Lossless Compression Algorithm for Energy Efficient Wireless Sensor Network

A new hierarchical belief-rule-based method for reliability evaluation of wireless sensor network

A wireless sensor network (WSN) (singular and plural of acronyms are spelled the same) is a distributed system composed of autonomous sensor nodes wireless connected and randomly scattered into a geographical area to cooperatively monitor physical or environmental conditions. Adequate techniques and strategies are required to manage a WSN so that it works properly, observing specific quantities and metrics to evaluate the WSN operational conditions. Among them, one of the most important is the reliability. Considering a WSN as a system composed of sensor nodes the system reliability approach can be applied, thus expressing the WSN reliability in terms of its nodes' reliability. More specifically, since often standby power management policies are applied at node level and interferences among nodes may arise, a WSN can be considered as a dynamic system. In this article we therefore consider the WSN reliability evaluation problem from the dynamic system reliability perspective. Static–structural interactions are specified by the WSN topology. Sleep/wake-up standby policies and interferences due to wireless communications can be instead considered as dynamic aspects. Thus, in order to represent and to evaluate the WSN reliability, we use dynamic reliability block diagrams and Petri nets. The proposed technique allows to overcome the limits of Markov models when considering non-linear discharge processes, since they cannot adequately represent the aging processes. In order to demonstrate the effectiveness of the technique, we investigate some specific WSN network topologies, providing guidelines for their representation and evaluation.

WITHDRAWN: Developing a software reliability evaluation model for wireless sensor networks based on analysis of software fault growth

This paper presents the design of wireless sensor network (WSN) based on low-power wide area network technology for high-tech agriculture. This WSN allows the farmer to collect data such as air temperature, air humidity, soil moisture. The WSN system consists of components: 02 wireless sensor nodes, 01 gateway, 01 cloud server and smartphone app. This WSN tested for data transmission in two zones: zone 1 (dense urban environments) at a distance of 500m and zone 2 (urban environments - less obstacles) at a distance of 1,500m and 1,700m. The data collected at different times of the day and updated every 15 minutes. The results show that the wireless sensor network system operates stably, data constantly updated to LoRa Server and there was not data packet loss. The power consumption of sensor node and gateway determined in three operating modes: transmitting, receiving, turn-off. This shows the advantages of LoRa technology in the development of wireless sensor network which is the distance of data transmission distance and low power consumption. Besides this WSN also tested in the net house of aquaponics of the Research Center for High-tech Application in Agriculture (RCHAA), University of Science, Vietnam National University-HCM. The results show that the WSN system is working reliably and promising which brings significantly benefits to smart agriculture as aquaponics, clean vegetable farms, aquaculture farms…

In this paper we consider the problem of modeling and evaluating the infrastructure communication reliability (ICR) of wireless sensor networks (WSN). Our approach is progressive and based on reduced ordered binary decision diagrams (ROBDD). Due to the nature of the ROBDD and the reduction scheme used in the progressive process, the approach is computationally efficient and is easy to implement. We also incorporate the consideration of common cause failures (CCF) into the reliability analysis of WSN. We illustrate the application and advantages of our approach by working through the analysis of an example WSN

Design of reliable wireless sensor network (WSN) needs to address the failure of single or multiple network components and implementation of the techniques to tolerate the faults occurred at various levels. The issues and requirements of reliability improvement mechanism depend on the available resources and application for which the WSN is deployed. This paper discusses the different modeling approaches to evaluate the reliability and classification of the approaches to improve it. Also the paper analyzes reliability enhancement by existing fault tolerant methods in WSN and compares the performance of these techniques with the technique we developed. From the results of the analysis we highlight the challenges and the characteristics of the sensor network affects the reliability and give some scope of future research directions in order to enhance reliability.

Data reliability in Wireless Sensor Networks (WSNs) has a substantial influence on their smooth functioning and resource limitations. In a WSN, the data aggregated from clustered sensor nodes are forwarded to the base station for analysis. Anomaly Detection (AD) focuses on detecting outlier data to ensure consistency during data aggregation. As WSNs have critical resource limitations concerning energy consumption and sensor node lifetime, AD is supposed to provide data integrity with minimum energy consumption, which has been an active research problem. Hence, researchers are striving for methods to improve the accuracy of data handled with a concern on the constraints of WSNs. This paper introduces a Feed-forward Autoencoder Neural Network (FANN) model to detect abnormal instances with improved accuracy and reduced energy consumption. The proposed model also acts as a False Positive Reducer intending to reduce false alarms. It has been compared with the other dominant unsupervised algorithms over robustness and other significant metrics with real-time datasets. Relatively, our proposed model yields an improved accuracy with fewer false alarms thereby supporting a sustainable WSN.

In recent times, the medical image processing solves several clinical issues by inspecting the visual images, which are generated in the clinical health care units. The main objective of the research is to gain valuable information from the images for better clinical diagnosis. In the biomedical engineering domain, the medical image analysis is an emerging research topic. In the recent decades, the use of medical images is highly growing, which are acquired from different image modalities; so, there is a necessity for data compression for transmission, storage, and management of digital medical image datasets. Hence, the machine learning methods are effective for medical image analysis, where the deep learning models are used in the machine learning tools for automatically learning the feature vectors from the huge medical datasets. The automated deep learning models are effective compared to the conventional handcrafted features. In addition to this, a wireless sensor network (WSN) is used to create a primary health care scheme, which brings patient data together and expands the medical conveniences, whereas the WSN design must comprise of sensor nodes, because it consumes less power and resources at a relatively low cost; so, it is essential for implementing the Raspberry Pi-based WSN nodes. The sensor nodes are important for limited battery capacity and to transmit the vast amount of medical data. The proposed work is broadly classified into two categories such as (i) the medical image compression algorithm is developed using the deep learning model based on autoencoders and restricted Boltzmann machines (RBM) and (ii) implementation of the WSN sensors nodes with Raspberry Pi and Messaging Queue Telemetry Transport (MQTT) Internet of Things (IoT) protocol for secure transmission of the medical images. The experimental results are evaluated using the standard performance metrics like peak signal to noise ratio (PSNR) and presented a Real-Time Linux (RTL) implementation of the design. The proposed model showed 10 dB to 15 dB improvement in the PSNR value, while transmitting the medical images, which is better compared to the existing model.

For the past few years, centralized decision-making is being used for malicious node identification in wireless sensor networks (WSNs). Generally, WSN is the primary technology used to support operations, and security issues are becoming progressively worse. In order to detect malicious nodes in WSN, a blockchain-routing- and trust-model-based jellyfish search optimizer (BCR-TM-JSO) is created. Additionally, it provides the complete trust-model architecture before creating the blockchain data structure that is used to identify malicious nodes. For further analysis, sensor nodes in a WSN collect environmental data and communicate them to the cluster heads (CHs). JSO is created to address this issue by replacing CHs with regular nodes based on the maximum remaining energy, degree, and closeness to base station. Moreover, the Rivest–Shamir–Adleman (RSA) mechanism provides an asymmetric key, which is exploited for securing data transmission. The simulation outcomes show that the proposed BCR-TM-JSO model is capable of identifying malicious nodes in WSNs. Furthermore, the proposed BCR-TM-JSO method outperformed the conventional blockchain-based secure routing and trust management (BSRTM) and distance degree residual-energy-based low-energy adaptive clustering hierarchy (DDR-LEACH), in terms of throughput (5.89 Mbps), residual energy (0.079 J), and packet-delivery ratio (89.29%).

Using wireless sensor networks (WSNs) in delay and reliability critical environments is highly desired due to their unique advantages such as low cost, ease of deployment, and redundancy. However, successful deployment of resource-limited WSNs in such applications requires strict quality-of-service (QoS) provisioning techniques to meet the desired latency and reliability targets of those applications. Implementation of QoS techniques in WSNs is significantly challenging since WSNs have been initially devised for low-data-rate non-real-time applications. Therefore, WSN designers and developers resort to different cross-layer interaction and optimization techniques to provision QoS in WSNs. In this paper, we present a survey on the state of the art of cross-layer QoS approaches in wireless terrestrial sensor networks to achieve delay and reliability bounds in critical applications. Our paper provides a unique classification of cross-layer QoS approaches in WSNs that allows surveying a large amount of studies with utmost clarity. Furthermore, we highlight the main challenges of implementing QoS protocols in WSNs and present an overview of QoS-aware WSN applications.

A scheme for WSNs (wireless sensor networks) security is given by dividing sensing tetrahedron into clusters and using the symmetric polynomials in this paper.The sensing tetrahedron is divided into a number of small grids.All those sensor nodes, both ordinary sensor nodes and heterogeneous sensor nodes are distributed in the sensing tetrahedron.In a grid, all ordinary sensor nodes and heterogeneous sensor nodes establish their shared keys through using the symmetric polynomials.All the heterogeneous sensor nodes establish their shared keys through using the symmetric polynomials.At last, all sensor nodes establish their keys directly or indirectly in the whole sensing tetrahedron.Analysis and comparison demonstrate this scheme enhances the WSN security, has good network connectivity, saves node storage, reduces network computing load, and extends the network lifetime.

In this article, we consider a stochastic model of wireless sensor networks (WSNs) in which each sensor node randomly and alternatively stays in an active mode or a sleep mode. The active mode consists of two phases, called the full-active phase and the semi-active phase. When a referenced sensor node is in the full-active phase of the active mode, it may sense data packets, transmit the sensed packets, receive packets, and relay the received packets. However, when the phase of the sensor node switches from the full active phase to the semi-active phase, it is only able to transmit/relay data. When the referenced sensor node is in a sleep mode, it does not interact with the external world. In this article, first, we develop a stochastic model for the sensor node of a WSN, and then we derive an explicit expression of the stationary distribution of the number of data packets in the sensor node. Furthermore, we figure out some important performance measures, including the sensor node’s energy consumption for transmission, the energy consumption of the sensor operations, and the average energy consumption of the sensor node in a cycle of active and sleep modes. Also, a numerical analysis is provided to validate the proposed model and the results obtained. The novel aspects of our research are the development of a stochastic model for WSN with active and sleep features and the development of important analytical formulae for evaluating the energy consumption of a WSN. These results are expected to be useful as significant contributions to the fundamental theory of the design of various WSNs with active and sleep mode considerations.

The single-channel wireless sensor networks (WSNs) exists the problem of low efficiency of monitoring data transmission, however the multi-channel WSNs exists the problem of communication collision caused by the sensor node’s wireless channel competition. The paper at first introduces the causes of the above problems and selects a reasonable wireless channel resources allocation method of the multi-channel WSNs. Then to solve these questions, the theory of compressive sensing and spectrum sensing are adopted to improve the existing multi-channel WSNs. Finally, a new sensor node of the multi-channel WSNs is designed based on the above improvement. By analyzing the monitoring data of the field test, the improved multi-channel WSNs could complete monitoring mission efficiently and accurately, meanwhile it reduced power consumption of the WSNs effectively.

One important issue in wireless sensor networks is how to gather sensed information in an energy efficient way since the energy is a scarce resource in a sensor node. Many protocols have been proposed for data-gathering between wireless sensor nodes. However, most of these protocols work on static wireless sensor networks. In this paper, we provide clustering-based and time-driven protocols which minimize energy dissipation for data-gathering in wireless mobile sensor networks where the sensor nodes are capable of mobility. We first consider the node mobility when organizing clusters. Our protocols will have a sensor node select a proper cluster-head to join in order to save energy. We then consider how to elect the cluster-heads and provide two algorithms for cluster-head election. Last, we implement all the protocols and perform the experiments for evaluating the protocols.

Wireless sensor node is an autonomous and compact device that has capability to monitor a variety of real-world phenomena. It is designed composed of sensing device, embedded processor, communication module, and power equipment. Wireless sensor node is part of wireless sensor network where hundred or thousand sensor node can be deployed. Over the past decade Wireless Sensor Networks (WSNs) have emerged as one of the computing platforms of note within the electronics community. In prediction, there will be more than 127 million wireless sensor nodes deployed worldwide by 2014. We have surveyed 100 currently available wireless sensor network node platforms have been developed and produced not only by the research institutions, the universities but also some companies in last ten years. In this paper, we present a review of 27 different wireless sensor node platforms. We review these devices under a number of different parameters, and we highlight the key advantages of each node platform according to dimension and power consumption. We also discuss the characteristics and trend of development and deployment a wireless sensor node technology.