Long‐time coherent integration based on intra‐partition range‐Doppler processing for passive bistatic radar

Long-time coherent integration using frequency hopping signals is a challenging problem for passive bistatic radar due to its frequency hopping characteristics. Apart from range walk, range curve, and Doppler frequency migration, Doppler diffusion caused by frequency hopping characteristics occurs within the observation time, which also lowers the detection performance. To deal with this problem, a novel coherent integration method for frequency hopping signals based on passive bistatic radar is proposed in this paper. In this novel method, range curve and range walk are eliminated by applying generalized Keystone transform. Then, Doppler frequency migration caused by the target's acceleration is compensated for by a parameter search with a designed search scope. Finally, Doppler frequency migration caused by frequency hopping characteristics is compensated for by designing a new acceleration compensation function and a revised rotation factor for Fourier transform. Since migration effects caused by frequency hopping characteristics are considered and compensated for when using frequency hopping signals, the weak target echo can be better integrated in the observation time compared to when using the existing methods. The simulation results and performance analysis illustrate the effectiveness of the proposed method.

Passive bistatic radar is a novel radar technology that passively detects targets without actively emitting signals. Since passive bistatic radar entails larger data volumes and computations compared to traditional active radiation radar, the development of hardware and software platforms capable of efficiently processing signals from passive bistatic radar has emerged as a research focus in this field. This research investigates the signal processing flow of passive bistatic radar based on its characteristics and devises a parallel signal processing scheme under graphic processing unit (GPU) architecture for computation-intensive tasks. The proposed scheme utilizes high-computing-power GPU as the hardware platform and compute unified device architecture (CUDA) as the software platform and optimizes the extensive cancellation algorithm batches (ECA-B), range Doppler and constant false alarm detection algorithms. The detection and tracking of a single target are realized on the passive bistatic radar dataset of natural scenarios, and experiments show that the design of this algorithm can achieve a maximum acceleration ratio of 113.13. Comparative experiments conducted with varying data volumes revealed that this method significantly enhances the signal processing rate for passive bistatic radar.

Long-time coherent integration can remarkably improve the detection and motion parameter estimation ability of radar for maneuvering targets. Unfortunately, the linear range migration, quadratic range migration (QRM), and Doppler frequency migration (DFM) within the coherent processing interval seriously degrade the target detection and parameter estimation performance. In this regard, a novel coherent integration approach based on frequency autocorrelation function (FAF) and Lv’s distribution (LVD), i.e., FAF–LVD, is proposed in this paper. The QRM is firstly removed by the second-order keystone transform. Then, the FAF with a variable delay is introduced to remove the DFM, followed by the scaled Fourier transform to achieve coherent integration. Finally, the acceleration and velocity are estimated simultaneously by LVD. Analysis demonstrates that FAF–LVD could be efficiently implemented via complex multiplications, the fast Fourier transform (FFT) and inverse FFT. Detailed comparisons with several representative methods indicate that FAF–LVD achieves a better balance among computational complexity, detection ability, and parameter estimation performance. Extensive simulations are presented to validate the effectiveness of FAF–LVD method.

This paper considers the coherent integration problem for a low-observable maneuvering target, where the velocity and acceleration result in range migration (RM) and Doppler frequency migration (DFM) within the coherent pulse interval. A novel method based on the frequency spectrum segment processing (FSSP) and the segmental Lv's distribution (SLVD) is proposed to realize the long-time coherent integration for multiple maneuvering targets. In this method, FSSP is proposed to eliminate the RM effect by dividing the received signal into several subband signals and expanding the range resolution of the subband signals. Then SLVD is applied to achieve the coherent integration of the subband signals and accumulate the energy of all the subband signals coherently. The proposed method can realize the coherent integration for multiple maneuvering targets without any prior knowledge of the targets' motion. The simulation and experimental results demonstrate the effectiveness of the proposed algorithm.

In recent years, target detection has drawn increasing attention in the field of radar signal processing. In this paper, we address the problem of coherent integration for detecting high-speed maneuvering targets, involving range migration (RM), quadratic RM (QRM), and Doppler frequency migration (DFM) within the coherent processing interval. We propose a novel coherent integration algorithm based on the frequency-domain second-order phase difference (FD-SoPD) approach. First, we use the FD-SoPD operation to reduce the signal from three to two dimensions and simultaneously eliminate the effects of QRM and DFM, which leads to signal-to-noise ratio improvement in the velocity-acceleration domain. Next, we estimate the target motion parameters from the peak position without the need for a search procedure. We show that this algorithm can be easily implemented by using complex multiplications combined with fast Fourier transform (FFT) and inverse FFT (IFFT) operations. We perform comparisons with several representative algorithms and show that the proposed technique can be used to achieve a good trade-off between computational complexity and detection performance. We present both simulated and experimental data to demonstrate the effectiveness of the proposed method.

Signal integration, as an effective method of detecting weak target, is widely used in areas of radar, sonar, etc. In previous studies of long-time coherent integration, researchers usually established a multi-pulse echo model with linear frequency modulation (LFM) signal due to its good compression performance and large Doppler tolerance. Then, perfect analytical formula can be deduced to compensate for range migration and Doppler spread, which is helpful in analyzing the mechanism of long-time coherent integration in depth. However, besides LFM, a wide variety of signal waveforms are also used in modern sonar and underwater guidance system to meet the requirements for diverse applications. For instance, continuous wave (CW) pulse is often used in signal detection, high resolution direction of arrival (DOA) estimation, and velocity estimation, while large time-bandwidth product waveforms such as modulated signal, coded signal, and pseudo-random signal are utilized for special tasks like anti-interference detection, channel matching, and active concealed detection. Therefore, the formulas and corresponding instructive conclusions deduced by LFM have no generality when other sonar waveforms are used in pulse integration. In this paper, we focus on long-time coherent integration for arbitrary signal reflected by underwater target moving with a uniform velocity and propose a motion-compensated coherent integration method for arbitrary complex envelop signal. A kind of general ambiguity function (GAF) for transmitted signal is defined to present a unified expression based on GAF for the output of the matched filter. The operation not only helps us to describe and calculate the pulse compression form of the arbitrary complex envelop by using a general mathematical model, but also provides information about the range migration and Doppler frequency shift of the multi-pulse echo, which is needed in pulse range alignment and FFT integration. For the matched filter output expressed by the GAF, Keystone transform is utilized to correct the complex envelop of the multi-pulse echo and eliminate the range walk. Then, Doppler frequency shift is compensated for by performing FFT transform, and the long-time coherent integration for arbitrary complex envelop is realized. To verify the correctness of the proposed method, we carry out the computer simulation on both signal integration and detection performance by using four sonar waveforms, i.e., CW signal, LFM signal, m-sequence phase-coded signal, and Costas frequency hop coded signal. The simulation results show that the proposed motion-compensated coherent integration method is applicable to arbitrary complex envelop signal. We also design an anechoic water tank experiment scheme which can successfully obtain the multi-pulse echoes of constant moving target. The motion-compensated coherent integration of the experimental data of the above-mentioned four waveforms further validates the effectiveness of the proposed method.

The multipath clutter cancellation, the most computationally demanding part of signal processing in passive bistatic radar (PBR), is a key challenge in real time processing. However the previous Extensive Cancellation Algorithm (ECA) versions have their limitations in parallel implementation. In this paper an advanced version of ECA is proposed for multipath clutter cancellation in passive radar. Validated by simulation and theoretical analysis, the proposed algorithm can improve the computation efficiency with an excellent cancelling capability, which provides a valuable basis for real time signal processing in PBR.

Passive coherent location (PCL), passive covert radar (PCR), passive bistatic radar (PBR), passive radar, parasitic radar, and hitchhiking radar are all common names for passive radar systems exploiting cooperative, noncooperative transmitters, or transmitters of opportunity, [1, pp. 3]. Recent review of the various names resulted in the compromise PBR, [2, pp. 248]. However, it should be noted that the PCL name is still being used for full systems like Lockheed Martin's - Silent Sentry [3], [4], Thales' - Homeland alerter 100 [5], [6] seen in Figure 1, and Airbus “Passive Radar” [7]–[15]. The PCL systems may be considered as systems of PBR systems. This work focuses on the system perspective of the technology, i.e. PCL, while relying on the technical depths of the PBR technology.

This letter considers the coherent integration problem for a maneuvering target, involving range migration (RM) and Doppler frequency migration (DFM) within one coherent pulse interval. A new coherent integration method, known as Radon-Lv's distribution (RLVD), is proposed. It can not only eliminate the RM effect via jointly searching in the target's motion parameters space, but also remove the DFM and achieve the coherent integration via Lv's distribution (LVD). Finally, several simulations are provided to demonstrate the effectiveness. The results show that for detection ability, the proposed method is superior to the moving target detection (MTD), Radon-Fourier transform (RFT), and Radon-fractional Fourier transform (RFRFT) under low signal-to-noise-ratio (SNR) environment.

High-speed, low-observable, and maneuvering target detection is always the difficult problem for the early warning and detection of space target, ballistic target, and passive radar signal processing. The high-order motion information of maneuvering target is employed in this paper, such as acceleration and jerk. Accordingly, several long-time coherent integration methods are demonstrated and illustrated, i.e., Radon-fractional Fourier transform (RFRFT), Radon fractional ambiguity function (RFRAF), Radon-linear canonical ambiguity function (RLCAF), and phase differentiation-Radon-Lv's distribution (PD-RLVD). These methods can compensate the across range unit (ARU) and Doppler frequency migration (DFM) effects simultaneously during the long-time integration. The background clutter and noise can be well suppressed with higher integration gain. Experimental results using real radar data show the superiority of the proposed methods.

This paper provides a detailed overview of the Digital Video Broadcasting Terrestrial (DVB-T) signal structure and the implications for passive radar systems that use these signals as illuminators of opportunity. In particular, we analyze the ambiguity function and explain its delay and Doppler properties in terms of the underlying structure of the DVB-T signal. Of particular concern for radar range-Doppler processing are ambiguities consistent in range and Doppler with targets of interest. In this paper we adopt a mismatched filtering approach for range-Doppler processing. We also recognize that while the structure of the DVB-T signal introduces ambiguities, the structure can also be exploited to better estimate the transmitted signal and channel, as well as any mismatch between transmitter and receiver (e.g., clock offsets). This study presents a scheme for pre-processing both the reference and surveillance signals obtained by the passive radar to mitigate the effects of the ambiguities and the clutter in range-Doppler processing. The effectiveness of our proposed scheme in enhancing target detection is demonstrated using real-world data from an (Australian) 8k-mode DVB-T system. A 29 dB reduction in residual ambiguity levels over existing techniques is observed, and a 36 dB reduction over standard matched filtering; with only a 1 dB reduction in the zero-delay, zero-Doppler peak.

Passive bistatic radars are an important batch of scout radars that use the signals of other independent transmitters as illuminators of opportunity. Cancellation of clutter and multipath is an important problem in these radars. This problem is exacerbated as the transmitter signal is not under the control of designer. In this paper, we propose a novel algorithm for clutter and multipath cancellation in the passive radars that called sequential cancellation algorithm-batch (SCA-B). Indeed, the SCA-B is a generalization of some recent algorithms such as the ECA, the SCA and the ECA-B that act based on projecting the received signals in a subspace orthogonal to both clutter and pre-detected targets. In this paper, the SCA-B algorithm use for static and non-static clutters cancellation. The SCA-B provides an admissible performance with low complexity.

This paper considers the coherent integration problem for maneuvering target detection and motion parameters estimation, involving range migration (RM) and Doppler frequency migration (DFM) within the coherent pulse interval. A fast non-searching method based on adjacent cross correlation function (ACCF) and Lv's distribution (LVD) is proposed, where the adjacent correlation operation is first employed to remove the RM and reduce the order of DFM. After that, LVD is applied to realize the coherent integration, target detection and parameters estimation. In addition, at the cost of some performance loss, another fast method via ACCF iteratively is also introduced to further reduce the computational complexity and obtain the motion parameters estimation. The proposed two methods are fast in that they can be easily implemented by using complex multiplications, the fast Fourier transform (FFT) and inverse FFT (IFFT). Compared with the existing methods, the presented algorithms can obtain the motion parameters estimation without any searching procedure and can achieve a good balance between the computational cost and the detection ability as well as parameters estimation performance. Finally, several simulation experiments are provided to demonstrate the effectiveness.

This study considers the coherent integration problem for detecting a manoeuvring target, involving range migration (RM) and Doppler frequency migration (DFM) within the coherent processing interval. An efficient coherent integration method based on keystone transform (KT) and Lv's distribution (LVD) is proposed. It can not only correct the RM effect by KT and fold factor phase compensation, but also remove the DFM effect and achieve the coherent accumulation via LVD. Compared with the moving target detection, Radon‐Fourier transform, and Radon‐fractional Fourier transform algorithms, the proposed method can obtain better detection ability under low signal‐to‐noise ratio environment. Finally, several simulations are provided to demonstrate the effectiveness.

Passive Bistatic Radar (PBR), or Passive Coherent Location, is gaining interest in the radar community as it provides some advantages with respect to active radar. Although, passive radar does not aim to replace active radar, it provides a good complement to it. The computational effort that is required to implement the required signal processing is one of the drawbacks that affect passive radar. In this paper a computationally affordable algorithm is proposed and its performance tested by using a numerical simulation. (4 pages)