Least square support vector machine-based variational mode decomposition: a new hybrid model for daily river water temperature modeling.

The variational mode decomposition (VMD) method for signal decomposition is severely affected by the number of components of the VMD method. In order to determine the decomposition modal number, K, in the VMD method, a new center frequency method of the multi-threshold is proposed in this paper. Then, an improved VMD (MTCFVMD) algorithm based on the center frequency method of the multi-threshold is obtained to decompose the vibration signal into a series of intrinsic modal functions (IMFs). The Hilbert transformation is used to calculate the envelope signal of each IMF component, and the maximum frequency value of the power spectral density is obtained in order to effectively and accurately extract the fault characteristic frequency and realize the fault diagnosis. The rolling element vibration data of the motor bearing is used to test the effectiveness of proposed methods. The experiment results show that the center frequency method of the multi-threshold can effectively determine the number, K, of decomposed modes. The proposed fault diagnosis method based on MTCFVMD and Hilbert transformation can effectively and accurately extract the fault characteristic frequency, rotation frequency, and frequency doubling, and can obtain higher diagnostic accuracy.

This paper proposes a novel method to improve the variational mode decomposition (VMD) method and to automatically acquire the sensitive intrinsic mode function (IMF). First, since fault signals are impulsive and periodic, a weighted autocorrelative function maximum (AFM) indicator is constructed based on the Gini index and autocorrelation function to serve as the optimization objective function. The mode number K and the penalty parameter α of VMD are automatically obtained through an optimal parameter searching process underpinned by the improved particle swarm optimization (PSO) algorithm with a variety of inertia weights. This improvement solves one of the major drawbacks of the conventional VMD method, that is, the need to manually set parameters. Then, an optimal IMF automatic selecting process is performed for single-failure faults and compound faults, according to the principles of the maximum weighted AFM indicator and maximum spectrum peak ratio (SPR), respectively. The sensitive IMFs are then subjected to an envelope demodulation analysis to obtain the fault characteristic frequency. The results of simulations and experiments show that the proposed method can effectively identify fault characteristics early, especially compound faults, demonstrating great potential for real-world applications.

A motor bearing system is a nonlinear dynamics system with nonlinear support stiffness. It is an asymmetry system, which plays an extremely important role in rotating machinery. In this paper, a center frequency method of double thresholds is proposed to improve the variational mode decomposition (VMD) method, then an adaptive VMD (called DTCFVMD) method is obtained to extract the fault feature. In the DTCFVMD method, a center frequency method of double thresholds is a symmetry method, which is used to determine the decomposed mode number of VMD according to the power spectrum of the signal. The proposed DTCFVMD method is used to decompose the nonlinear and non-stationary vibration signals of motor bearing in order to obtain a series of intrinsic mode functions (IMFs) under different scales. Then, the Hilbert transform is used to analyze the envelope of each mode component and calculate the power spectrum of each mode component. Finally, the power spectrum is used to extract the fault feature frequency for determining the fault type of the motor bearing. To test and verify the effectiveness of the DTCFVMD method, the actual fault vibration signal of the motor bearing is selected in here. The experimental results show that the center frequency method of double thresholds can effectively determine the mode number of the VMD method, and the proposed DTCFVMD method can accurately extract the clear time frequency characteristics of each mode component, and obtain the fault characteristics of characteristics; frequency, rotating frequency, and frequency doubling and so on.

The variational mode decomposition (VMD) method has been widely applied in the field of mechanical fault diagnosis as an excellent non-recursive signal processing tool. The performance of VMD depends on its inherent prior parameters. Searching for the key parameters of VMD using intelligent optimization algorithms poses challenges for the internal essence and fitness function selection of intelligent optimization algorithm. Moreover, the computational complexity of optimization is high. Meanwhile, such methods are not competitive in evaluating orthogonality between intrinsic mode functions and the reconstruction error of the signal as a joint indictor for the termination of decomposition. Therefore, this paper proposes a new auto-regulative sparse variational mode decomposition method (ASparse–VMD) to achieve accurate feature extraction. The regularization term of the VMD handles sparsification by constructing an L2-norm with a damping coefficient ε, and mode number K is set adaptively in a recursive manner to ensure appropriateness. The penalty parameter α is dynamically selected according to the number of modes and sampling frequency. The update step τ of the VMD algorithm is set using the signal-to-noise ratio to ensure the singleness and orthogonality of the modal components and suppress mode aliasing. The experimental results of the simulation signal and measured signal demonstrate the effectiveness of the proposed strategies for improving the inherent defects of VMD. Extensive comparisons with state-of-the-art methods show that the proposed algorithm is more effective and practical for hybrid feature extraction in mechanical faults.

Aiming at monitoring of gearbox faults, a gear fault feature extraction method based on variational mode decomposition (VMD) and multi-scale discrete entropy (MDE) is proposed in this paper. Firstly, the gear fault signal is decomposed into a series of intrinsic modal function (IMF) by VMD with selected parameters; Secondly, the decomposed IMF are extracted by MDE feature extraction method to form a feature sample set; Finally, the least square support vector machine (LSSVM) is used to classify the data set after feature extraction. The experiment results show that the proposed method owns the higher fault diagnosis accuracy than the traditional multi-scale entropy methods.

A hybrid methodology for bearing fault and severity analysis using param, eter-optimized variational mode decomposition (VMD) and deep learning (DL) algorithms is presented in this study. Different localized defects are artificially seeded at the contacting surfaces of a self-aligning bearings, and vibration data is generated (Case study II) under various radial-load and speed conditions for DL algorithm development. This data is pre-processed using the parameter-optimized VMD, where the intrinsic mode function with the highest kurtosis is processed using a deep learning (DL) algorithm. Particle swarm optimization is used for optimizing two VMD parameters. Further, seven different DL algorithms are implemented to classify various fault severity of rolling-element bearings. These algorithms are validated against the standard repository dataset of Case Western Reserve University (Case study I). The reliability of these algorithms is also tested using the generated dataset (Case study II) and the results show that 1D-CNN, WaveNet and gated recurrent unit have outperformed all other algorithms by achieving accuracies of 99.65%, 97.05% and 97.33%, respectively.

This article adopts three soft computing techniques including support vector machine (SVM), least square support vector machine (LSSVM) and relevance vector machine (RVM) for prediction of status of epimetemorphic rock slope. The input variables of SVM, LSSVM and RVM are bulk density, height, inclination, cohesion and internal friction angle. There are 53 datasets which have been used to develop the SVM, LSSVM and RVM models. The developed SVM, LSSVM and RVM give equations for prediction of status of epimetemorphic rock slope. The performance of SVM, LSSVM and RVM is 100%. A comparative study has been presented between the developed SVM, LSSVM and RVM. The results confirm that the developed SVM, LSSVM and RVM are effective tools for prediction of status of epimetemorphic rock slope.

Recently, magnetocardiography (MCG) has attracted increasing attention as a non-invasive and non-contact technique for detecting electrocardioelectric functions. However, the severe background noise makes it difficult to extract information. Variational Mode Decomposition (VMD), which is an entirely non-recursive model, is used to decompose the non-stationary signal into the intrinsic mode functions (IMFs). Traditional VMD algorithms cannot control the bandwidth of each IMF, whose quadratic penalty lacks adaptivity. As a result, baseline drift noise is still present or medical information is lost. In this paper, to overcome the unadaptable quadratic penalty problem, an improved VMD model via correlation coefficient and new update formulas are proposed to decompose MCG signals. To improve the denoising precision, this algorithm is combined with the interval threshold algorithm. First, the correlation coefficient is calculated, to determine quadratic penalty, in order to extract the first IMF made up of baseline drift. Then, the new update formulas derived from the variance that describes the noise level are used, to perform decomposition on the rest signal. Finally, the Interval thresholding algorithm is performed on each IMF. Theoretical analysis and experimental results show that this algorithm can effectively improve the output signal-to-noise ratio and has superior performance.

The research about online monitoring and leakage automatic location of water distribution networks (WDN) has a wide range of applications that include water resource protection, monitoring, and allocation. Variational mode decomposition (VMD) and cross-correlation (CC) based leakage location is a popular and effective method in WDN. However, the value of K intrinsic mode functions (IMFs) based on VMD decomposition needs to be determined artificially, which affects the separation effect of signal frequency band characteristics directly. Hence, this work proposes an adaptive method to determine the parameter K of leakage vibration signal’s IMFs, which will be applied to automatic leakage location in WDN. Firstly, the number of saddle points in the frequency domain envelope of the sampled signal in different step sizes is calculated. The parameter K is determined according to the curvature change of the number of saddle points and the sampled signal. Finally, the selective IMFs are reconstituted into a new signal, which can determine a leak position using CC based time-delay estimation (TDE). To verify the effectiveness of the proposed algorithm, the different methods based on EMD and Fast ICA are compared. The experimental results demonstrate that the proposed parameter K value adaptive VMD (KVA-VMD) decomposition method is more suitable for leakage location in WDN.

An optimized VMD method and its applications in bearing fault diagnosis

This paper proposes a study on gearbox fault feature extraction of wind turbine under variable speed condition using improved adaptive variational mode decomposition (VMD). Frequent changes in wind speed and critical noise interference make the vibration signal exhibit non-stationary characteristics. Although computational order tracking can transform non-stationary signals in the time domain into stationary angular signals, and then extract fault features from order spectrum obtained by FFT, the obtained order spectrum is liable to be polluted by noise or to appear order aliasing. To avoid order aliasing and eliminate noise interference, the original non-stationary signal is firstly processed using the improved adaptive VMD method called adaptive differential evolution – VMD (ADE-VMD). ADE-VMD can not only utilise the advantages of traditional VMD but also adaptively select narrow-band intrinsic mode function (NBIMF) to construct the reconstructed signal with less noise and without order aliasing. In the experiment, we compared the ADE-VMD method with other VMD methods such as GA-VMD, PSO-VMD and DE-VMD, and the results showed that ADE-VMD has excellent adaptive processing ability, and its convergence and optimisation speed are more remarkable. ADE-VMD can effectively filter the noise inference and avoid the order aliasing, so it is well suitable for fault feature extraction under variable speed.

Variational mode decomposition has been widely applied to machinery fault diagnosis during these years. However, it remains difficult to set proper hyperparameters for the variational mode decomposition, including number of decomposed modes, initial center frequencies, and balance parameter. Moreover, the low efficiency of the existing variational mode decomposition methods hinders their applications to practical diagnostic task. This article proposes an adaptive and efficient variational mode decomposition method after thoroughly investigating its convergence property characteristic. A convergent tendency phenomenon is discovered and is explained mathematically for the first time. Motivated by the convergent tendency phenomenon, the proposed method rapidly and adaptively determines the number and the optimal initial center frequencies of signal latent modes with the guidance of the convergent tendencies of the initial center frequencies changing from small to large. In the proposed method, the number of decomposed modes and initial center frequencies are not hyperparameters that require to be set in advance any more, but are parameters learned from the analyzed signals. The determined parameters enable efficient extraction of the main latent modes contained in the analyzed signals. Therefore, the proposed variational mode decomposition method represents a major improvement in parameter adaption and decomposition efficiency over the existing variational mode decomposition methods. In the application for bearing fault diagnosis, the faulty modes are selected adaptively and the corresponding balance parameters are further optimized efficiently. Two experimental cases validate the proposed method and its superiority over the existing variational mode decomposition methods and the classical fast spectral kurtosis in bearing fault diagnosis.

With the in-depth implementation of China’s “National Strategy for Building a Strong Transportation Network,” the scale of expressway construction has continued to expand. As a result, the number of high-fill and deep-cut subgrade projects under complex geological conditions has increased significantly, leading to a surge in landslide-related issues. Consequently, accurate prediction of slope displacement is of critical importance for early warning and prevention of landslide disasters. This study proposes a hybrid prediction model, VMD-MPA-LSSVM-LSTM (VMLL), which integrates Variational Mode Decomposition (VMD), Marine Predators Algorithm (MPA), Least Squares Support Vector Machine (LSSVM), and Long Short-Term Memory (LSTM) networks. Using monitoring data from the high-fill embankment slope at Hongtuyao as the research subject, the VMLL model is employed to predict slope displacement based on small-sample data. The objective is to provide a more accurate method for early warning of slope displacement. Firstly, the original monitoring data are decomposed into trend displacement components and fluctuation displacement components using Variational Mode Decomposition (VMD). Subsequently, the trend component and the fluctuation component are predicted using Least Squares Support Vector Machine (LSSVM) and Long Short-Term Memory (LSTM) networks, respectively. Finally, the Marine Predators Algorithm (MPA) is employed to optimize the hyperparameters of the predictive models. Based on this framework, a VMLL-based slope displacement prediction model is constructed. To verify the superiority of the VMLL model, a comparative analysis was conducted against LSSVM, LSTM, and the VMD-LSSVM-LSTM models. The results demonstrate that the VMLL model achieves the highest prediction accuracy, with a Mean Absolute Percentage Error (MAPE) of 0.4022%, a Mean Absolute Error (MAE) of 0.016 mm, a Root Mean Square Error (RMSE) of 0.0206 mm, a coefficient of determination (R²) of 94.08%, and a Variance Accounted For (VAF) of 96.5%. Compared with the other three models, the VMLL model reduces the MAPE, MAE, and RMSE by 30.41–67.62%, 30.38–67.40%, and 27.32–71.00%, respectively. Meanwhile, it improves the R² and VAF by 5.95–217.51% and 0.38–11.48%, respectively. These improvements clearly demonstrate that the VMLL model outperforms the other models, indicating its significant advantage over single prediction models. Furthermore, three additional datasets were used to evaluate the model’s performance. The average values of the performance evaluation metrics for these datasets were 0.6207% (MAPE), 0.0238 mm(MAE), 0.0273 mm(RMSE), 90.33%(R²), and 96.81%(VAF), respectively. These results demonstrate the high accuracy and strong robustness of the proposed model in predicting both horizontal displacement and vertical settlement of slopes, providing a reliable methodological framework for slope stability assessment and landslide disaster early warning.

Ferromagnetic materials are extensively utilized in industrial settings where the early detection and repair of defects is paramount for ensuring industrial safety. During the enhanced magnetic memory detection of micro-defects, many interference signals appear in the detection signal, which makes it difficult to accurately extract the characteristics of the micro-defect signals, significantly affecting detection effectiveness. When improved complete ensemble empirical mode decomposition with adaptive noise (ICEEMDAN) is employed independently for signal denoising, the noise and feature signals of the transition components are retained or removed. When variational mode decomposition (VMD) is employed independently for signal denoising, the denoising effect is restricted because of the difficulty in determining the penalty factor α and the number of decomposition layers m. To solve these problems, a denoising method for enhanced magnetic memory detection signals based on ICEEMDAN and VMD, called ICEEMDAN–VMD, is proposed in this paper. First, a comprehensive index (CI) combining information entropy (IE) and the correlation coefficient R is proposed, then the signal components obtained by performing decomposition with the ICEEMDAN method are divided into noise-dominant components, transition components, and useful signal components based on the CI. Subsequently, VMD is employed to perform secondary decomposition on the transition components obtained from the ICEEMDAN method and calculate the correlation coefficients. Ultimately, the optimal VMD components and useful signal components obtained by the ICEEMDAN method are selected for signal reconstruction to obtain a denoised signal. To validate the effectiveness of the proposed method, the denoising effects of the ICEEMDAN–VMD, ICEEMDAN, and VMD methods were compared based on the signal-to-noise ratio (SNR) and fuzzy entropy (FE). The comparison indicated that the ICEEMDAN–VMD denoising method significantly enhanced the denoising effect, and the SNRs of the components of the magnetic field signal could be increased by up to 69.426%. The SNR of each gradient component of the magnetic field signal could be improved by up to ten times, and the FEs of the signal components and their corresponding gradient components could be reduced by 24.198%–81.011%, respectively.

Amyotrophic lateral sclerosis (ALS), also known as motor neuron disease, is a neurological disease that occurs as a result of damage to the nerves in the brain and restriction of muscle movements. Electroencephalography (EEG) is the most common method used in brain imaging to study neurological disorders. Diagnosis of neurological disorders such as ALS, Parkinson's, attention deficit hyperactivity disorder is important in biomedical studies. In recent years, deep learning (DL) models have been started to be applied in the literature for the diagnosis of these diseases. In this study, event-related potentials (ERPs) were obtained from EEG signals obtained as a result of visual stimuli from ALS patients and healthy controls. As a new method, variational mode decomposition (VMD) is applied to the produced ERP signals and the signals are decomposed into subbands. In addition, empirical mode decomposition (EMD), one of the popular decomposition methods in the literature, was also analyzed, and ERP signals were divided into subbands and compared with the VMD method. Subband signals were classified in two stages with the one-dimensional convolutional neural network (1D CNN) model, which is one of the DL techniques proposed in the study. Accuracy, sensitivity, specificity, and F1-Score measurements were obtained using 5- and 10-fold cross-validation to evaluate classifier performance. In the first stage of classification, only VMD and EMD subband signals were used and 92.95% classification accuracy was obtained by the VMD method. In the second stage, VMD, EMD subband signals, and original ERP signals were all classified together with the VMD+ERP model achieving the maximum classification accuracy rate of 90.42%. It is thought that the results of the study will contribute to the diagnosis of similar neurological disorders such as ALS, attention studies based on visual stimuli, and the development of brain-computer interface (BCI) systems using the method applied to the proposed ERP signals.