• Home
  • Search
  • M3C2-EP: Pushing the limits of 3D topographic point cloud change detection by error propagation [Data and Source Code
  • Cite Icon1
  • https://doi.org/10.11588/data/xhyb10Copy DOI Icon

M3C2-EP: Pushing the limits of 3D topographic point cloud change detection by error propagation [Data and Source Code

Show More
  • Abstract
  • Literature Map
  • Citations
  • Similar Papers
Abstract

The analysis of topographic time series is often based on bitemporal change detection and quantification. For 3D point clouds, acquired using laser scanning or photogrammetry, random and systematic noise has to be separated from the signal of surface change by determining the minimum detectable change. To analyse geomorphic change in point cloud data, the multiscale model-to-model cloud comparison (M3C2) approach is commonly applied, which provides a statistical significance test. This test assumes planar surfaces and a uniform registration error. For natural surfaces, the planarity assumption does not necessarily apply, in which cases the value of minimal detectable change (Level of Detection) is overestimated. To overcome these limitations, we quantify an uncertainty information for each 3D point by propagating the uncertainty of the measurements themselves and of the alignment uncertainty to the 3D points. This allows the calculation of 3D covariance information for the point cloud, which we use in an extended statistical test for equality of multivariate means. Our method, called M3C2-EP, gives a less biased estimate of the Level of Detection, allowing a more appropriate significance threshold in typical cases. We verify our method in two simulated scenarios, and apply it to a time series of terrestrial laser scans of a rock glacier at two different timespans of three weeks and one year. Over the three-week period, we detect significant change at 12.5% fewer 3D locations, while quantifying additional 25.2% of change volume, when compared to the reference method of M3C2. Compared with manual assessment, M3C2-EP achieves a specificity of 0.97, where M3C2 reaches 0.86 for the one year timespan, while sensitivity drops from 0.72 for M3C2 to 0.60 for M3C2-EP. Lower Levels of Detection enable the analysis of high-frequency monitoring data, where usually less change has occurred between successive scans, and where change is small compared to local roughness. Our method further allows the combination of data from multiple scan positions or data sources with different levels of uncertainty. The combination using error propagation ensures that every dataset is used to its full potential. <br/> --- <br/> This dataset includes three point clouds acquired by terrestrial laser scanning in 2017 and 2018, as well as alignment information (ICPout) and the code used for processing the datasets. Unzipping all the folders to the same directory should allow you to run the python script as-is. <br/> Point clouds have been pre-processed using the following workflow: <br/> 1) MSA coregistration within every epoch using RiScan Pro v2.7 <br/> 2) MSA coregistration within across epochs on stable areas using RiScan Pro v2.7 <br/> 3) ICP coregistration in opalsICP v2.3.1, resulting in the data in ICPout <br/> 4) Point cloud filterting using PDAL v2.2.0 ("filters.pmf") <br/> 5) Tiling into 100m tiles (5m overlap) using lastile <br/>

Similar Papers
  • Research Article
  • Citations12

Combination of geophysical and geotechnical data using belief functions: Assessment with numerical and laboratory data

  • Jul 22, 2019
  • Journal of Applied Geophysics
  • T Dezert +3
  • Research Article
  • Citations13

An Assessment Method for Project Cash Flow under Interval-Valued Fuzzy Environment

  • Apr 01, 2017
  • Journal of Optimization in Industrial Engineering
  • Vahid Mohagheghi +2
  • Conference Article
  • Citations7

<title>Handling spatio-temporal uncertainties of geo-objects for dynamic update of GIS databases from multisource data</title>

  • Aug 17, 1994
  • Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE
  • Ryosuke Shibasaki
  • PDF
  • Research Article
  • Citations21

Precision Evaluation and Fusion of Topographic Data Based on UAVs and TLS Surveys of a Loess Landslide

  • Dec 24, 2021
  • Frontiers in Earth Science
  • Zhonglei Mao +3
  • Preprint Article

Evaluation of UAV-borne photogrammetry and UAV-borne laser scanning for 3D topographic change analysis of an active rock glacier

  • Mar 27, 2022
  • Vivien Zahs +6
  • PDF
  • Research Article
  • Citations41

Voxel Grid-Based Fast Registration of Terrestrial Point Cloud

  • May 13, 2021
  • Remote Sensing
  • Biao Xiong +3
  • Research Article
  • Citations37

A novel and efficient method for wood–leaf separation from terrestrial laser scanning point clouds at the forest plot level

  • Sep 18, 2021
  • Methods in Ecology and Evolution
  • Peng Wan +6
  • Research Article
  • Citations17

Reconstructing DEM using TLS point cloud data and NURBS surface

  • Sep 01, 2015
  • Transactions of Nonferrous Metals Society of China
  • Bing Song +4
  • Conference Article
  • Citations3

Mapping with LIDAR and structure-from-motion photogrammetry: accuracy assessment of point cloud over multiple platforms

  • Sep 12, 2021
  • Larissa Marques Freguete +2
  • PDF
  • Research Article

Automatic Pairwise Coarse Registration of Terrestrial Point Clouds Using 3D Line Features

  • Jan 01, 2022
  • IEEE Access
  • Yongjian Fu +5
  • Research Article
  • Citations10

Rapid assessment of slope deformation in 3D point cloud considering feature-based simplification and deformed area extraction

  • Jan 31, 2023
  • Measurement Science and Technology
  • Leping He +5
  • PDF
  • Research Article
  • Citations150

Quality Evaluation of Digital Twins Generated Based on UAV Photogrammetry and TLS: Bridge Case Study

  • Sep 03, 2021
  • Remote Sensing
  • Masoud Mohammadi +5
  • PDF
  • Research Article
  • Citations3

Intricacies of Opening Geometry Detection in Terrestrial Laser Scanning: An Analysis Using Point Cloud Data from BLK360

  • Feb 21, 2024
  • Remote Sensing
  • Jinman Jung +4
  • Research Article

Data Augmentation for Deep Learning Training with Virtual Point Clouds Generated from CAD Models

  • Nov 05, 2025
  • International Journal of Automation Technology
  • Kosei Otani +2
  • PDF
  • Research Article
  • Citations26

A Deep Learning-Based Method for Extracting Standing Wood Feature Parameters from Terrestrial Laser Scanning Point Clouds of Artificially Planted Forest

  • Aug 08, 2022
  • Remote Sensing
  • Xingyu Shen +4
Cactus Communications logo

Copyright 2026 Cactus Communications. All rights reserved.