- Front Matter
11
- 10.1016/j.scico.2006.10.003
Software Configuration Management
- Nov 20, 2006
- Science of Computer Programming
- René Krikhaar + 1 more +1
Software Configuration Management
Major issues on process software engineering environments
Software Configuration Management
Software Configuration Management
The Software Process - What It Is, And HowTo Improve It
work of W. Edwards Deming has convinced industry that must first measure quality and then emphasise process to improve quality. In response to Deming's arguments and in light of perception that software industry is unable to produce quality products on schedule, and within budget, more software development organisations are now emphasising process measurement, monitoring, and assessment. This paper describes what is meant by software process and discusses an approach for its measurement and improvement. INTRODUCTION Unreliable software makes big news, from emergency services disasters to social security payment blunders. Improved software quality is essential to ensure reliable products and services, and gain customer satisfaction. While software development has existed for more than four decades, we failed so far to make as an industry and as an engineering discipline rather than craft. Developing reliable and usable software that is delivered on and within budget still represents difficult endeavour for many organisations. As role of software becomes increasingly critical for businesses as well as for human lives, problems caused by software products that are late, over budget, or that do not work, become magnified. If lives are lost or people inconvenienced due to incapable computer software, news media is there to make big stories. Organisations are realising that their fundamental problems is immaturity of their software process. Robert Lai (1993) proposes that process improvement is second maturity wave of software industry. He states that the first wave of software was developed using waterfall model in 1970's. Today we are Transactions on Information and Communications Technologies vol 8, © 1994 WIT Press, www.witpress.com, ISSN 1743-3517 216 Software Management in midst of second wave maturity movement as we attempt to formally define development process and best ways to continuously improve it (Lai 1993). Taking lead in this area has been Watts Humphrey (Humphrey 1989, 1990, 1991), and Software Engineering Institute (SEI) at Carnegie Mellon University. SEI started in 1986 to develop process maturity framework to help organisations appraise maturity of their software process, and to provide guidance for organisations to improve their software process capability. A brief description of framework was released in September 1987, including maturity questionnaire. SEI evolved model and questionnaire into 5 -Level Capability Maturity Model (CMM) in 1991. In February 1993, released CMM version 1.1 (Paulk et al 1993). This paper discusses software process and describes capability maturity model (CMM). It also shows how CMM can be used as basis to measure maturity of software process of an organisation and plan its improvement. SOFTWARE QUALITY AND PROCESS IMPROVEMENT In his book Quality is Free Phil Crosby states that: Quality is free. It is not gift, is free. What cost money are unqualify of things all actions that involve not doing jobs right first time (Crosby 1980). If such statement is true for many disciplines, is particularly true for evidence is abundant in number of software products which exceeded their budget, were produced late, failed to satisfy user requirements, and are full of bugs. demand for improved software quality is increasing to ensure reliable products and services. benefits of improved quality comes in form of reduction in failure costs. For software projects failure costs include (DTI 1992): • costs of correcting defects, both before and after delivery • overruns against and budget • unnecessary high maintenance costs • indirect costs which users incur due to poor quality software link between process maturity and software quality is expressed in premise that The quality of software system is governed by quality of process used to develop and maintain it. One stumbling block to improving software quality seems to be that not enough attention is paid to overall development process itself. While software professionals typically devote their to developing, testing or documenting software products, no one has prime responsibility for improving software process. Experience has shown that if Transactions on Information and Communications Technologies vol 8, © 1994 WIT Press, www.witpress.com, ISSN 1743-3517 Managing Systems 217 no one is working on software process, orderly improvement is unlikely. process certainly won't improve itself, rather, most likely, will deteriorate over time. Continuous improvement can occur only if process infrastructure is in place. Watts Humphrey argues in an early article published in Datamation, April 1989 that: Without work on process, there will be little or no progress in improving software. THE SOFTWARE PROCESS Adopting process view of software development represents revolutionary change in perspective. A process orientation to software development involves elements of structure, focus, measurement, ownership, skills, and supporting technology. In this section we investigate what is meant by software process. What Is Software Process According to Webster's dictionary, process is a system of operations in producing something .. series of actions, changes, or functions that achieve an end result. Chambers Concise Dictionary defines process as a series of actions or events .. sequence of operations or changes undergone. IEEE defines process as a sequence of steps performed for given purpose. In general business context, process is defined as a structured, measured set of activities designed to produce specified output for particular customer or market (Davenport 1993). These definitions put strong emphasis on HOW work is done, in contrast to product focus's emphasis on WHAT. Accordingly, process can be considered as a specific ordering of work activities across and place, with beginning, an end, and clearly identified inputs and outputs: structure for action. In this paper we will adopt following definitions quoted in (Humphrey 1990, Paulk et al 1993) are intended to encompass software throughout its life, which covers new development, enhancement, and repair. software process is The set of activities, methods, and practices used in production and evolution of software. software engineering process is The total set of software engineering activities needed to transform user's requirements into software. Transactions on Information and Communications Technologies vol 8, © 1994 WIT Press, www.witpress.com, ISSN 1743-3517 218 Software Management People and Software Process Software development is still people-intensive activity. Talented people are most important element in any software organisation. Even if you get best people available, if they do not follow common process, if everyone wrote in different programming languages, used different conventions, or didn't co-ordinate their design and code changes with their peers, results will be chaos. Successful software organisations have learned that even best professionals need structured and disciplined environment in which to do cooperative work. Software organisations that do not establish such disciplines condemn their people to endless hours of repetitively solving technically trivial problems. obvious fact is that attracting best people is vital, but is also essential to support them with an effectively managed software process. Technology and Software Process Another myth is widespread belief that some technologically advanced tool or method will provide magic answer to software crisis. This is not only wrong, but is dangerous. Organisations which jumped on bandwagon of CASE tools, and ended up in failure and wasted and effort have learned their lesson hard way. Just ask yourself before introducing technology: What do I want to automate? In absence of defined, practised, and managed process, introducing automation can lead to increased chaos. There are several factors which limit effective use of software technology: an illdefined process, inconsistent process implementation, and poor process management. Software technology cannot be fully effective until these problems have been properly addressed. Need for Defined Process If no effort is made to define and enhance software development process across whole organisation, each software development project latches on to its own tools, methods, and practices with little guidance available on how to use them. This ad hoc approach will not be sufficient to tackle task of developing complex software systems. goal of software process management is to enable organisations to produce software that meets cost, schedules, and quality objectives. principles are same that underpins statistical process control-principles that have been successfully used in controlling scientific experiments and in high -volume manufacturing operations. Statistical concepts have been found to be just as applicable to software development as they are to production of manufactured goods such as motor cars. Applying such concepts will only be possible if there is defined and managed process. Software Process Models Transactions on Information and Communications Technologies vol 8, © 1994 WIT Press, www.witpress.com, ISSN 1743-3517
Read moreTraceability Enhancement Technique through the Integration of Software Configuration Management and Individual Working Environment
Software productivity and quality improvement through software configuration management is based on organized and consistent change management. In change management, artifact identified as configuration item should be able to provide its changed history to the members in group and the members should be able to trace the changes made for the corresponding artifact. General software configuration management systems provide tracing information for artifacts only within the configuration management system, and it does not go further to changes that occur within individual working environment. This paper provides a solution that helps tracing changes that occur not only in configuration management, but also individual artifact’s changes through the integration of configuration management system and individual working environment. A revised version in configuration management system is connected to the artifact version of the working environment by the tagging technique, and traceability can be managed more effectively by sharing the tracing information.
Read moreProceedings of the 2015 International Conference on Software and System Process
Welcome to the International Conference on Software and Systems Process (ICSSP) held in Zurich, Switzerland, on June 2nd and 3rd, 2012. Having grown from a Software Process Workshop in 2005 to the International Conference on Software Process (ICSP) in 2007, and finally to the International Conference on Software and Systems Process (ICSSP) in 2011, this conference series has established its place in the software engineering community as a respected conference focusing on research and practice related to software and systems development process. Software and software systems development use processes as one major means for achieving and ensuring the quality of the final product. This leads to specific challenges regarding software processes such as simplicity, adaptability, standard conformance, the coordination of multiple domains and lifecycles, etc. Processes from other domains (e.g., health care, manufacturing, business, aerospace, automotive systems, and others) face similar challenges. Yet, they share interesting similarities with and differences to software processes. The question is: How can we in the software domain learn from other domains to meet our software process engineering challenges? The ICSSP conferences hence connect the traditional software and systems process community with outside views and insights, broadening its scope of software development processes to system development and explicitly including processes of other domains such as health care, business, and manufacturing. By sharing process development theories and practices from such domains, ICSSP 2012 is investigating novel solutions to today's process challenges. Correspondingly, the main theme of ICSSP 2012 is Beyond Software and Software Systems Processes, signaling our goal of learning from domains other than the traditional software process community.
Read moreIntroducing Requirements Change Management Process into ISO/IEC 12207
Requirements Engineering (RE) is one of the critical phases of any software development life cycle. Business and technology evolution increasingly poses many challenges and becomes a source of continuous change in RE. Changes to software are inevitable in the development process and are a source of project risk. During the last decade many Requirements Change Management (RCM) models have been proposed, but this area appears to remain rudimentary in software process standards. Configuration management process has been introduced in ISO/IEC 12207:2017; however, it does not fully address RCM problems. This paper proposes an RCM Process (RCMP) to address this issue. The process is extended to a theoretical model based on seven core essentials that were identified in the literature. Furthermore, the process is modeled in a Composition Tree (CT), a semi-formal graphic notation, and then we have compared the new process with existing Configuration Management (CM) process to highlight the differences. Our proposed process significantly addresses the deficiencies of existing change management process.
Read moreProcess-Centered Software Engineering Environments, A Brief History and Future Challenges
Software engineering environments have a history of about two decades. Early environments provided support for small fragments of the software process (usually focusing on programming-in-the small). Then there was a trend towards support for more complete software processes (from early phases like requirements analysis and design down to testing and configuration management). Ten years ago the notion of process-centered software engineering environments initiated a new field in software engineering: software process research. The key idea is to use a model of a software process as input parameter for a software engineering environment. The environment is supposed to “behave” in accordance to the process model. Some aspects of this vision became true, others turned out to be of little practicability. In this article, we discuss the history of software engineering environments with a particular focus on process-centered software engineering environments (PCSEEs). We discuss the notion of distributed software processes (as one of the most substantial current trends in software process research) and we motivate the notion of a software process middleware which serves as basis of real-world software processes spread over various sites. In addition, we discuss some other trends in the software process research arena.
Read moreAn approach for managing the evolution of web-based educational applications
The management of the infrastructure and content of the World Wide Web is a growing problem for the development of web-based educational applications (WbEA) and is hidden beneath the tremendous benefits of the web. Moreover, such systems undergo more frequent and quite extensive changes in their development and operational period because the client's perception (either the learner, the teacher or institutional organisation) of the complete end product is a moving target. So, there is a need for a disciplined approach to managing the evolution of web-based educational applications. Such a disciplined approach as applied throughout the software engineering process is called software configuration management (SCM). This paper begins a discussion of how the development of web-based educational applications could benefit from SCM techniques and tools and proposes a model for the management of the evolution of such systems. The model couples the development and evolution process of WbEA configurations into one framework, which seems promising for the implementation of a configuration management process. Also, the model focuses on the development of the web-based educational content, defining the configurations of the items involved in the underlying process. Finally, an example is given to demonstrate the benefits of the use of this approach.
Read moreSoftware Engineering, Process Improvement, and Experience Management
Software engineers have always been experimenting with various models in an endeavor to improve upon software processes. Recently, a new area of software process improvement through experience management has got attention of the software engineering community. Software developers are experimenting with experience management to improve software process. This chapter explores the role of experience management in mitigating the effects of software crisis and investigates the current state of EM in Indian software engineering environment. The chapter discusses the need and integration of knowledge and experience management practices in software engineering environments. The chapter begins with the discussion of the ills of software engineering, classically referred to as “software crisis,” like late delivery of the systems, ill-functionality, and cost overruns, and justifies how managing the knowledge and experience of software engineers and practitioners can ward off these evils. The chapter then discusses the models and methodologies for knowledge and experience management in software engineering. Finally, the chapter sheds light on the major works carried out in this area and suggests possible future research avenues in this domain.
Read moreSummary of the International Conference on Software and System Processes (ICSSP 2018)
The International Conference on Software and System Processes (ICSSP), continuing the success of Software Process Workshop (SPW), the Software Process Modeling and Simulation Workshop (ProSim) and the International Conference on Software Process (ICSP) conference series, has become the established premier event in the field of software and systems engineering processes. It provides a leading forum for the exchange of research outcomes and industrial best-practices in process development from software and systems disciplines. ICSSP 2018 was held in Gothenburg, Sweden, 26-27 May 2018, co-located with the 40th International Conference on Software Engineering (ICSE). The theme of ICSSP 2018 was studying \Demands on Processes, Processes on Demand" by recognizing the demands on processes that include the need for both welldeveloped plans and incremental deliveries (agile and hybrid processes), utilization of increased automation (model-based engineering and DevOps), higher degrees of customer collaboration, comprehensive analysis of existing products for reuse (open source and COTS), and performance requirements of enterprise-level architectures. Papers presented at ICSSP discussed these issues across different domains, providing concepts, evidence, and experiences.
Read moreThe Role of Empathy in Software Engineering - A Socio-Technical Grounded Theory
Empathy, defined as the ability to understand and share others’ perspectives and emotions, is essential in software engineering (SE), where developers often collaborate with diverse stakeholders. It is also considered as a vital competency in many professional fields such as medicine, healthcare, nursing, animal science, education, marketing, and project management. Despite its importance, empathy remains under-researched in SE. To further explore this, we conducted a socio-technical grounded theory (STGT) study through in-depth semi-structured interviews with 22 software developers and stakeholders. Our study explored the role of empathy in SE and how SE activities and processes can be improved by considering empathy. Through applying the systematic steps of STGT data analysis and theory development, we developed a theory that explains the role of empathy in SE. Our theory details the contexts in which empathy arises, the conditions that shape it, the causes and consequences of its presence and absence. We also identified contingencies for enhancing empathy or overcoming barriers to its expression. Our findings provide practical implications for SE practitioners and researchers, offering a deeper understanding of how to effectively integrate empathy into SE processes.
Read moreCONCEPTUAL MODEL OF THE CONFIGURATION MANAGEMENT PROCESS IN PROJECTS
A conceptual model of the configuration management process in projects was created. It was shown that in order to achieve the goal of this process, it is necessary to manage the configuration of the project, product and project environment. Also it was shown that, throughout the life cycle of a project, all three kinds of configuration should be coordinated with each other, i.e., the whole configuration in the project should be holistic. To do this, the general change management process should be implemented in the project. A connection between the tasks of configuration synthesis and configuration management in the project during its life cycle was shown. The article describes the composition of the general configuration management process in projects, and shows the role and position of each of its components. It was determined that the project configuration management process plays the leading role in relation to the project product configuration management process and project environment configuration management process.
Read moreCoObRA - a small step for development tools to collaborative environments
DOI: 10.1049/ic:20040206 ISBN: 0 86341 417 6 Location: Edinburgh, UK Conference date: 25 May 2004 Format: PDF Working on large software projects commonly requires software development in teams, which requires a tight interaction within the development team. Usually each developer is responsible for a certain part of the whole system. Therefore, it is necessary to let developers work independently without disturbing their teammates as well as allowing them to share their results with their teammates at a certain time and to integrate the developed software parts. Common practice is to use CASE-tools to support large software projects and a software configuration management (SCM) system that supports team coordination. Popular SCM systems are usually based upon text files and fail in versioning binary files or object-oriented structures on a fine-grained level, as usually produced by CASE-tools. On the other hand, current CASE-tools insufficiently support versioning and team coordination. CoObRA is a framework that offers undo/redo-, persistency-, multi-user-support and version control techniques for applications based on object-oriented data models in general. The major advantage is that it provides an easy-to-use mechanism requiring very low integration costs. CoObRA was successfully integrated in the Fujaba tool suite and is also part of Fujaba's code generation facilities that offer CoObRA's features to applications generated with Fujaba. However, CoObRA may easily be used outside Fujaba, too. Inspec keywords: computer aided software engineering; programming environments; groupware; configuration management; distributed object management; object-oriented programming; software tools Subjects: Software engineering techniques; Object-oriented programming; Programming support; Groupware; Distributed systems software
Read more<title>Jini-supported distributed version and configuration management system</title>
The permanently growing world-wide network infrastructure, allows more flexible distributed software development. Version and configuration management systems are the state of the art support for development teams. Distributed version and configuration management systems are usually employing the client/server scheme, where the client must be installed on the local machine under a specific operating system. This results in an update-problem of the only locally installed clients, when a new version of the client-software is required and has to be installed on all clients. The locally installed clients become even more problematic when extended functionality should be supported. To overcome this problem we have developed a scheme to provide a legacy version and configuration management system as Jini-services which are retrieved by an initial thin client.
Read moreApplication of 80/20 rule in software engineering Waterfall Model
Software process is the most important part of software project management, and software process models are important means of implementing the software process in any software organization. When there is need to improve the software process, then the need to improve the work-task part (software process models) of the software process must arise. As, there is need of increasing the commitment of software project managers through out the software development life cycle (SDLC), so we need to give them the list of activities in Waterfall Model, which should be made efficient by the software development team, to get the 80% productivity (output) easily, by reducing the effort of software development and ultimately increasing the performance of the software process. So, the idea of 80/20 rule (Pareto Principle, 1935) can be applied in the software engineering process model, in this regard. The Pareto Principle (1935) directed us to focus on what is really important in any field and field's work. Software process is most important part of software project management (SPM). This is also then ultimately needed for software project management (SPM) improvement. Our main research work is to improve the work-task part of the software process (i.e. software process models by applying the Pareto Principle - 80/20 Rule (1935) (or law of vital few) (1935), in the software engineering process models (or work-task part of the software process). This will be to facilitate the software project manager, using the software process models practically more efficient than without application of 80/20 Rule in software engineering Waterfall model. This has resulted in the reduction of the software development effort and increase in the performance of the software process. The results (efficient and improved software process models) will be implemented in the software industry, by software project managers, by focusing on the list of activities giving 80 percent of the overall productivity of the software process. The results will be the list of activities having the capability to give 20 percent of the overall productivity of the software Waterfall process, to be ignored, eliminated or designated to reduce the effort.
Read moreUsing configuration management and product line software paradigms to support the experimentation process in software engineering
There is no empirical evidence whatsoever to support most of the beliefs on which software construction is based. We do not yet know the adequacy, limits, qualities, costs and risks of the technologies used to develop software. Experimentation helps to check and convert beliefs and opinions into facts. This research is concerned with the replication area. Replication is a key component for gathering empirical evidence on software development that can be used in industry to build better software more efficiently. Replication has not been an easy thing to do in software engineering (SE) because the experimental paradigm applied to software development is still immature. Nowadays, a replication is executed mostly using a traditional replication package. But traditional replication packages do not appear, for some reason, to have been as effective as expected for transferring information among researchers in SE experimentation. The trouble spot appears to be the replication setup, caused by version management problems with materials, instruments, documents, etc. This has proved to be an obstacle to obtaining enough details about the experiment to be able to reproduce it as exactly as possible. We address the problem of information exchange among experimenters by developing a schema to characterize replications. We will adapt configuration management and product line ideas to support the experimentation process. This will enable researchers to make systematic decisions based on explicit knowledge rather than assumptions about replications. This research will output a replication support web environment. This environment will not only archive but also manage experimental materials flexibly enough to allow both similar and differentiated replications with massive experimental data storage. The platform should be accessible to several research groups working together on the same families of experiments.
Read more