlabeled data so as to heal the possible sample selection bias. Since the weights are learned by maximizing the margin of separation between opposite classes on the target unlabeled data, the proposed method is established here as Maximal Margin Target Label Learning (MMTLL), which is in a form of Multiple Kernel Learning problem with many label kernels. Extensive experimental studies of MMTLL against several state-of-the-art methods on the Sentiment and Newsgroups datasets with various imbalanced class settings showed that MMTLL exhibited robust accuracies on all the settings considered and was resilient to negative transfer, in contrast to other counterpart methods which suffered significantly in prediction accuracy.

Fault detection using the domain adaptation technique is one of the more promising methods of solving the domain shift problem, and has therefore been intensively investigated in recent years. However, the domain adaptation method still has elements of impracticality: firstly, domain-specific decision boundaries are not taken into consideration, which often results in poor performance near the class boundary; and secondly, information on the source domain needs to be exploited with priority over information on the target domain, as the source domain can provide a rich dataset. Thus, the real-world implementations of this approach are still scarce. In order to address these issues, a novel fault detection approach based on one-sided domain adaptation for real-world railway door systems is proposed. An anomaly detector created using label-rich source domain data is used to generate distinctive source latent features, and the target domain features are then aligned toward the source latent features in a one-sided way. The performance and sensitivity analyses show that the proposed method is more accurate than alternative methods, with an F1 score of 97.9%, and is the most robust against variation in the input features. The proposed method also bridges the gap between theoretical domain adaptation research and tangible industrial applications. Furthermore, the proposed approach can be applied to conventional railway components and various electro-mechanical actuators. This is because the motor current signals used in this study are primarily obtained from the controller or motor drive, which eliminates the need for extra sensors.

In this paper, we propose a new unsupervised domain adaptation method for document classification. We address the problem of domain adaptation for document classification where the source and target domains do not differ significantly and there is no labeled data in the target domain. In this case, we can use conventional semi-supervised learning. Thus, we use the naive Bayes-based expectation-maximization method (NBEM) which is very effective for document classification. However, NBEM does not utilize the difference between a source domain and a target domain. We combine NBEM with the feature weighted method for domain adaptation, referred to as “self-training feature weight” (STFW). Our proposed method alternately uses NBEM and STFW to gradually improve document classification precision for a target domain. This method significantly outperforms the conventional unsupervised methods for domain adaptation.

Conventional machine learning relies on two presumptions: (1) the training and testing datasets follow the same independent distribution, and (2) an adequate quantity of samples is essential for achieving optimal model performance during training. Nevertheless, meeting these two assumptions can be challenging in real-world scenarios. Domain adaptation (DA) is a subfield of transfer learning that focuses on reducing the distribution difference between the source domain (Ds) and target domain (Dt) and subsequently applying the knowledge gained from the Ds task to the Dt task. The majority of current DA methods aim to achieve domain invariance by aligning the marginal probability distributions of the Ds. and Dt. Recent studies have pointed out that aligning marginal probability distributions alone is not sufficient and that alignment of conditional probability distributions is equally important for knowledge migration. Nonetheless, unsupervised DA presents a more significant difficulty in aligning the conditional probability distributions because of the unavailability of labels for the Dt. In response to this issue, there have been several proposed methods by researchers, including pseudo-labeling, which offer novel solutions to tackle the problem. In this paper, we systematically analyze various pseudo-labeling algorithms and their applications in unsupervised DA. First , we summarize the pseudo-label generation methods based on the single and multiple classifiers and actions taken to deal with the problem of imbalanced samples. Second, we investigate the application of pseudo-labeling in category feature alignment and improving feature discrimination. Finally, we point out the challenges and trends of pseudo-labeling algorithms. As far as we know, this article is the initial review of pseudo-labeling techniques for unsupervised DA.

Adversarial discriminative domain adaptation (ADDA) is an efficient framework for unsupervised domain adaptation in image classification, where the source and target domains are assumed to have the same classes, but no labels are available for the target domain. While ADDA has already achieved better training efficiency and competitive accuracy on image classification in comparison to other adversarial based methods, we investigate whether we can improve its performance with a new framework and new loss formulations. Following the framework of semi-supervised GANs, we first extend the discriminator output over the source classes, in order to model the joint distribution over domain and task. We thus leverage on the distribution over the source encoder posteriors (which is fixed during adversarial training) and propose maximum mean discrepancy (MMD) and reconstruction-based loss functions for aligning the target encoder distribution to the source domain. We compare and provide a comprehensive analysis of how our framework and loss formulations extend over simple multi-class extensions of ADDA and other discriminative variants of semi-supervised GANs. In addition, we introduce various forms of regularization for stabilizing training, including treating the discriminator as a denoising autoencoder and regularizing the target encoder with source examples to reduce overfitting under a contraction mapping (i.e., when the target per-class distributions are contracting during alignment with the source). Finally, we validate our framework on standard datasets like MNIST, USPS, SVHN, MNIST-M and Office-31. We additionally examine how the proposed framework benefits recognition problems based on sensing modalities that lack training data. This is realized by introducing and evaluating on a neuromorphic vision sensing (NVS) sign language recognition dataset, where the source domain constitutes emulated neuromorphic spike events converted from conventional pixel-based video and the target domain is experimental (real) spike events from an NVS camera. Our results on all datasets show that our proposal is both simple and efficient, as it competes or outperforms the state-of-the-art in unsupervised domain adaptation, such as DIFA and MCDDA, whilst offering lower complexity than other recent adversarial methods.

Nearly every real-world deployment of machine learning models suffers from some form of shift in data distributions in relation to the data encountered in production. This aspect is particularly pronounced when dealing with streaming data or in dynamic settings (e.g. changes in data sources, behaviour and the environment). As a result, the performance of the models degrades during deployment. In order to account for these contextual changes, domain adaptation techniques have been designed for scenarios where the aim is to learn a model from a source data distribution, which can perform well on a different, but related target data distribution.In this paper we introduce a variational autoencoder-based multi-modal approach for the task of domain adaptation, that can be trained on a large amount of labelled data from the source domain, coupled with a comparably small amount of labelled data from the target domain. We demonstrate our approach in the context of human activity recognition using various IoT sensing modalities and report superior results when benchmarking against the effective mSDA method for domain adaptation.

A unified framework for visual domain adaptation with covariance matching

The use of Convolutional Neural Networks (CNNs) to solve Domain Adaptation (DA) image classification problems in the context of remote sensing has proven to provide good results but at high computational cost. To avoid this problem, a deep learning network for DA in remote sensing hyperspectral images called TCANet is proposed. As a standard CNN, TCANet consists of several stages built based on convolutional filters that operate on patches of the hyperspectral image. Unlike the former, the coefficients of the filter are obtained through Transfer Component Analysis (TCA). This approach has two advantages: firstly, TCANet does not require training based on backpropagation, since TCA is itself a learning method that obtains the filter coefficients directly from the input data. Second, DA is performed on the fly since TCA, in addition to performing dimensional reduction, obtains components that minimize the difference in distributions of data in the different domains corresponding to the source and target images. To build an operating scheme, TCANet includes an initial stage that exploits the spatial information by providing patches around each sample as input data to the network. An output stage performing feature extraction that introduces sufficient invariance and robustness in the final features is also included. Since TCA is sensitive to normalization, to reduce the difference between source and target domains, a previous unsupervised domain shift minimization algorithm consisting of applying conditional correlation alignment (CCA) is conditionally applied. The results of a classification scheme based on CCA and TCANet show that the DA technique proposed outperforms other more complex DA techniques.

In real-world hyperspectral image (HSI) classification, the limited annotated examples usually lead to the insufficiently trained classifier, which further generates low classification accuracy. To overcome this challenge, Domain Adaptation (DA) methods have been developed to transfer learnable knowledge from the external HSIs with sufficient labeled examples ( <italic xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">i.e</i> ., the source domain) to the interested HSI with scarce labeled examples ( <italic xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">i.e</i> ., the target domain). Conventional DA approaches often pseudo-label the examples with high classification confidence and then incorporate them in the training process. However, due to the significant domain gap, relying solely on the confident examples may not be adequate to achieve satisfactory performance. Therefore, this paper proposes an Interactive Easy-to-Hard Domain Adaptation method (IEH-DA) to arrange the adaptation process so that the “easy” examples are adapted ahead of the “hard” ones. In an early stage, the easy examples with high pseudo-labeling confidence are selected for the adversarial learning based DA. In a later stage, the “hard” examples with high informativity are further selected, and they are interactively labeled by human expert to provide accurate supervision information for adaptation. As a result, the examples in target domain are used in an easy-to-hard way, which forms a curriculum sequence for orderly model training. Extensive experiments conducted on typical public datasets demonstrate that IEH-DA outperforms other state-of-the-art DA methods for HSI classification.

Domain adaptation has achieved promising results in many areas, such as image classification and object recognition. Although a lot of algorithms have been proposed to solve the task with different domain distributions, it remains a challenge for multi-source unsupervised domain adaptation. In addition, most of the existing algorithms learn a classifier on the source domain and predict the labels for the target data, which indicates that only the knowledge derived from the hyperplane is transferred to the target domain and the structure information is ignored. In light of this, we propose a novel algorithm for multi-source unsupervised domain adaptation. Generally speaking, we aim to preserve the whole structure from source domains and transfer it to serve the task on the target domain. The source and target data are put together for clustering, which simultaneously explores the structures of the source and target domains. The structure-preserved information from source domain further guides the clustering process on the target domain. Extensive experiments on two widely used databases on object recognition and face identification show the substantial improvement of our proposed approach over several state-of-the-art methods. Especially, our algorithm can take use of multi-source domains and achieve robust and better performance compared with the single source domain adaptation methods.

Multisource unsupervised domain adaptation (MUDA) is an important and challenging topic for target classification with the assistance of labeled data in source domains. When we have several labeled source domains, it is difficult to map all source domains and target domain into a common feature space for classifying the targets well. In this article, a new progressive multisource domain adaptation network (PMSDAN) is proposed to further improve the classification performance. PMSDAN mainly consists of two steps for distribution alignment. First, the multiple source domains are integrated as one auxiliary domain to match the distribution with the target domain. By doing this, we can generally reduce the distribution discrepancy between each source and target domains, as well as the discrepancy between different source domains. It can efficiently explore useful knowledge from the integrated source domain. Second, to mine assistance knowledge from each source domain as much as possible, the distribution of the target domain is separately aligned with that of each source domain. A weighted fusion method is employed to combine the multiple classification results for making the final decision. In the optimization of domain adaption, weighted hybrid maximum mean discrepancy (WHMMD) is proposed, and it considers both the interclass and intraclass discrepancies. The effectiveness of the proposed PMSDAN is demonstrated in the experiments comparing with some state-of-the-art methods.

This paper addresses the problem of land-cover map updating by classification of multitemporal remote-sensing images in the context of domain adaptation (DA). The basic assumptions behind the proposed approach are twofold. The first one is that training data (ground reference information) are available for one of the considered multitemporal acquisitions (source domain) whereas they are not for the other (target domain). The second one is that multitemporal acquisitions (i.e., target and source domains) may be characterized by different sets of classes. Unlike other approaches available in the literature, the proposed DA Bayesian classifier based on maximum a posteriori decision rule (DA-MAP) automatically identifies whether there exist differences between the set of classes in the target and source domains and properly handles these differences in the updating process. The proposed method was tested in different scenarios of increasing complexity related to multitemporal image classification. Experimental results on medium-resolution and very high resolution multitemporal remote-sensing data sets confirm the effectiveness and the reliability of the proposed DA-MAP classifier.

Easy Domain Adaptation for cross-subject multi-view emotion recognition

Unsupervised domain adaptation aims to transfer knowledge from labeled source domain to unlabeled target domain. Recently, multisource domain adaptation (MDA) has begun to attract attention. Its performance should go beyond simply mixing all source domains together for knowledge transfer. In this article, we propose a novel prototype-based method for MDA. Specifically, for solving the problem that the target domain has no label, we use the prototype to transfer the semantic category information from source domains to target domain. First, a feature extraction network is applied to both source and target domains to obtain the extracted features from which the domain-invariant features and domain-specific features will be disentangled. Then, based on these two kinds of features, the named inherent class prototypes and domain prototypes are estimated, respectively. Then a prototype mapping to the extracted feature space is learned in the feature reconstruction process. Thus, the class prototypes for all source and target domains can be constructed in the extracted feature space based on the previous domain prototypes and inherent class prototypes. By forcing the extracted features are close to the corresponding class prototypes for all domains, the feature extraction network is progressively adjusted. In the end, the inherent class prototypes are used as a classifier in the target domain. Our contribution is that through the inherent class prototypes and domain prototypes, the semantic category information from source domains is transformed into the target domain by constructing the corresponding class prototypes. In our method, all source and target domains are aligned twice at the feature level for better domain-invariant features and more closer features to the class prototypes, respectively. Several experiments on public data sets also prove the effectiveness of our method.

In many real-world applications, the domain of model learning (referred as source domain) is usually inconsistent with or even different from the domain of testing (referred as target domain), which makes the learnt model degenerate in target domain, i.e., the test domain. To alleviate the discrepancy between source and target domains, we propose a domain adaptation method, named as Bi-shifting Auto-Encoder network (BAE). The proposed BAE attempts to shift source domain samples to target domain, and also shift the target domain samples to source domain. The non-linear transformation of BAE ensures the feasibility of shifting between domains, and the distribution consistency between the shifted domain and the desirable domain is constrained by sparse reconstruction between them. As a result, the shifted source domain is supervised and follows similar distribution as target domain. Therefore, any supervised method can be applied on the shifted source domain to train a classifier for classification in target domain. The proposed method is evaluated on three domain adaptation scenarios of face recognition, i.e., domain adaptation across view angle, ethnicity, and imaging sensor, and the promising results demonstrate that our proposed BAE can shift samples between domains and thus effectively deal with the domain discrepancy.