Light Deep Models for Cognitive Computing in Intelligent Transportation Systems

BackgroundSurgical process modeling automatically identifies surgical phases, and further improvement in recognition accuracy is expected with deep learning. Surgical tool or time series information has been used to improve the recognition accuracy of a model. However, it is difficult to collect this information continuously intraoperatively. The present study aimed to develop a deep convolution neural network (CNN) model that correctly identifies the surgical phase during laparoscopic cholecystectomy (LC).MethodsWe divided LC into six surgical phases (P1–P6) and one redundant phase (P0). We prepared 115 LC videos and converted them to image frames at 3 fps. Three experienced doctors labeled the surgical phases in all image frames. Our deep CNN model was trained with 106 of the 115 annotation datasets and was evaluated with the remaining datasets. By depending on both the prediction probability and frequency for a certain period, we aimed for highly accurate surgical phase recognition in the operation room.ResultsNine full LC videos were converted into image frames and were fed to our deep CNN model. The average accuracy, precision, and recall were 0.970, 0.855, and 0.863, respectively.ConclusionThe deep learning CNN model in this study successfully identified both the six surgical phases and the redundant phase, P0, which may increase the versatility of the surgical process recognition model for clinical use. We believe that this model can be used in artificial intelligence for medical devices. The degree of recognition accuracy is expected to improve with developments in advanced deep learning algorithms.

The thesis addresses the following challenging problems of detecting and tracking humans in the presence of occlusions in typical surveillance videos: (1) adaptation of semantic-part-based human detectors to new surveillance video sequence when trained detectors using other video data not performing well on the new video data; (2) tracking of humans with person identification minimizing identification errors over longer tracking periods; and (3) hierarchical spatial and temporal analysis for discriminative tracking of human targets. The thesis aims to improve the state-of-the-art performance in human detection and tracking by studying the human detectors, extended tracking of track segments (tracklets) generated from short term tracking of detection responses. For the adaptation of semantic-part-based human detectors to new surveillance video sequence, a uni ed deep CNN model for joint learning of features, semantic pedestrian part detectors and a transfer learning model is developed. The components within this deep CNN model interact with each other in the learning process, which facilitates the optimization of the learned components during the co-operative learning. In particular, an adaptation layer is proposed to embed the capability of knowledge transfer into the CNN model. As a result, the proposed transferred CNN (T-CNN) model is able to transfer the visual knowledge of the semantic pedestrian parts from the source data to target data. Extensive experimental evaluations show that the proposed method is better than other deep learning based methods in terms of detection performance. Moreover, the adaptive deep features can be complementary to the pre-defined features used by other state-of-the-art methods. For tracking of humans with person identification minimizing identification errors over longer tracking periods, a novel method, based on online target-specific metric learning and coherent dynamics estimation, for tracklet association by network flow optimization is developed. The proposed framework aims to exploit appearance and motion cues to prevent identity switches during tracking and also to recover missed detections. The target-specific metrics (appearance cue) and motion dynamics (motion cue) are proposed to be learned and estimated online, i.e. during the tracking process. Furthermore, a learning algorithm to learn the weights of motion and appearance tracking cues for tracklet affinity models is proposed to handle some difficult situations. Extensive evaluations following state-of-the-art practices have been conducted and the results from these evaluations show the improvements by the proposed method over some existing state-of-the-art methods. In hierarchical spatial and temporal analysis for discriminative tracking of human targets, inspired by recent advances in convolutional neural network (CNN) architectures, a novel uni ed deep model for tracklet association, which can jointly learn the CNNs and temporally constrained metrics, is developed. Furthermore, a novel loss function incorporating temporally constrained multi-task learning mechanism is developed to make the deep model more effective in solving the tracklet association problem. Extensive experimental results comparing with the state-of-the-art methods demonstrate the effectiveness and superiority of the proposed unified deep model.

Background Incidence rate of thyroid cancer is steadily increasing due to overdiagnosis and overtreatment. Thyroid ultrasound is commonly used to diagnose thyroid cancer. The aim of this study is to examine the accuracy of using deep convolutional neural network (DCNN) models to improve diagnosis of thyroid cancer by analyzing sonographic imaging data from clinical thyroid ultrasound. Methods A total of 131,731 sonographic images from 17,627 thyroid cancer patients and 180,668 sonographic images from 25,325 controls used as training set were obtained from Tianjin Cancer Hospital. Images from anatomical sites that did not have cancer according to location sign on the image were not included. All thyroid cancer patients and 13·2% of controls (51,255 images) were confirmed by pathological reports. DCNN is a specific type of neural network optimized for image recognition. We trained two DCNN models on the training set and subsequently evaluated the performance on one independent internal (Tianjin, 1,118 individuals) and two external (Jilin,154 individuals; Weihai, 1,420 individuals) validation sets. Individuals in the validation sets all have pathological examinations. We compared the specificity/sensitivity of DCNN models with the performance of six thyroid ultrasound radiologists on these three validation sets. Findings DCNN model achieved high performance in identifying thyroid cancer patients versus six experience radiologists: for Tianjin validation set, sensitivity was 92·2% versus 96·9% (95% CI 89·7% - 94·3% vs. 93·9% - 98·6%; p = 0·003), and specificity was 85·6% versus 59·4% (95% CI 82·4% - 88·4% vs. 53% - 65·6%; p < 0·0001); for Jilin validation set, sensitivity was 84·3% versus 92·9% (95% CI 73·6% - 91·9% vs. 84·1% - 97·6%; p = 0·05), and specificity was 86·9% versus 57·1% (95% CI 77·8% - 93·3% vs. 45·9% - 67·9%; p < 0·0001); for Weihai validation set, sensitivity was 84·5% versus 89% (95% CI 81·2% - 87·4% vs. 81·9% - 94%; p = 0·2), and specificity was 87·5% versus 68·6% (95% CI 85·1% - 89·6% vs. 60·7% - 75·8%; p < 0·0001). Interpretation DCNN models exhibited high accuracy, sensitivity, and specificity in identifying thyroid cancer patients at levels comparable to or higher than six experienced radiologists. Conferred by the high specificity of DCNN models, the rate of overdiagnosis and overtreatment of patients with thyroid cancer is expected to decrease. This supports future application of the deep learning models to clinical practice for thyroid cancer diagnosis. However, further validation of these DCNN models in prospective clinical trials is warranted. Funding The Program for Changjiang Scholars and Innovative Research Team in University in China (IRT_14R40), National Natural Science Foundation of China (31801117). Citation Format: Xiangchun Li, Sheng Zhang, Qiang Zhang, Xi Wei, Yi Pan, Jing Zhao, Xiaojie Xin, Xiaoqing Wang, Fan Yang, Jianxin Li, Meng Yang, Qinghua Wang, Xiangqian Zheng, Yanhui Zhao, Lun Zhang, Xudong Wang, Zhimin Zheng, Christopher T. Whitlow, Metin N. Gurcan, Boris Pasche, Ming Gao, Wei Zhang, Kexin Chen. Diagnosis of thyroid cancer using deep convolutional neural network models applied to sonographic images from clinical ultrasound exams [abstract]. In: Proceedings of the American Association for Cancer Research Annual Meeting 2019; 2019 Mar 29-Apr 3; Atlanta, GA. Philadelphia (PA): AACR; Cancer Res 2019;79(13 Suppl):Abstract nr 1394.

Nowadays, Intelligent Transportation System (ITS) has become one of the most popular subjects of scientific research. ITS provides innovative services to transport and traffic monitoring like vehicle segmentation and classification. Image understanding and object semantic segmentation in traffic scenes is a very important topic in the trend of autonomous driving issues, like autonomous vehicles and robotics. Actually, Deep Convolution Neural Network (CNN) architectures have given very good results and good performance in computer vision tasks such as classification, object detection, and segmentation. In this scope, we can distinguish two modes of CNN training, the pre-trained model and the training from scratch. In fact, deep neural network training without pre-trained weights and little data requires more training iterations. Besides, deeper models are more efficient than their shallow counterparts for the task of semantic segmentation. In this paper, we will make a comparative study between many deep CNNs models that can train the CNN model from scratch on small datasets, in addition, we will use data augmentation techniques. Extensive experiments were performed on the MiniCity urban scene dataset to prove the effectiveness of the used neural networks while obtaining promising results.

Understanding the learning mechanism of convolutional neural networks in spectral analysis

For the purpose of applying information technology to the creation of ink style painting, the algorithm of ink painting rendering based on the deep learning framework and convolutional neural network model is designed and improved. Firstly, the ink style rendering program is written in Python. Secondly, VGG under Caffe architecture and Illustration 2Vec models are transplanted to TensorFlow architecture, and the image is rendered in ink style based on deep learning framework and convolutional neural network model. Finally, based on Node.js, the server-side program for image ink style rendering is built. Among them, Express is adopted as the Web-side framework, and the front-end page effect is completed. The results show that the ink rendering logic program is applicable, and the expected purpose is achieved.

Electricity theft is harmful to power grids. Integrating information flows with energy flows, smart grids can help to solve the problem of electricity theft owning to the availability of massive data generated from smart grids. The data analysis on the data of smart grids is helpful in detecting electricity theft because of the abnormal electricity consumption pattern of energy thieves. However, the existing methods have poor detection accuracy of electricity theft since most of them were conducted on one-dimensional (1-D) electricity consumption data and failed to capture the periodicity of electricity consumption. In this paper, we originally propose a novel electricity-theft detection method based on wide and deep convolutional neural networks (CNN) model to address the above concerns. In particular, wide and deep CNN model consists of two components: the wide component and the deep CNN component. The deep CNN component can accurately identify the nonperiodicity of electricity theft and the periodicity of normal electricity usage based on 2-D electricity consumption data. Meanwhile, the wide component can capture the global features of 1-D electricity consumption data. As a result, wide and deep CNN model can achieve the excellent performance in electricity-theft detection. Extensive experiments based on realistic dataset show that wide and deep CNN model outperforms other existing methods.

This study leveraged Convolutional Neural Network (CNN) models to estimate canopy height in Southeast Australian forests before and after the 2019–2020 bushfire event, using inputs from Sentinel-1, Sentinel-2, spectral indices, and terrain features and GEDI canopy height (rh99) as target variables. Our research consisted of three primary objectives: (1) an evaluation of GEDI rh99 canopy height in relation to an nDSM derived from airborne LiDAR, (2) the development of two CNN models for pre- and post-fire scenarios, and (3) utilizing the trained CNN models to generate pre- and post-fire canopy height maps and canopy height change maps across the continuous landscape. GEDI rh99 accuracy analysis revealed R 2 = 0.85, RMSE = 7.25 m and nRMSE = 0.23 for pre-fire GEDI and R 2 = 0.78, RMSE = 10.1 m and nRMSE = 0.3 for post-fire GEDI. The pre-fire CNN model achieved R 2 = 0.75, RMSE = 7.29 m and nRMSE = 0.22, and post-fire CNN model achieved R 2 = 0.62, RMSE = 11.67 m, and nRMSE = 0.34 when validated against nDSM. Bias analysis was conducted, revealing that GEDI rh99 underestimated nDSM across all canopy height ranges, and slope has no significant impact on GEDI accuracy. Notably, post-fire GEDI rh99 exhibited significant underestimation in high to extreme fire severity. The CNN models’ prediction displayed overestimation in short forests < 20 m and increasing underestimation in taller forests > 20 m and underestimation in high and extreme fire severity. Subsequent investigation indicated that canopy layer thinning in high fire severity conditions resulted in weak GEDI waveform signals and consequent bias. Additionally, the GEDI rh99 bias was propagated to the CNN models, together with insensitivity of spectral band values to canopy height in dense and burnt forests potentially contributed to models’ bias. Finally, we demonstrated CNN models’ ability to monitor forest recovery by generating canopy height maps spanning East Gippsland from 2019 to 2023.

A case study on computer-aided diagnosis of nonerosive reflux disease using deep learning techniques

Automatic prediction of citrus fruit diseases requires the selection of a suitable classification model among various Convolutional Neural Network (CNN) models. The CNN models are the most effective for image classification. However, more than one CNN model occasionally performs closer to each other. Choosing the best classification model requires considerable effort in this situation. In this study, 17 CNN models were used for citrus fruit disease identification. Citrus fruit diseases include anthracnose, blackspot, canker, scab, and healthy. In this research, the performance of CNN models was analysed, and a two-phase statistical analysis was carried out to determine which CNN model provided the most accurate predictions of citrus crop disease. The 17 CNN models used were AlexNet, Darknet, Densenet, efficientnet, nasnetlarge, googlenet, inceptionresnetv2, inceptionv3, mobilenetv2, nasnetmobile, Xception, squeezenet, resnet18, resnet50, resnet101, vgg16, and vgg19. The two-phase statistical analysis was Duncan's multiple range test, followed by the Wilcoxon signed-rank test is the second one. Again, in order to do a statistical analysis, nine different indicators, including “accuracy, sensitivity, specificity, precision, FPR, F1 Score, MCC, Kappa, and computing time”, were taken into consideration. After the execution of 17 CNN models and twophase statistical analysis, it was revealed that resnet101 is superior among CNN models for citrus fruit disease prediction.

To better understand and improve the prediction of the seasonal surface temperature (TS) across the United States, we employed convolutional neural network (CNN) models trained on the Community Earth System Model Version 2 Large Ensemble (CESM2 LENS). We used lagged sea surface temperatures (SST) over the tropical Pacific region, containing the information of the El Niño Southern Oscillation (ENSO), as input for the CNN models. ENSO is the principal driver of variability in seasonal US surface temperatures (TSUS) and employing CNN models allows for spatiotemporal aspects of ENSO to be analyzed to make seasonal TSUS predictions. For predicting TSUS, the CNN models exhibited significantly improved skill over standard statistical multilinear regression (MLR) models and dynamical forecasts across most regions in the US, for lead times ranging from 1 to 6 months. Furthermore, we employed the CNN models to predict seasonal TSUS during extreme ENSO events. For these events, the CNN models outperformed the MLR models in predicting the effects on seasonal TSUS, suggesting that the CNN models are able to capture the ENSO‐TSUS teleconnection more effectively. Results from a heatmap analysis demonstrate that the CNN models utilize spatial features of ENSO rather than solely the magnitude of the ENSO events, indicating that the improved skill of seasonal TSUS is due to analyzing spatial variation in ENSO events. The proposed CNN model demonstrates a promising improvement in prediction skill compared to existing methods, suggesting a potential path forward for enhancing TSUS forecast skill from subseasonal to seasonal timescales.

Developing a treatment strategy that effectively prolongs the lives of people with brain tumors requires an accurate diagnosis of the condition. Therefore, improving the preoperative classification of meningiomas is a priority. Machine learning (ML) has made great strides thanks to the development of convolutional neural networks (CNNs) and computer-aided tumor detection systems. The deep convolutional layers automatically extract important and dependable information from the input space, in contrast to more traditional neural network layers. One recent and promising advancement in this field is ML. Still, there is a dearth of studies being carried out in this area. Therefore, starting with the analysis of magnetic resonance images, we have suggested in this research work a tried-and-tested and methodical strategy for real-time meningioma diagnosis by image segmentation using a very deep transfer learning CNN model or DNN model (VGG-16) with CUDA. Since the VGGNet CNN model has a greater level of accuracy than other deep CNN models like AlexNet, GoogleNet, etc., we have chosen to employ it. The VGG network that we have constructed with very small convolutional filters consists of 13 convolutional layers and 3 fully connected layers. Our VGGNet model takes in an sMRI FLAIR image input. The VGG's convolutional layers leverage a minimal receptive field, i.e., 3 × 3, the smallest possible size that still captures up/down and left/right. Moreover, there are also 1 × 1 convolution filters acting as a linear transformation of the input. This is followed by a ReLU unit. The convolution stride is fixed at 1 pixel to keep the spatial resolution preserved after convolution. All the hidden layers in our VGG network also use ReLU. A dataset consisting of 264 3D FLAIR sMRI image segments from three different classes (meningioma, tuberculoma, and normal) was employed. The number of epochs in the Sequential Model was set to 10. The Keras layers that we used were Dense, Dropout, Flatten, Batch Normalization, and ReLU. According to the simulation findings, our suggested model successfully classified all of the data in the dataset used, with a 99.0% overall accuracy. The performance metrics of the implemented model and confusion matrix for tumor classification indicate the model's high accuracy in brain tumor classification. The good outcomes demonstrate the possibility of our suggested method as a useful diagnostic tool, promoting better understanding, a prognostic tool for clinical outcomes, and an efficient brain tumor treatment planning tool. It was demonstrated that several performance metrics we computed using the confusion matrix of the previously used model were very good. Consequently, we think that the approach we have suggested is an important way to identify brain tumors.

Excessive withdrawal of groundwater for agricultural irrigation can cause seawater intrusion into coastal aquifers. Such a case will in turn results in deterioration of irrigation water quality. Determination of irrigation water quality with traditional methods is a time-consuming and costly process. However, machine learning algorithms can be useful tools for modeling and estimating groundwater quality used for irrigation water purposes. In this study, TDS, PS, SAR, and Cl parameters of groundwater were estimated with models based on EC and pH variables. For this purpose, prediction performances of two different deep learning methods (convolutional neural network (CNN) and deep neural network (DNN)) and two different classical machine learning (Random Forest (RF) and extreme gradient boosting (XGBoost)) methods were compared. In addition, predictive uncertainty of the models was determined by quantile regression (QR) analysis. Performance criteria and results of uncertainty analysis revealed that CNN (in testing phase, NSE = 0.95 for TDS, NSE = 0.96 for PS, NSE = 0.67 for SAR and NSE = 0.93 for CI) and DNN (in testing phase, NSE = 0.91 for TDS, NSE = 0.91 for PS, NSE = 0.57 for SAR and NSE = 0.94 for Cl) models had quite a close performance in estimation of TDS, PS, SAR, and Cl parameters and higher than the other two classical machine learning methods. As a result, the CNN model can be considered the best performing model in estimating all quality parameters due to the highest NSE and lowest RMSE values. In addition, the Taylor diagram showed that the values estimated using the CNN model had the highest correlation with the measured data. It was determined that the model with the lowest uncertainty based on the PICP statistics was DNN, followed by the CNN model. However, the CNN model has predicted outliers more accurately. Present findings proved that deep learning models could offer efficient tools for predicting irrigation water quality parameters.

The main goal of this research was to accurately diagnose diseases in pepper plants using convolutional neural network (CNN) models and visual parameters features. Thus, we aimed to build a computing system that can utilise visual cues to identify plant diseases with almost 100% reliability. A total of 2,200 images were trained and tested on a dataset, which was divided into healthy leaves and those with bacterial ailments. The images were preprocessed, resized to 300x300 pixels, and then segmented to extract the relevant traits from them. This CNN model, in a word, is accurate because it detects diseases with 99.65% accuracy. If we want to speak of a high accuracy rate, that's the CNN model. It learns to identify the intricate patterns and features in pepper plants that are associated with diseases. CNN can make revolutionary changes to the identification of plant diseases and help prevent crop damage through timely treatments. Automatic identification of the disease makes life easier for both agriculturists and scientists. The results underscore the importance of image preprocessing, segmentation, and feature extraction in improving the ability of CNN models to locate diseases. Additionally, the performance of the CNN model was compared with other machine learning models such as KNN, Decision Tree, ANN, and Random Forest. It was found that the developed CNN model can predict the response with greater accuracy than the others. Modern high-tech precision farming systems might utilise proposed CNN models for plant disease diagnosis.

Distinguishing pericarpium citri reticulatae of different origins using terahertz time-domain spectroscopy combined with convolutional neural networks