Management of business ecosystem development in construction

The construction industry is one of the key sectors of the economy, which largely determines the level of development of infrastructure, the social sphere and the industrial potential of the state. In the context of globalization, rapid technological progress and growing environmental challenges, the relevance of innovative activity in the construction sector is constantly growing. The introduction of new technologies, materials, methods of design and management of construction processes is an integral part of the sustainable development of the industry, which allows to improve the quality, safety, efficiency and environmental friendliness of construction. The conceptual principles of innovative activity cover comprehensive approaches to the creation, implementation and use of new technologies and materials that contribute to the optimization of construction processes. An important task is to harmonize scientific and technological progress with economic and environmental aspects. The introduction of modern digital technologies, such as BIM (Building Information Modeling), automation of construction processes, the use of artificial intelligence and "smart" construction solutions, significantly changes traditional approaches to the design, construction and operation of facilities. The theoretical foundations of innovation in the construction industry are based on an interdisciplinary approach that combines engineering, economic, managerial and environmental aspects. Analysis of innovation processes allows us to identify key success factors, including financial support, research and development, legal regulation, international experience and professional training. Improving the regulatory framework and stimulating investment in scientific and technical development are important conditions for the formation of a favorable environment for innovation in construction. Thus, the study of the conceptual foundations and theoretical foundations of innovation in the modern construction industry is of strategic importance. The introduction of innovations not only increases the competitiveness of the construction industry, but also contributes to the development of sustainable construction, which meets global trends and requirements of modern society.

The construction industry of Malaysia is very dynamic in nature and the adoption of new technological advancements and construction methods has been a prime concerns for its key players and stakeholders. However, the adoption of BIM in such a dynamic industry is observed to be limited and its implementation has not been as successful as it should have been. The study focuses on the identification and prioritization the factors challenging the implementation of BIM in Malaysian construction industry. The data has been administrated through designed questionnaire by identifying the factors / barriers, by literature review, for implementation of BIM in construction industry. The prioritization of such factors is expected to help the major stake holders to address the issues according to their priority which will save lot of previous time and financial with smooth implementation of BIM in Architecture, Engineering and Construction (AEC) industry in future project.

Statement of the problem. The construction sector is essential to the macro economy and affects almost all aspects of a country's economy. However, construction is one of the most dynamic, risky, and challenging sectors. Building Information Modeling (BIM) is one of the methods that could speed up the working process on construction projects while saving resources. This study is aimed at examining the effects of tender documents, human resources, and BIM software on successful BIM implementation. Results. The initial research was performed as a pilot survey of 7 experts, including BIM specialists and construction company managers in order to validate the research variables and indicators. All of the study's variables passed the reliability test. The questionnaire was distributed to 62 experts in BIM and the construction industry. The tender document, human resources, and BIM software had a positive effect on the cost performance. R-square value for cost performance variable has an R-square value of 0.641%. This result reveals that tender documents, human resources, and BIM software influence cost performances by 64.1%, while the other factors account for the remaining 35.9%. Conclusions. The findings of this study reveal that tender documents, human resources, and BIM software influence the efficiency of BIM implementation, particularly in terms of project cost performance.

BIM compatibility and its differentiation with interoperability challenges as an innovation factor

Building Information Modeling (BIM) is a transformative technology driving digital innovation in the construction industry. Beyond a 3D design tool, BIM serves as a comprehensive data integration platform that facilitates seamless collaboration among stakeholders throughout the entire project lifecycle - from design and construction to operation. This article provides an overview of BIM, exploring its applications, benefits, challenges, and future development trends. Currently, BIM is extensively utilized in architecture, civil engineering, MEP (mechanical, electrical, and plumbing), and infrastructure management. Its advanced simulation and analytical capabilities help minimize design errors, optimize costs, accelerate project timelines, and enhance construction quality. However, challenges such as high initial investment, workforce training demands, and integration with legacy systems remain significant barriers to widespread adoption. Despite these obstacles, ongoing technological advancements and supportive policies are solidifying BIM’s role as an industry standard. Looking ahead, BIM is expected to integrate with Artificial Intelligence (AI), Virtual Reality (VR), Augmented Reality (AR), and the Internet of Things (IoT), fostering a digital ecosystem that enhances efficiency and sustainability in construction.

The present study uses a bibliometric and systematic literature review (SLR) to examine the use of Building Information Modeling (BIM), the Internet of Things (IoT), and Digital Twins (DT) in the construction industry. The network visualization and other approaches based on the Web of Science (WOS) database and the patterns of research interactions were explored in 1879 academic publications using co-occurrence and co-citation investigations. Significant publications, conferences, influential authors, countries, organizations, and funding agencies have been recognized. Our study demonstrates that BIM, IoT, and DT in construction, Heritage BIM (HBIM), Smart Contracts, BIM, and Ontology, and VR and AR in BIM and DT are the main study themes. Finally, several prospective areas for future study are identified, including BIM and Metaverse technology, BIM and Artificial Intelligence (AI), Metaheuristic algorithms for optimization purposes in BIM, and the Circular Economy with BIM and IoT.

Building information modeling (BIM) has become an integral part of commercial construction processes in recent years. This article summarizes a research study undertaken to explore the frequency of BIM application, the advantages and effects of using BIM, and various other methods associated with developing and using BIM models in commercial construction. Executive, mid-management, and BIM practitioner-level employees from eighteen leading commercial general contracting firms (with regard to BIM use) were surveyed to determine how their companies utilized BIM. Thirty-two different applications of BIM use were identified for commercial construction, and those most commonly utilized included clash detection, 3-D modeling, team collaboration, constructability issues of design, and sales. Communication, scheduling, coordination, visualization, and clash detection were identified as the top advantages of using BIM. Regarding the effects of using BIM, companies reported a positive impact on profitability, time of construction, and marketing. Finally, this article discusses various processes for using BIM, how models were used internally and with trade partners, and the decisions affecting BIM use by leading commercial contractors.

Building information modelling (BIM) enables the creation of a digital representation of a designed facility combined with additional information about the project attributes, performance criteria, and construction process. Users of BIM tools point to the ability to visualize the final design along with the construction process as a beneficial feature of using BIM. Knowing the construction process in relationship to a facility’s design benefits both safety professionals when planning worker safety measures for a project and designers when creating a project’s design. Success in using BIM to enhance safety partly depends on the familiarity of project personnel with BIM tools and the extent to which the tools can be used to identify and eliminate safety hazards. In a separate, ongoing study, the authors investigated the connection between BIM and safety to document the opportunities, barriers, and impacts. Utilizing an on-line survey of project engineers who work for construction firms together with a comprehensive literature review, the study found those who use BIM feel that it aids in communication of project information and project delivery, both of which have been found to have positive impacts on construction site safety. Further, utilizing the survey results, the authors apply the binary logistic regression econometric framework to better understand the factors that lead to safety professionals believing that BIM increases safety in the work place. In addition, according to the survey results, a large percentage of the engineers who use BIM feel that ultimately it helps to eliminate safety hazards and improve worker safety. The study findings suggest that improvements in safety performance across the construction industry may be due in part to increased use of BIM in the construction industry.

International recognition has been accorded to the potential of Building Information Modelling (BIM) to revolutionize the construction industry. There is a lot of potential for BIM to enhance project efficiency, lower costs, and achieve excellent project outcomes. However, because of several enablers and barriers, the Nigerian construction sector has been slow to adopt it and faces a number of challenges, which this study aims to identify. This study explores the state of building information modeling (BIM) adoption in Nigeria's construction sector, highlighting the main obstacles and drives influencing its adoption. It also looks at the factors that encourage and hinder BIM adoption in Nigeria. Conducting a comprehensive study of the current state of the construction industry, we investigate the key elements that either foster or impede the adoption of BIM. The study employs a mixed-methods (qualitative and quantitative) approach, combining a case study analysis with surveys (Questionnaire) to collect data from construction and built environment professionals in the field. The results highlight the urgent need to overcome technological, human, and regulatory barriers in order to facilitate the adoption of BIM, while also acknowledging the increasing impact of government initiatives and the need for improved project quality. The outcomes of these findings are discussed, recommendations are made for stakeholders in the conclusion, the limitations of the research are acknowledged, and valuable information regarding the level of preparation of the Nigerian construction industry for BIM is provided. It also offers suggestions for quickening the adoption of BIM. Keywords: Building Information Modelling (BIM), BIM adoption, Barriers, Drivers, Regulations, Construction professionals, Awareness.

Building Information Modelling (BIM) is a revolutionary stride of technology in the orthodox construction and procedures in conventional Architecture Engineering and Construction (AEC) industry which is stressed upon for its delay on embracing new technologies. The strength of BIM has been disvalued in the eyes of many professionals, to think of BIM as just another ‘software’ which is in reality, a ‘process’ of attaining an outstanding collaboration among each and every stakeholder throughout a project’s life cycle. Hence, the philosophy of Supply Chain Management (SCM) in a construction project can be achieved effectively with the BIM’s promise of flexible and transparent interaction among Construction Supply Chain (CSC) contributors. However, the complexities in CSC of a conservative setup has been more composite with the intervention of BIM. Consequently, the BIM project stakeholders have encountered complications on the effective application of BIM on CSC while reaching the envisioned goals of BIM. Thus, the intention of this study is to develop a foreseeable information flow model related to construction supply chain in a BIM aided project. In order to attain the aim, an extensive literature synthesis was piloted to develop a conceptual informational flow model among CSC stakeholders of a BIM project. This contemporary research outlines that the CSC of a BIM project is much interactive and flexible with its collaborative effort of stakeholders when compared to the clashes among professionals in traditional setups. In a practical context, the roles and duties of BIM project stakeholders identified in BIM standards, have slightly differed due to real-world complications in construction industry. Besides that, BIM standards have laid down charismatic arrangements on information flows among BIM project stakeholders, which is in reality, a complex and random setup. Hence, the research outcome has successfully answered the complications by laying down guidelines for any outsider to the BIM field to recognise what would be the contribution of each stakeholder throughout the BIM project’s life cycle.

The construction industry is one of the most hazardous industries, with a high number of working injuries and fatalities. A special issue for occupational accidents in the construction industry is the use of scaffolds, which is usually attributed to falls from height. Research and practice have demonstrated that decisions made upstream from the construction site can influence construction worker safety. Therefore, it is crucial to assess the risk levels for different construction stages on scaffolding, with various work trades, aiming to prevent the occurrence of fall accidents. The use of new techniques and methodologies, such as Building Information Modeling (BIM), is of major importance. The growing implementation of BIM in Architecture, Engineering and Construction (AEC) is changing the way safety can be approached. This study reviews the existing literature about BIM and construction safety on scaffolding, to explore useful findings and detect knowledge gaps for future research. Despite the enormous evolution of research and technological innovations based on BIM for construction safety, there is still a flagrant lack of knowledge and solutions for identifying hazards related to construction on scaffolding.

The continuous advancement of Building Information Modelling (BIM) influences the paradigm shift of collaboration, among multi-organisations for better digital data information generation, sharing, and management. In Malaysia, the utilization of BIM in construction projects is limited due to various challenges faced by multi-organizations including disputes in handling BIM collaboration which create a complex situation for the contractor to manage the construction phase. In fact, from the contractor's perspective, there is less specific procedure and reference to refer to as a guideline to implement BIM among multi-organisations. Thus, the conceptual framework is an initiative created as best practice to influence the success of collaboration among organizations in managing BIM construction projects based on contractor perspectives. This research study focused on three main objectives; (i) to determine the challenges faced among multi-organisations in enhancing collaboration in managing BIM construction projects, (2) to investigate the indicators that influence the multi-organisation in enhancing collaboration in managing BIM construction projects, and (3) to establish the conceptual framework in enhancing multi-organisation collaboration in managing BIM construction project based on contractor perspective. The methodology for this research study is a systematic literature review (SLR) and questionnaire survey were involved 30 BIM experts who have experience in managing BIM construction projects. The data from the questionnaire survey was processed and analyzed using the ranking analysis via mean and standard deviation to rank the factor for both objectives. Finally, based on the consolidated findings, a conceptual framework for multi-organization collaboration in managing BIM construction projects based on contractor perspectives was developed. The conceptual framework serves as an initial reference database and guideline platform for the contractor and other organizations to enhance BIM collaboration in construction projects in the context of the virtual environment.

This research was designed to assess the significance of using Building Information Modeling (BIM) standards to enhance efficiency in the Qatari construction industry. The need for more efficient processes arose in part from the Qatari government’s increased level of investment in infrastructure and the accompanying desire to secure the country’s 2030 vision. A questionnaire was used to collect primary data from the Qatari construction industry. Three questions guided this research: (i) What are the current challenges facing the Qatari construction industry in the smooth deliverance of projects?” (ii) “What strategies does the industry use in the promotion of an integrated business model that is technological centric?” (iii) “What are the possible challenges that the industry would face if it were to adopt BIM as a standard for all projects in the Qatari construction industry?” The outcome of the research shows that using BIM as a standard could not reduce the inefficiencies faced by the industry. While the respondents to the survey had realised that the industry had challenges, the implementation of BIM seemed not to be in line with the difficulties experienced in the industry. This finding was supported by a Pearson correlation coefficient of 0.001 for many survey questions. While the industry could be using BIM in general, it still does not form part of the strategy to promote collaborative working. The research did not emphasise the process of implementing BIM standards because most contracts did not require the use of BIM; neither do regulators. The research highlights the challenges of implementing BIM as a standard in a modern construction industry that is facing inefficiency. Even though clients have the capacity to apply innovative strategies, they are stifled by complex business structures and processes. Inefficient delivery of facilities raises questions about the management structures used by the industry. With a large expatriate workforce, Qatar needs systematic tools and approaches such as BIM for managing construction processes regardless of the level of experience and exposure of its managers. Adopting BIM could significantly improve working relations on projects. The research shows that the construction industry would require a standardised BIM process if companies were to deliver on their targets. There is value in adopting tools and techniques that would enhance collaborative tendencies by professionals working in the industry. However, the overall strategy to implement a standardised BIM approach would initially exacerbate current problems before it could bring forth improvements to the construction process.

In the construction industry, Building Information Modelling is primarily viewed as a catalyst for productivity and innovation. As projects have become more and more complex, there has been an increasing concern about the concept of project complexity. Understanding project complexity and managing contractors need to improve their management level as the rising building intricacy increases. In the construction industry, the contractors have faced many challenges, including workforce, increasing cost, inadequate risk management, unrealistic expectations/bad forecasting, limited skills, and delay problem. The project participants must coordinate and plan according to the project scope, including the construction process simulation, monitoring the construction quality, reducing rework, and improving economic benefits. Some of the main-contractor managements are trying to apply new modern technology. Building Information Modeling (BIM) is a tool used to the design, construction, and maintenance process of the whole cycle of the construction project. This article aims to analyze the BIM tool and take its advantage to improve the construction project management efficiency. The case study research approach is utilized to analyze the BIM tools. It includes the BIM 3D/4D/5D tools as the new method to build visualization model, execute clash detection, take-off quantity, simulate the construction process, make the work schedule graphically, and ensure the project is complete on time. This study is to research construction project management through applying the BIM tool. The BIM platform optimizes the design quality and improves construction work efficiencies, such as clash detection, work schedule, quantity take-off, etc. The results are also helpful for the identification of research clusters and topics in the BIM community

Introduction. The article focuses on the problems and prospects of building information modelling (BIM) technologies development in the construction industry of the country, valid development strategies, BIM technologies implementation and influence in the construction industry. It has been proved that creation of a digital twin of a construction facility at the design stage ensures its efficient management at the construction as well as operational stages. By studying BIM technologies legal regulation framework the possibilities of their use by the construction organisations have been outlined. The stages of the capital construction facilities life cycle have been defined, the categories of companies using BIM technologies in designing and construction practices have been specified. The aim of the study is to identify the problems hindering implementation of information modeling technologies in the construction industry of the Russian Federation and to propose solutions through automation of all processes at different stages of the capital construction facility life cycle.Materials and Methods. There are plenty of factors directly and indirectly affecting the time period of BIM implementation in the construction industry: the role of the state, the existing construction philosophy and many others. Considerable progress can be observed in the Scandinavian countries, in Netherlands, Germany, Singapore, France. The leading positions belong to the USA and Great Britain. But even in these countries it would be wrong to speak about complete implementation of BIM in the construction industry. In the Russian Federation the UK experience of BIM technologies implementation in the construction industry is used. For the UK authorities the main outcome of the information technologies implementation is maximum transparency of budget spending and control of construction costs. Therefore, all state construction projects are executed using the information modeling technologies. Russia has partly adopted the foreign countries experience in its construction industry – according to the Government Regulation No. 331 the design of all capital buildings and structures under the federal and regional orders must be carried out using an information model; and the package of materials to be included into an information model and general rules for its formation are regulated by the Russian Federation Government Regulation No. 1431, put into effect earlier.Results. In the Russian Federation the implementation of BIM technologies in the construction industry is regulated by the following regulatory documents: the Urban Planning Code of the Russian Federation, the Russian Federation Government Regulations, National Standards of the Russian Federation (GOST) and Codes of Practices (SP), Methodological Guidelines and Requirements for the State Expert Appraisal of Design Documentation and assessment of the information model. One should refer to the regulatory documents available on the official websites such as websites of the National Association of Organisations in the field of Information Modelling Technology (NOTIM), National Designers and Surveyors Association (NOPRIZ), as well as the Ministry of Construction, Housing and Utilities of the Russian Federation (Minstroy of Russia). On the whole BIM technologies in Russia are underdeveloped. BIM technologies are practically not used at the stages of construction and operation.Discussion and Conclusions. Building information modeling is more than just a new way of designing. This is a fundamentally different view on the facility life cycle management (building, installation of equipment, operation and maintenance and repairs). BIM technologies implementation in the construction sector is a long and controversial process. Sufficient time is required to optimise and set up the information technologies application in all areas of construction and operation. This work resulted in working through and finding solutions to the main problems of implementing the information modeling in construction: as follows from the foreign countries experience the acceleration of BIM technologies implementation in Russia should begin with strengthening the legislative framework via drawing up the national standards and technical regulations upon the initiative of the Ministry of Construction, Housing and Utilities of the Russian Federation.