• Home
  • Search
  • <title>Strength of indium-phosphide-based microstructures</title>
  • Cite Icon10
  • https://doi.org/10.1117/12.271420Copy DOI Icon

<title>Strength of indium-phosphide-based microstructures</title>

  • Abstract
  • Literature Map
  • Citations
  • Similar Papers
Abstract

Microoptoelectromechanical (MOEMS) systems with InP based micromechanics are proposed for devices with wide tuning ranges in the optical wavelengths where InP optoelectronics are normally used. To evaluate if these InP based micromechanical structures may be strong enough the mechanical strengths of surface micromachined epitaxial InP micro beams are evaluated. Reactive ion etching (RIE) with CH4:H2:H2Ar is used to structure the beams. A sacrificial InGaAs layer is below the InP microstructures and selectively etched by HCl:H2O2:H2O in ratios 1:1:10 to release the InP beams. Sublimation of tert-butanol is used to dry the micro structures. The RIE conditions are shown to be of large importance, since the induced surface defects are here the dominant reasons for fracture. Bending strength values up to 3.1 GPa were measured, i.e. much higher than for the strongest construction steel. Weibull statistics show that it is possible to make micromachines for typical MOEMS applications with acceptable loss in yield due to fracture probability, i.e. with a fracture probability of 0.0001 for 100 MPa maximum bending stress.© (1997) COPYRIGHT SPIE--The International Society for Optical Engineering. Downloading of the abstract is permitted for personal use only.

Similar Papers
  • Research Article
  • Citations13

Fabrication of nonspherical colloidal particles via reactive ion etching of surface-patterned colloidal crystals

  • Dec 06, 2005
  • Colloids and Surfaces A: Physicochemical and Engineering Aspects
  • Yuebing Zheng +3
  • Research Article
  • Citations12

Reactive ion etching of ZnSe by gas mixture of ethane and hydrogen

  • Jun 15, 1992
  • Applied Physics Letters
  • K Ohtsuka +4
  • Research Article
  • Citations13

Thermal stability of dry etch damage in SiC

  • May 20, 1996
  • Applied Physics Letters
  • S J Pearton +4
  • Research Article
  • Citations9

Broadband antireflective silicon carbide surface produced by cost-effective method

  • Jul 19, 2013
  • Optical Materials Express
  • Aikaterini Argyraki +2
  • Research Article

Study of Ion-Induced Secondary Photon Emission in Reactive Ion Etching Experiment

  • Jul 01, 1997
  • Japanese Journal of Applied Physics
  • Stanislav A Moshkalyov +2
  • Research Article
  • Citations2

Advanced antireflective nanostructures etched down from nanosilver colloid-transformed island mask

  • Jul 31, 2012
  • Optics Communications
  • Seong-Je Park +5
  • Research Article
  • Citations2

Mass Spectrometric Studies of Ions Produced in Halofluorocarbon Plasma Etching of Silicon and Silicon Dioxide

  • Jan 01, 1988
  • MRS Proceedings
  • E Occhiello +2
  • Research Article
  • Citations15

Plasma-induced damage of GaAs during etching of refractory metal contacts

  • May 01, 1995
  • Journal of Vacuum Science & Technology A: Vacuum, Surfaces, and Films
  • R J Shul +7
  • Research Article
  • Citations3

Plasma etching of InGaP, AlInP and AlGaP in BCl 3 environments

  • Nov 01, 1996
  • Materials Science & Engineering B
  • J Hong +6
  • Conference Article
  • Citations2

Nano-size structure formation on Si substrate for optical device application

  • Oct 01, 2012
  • Daeyoung Kong +4
  • Conference Article
  • Citations1

Fabrication of vertically coupled InP microdisk resonators by using smooth, CH/sub 4/-based reactive ion etching methods

  • Nov 12, 2001
  • Seung June Choi +3
  • PDF
  • Research Article
  • Citations13

In-Plane Optical Beam Collimation Using a Three-Dimensional Curved MEMS Mirror †

  • Apr 25, 2017
  • Micromachines
  • Yasser M Sabry +3
  • Research Article
  • Citations3

Fabrication of size-tunable Cr nanodots and nanorings array by modified nanosphere lithography

  • Oct 01, 2012
  • Micro & Nano Letters
  • Hung-Chun Wu +3
  • Research Article
  • Citations2

PLASMA PARAMETERS AND COMPOSITION IN CF4 + O2 + Ar AND CHF3 + O2 +Ar IN REACTIVE ION ETCHING PROCESSES

  • Dec 08, 2019
  • IZVESTIYA VYSSHIKH UCHEBNYKH ZAVEDENII KHIMIYA KHIMICHESKAYA TEKHNOLOGIYA
  • Alexander M Efremov +3
  • Research Article
  • Citations19

Effective SERS-active substrates composed of hierarchical micro/nanostructured arrays based on reactive ion etching and colloidal masks

  • Aug 30, 2016
  • Nanotechnology
  • Honghua Zhang +6
Cactus Communications logo

Copyright 2026 Cactus Communications. All rights reserved.