Loss‐of‐field detection in synchronous generators using decision tree technique

The role of decision trees in software development effort estimation (SDEE) has received increased attention across several disciplines in recent years thanks to their power of predicting, their ease of use, and understanding. Furthermore, there are a large number of published studies that investigated the use of a decision tree (DT) techniques in SDEE. Nevertheless, in reviewing the literature, a systematic literature review (SLR) that assesses the evidence stated on DT techniques is still lacking. The main issues addressed in this paper have been divided into five parts: prediction accuracy, performance comparison, suitable conditions of prediction, the effect of the methods employed in association with DT techniques, and DT tools. To carry out this SLR, we performed an automatic search over five digital libraries for studies published between 1985 and 2019. In general, the results of this SLR revealed that most DT methods outperform many techniques and show an improvement in accuracy when combined with association rules (AR), fuzzy logic (FL), and bagging. Additionally, it has been observed a limited use of DT tools: it is therefore suggested for researchers to develop more DT tools to promote the industrial utilization of DT amongst professionals.

This study focuses on predicting which firms will increase capital by issuing new stocks in the near future. Many stakeholders, including banks, credit rating agencies and investors, performs a variety of analyses for firms' growth, profitability, stability, activity, productivity, etc., and regularly report the firms' financial analysis indices. In the paper, we develop predictive models for rights issues using these financial analysis indices and data mining techniques. This study approaches to building the predictive models from the perspective of two different analyses. The first is the analysis period. We divide the analysis period into before and after the IMF financial crisis, and examine whether there is the difference between the two periods. The second is the prediction time. In order to predict when firms increase capital by issuing new stocks, the prediction time is categorized as one year, two years and three years later. Therefore Total six prediction models are developed and analyzed. In this paper, we employ the decision tree technique to build the prediction models for rights issues. The decision tree is the most widely used prediction method which builds decision trees to label or categorize cases into a set of known classes. In contrast to neural networks, logistic regression and SVM, decision tree techniques are well suited for high-dimensional applications and have strong explanation capabilities. There are well-known decision tree induction algorithms such as CHAID, CART, QUEST, C5.0, etc. Among them, we use C5.0 algorithm which is the most recently developed algorithm and yields performance better than other algorithms. We obtained data for the rights issue and financial analysis from TS2000 of Korea Listed Companies Association. A record of financial analysis data is consisted of 89 variables which include 9 growth indices, 30 profitability indices, 23 stability indices, 6 activity indices and 8 productivity indices. For the model building and test, we used 10,925 financial analysis data of total 658 listed firms. PASW Modeler 13 was used to build C5.0 decision trees for the six prediction models. Total 84 variables among financial analysis data are selected as the input variables of each model, and the rights issue status (issued or not issued) is defined as the output variable. To develop prediction models using C5.0 node (Node Options: Output type = Rule set, Use boosting = false, Cross-validate = false, Mode = Simple, Favor = Generality), we used 60% of data for model building and 40% of data for model test. The results of experimental analysis show that the prediction accuracies of data after the IMF financial crisis (59.04% to 60.43%) are about 10 percent higher than ones before IMF financial crisis (68.78% to 71.41%). These results indicate that since the IMF financial crisis, the reliability of financial analysis indices has increased and the firm intention of rights issue has been more obvious. The experiment results also show that the stability-related indices have a major impact on conducting rights issue in the case of short-term prediction. On the other hand, the long-term prediction of conducting rights issue is affected by financial analysis indices on profitability, stability, activity and productivity. All the prediction models include the industry code as one of significant variables. This means that companies in different types of industries show their different types of patterns for rights issue. We conclude that it is desirable for stakeholders to take into account stability-related indices and more various financial analysis indices for short-term prediction and long-term prediction, respectively. The current study has several limitations. First, we need to compare the differences in accuracy by using different data mining techniques such as neural networks, logistic regression and SVM. Second, we are required to develop and to evaluate new prediction models including variables which research in the theory of capital structure has mentioned about the relevance to rights issue.

<div>As pedestrians are among the most critical road users, this research analyzes their vulnerability characteristics and predicts the injury severity of pedestrian crashes through decision tree techniques, rather than using statistical regression models that have particular predefined causal relationships between dependent and independent variables. Five years have been studied in Nablus Governorate/Province (2012–2016), one of 16 governorates in Palestine, as a case study based on reported crash frequencies for developing countries. Tree techniques (CART [Classification and Regression Tree] and CHAID [Chi-Square Automatic Interaction Detector]) were applied to extract the main impacting factors on injury severity for pedestrian crashes. The main contributions considered a small regional context in developing countries and found differences between the results of various methods in injury severity. Fourteen independent variables have been analyzed. A CART model with Gini splitting has produced the most accurate model. The most important variables were the victim’s gender, followed by area classification as rural, and the age categories of pedestrians older than 65 and younger than 15 years. The least important variables were found to be the driver’s gender, land use, and pavement conditions. Results also showed that the proximity of crashes to schools is relatively high; therefore, some policies were suggested regarding children’s awareness, school zones, and driver behavior. It was found that the majority of factors influencing pedestrian crashes are related to human characteristics such as age, gender, or attitude whereas, in developed countries, they were related to vehicles and infrastructure. Based on the results of the study, tree techniques were considered effective in the analysis of injury severity of pedestrians in the context of developing countries to identify the main factors of vulnerability.</div>

Human resource is one of the functions of a company that is considered as an asset. Therefo re, the theory of performance qualificat ion was adopted by the company in order to get an overview of employee performance. Furthermore, the company needs an effective method to predict the performance not only for the employees but also for the new applic ants. The goals of this research are to get a decision tree model of the employee performance. By learning employee data, the performance of the new applicants could be predicted. The study would provide the characteristic of new applicants who will give better performance than other applicants . The data from a company in Indonesia will have been used for this research. The data mining technique will be applied to the data of operators (such as admins, clerks, cashiers, machine operators, and security offi cers). The data mining technique was use d is decision tree. The decision tree technique was commonly used for a supervised learning data. The decision tree technique also has advantages compared others, because of its ability to produce information that is easy to understand. The result of this research shown the high dependency of employee performance with employment type (work contract). It also means that employees are encouraged to provide good performance to the company if those employees have become p ermanent employees. This research also showed that there is no relationship between employee performances with gender or position grade.

Heart failure is a complex condition with a significant impact on patients' lives. A few studies have identified risk factors associated with rehospitalization among telehomecare patients with heart failure using logistic regression or survival analysis models. To date, there are no published studies that have used data mining techniques to detect associations with rehospitalizations among telehomecare patients with heart failure. This study is a secondary analysis of the home healthcare electronic medical record called the Outcome and Assessment Information Set-C for 552 telemonitored heart failure patients. Bivariate analyses using SAS and a decision tree technique using Waikato Environment for Knowledge Analysis were used. From the decision tree technique, the presence of skin issues was identified as the top predictor of rehospitalization that could be identified during the start of care assessment, followed by patient's living situation, patient's overall health status, severe pain experiences, frequency of activity-limiting pain, and total number of anticipated therapy visits combined. Examining risk factors for rehospitalization from the Outcome and Assessment Information Set-C database using a decision tree approach among a cohort of telehomecare patients provided a broad understanding of the characteristics of patients who are appropriate for the use of telehomecare or who need additional supports.

• Introduces a novel method using Hilbert-Huang Transform (HHT) with LSTM networks for fault detection in DC microgrids. • Targets marine and satellite DC microgrids, addressing challenges with no zero-crossing points in traditional methods. • Demonstrates superior performance, outperforming SVM and Decision Tree techniques in fault detection time and accuracy. • Validates the method using MATLAB/Simulink, effectively detecting faults with resistance up to 1.3 ohms. • Ensures compliance with IEEE 8570 standards, enhancing reliability and applicability in real-world microgrid systems. Fault detection in DC microgrids is a major challenge because traditional protection methods like wavelet and Fourier transforms rely on zero-crossing points, which the DC signal lacks. This paper introduces a new approach combining the Hilbert-Huang Transform (HHT) and a long short-term memory (LSTM) neural network to improve fault detection and classification in DC microgrids. The proposed method first uses Empirical Mode Decomposition (EMD) to break down the fault current signal into multiple intrinsic mode function (IMFs). These IMFs capture important fault-related information at different frequency levels. Next, the Hilbert Transform is applied to these IMFs to obtain amplitude and frequency features over time. These features are used to create a set of numerical descriptors that summarize the fault characteristics. These extracted features are then fed into a two-layer LSTM neural network that can learn patterns in time-series data. The LSTM model is trained to classify the input into three categories: no fault, Pole-Ground (P-G) Fault, or Pole-Pole (P-P) Fault. Simulation tests were carried out using a MATLAB Simulink model of a 20kWatt DC microgrid under different fault conditions, noise levels, and load transients. Results show that the proposed HHT-LSTM model detects faults faster and more accurately than conventional techniques like Support Vector Machines (SVM) and Decision Trees (DT). It also meets the fault detection time requirements set by IEEE8570 and aligns with IEC standards. The model remains robust even under noisy conditions, making it reliable for real-time fault protection in marine, satellite, and an effective solution for enhancing fault detection in modern DC microgrids.

Decision trees are considered as one of the efficient classification techniques in data mining fields. But the standard decision trees are unfit to cope with data pervaded with uncertainty both at the construction and classification phase. Dempster-Shafer theory offers an alternative to traditional probabilistic theory for the mathematical representation of uncertainty. This paper added new aggregation combination operator and uncertainty measure operator into general framework for data mining based on evidence theory. Combining these two operators with decision tree and multidimensional cube, decision tree technique can be extended to uncertain environment. In the phase of node splitting, this algorithm can pre-prune the decision tree and generate a decision tree with fewer branches. Simulations have shown the effectiveness of this method.

Gene expression information from microarray experiments is a primary form of data for biological analysis and can offer insights into disease processes and cellular behaviour. Such datasets are particularly challenging to build classifiers for, due to their very high dimensional nature and small sample size. Decision trees are a seemingly attractive technique for this domain, due to their easily interpretable white box nature and noise resistance. However, existing decision tree methods tend to perform rather poorly for classifying gene expression data. To address this gap, we introduce a new technique for building decision trees that is better suited to this scenario. Our method is based on consideration of the area under the Receiver Operating Characteristics (ROC) curve, to help determine decision tree characteristics, such as node selection and stopping criteria. We experimentally compare our algorithm, called ROC-tree, against other well known decision tree techniques, on a number of gene expression datasets. The experimental results clearly demonstrate that ROC-tree can deliver better classification accuracy in a range of challenging situations.

While decision tree techniques have been widely used in classification applications, a shortcoming of many decision tree inducers is that they do not learn intermediate concepts, i.e., at each node, only one of the original features is involved in the branching decision. Combining other classification methods, which learn intermediate concepts, with decision tree inducers can produce more flexible decision boundaries that separate different classes, potentially improving classification accuracy. We propose a generic algorithm for cascade generalization of decision tree inducers with the maximum cascading depth as a parameter to constrain the degree of cascading. Cascading methods proposed in the past, i.e., loose coupling and tight coupling, are strictly special cases of this new algorithm. We have empirically evaluated the proposed algorithm using logistic regression and C4.5 as base inducers on 32 UCI data sets and found that neither loose coupling nor tight coupling is always the best cascading strategy and that the maximum cascading depth in the proposed algorithm can be tuned for better classification accuracy. We have also empirically compared the proposed algorithm and ensemble methods such as bagging and boosting and found that the proposed algorithm performs marginally better than bagging and boosting on the average.

Prediction of suicidal ideation in shift workers compared to non-shift workers using machine learning techniques

Slope failure prediction using a decision tree: A case of engineered slopes in South Korea

Decision trees are versatile machine learning algorithms that are frequently used in classification and regression tasks. In this work, decision trees are employed as tools for sediment classification using sound waves propagating in the ocean and their behavior and features. We first analyze the structure of received time series at deployed hydrophones, extracting characteristic features (kurtosis and skewness, for example). Feature values then form vectors that are used as input patterns to the trees. A training step is the first stage of the machine learning approach with the trees trained to recognize sediment types based on feature values. The method is subsequently tested on feature vectors obtained from noise-corrupted time series. The performance depends on Signal-to-Noise Ratio values as expected and the method is found to be superior to conventional machine learning approaches. The addition of tools such as principal component analysis as well as spectrogram processing and time-frequency curve fitting further enhances the method. The decision tree technique provides an effective and efficient solution to the problem of sediment classification using acoustic data. [Work supported by ONR.]

A quantum machine is a human-made device whose collective motion follows the laws of quantum mechanics. Quantum machine learning (QML) is machine learning for quantum computers. The availability of quantum processors has led to practical applications of QML algorithms in the remote sensing field. Quantum machines can learn from fewer data than non-quantum machines, but because of their low processing speed, quantum machines cannot be applied to an image that has hundreds of thousands of pixels. Researchers around the world are exploring applications for QML and in this work, it is applied for pseudo-labelling of samples. Here, a PRISMA (PRecursore IperSpettrale della Missione Applicativa) hyperspectral dataset is prepared by quantum-based pseudo-labelling and 11 different machine learning algorithms viz., support vector machine (SVM), K-nearest neighbour (KNN), random forest (RF), light gradient boosting machine (LGBM), XGBoost, support vector classifier (SVC) + decision tree (DT), RF + SVC, RF + DT, XGBoost + SVC, XGBoost + DT, and XGBoost + RF with this dataset are evaluated. An accuracy of 86% was obtained for the classification of pine trees using the hybrid XGBoost + decision tree technique.

In this study, the decision tree (DT) technique is developed to assess the basketball strategies' training impact on physical education (PE). The recommended DT method effectively guesses the tactics of two teams based on the locations of basketball players with only a small amount of training data. Next, using data concerning ball possession, the interaction of these teams' tactics, and the distinctive features of basketball strategies, the DT approach changes the team's strategies.Therefore, effective findings from prediction could be produced because the suggested DT approach predicts the team strategies that meet these requirements. The suggested DT approach is implemented using the Python platform to analyze efficiency in terms of several metrics. Additionally, the DT method's effectiveness is contrasted with that of other approaches. Based on the results of the experiments, the suggested approach outperforms the current approaches in assessing the impact of basketball strategy instruction in physical education.

A fuzzy decision tree method for fault classification in the steam generator of a pressurized water reactor