Lightweight Cryptographic Algorithms for Guessing Attack Protection in Complex Internet of Things Applications

The introduction of real-time Internet of Things (IoT) applications has introduced unprecedented demands on communication systems, which require ultra-low latency, high reliability, and massive device connectivity. Fifth-generation (5G) wireless networks represent a foundational shift in network architecture, offering advanced capabilities such as ultra-reliable low-latency communication (URLLC), mobile edge computing (MEC), and network slicing to support time-sensitive IoT services at scale. This review critically examines how these architectural enhancements enable real-time IoT deployment across domains, with inclusion of autonomous transportation, industrial automation, remote healthcare, and smart energy systems. While 5G provides a robust framework, its real-world adoption has faced technical constraints related to interoperability, spectrum management, energy efficiency, and cybersecurity. The paper synthesizes existing research on these challenges, and highlight persistent integration gaps and trade-offs that must be navigated to achieve deterministic performance in complex environments. In response, future research directions are proposed, including AI-driven orchestration, blockchain-based trust models, and emerging sixth-generation (6G) technologies. This work provides a comprehensive foundation for scalable, secure, and latency-guaranteed designs of real-time IoT systems in the 5G era and beyond.

Source-location privacy (SLP) protection improves security in event monitoring wireless sensor networks (WSNs) for Internet of Things (IoT) applications. However, due to constrained energy resources, WSNs incur coverage holes that affect the level of SLP protection. Existing studies have ineffectively analysed the effects of coverage holes on SLP protection. Noting the limitation, this study investigated the coverage hole effects. Performance of various SLP routing protocols was evaluated based on the sensor node utilization ratio, attack success rate, end-to-end delay, and packet delivery ratio. Then, considering the challenge of limited battery power in IoT sensors, the performance gains and limitations of the protocols were identified. Simulation results demonstrate that the data dissemination SLP routing protocol (DIRP) outperforms other protocols. However, the performance of DIRP is significantly affected by coverage holes. The results suggest that for DIRP to be viable in IoT applications, the integration of distributed energy resources should be considered.

Internet of Things (IoT) networks are being designed to connect billions of sensors/devices for an application-specific environment to provide services and carry out special tasks. It enables the virtual connection of the real-world physical devices with Internet cyberspace. While, there is an exponentially growing trend in the use of IoT technology for diverse applications such as smart agriculture, smart industries, smart hospitals, smart homes, etc., there are pressing design issues which affect the IoT network performance in the long run, for example, replacement of batteries for increasing the lifetime of devices to maintain the network longevity. To tackle this challenge, various wireless powered-based energy transfer paradigms were proposed over time. Backscatter communication (BackCom) is likewise one of the energy-efficient solutions proposed, which can satisfy the stringent green communication aspects of IoT networks. To achieve massive connectivity in BackCom-enabled IoT network, selecting a suitable multiple access scheme is also a crucial part. Most multiple access schemes proposed for BackCom systems are based on frequency or timeslots sharing techniques. Multiple access techniques proposed for BackCom IoT system can reap the gain of non-orthogonal multiple access (NOMA) principle. In NOMA, multiple end nodes (ENs) of sensors network is served in the same resource block, thereby, increasing the spectrum efficiency of BackCom IoT system. In this chapter, we discuss the prospects of backscatter technique with application of NOMA for green communication in IoT network.

Ubiquitous sensing enabled networks have transformed the living chores into a modern living standard in which each move is automated. The dependency of humans on IoT is increasing every day, so the IoT networks must be efficient and secure. Secure communication in the Internet of Things (IoT) networks is a hotly debated research issue. Cryptography is one of the solutions for secure data transmission. In IoT networks, designing a cryptography algorithm is a major challenge for resource constraint environment. So, when we talk about cryptography in IoT, this term transforms into “lightweight cryptography.” This paper presents a review of lightweight cryptography algorithms in the form of a stream cipher, block cipher, symmetric encryption, and asymmetric encryption.

The environmental impacts that are associated with the interconnected sensor devices in the Internet of Things (IoT) network are minimized with the utilization of green communication. This is because, when the IoT devices tend to grow, the IoT system becomes more prone to issues regarding the utilization of resources, sustainability, and energy consumption within the communication system. Tuning the communication protocols, lowering the IoT device’s energy usage rate, and establishing an effective technique for the transmission of data are performed. This is achieved by the green communication technique, which aids in the establishment of significant energy savings in the IoT network. For devices with limited power sources, the green communication technology offers an extended battery life. Despite the enormous potential of IoT technology, a number of obstacles need to be overcome, including those related to load balancing, security, storage, privacy, energy management, and device heterogeneity. In response to the challenges posed by conventional models, an innovative solution for the selection of Cluster Head (CH) using a hybrid approach is devised here. The energy consumption of sensor nodes is influenced by various factors, such asCH load, temperature, distance, residual energy, the number of alive nodes, delay, and so on. To address these challenges in IoT networks, a hybrid approach that combines the Squid Game Optimizer (SGO) and the Artificial Gorilla Troops Optimizer (AGTO) for the optimal selection of CH is suggested. The implemented approach is named Hybrid Squid Game with Artificial Gorilla Troops Optimizer (HSG-AGTO). This approach aims to optimize the above-mentioned factors and overcome energy consumption challenges in IoT networks. The effectiveness of the model is validated, and the results demonstrate the superior performance of the suggested model.

The cell-free (CF) network architecture has promising applications in Internet of Things (IoT) networks due to its dynamic and adaptive nature in resource allocation. However, due to the openness of wireless channels and the information interaction of sensitive data, the security issues of CF IoT networks have become more severe, especially in the case of powerful opponents. In this article, a high-level secure transmission technique is utilized to protect the privacy of users, which is called covert communication. Specifically, in the CF IoT network conceived, one IoT device secretly transmits sensitive information to an access point (AP) under the cover of a selected jammer to avoid being detected by other curious IoT devices, which are regarded as potential eavesdroppers (Eves) and determined by the central processing unit (CPU) based on greedy degree. Then, we analyze the joint impact of jamming and greedy degree on the detection error probability (DEP) for Eve, and determine Eve’s minimum DEP as well as the corresponding optimal threshold. To enhance energy efficiency while ensuring communication security, three jamming scheduling schemes have been proposed, namely, the jamming scheduling for both the receiver (Bob) and Eve (JSBE), the jamming scheduling for Eve (JSE), and the jamming scheduling for Bob (JSB). Numerical results indicate that greedy degree dominates the average minimum DEP for Eve when IoT devices tend to be lightweight. Furthermore, JSBE scheme demonstrates superiority in terms of covert rate, covert outage probability (COP), and covert energy efficiency (CEE), which provides an effective solution for high-security transmission of energy-constrained nodes in CF IoT networks.

Due to the use of internet of things (IoT) devices, communication between different things is effective. The application of IoT in agriculture industryplays a key role to make functionalities easy. Using the concept of IoT and wireless sensor network (WSN), smart farming system has been developedin many areas of the world. Precision farming is one of the branches comes forward in this aspect. Many researchers have developed monitoring andautomation system for different functionalities of farming. Using WSN, data acquisition and transmission between IoT devices deployed in farms will be easy. In proposed technique, Kalman filter (KF) is used with prediction analysis to acquire quality data without any noise and to transmit this data for cluster-based WSNs. Due to the use of this approach, the quality of data used for analysis is improved as well as data transfer overhead is minimized in WSN application. Decision tree is used for decision making using prediction analytics for crop yield prediction, crop classification, soil classification, weather prediction, and crop disease prediction. IoT components, such as and cube (IOT Gateway) and Mobius (IOT Service platform), are integrated in proposed system to provide smart solution for crop growth monitoring to users.

The growing interest in the smart device/home/city has resulted in increasing popularity of Internet of Things (IoT) deployment. However, due to the open and heterogeneous nature of IoT networks, there are various challenges to deploy an IoT network, among which security and scalability are the top two to be addressed. To improve the security and scalability for IoT networks, we propose a Software-Defined Virtual Private Network (SD-VPN) solution, in which each IoT application is allocated with its own overlay VPN. The VPN tunnels used in this paper are VxLAN based tunnels and we propose to use the SDN controller to push the flow table of each VPN to the related OpenvSwitch via the OpenFlow protocol. The SD-VPN solution can improve the security of an IoT network by separating the VPN traffic and utilizing service chaining. Meanwhile, it also improves the scalability by its overlay VPN nature and the VxLAN technology.

The Internet of Things (IoT) brings internet connectivity to everyday devices. These devices generate a large volume of information that needs to be transmitted to the nodes running the IoT applications, where they are processed and used to make some output decisions. On the one hand, the quality of these decisions is typically affected by the freshness of the received information, thus requesting frequent updates from the IoT devices. On the other hand, the severe energy, memory, processing, and communication constraints of IoT devices and networks pose limitations in the frequency of sensing and reporting. So, it is crucial to minimize the energy consumed by the device for sensing the environment and for transmitting the update messages, while taking into account the requirements for information freshness. Edge-caching can be effective in reducing the sensing and the transmission frequency; however, it requires a proper refreshing scheme to avoid staleness of information, as IoT applications need timeliness of status updates. Recently, the Age of Information (AoI) metric has been introduced: it is the time elapsed since the generation of the last received update, hence it can describe the timeliness of the IoT application’s knowledge of the process sampled by the IoT device. In this work, we propose a model-driven and AoI-aware optimization scheme for information caching at the network edge. To configure the cache parameters, we formulate an optimization problem that minimizes the energy consumption, considering both the sampling frequency and the average frequency of the requests sent to the device for refreshing the cache, while satisfying an AoI requirement expressed by the IoT application. We apply our caching scheme in an emulated IoT network, and we show that it minimizes the energy cost while satisfying the AoI requirement. We also compare the case in which the proposed caching scheme is implemented at the network edge against the case in which there is not a cache at the network edge. We show that the optimized cache can significantly lower the energy cost of devices that have a high transmission cost because it can reduce the number of transmissions. Moreover, the cache makes the system less sensitive to higher application-request rates, as the number of messages forwarded to the devices depends on the cache parameters.

Internet of Things (IoT) is a technology that allows various physical devices to connect to each other and exchange data via the internet network. The application of IoT is increasingly widespread in various sectors such as smart homes, manufacturing industries, smart agriculture, and healthcare. However, along with the increasing number of devices and the volume of data traffic sent, the potential risk of cybersecurity threats is also increasing. The large number of IoT devices that have limited computing capabilities makes the system more vulnerable to various attacks, including intrusion, exploitation of system weaknesses, and Distributed Denial of Service (DDoS) attacks. Therefore, early detection of anomalies in network traffic is a crucial aspect to maintain the security and stability of IoT systems. This study aims to develop and implement a Support Vector Machine (SVM)-based architecture as a classification method in an anomaly detection system on an IoT network. SVM was chosen because of its ability to handle high-dimensional data and non-linear classification effectively. The methodology used includes the process of extracting features from IoT network traffic datasets, data normalization, model training using the SVM algorithm, and evaluating model performance in distinguishing between normal and anomalous traffic. Thus, the implementation of SVM architecture can be an effective and efficient solution in intrusion detection systems for IoT networks. This research also opens up opportunities for the development of more adaptive security systems by integrating machine learning-based detection models into large-scale IoT infrastructures.

A fuzzy based Co-Operative Blackmailing Attack detection scheme for Edge Computing nodes in MANET-IOT environment

Survey on blockchain for Internet of Things

Internet of Things (IoT) have opened the door to a world of unlimited possibilities for implementations in varied sectors in society, but it also has many challenges. One of those challenges is security and privacy. IoT devices are more susceptible to security threats and attacks. Due to constraints of the IoT devices such as area, power, memory, etc., there is a lack of security solutions that are compatible with IoT devices and applications, which is leading this world of securely connected things to the “internet of insecure things.” A promising solution to this problem is going beyond the standard or classical techniques to implementing the security solutions in the hardware of the IoT device. The integration of emerging technologies in IoT networks, such as machine learning, blockchain, fog/edge/cloud computing, and quantum computing have added more vulnerable points in the network. This paper introduces a comprehensive study on IoT security threats and solutions. Additionally, this survey outlines how emerging technologies such as machine learning and blockchain are integrated in IoT, challenges resulted from this integration, and potential solutions to these challenges. The paper utilizes the 4-layer IoT architecture as a reference to identify security issues with corresponding solutions.

A blockchain-enabled Model integrates blockchain technology with Intrusion Detection Systems to enhance the security of Internet of Things (IoT) networks. It ensures data integrity, decentralization, and tamper-proof logging of intrusion detection. The approach improves trust, transparency, and real-time threat detection in distributed IoT environments. The existing blockchain-based IDS approaches, Blockchain Enabled (BCE-IoT), uniquely integrate blockchain consensus with federated-style local training, lightweight cryptography, and Shapley Additive Explanations (SHAP)-based explainability, ensuring both security and interpretability in IoT environments. The proposed work combines Blockchain technology with explainable artificial intelligence solutions to create a new cybersecurity Model that strengthens intrusion detection within IoT networks. The proposed model enhances transparency in tracking cyberattacks by combining blockchain security storage capabilities with SHAP, an explainable AI. This research utilises machine learning and artificial intelligence to detect threats in real-time, countering Distributed Denial of Service (DDoS), Denial of Service (DoS), scanning, Cross-Site Scripting (XSS), injection, password, and backdoor attacks. BCE-IoT delivers more precise security by combining blockchain’s permanent data features and AI anomaly detectors, thereby reducing security alert mistakes. The performance effectiveness of Blockchain-Enabled IoT surpasses that of the Content Integrity Detection System. It combines Blockchain and Software-Defined Networking to enhance security in network environments, utilising blockchain-based mutual confirmation for software-defined networking to detect and block cyber threats. The evaluation establishes BCE-IoT as an effective IoT network security solution that delivers strong cybersecurity features, is adaptable to modern connected environments, and offers interpretable security solutions. The performance evaluations demonstrate that BCE-IoT provides a robust, flexible, and interpretable cybersecurity solution suitable for modern IoT environments.

Background. With the proliferation of Internet of Things (IoT) networks in the digital age, the risk of cyberattacks, especially DDoS attacks, is also increasing. IoT devices such as smart refrigerators, thermostats, webcams and other Internet-connected home appliances are being targeted by attackers who can use them as part of a botnet to conduct DDoS attacks. These devices often have inadequate network security and are rarely updated, making them vulnerable. DDoS attacks can result in significant losses such as lost revenue, reputational damage and costs to restore services. So, the vulnerability of IoT networks to DDoS attacks and the need to develop effective protection measures is a pressing issue. Objective. The purpose of the paper is to analyse software that supports DDoS attacks in IoT networks. Provide general recommendations to help improve approaches to defence measures in IoT networks against DDoS-enabled malware. Methods. Five main DDoS attack models are considered: agent-handler model, reflexive model, IRC-based model, web-based model, and P2P-based model. Three most dangerous software capable of DDoS attacks on IoT networks are analyzed: Mirai, XOR.DDoS and Linux.Hydra. Results. There are many models and methods of DDoS attacks on IoT networks. The most dangerous are Mirai, XOR.DDoS and Linux.Hydra. Each of these software has its own specific characteristics and methods of carrying out attacks. The study also showed that there are several effective measures to counter these attacks, including setting strong passwords, regularly updating software, setting up traffic filters and restricting network access. Conclusions. Key aspects of DDoS attacks, their models and process steps are considered. The paper focuses on the three most dangerous software used to conduct such attacks and provides recommendations on how to counteract them.