• Home
  • Search
  • Line-edge roughness performance targets for EUV lithography
  • Cite Icon32
  • https://doi.org/10.1117/12.2258660Copy DOI Icon

Line-edge roughness performance targets for EUV lithography

  • Abstract
  • Literature Map
  • References
  • Citations
  • Similar Papers
Abstract

Our paper will use stochastic simulations to explore how EUV pattern roughness can cause device failure through rare events, so-called black swans. We examine the impact of stochastic noise on the yield of simple wiring patterns with 36nm pitch, corresponding to 7nm node logic, using a local Critical Dimension (CD)-based fail criteria Contact hole failures are examined in a similar way. For our nominal EUV process, local CD uniformity variation and local Pattern Placement Error variation was observed, but no pattern failures were seen in the modest (few thousand) number of features simulated. We degraded the image quality by incorporating Moving Standard Deviation (MSD) blurring to degrade the Image Log-Slope (ILS), and were able to find conditions where pattern failures were observed. We determined the Line Width Roughness (LWR) value as a of the ILS. By use of an artificial step function image degraded by various MSD blur, we were able to extend the LWR vs ILS curve into regimes that might be available for future EUV imagery. As we decreased the image quality, we observed LWR grow and also began to see pattern failures. For high image quality, we saw CD distributions that were symmetrical and close to Gaussian in shape. Lower image quality caused CD distributions that were asymmetric, with fat tails on the low CD side (under-exposed) which were associated with pattern failures. Similar non-Gaussian CD distributions were associated with image conditions that caused missing contact holes, i.e. CD=0.

Similar Papers
  • Conference Article
  • Citations4

Comparison of simulated and experimental CD-limited yield for a submicron i-line process

  • Sep 22, 1995
  • Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE
  • Edward W Charrier +2
  • Conference Article
  • Citations1

New method removing SEM image noise to characterize CD and LWR

  • Mar 26, 2019
  • Shinji Kobayashi +8
  • Conference Article

Novel technologies in coater/developer to enhance the CD stability and to improve the defectivity toward N7 and smaller nodes

  • Mar 26, 2019
  • Yuya Kamei +10
  • Conference Article
  • Citations1

SEM metrology damage in polysilicon line and its impact on LWR evaluation

  • Mar 13, 2009
  • Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE
  • S.-B Wang +4
  • Conference Article
  • Citations20

CD uniformity improvement for EUV resists process: EUV resolution enhancement layer

  • Mar 17, 2011
  • Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE
  • Hyun-Woo Kim +7
  • Research Article
  • Citations30

Spacer defined FinFET: Active area patterning of sub-20 nm fins with high density

  • Dec 22, 2006
  • Microelectronic Engineering
  • B Degroote +10
  • Research Article
  • Citations15

Plasma treatments to improve line-width roughness during gate patterning

  • Sep 25, 2013
  • Journal of Micro/Nanolithography, MEMS, and MOEMS
  • Laurent Azarnouche +8
  • Research Article
  • Citations2

Status of EUV Resist and Process Development at IC Manufacture to Implement EUV Lithography to 2X DRAM and Beyond

  • Jan 01, 2011
  • Journal of Photopolymer Science and Technology
  • Hyun-Woo Kim +7
  • Conference Article
  • Citations3

Simulation-assisted layout biasing in EUV lithography and prediction of an optimum resist parameter space

  • Apr 01, 2013
  • Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE
  • Chandra Sarma +4
  • Conference Article
  • Citations1

Roughness power spectral density as a function of aerial image and basic process/resist parameter

  • Mar 25, 2019
  • Charlotte A Cutler +7
  • Conference Article
  • Citations11

Line edge roughness characterization of sub-50nm structures using CD-SAXS: round-robin benchmark results

  • Mar 16, 2007
  • Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE
  • Chengqing Wang +11
  • Conference Article
  • Citations1

Novel bottom-up organic mandrel growth to enable organic mandrel EUV SADP for sub-5nm node technologies

  • Feb 22, 2021
  • Katie Lutker-Lee +3
  • Conference Article
  • Citations4

Line Edge Roughness and Cross Sectional Characterization of Sub-50 nm Structures Using Critical Dimension Small Angle X-ray Scattering

  • Jan 01, 2007
  • AIP conference proceedings
  • Chengqing Wang +17
  • Conference Article
  • Citations2

Photon flux requirements for EUV reticle imaging microscopy in the 22- and 16nm nodes

  • Mar 11, 2010
  • Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE
  • Daniel T Wintz +3
  • Research Article
  • Citations2

Evaluation of EUV mask impacts on wafer line-width roughness using aerial and SEM image analyses

  • Sep 17, 2018
  • Journal of Micro/Nanolithography, MEMS, and MOEMS
  • Xuemei Chen +7
Cactus Communications logo

Copyright 2026 Cactus Communications. All rights reserved.