Liquid lens for adaptive interferometric particle imaging.

Noncontacting shape measurement for 3-D objects is important in automated manufacturing, component quality control, reverse engineering, etc. Phase-shifting method effectively attains high resolution and high accuracy in analyzing phase information on a projected grating. This technique, however, is difficult to be applied to dynamic condition since usually it requires several images. We developed a digital micromirror device (DMD) camera for phase analysis. In this paper, an one-shot shape and deformation measurement method using a DMD camera is proposed. The DMD camera consists of a DMD, a CCD, and two imaging lenses. In optics of the DMD camera, individual DMD mirrors correspond to individual CCD pixels. The DMD on-off binary pattern can be changed more than 6900 times in one second using an accessory light modulator package (ALP) controller board. Individual DMD mirrors operate as controllable high-speed shutters for corresponding CCD pixels. The four phase-shifted images can be recorded within one frame of the CCD camera. Therefore, shape measurement in dynamic condition can be realized without using a high-speed camera. In order to obtain the 3-D information of shape, multiple reference planes are used to calibrate the relationship between phase value and 3D coordinates. The principle and hardware are presented. In an experiment under dynamic condition, 3D shape information can be analyzed from only one captured image.

Digital micromirror devices (DMDs) are micro-electro- mechanical systems, originally developed to display images in projector systems. A DMD in the focal plane of an imaging system can be used as a reprogrammable slit mask of a multi-object spectrometer (MOS) by tilting some of the mirrors towards the spectrometer and tilting the rest of the mirrors away, thereby rejecting the unwanted light (due to the background and foreground objects). A DMD-based MOS can generate new, arbitrary slit patterns in seconds, which significantly reduces the overhead time during astronomical observations. Critically, DMD-based slit masks are extremely lightweight, compact and mechanically robust, which makes them attractive for use in space-based telescopes. As part of a larger effort to investigate the use of DMDs in space telescopes (sponsored by a NASA Strategic Astrophysics Technologies grant), we characterized the optical performance of Texas Instruments DMDs to determine their suitability for use in multi-object spectrometers. The performance of a DMD-based MOS is significantly affected by its optical throughput (reflectance), contrast ratio (the ability of the DMD to reject unwanted light) and scattering properties (which could lead to crosstalk and reduced signal-to-noise ratio in the spectrometer). We measured and quantified the throughput and contrast ratio of a Texas Instruments DMD in several configurations (which emulate the operation of a typical DMD-based MOS) and investigated the scattering properties of the individual DMD mirrors. In this work we present the results of our analysis, describe the performance of a typical DMD- based MOS and discuss the practical limitations of these instruments (such as maximum density of sources and expected signal-to- noise ratio).

Image restoration of the open-loop adaptive optics retinal imaging system based on optical transfer function analysis

The burgeoning field of astrophotonics, the interface between astronomy and photonics, is redefining astronomical instrumentation to replace traditional bulk optical systems with integrated optics. This drives the development of a new promising photonics-integrated interferometric imaging technique, called the segmented planar imaging detector for electro-optical reconnaissance (SPIDER). Compared to conventional imaging systems, SPIDER can reduce the size, weight, and power (SWaP) by one to two orders of magnitude for an equivalent imaging resolution in virtue of photonics-integrated technology. However, SPIDER has a dense lens distribution and tens of separated narrow wavebands demultiplexed by array waveguide gratings. In this paper, we developed a new simplified sparse-aperture photonics-integrated interferometer (SPIN) imaging system. The SPIN imaging system was no more a Michelson configuration interferometer as SPIDER and was designed as a Fizeau configuration interferometer imaging system. This transfer of configuration type affords a more concise structure; the SPIN was designed with much less apertures and fewer wavebands than those of SPIDER. Further, the SPIN yields enhanced modulation transfer function and imaging quality with equivalent aperture diameter, compared with SPIDER. The main barrier of this transfer is the elimination of coupling restriction at the tip of a waveguide, namely the apodization effect. This effect, which is caused by the coupling effect between Fourier lens and waveguide, hinders SPIN imaging systems from getting finer resolution. However, a microscope could be used to eliminate this effect. Moreover, a waveguide array is used to receive these finer details and enlarges the field of view in SPIN. The coupling efficiency of the waveguides and crosstalk errors between waveguides of array were analyzed, which are important for proper parameters setting in SPIN imaging system. Based on these analyses, the imaging principle was derived and a hyper-Laplacian-based imaging reconstruction algorithm was developed. A simulation of the SPIN imaging system with seven apertures and one imaging waveband demonstrated the high imaging quality.

The digital micromirror device DMD is widely used in visible light projection, special-purpose spatial light modulation, and infrared scene simulation, due to its high resolution, uniformity and energy concentration. In some applications that require high frame rate scene image display, it is necessary to ensure that the DMD displays high gray level images at a high frame rate. However, the display frame rate of the pulse width modulation (PWM) method is limited by the minimum time required for DMD loading data, unable to achieve high frame rate display. Although the DMD binary display mode can meet the requirements of high frame rate display, it cannot meet the requirements of high gray level. The paper proposes an image display method that uses light source and DMD to synchronize modulation. Decompose the high-order gray image into bit planes according to the gray threshold, and the DMD displays each bit plane in binary mode under the trigger of an sync pulse. The intensity of the illumination laser source is modulated by an acousto-optic modulator to match the bit plane and the radiated laser power. This method makes use of the function of high frame rate display in DMD binary mode cooperate with light intensity modulation of illumination laser source, and realizes high frame rate and high dynamic range image display. With this method, the maximum frame rate of 8-bit gray level image with 1920 ×1080 resolution can reach 2KHz. The experimental system has realized 200Hz frame rate display of 8-bit gray level image with 1920 ×1080 resolution.

Digital micromirror devices (DMDs) are commercial micro-electromechanical systems, consisting of millions of mirrors which can be individually addressed and tilted into one of two states (+/-12deg). These devices were developed to create binary patterns in video projectors, in the visible range. Commercially available DMDs are hermetically sealed and extremely reliable. Recently, DMDs have been identified as an alternative to microshutter arrays for space-based multi-object spectrometers (MOS). Specifically, the MOS at the heart of the proposed Galactic Evolution Spectroscopic Explorer (GESE) uses the DMD as a reprogrammable slit mask. Unfortunately, the protective borosilicate windows limit the use of DMDs in the UV and IR regimes, where the glass has insufficient throughput. In this work, we present our efforts to replace standard DMD windows with custom windows made from UV-grade fused silica, low-absorption optical sapphire (LAOS) and magnesium fluoride (MgF2). We present transmission measurements of the antireflection coated windows and the reflectance of bare (window removed) DMDs. Furthermore, we investigated the long-term stability of the DMD reflectance and experiments for coating DMD active area with a layer of pure aluminum (Al) to boost reflectance performance in the UV spectral range (200400 nm).

Phase-shifting method effectively attains high resolution and high accuracy in analyzing phase information on a projected grating. It is difficult to apply dynamically, however, because it usually requires several images. We developed a camera based on digital micromirror device (DMD) technology for high-speed phase analysis and shape measurement, called a DMD reflection-type CCD camera or DMD camera. Implementing DMD technology enables accurate control of intensity reaching the imaging detector of a camera. Moiré is used to adjust pixel-to-pixel correspondence highly accuracy. We introduce a controllable high-speed DMD operation board to control DMD mirrors at high-speed, so each DMD mirror operates as a controllable high-speed shutter for the corresponding CCD pixel. In experiments with an application, we conducted DMD integrated phase-shifting method using correlation to analyze phase distributions of projected gratings from images recorded by the DMD camera. We then discuss principles and experimental results under dynamic conditions. This paper is a revised version of one presented at the SPIE International Symposium on Optomechatronic Technologies (ISOT 2005), December 4-7, 2005 at the Sapporo Convention Center, Japan. That paper appears in SPIE Proceedings Vol.6049, 60490I.

We present a 3D electromagnetic simulation of a digital micromirror device (DMD) from 0.4 µm to 5 µm, which accurately models DMD reflectance and contrast ratio, including the effects of diffraction. A DMD is a spatial light modulator with a wide range of applications, including projection displays, 3D printing, and imaging spectroscopy. The physical structure of the DMD induces strong wavelength-dependent diffraction effects that impact the stray light, optical throughput, and pupil illumination distribution of a system. To quantify this, we perform a 3-dimensional electromagnetic finite-difference time-domain simulation, illuminating the DMD with a focused, incoherent beam, explicitly calculating the near-field electric fields, and calculating the far-field distribution of light. The far-field data determines diffraction efficiency and the distribution of light across the pupil. With these models, we are able to study the DMD’s optical efficiency in three key regimes: the specular regime, where the DMD behaves like a segmented mirror with a diffractive component (λ < 1 µm); the diffraction-dominated regime, which is also described by analytic diffraction grating theory (3 µm < λ < 5 µm); and, uniquely, the transition region, where the specular reflection and diffraction contributions are comparable (1 µm < λ < 3 µm). Our results inform system performance parameters, provide optical design constraints, and create a framework of use cases for DMDs.

In recent years, the popular adaptive front-lighting automobile headlight system has become a main emphasis of research that manufacturers will continue to focus great efforts on in the future. In this research we propose a new integral optical design for an automotive headlight system with an advanced light-emitting diode and digital micromirror device (DMD). Traditionally, automobile headlights have all been designed as a low beam light module, whereas the high beam light module still requires using accessory lamps. In anticipation of this new concept of integral optical design, we have researched and designed a single optical system with high and low beam capabilities. To switch on and off the beams, a DMD is typically used. Because DMDs have the capability of redirecting incident light into a specific angle, they also determine the shape of the high or low light beam in order to match the standard of headlight illumination. With collocation of the multicurvature reflection lens design, a DMD can control the light energy distribution and thereby reinforce the resolution of the light beam.

The digital micromirror device (DMD) which is one kind of Micro-Electro-Mechanical System has been widely adapted for use in lighting projection systems, and some new imaging systems such as high-dynamic range imaging, aperture-coded spectral imaging, or medical imaging. The micromirrors on the DMD surface are non-continuous distribution and capable of tilt relative to individual rotation axis, which is different from the plane mirror. Therefore, when the DMD is applied in a convergence imaging path, there is an optical path difference (OPD) between the off-axis chief ray and the on-axis chief ray, and moreover severe non-symmetric imaging on the focal plane. Based on the geometrical optics and aberration theory, this paper proposes a calculation formula that gives the OPD as a function of the image height, the incident angle, the DMD pixel size and the DMD tilt angle in the convergent imaging path. This formula can give the OPD of the system when the optical axis is vertical to the surface of the DMD in an ideal state, which has great significance to the design and adjustment of optical path using DMD devices.

I-ImaS (Intelligent Imaging Sensors) is a European project aiming to produce adaptive x-ray imaging systems using Monolithic Active Pixel Sensors (MAPS) to create optimal diagnostic images. Initial systems concentrate on mammography and cephalography. The on-chip intelligence available to MAPS technology will allow real-time analysis of data during image acquisition, giving the capability to build a truly adaptive imaging system with the potential to create images with maximum diagnostic information within given dose constraints. In our system, the exposure in each image region is optimized and the beam intensity is a function not only of tissue thickness and attenuation, but also of local physical and statistical parameters found in the image itself. Using a linear array of detectors with on-chip intelligence, the system will perform an on-line analysis of the image during the scan and then will optimize the X-ray intensity in order to obtain the maximum diagnostic information from the region of interest while minimizing exposure of less important, or simply less dense, regions. This paper summarizes the testing of the sensors and their electronics carried out using synchrotron radiation, x-ray sources and optical measurements. The sensors are tiled to form a 1.5D linear array. These have been characterised and appropriate correction techniques formulated to take into account misalignments between individual sensors. Full testing of the mammography and cephalography I-ImaS prototypes is now underway and the system intelligence is constantly being upgraded through iterative testing in order to obtain the optimal algorithms and settings.

For an echelle spectrometer based on a digital micromirror device and photomultiplier, a lens group is placed in front of the digital micromirror device and used to converge the two-dimensional spectrum and correct aberration. The matching spectral reduction model is deduced by establishing the mathematical models of the imaging mirror and lens group. According to the known wavelength and corresponding coordinates, the refractive index of the prism is fitted, and the spectrum is divided into three parts to calibrate. Experimental results of a mercury lamp show that the maximum deviations of x and y coordinates are 3.4 pixels and 2.3 pixels in the corrected spectral reduction model. The deviations are in the range of the errors permitted, which means the extraction of order and wavelength satisfy the requirement of the spectrometer.

This paper propose an optical design of adaptive automotive headlight system with advanced light-emitting diodes (LEDs) and digital micro-mirror device (DMD). In recent days, safety of on-road drive plays the role at automotive industries so that fast response of adaptive automotive headlight system becomes a critical issue especially in mountain road drive. In order to integrate the function of low and high beam into a single headlight without sacrifice of volumetric size of whole system, a DMD is employed in this optical design. Simulation shows that new optical design not only promotes light efficiency but also reduce volumetric size. Besides, light from adaptive automotive headlight system could make the projected light much suitable for drivers according to individual driver's vision experience. Results show that volumetric size of all system might be reduced up to 30 percent but light efficiency could be promoted up to 20 percent.

A high frame-rate compressive spectral video system is developed. The 4-dimensional targets (space, time and spectra) are captured by multi-spectral LED modulated illumination. The reflection of targets passing through an objective lens is modulated by a digital micro-mirror device (DMD) in the spatial domain, which is then collected by a RGB sensor through an imaging lens. The rapidly changing LED illumination patterns and DMD codings provide unique modulations for each temporal frame. Mathematical modeling and simulation are shown all as well as experimental results.

This paper presents our implementation of a multi-view autostereoscopic 3D display system by using time-multiplexing approach, digital micro-mirror devices (DMD), and the optical Wedgereg. The whole system consists of three major parts: high frame rate DMD projector, an active shutter, and an optical Wedgereg. This research investigates and develops the approaches to interface and control DMDs at very high bit rates and ultra-high frame rates to drive a novel flicker-free 3D flat panel device, with a wide viewing area and without need of special viewing glasses or head-tracking system. It needs to design a digital interface circuit capable of receiving video image data in a conventional format and translating it into a form appropriate for display on a DMD light modulator. This approach differs from existing ones in that it facilitates the modulation of the DMD to achieve much high frame rates, though with a trade-off in greyscale resolution. The outcomes of this research will have the great potential for commercialising the autostereoscopic display systems