Massive contingency analysis with high performance computing

The powerful computing capabilities of supercomputers enable them to execute a wide variety of high performance computing (HPC) applications. However, when executing HPC applications, the low hardware utilization prevents the efficiency of supercomputers from being fully exploited. Performance analysis is an effective way to discover performance bottlenecks. Existing research focuses on the profiling or modeling of HPC application performance, lacking systematic automatic performance analysis and tuning methods. To address the above challenge, in this paper, we propose a composable suite for HPC applications that can achieve low-overhead performance profiling, fine-grained performance modeling and automatic performance tuning. Specifically, a low-overhead profiling method is first proposed to accurately characterize the performance of HPC applications while minimizing the interference of measurement. Then, fine-grained performance models are built to predict the performance of HPC applications based on the profiling sampling. Finally, according to the performance models, an automatic tuning method is designed to improve the performance of coupled HPC applications. The experimental results show that the overhead of our profiling method is less than 15% for the benchmarks and the real-world applications. The average relative error of our modeling method is less than 10%. The optimal layouts contribute to the total running time savings of 16.33% and the total computing fee savings of 31.44%. The effectiveness of our methods is superior to the baselines.

In high performance computing (HPC) applications, the speed of the L1 cache will typically determine the maximum frequency (/Max) of the processor core. Companies that mass produce high-performance microprocessors commonly have the L1 cache consist of fully-custom macros: to ensure that the performance of the L1 cache does not limit the f <inf xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">MAX</inf> or throughput of the processor. In addition, it is also common for the custom L1 cache designs to use a two-port 8T or a large 6T bitcell, along with domino read logic and very short BL [2,3]. These designs tradeoff density and area for high performance. This paper presents a different approach, one which can satisfy a range of different applications; a memory compiler that can generate more than 10,000 different high-speed L1 cache macro configurations is proposed. The 7nm L1-cache compiler described in this paper uses a high-current (HC) 6T bitcell, which is more area efficient than an 8T bitcell. The HC bitcell, along with small-signal sensing, allows for long BL (256b), leading to further area efficiency improvements. Since these L1 macros are just as likely to be used in mobile applications as they are to be used in HPC applications, they were implemented using the array dual-rail (ADR) architecture [4]. The ADR architecture (Fig. 11.3.1) allows the periphery circuits of the L1 macro to operate at the same voltage as the processor core: a lower l/ <inf xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">DD</inf> results in dynamic power savings. ADR performance is also improved, over an interface dual-rail, when the SRAM and logic supplies are equivalent, as ADR design does not suffer from a level-shifter delays on the inputs or outputs.

Data center (DC) and high performance computing (HPC) applications have traditionally used a combination of copper, multimode fiber and single-mode fiber interconnects with relative percentages that depend on factors such as the line rate, reach and connectivity costs. The balance between these transmission media has increasingly shifted towards optical fiber due to the reach constraints of copper at data rates of 10 Gb/s and higher. The percentage of single-mode fiber deployed in the DC has also grown slightly since 2014, coinciding with the emergence of mega DCs with extended distance needs beyond 100 m. This trend will likely continue in the next few years as DCs expand their capacity from 100G to 400G, increase the physical size of their facilities and begin to utilize silicon-photonics transceiver technology. However there is a still a need for the low-cost and high-density connectivity, and this is sustaining the deployment of multimode fiber for links ≤ 100 m. In this paper, we discuss options for single-mode and multimode fibers in DCs and HPCs and introduce a reduced diameter multimode fiber concept which provides intra-and inter-rack connectivity as well as compatibility with silicon-photonic transceivers operating at 1310 nm. We also discuss the trade-offs between single-mode fiber attributes such as bend-insensitivity, attenuation and mode field diameter and their roles in capacity and connectivity in data centers.

Fault tolerance overhead of high performance computing (HPC) applications is becoming critical to the efficient utilization of HPC systems at large scale. Today's HPC applications typically tolerate fail-stop failures by check pointing. However, check pointing will lose its efficiency when system becoming very large. An alternative method is algorithm-based fault recovery which has been proved to be more efficient than check pointing. In this paper, we first point out by theoretical analysis that algorithm-based fault recovery will also lose its efficiency when systems scale up to Exa flops. Then, a more efficient algorithm-based fault tolerance scheme for HPC applications at large scale is presented. The new method has two novel skills. One is algorithm-based hot replacement, which avoids the stop-and-wait time after failure. Second is background accelerated recovery, which guarantees the system to endure multiple failures in succession. As a case study, this method is incorporated to High Performance Lin pack (HPL). Theoretical analysis shows that the fault tolerance overhead can be reduced to 2/log(p, 2) of that of algorithm-based fault recovery method (p is the number of computation processes), so that the new method will still be efficient in Exascale. Experimental results for up to 1800 processes show that the overhead of the new method is about 25% of that of algorithm-based fault recovery method, which is close to the theoretical prediction.

The availability of computing resources has significantly changed due to the growing adoption of the cloud computing paradigm. Aiming at potential advantages such as cost savings through the pay-per-use method and resource allocation in a scalable/elastic way, we witnessed consistent efforts to execute high-performance computing (HPC) applications in the cloud. Performance in this environment depends heavily upon two main system components: processing power and network interconnection. If, on the one hand, allocating more powerful hardware theoretically boosts performance, on the other hand, it increases the allocation cost. In this paper, we evaluated how the network interconnection impacts on performance and cost efficiency. Our experiments were carried out using NAS Parallel Benchmarks and Alya HPC application on Microsoft Azure public cloud provider, with three different cloud instances/network interconnections. The results revealed that through the use of the accelerated networking approach, which allows the instance to have a high-performance interconnect without additional charges, the performance of HPC applications can be significantly improved with a better cost efficiency.

Modern High Performance Computing (HPC) applications, such as Earth science simulations, produce large amounts of data due to the surging of computing power, while big data applications have become more compute-intensive due to increasingly sophisticated analysis algorithms. The needs of both HPC and big data technologies for advanced HPC and big data applications create a demand for integrated system support. In this study, we introduce Scientific Data Processing (SciDP) to support both HPC and big data applications via integrated scientific data processing. SciDP can directly process scientific data stored on a Parallel File System (PFS), which is typically deployed in an HPC environment, in a big data programming environment running atop Hadoop Distributed File System (HDFS). SciDP seamlessly integrates PFS, HDFS, and the widely-used R data analysis system to support highly efficient processing of scientific data. It utilizes the merits of both PFS and HDFS for fast data transfer, overlaps computing with data accessing, and integrates R into the data transfer process. Experimental results show that SciDP accelerates analysis and visualization of a production NASA Center for Climate Simulation (NCCS) climate and weather application by 6x to 8x when compared to existing solutions.

The demand for processing power has been ever increasing with the growth of high-performance computing (HPC) applications and so have the constraints restricting the solutions to such requirements. High-performance distributed and parallel computing and custom-built, hardware-based computing have attempted to address this problem with some success but at a substantial cost. Recently, systems augmented with Field-Programmable Gate Arrays (FPGAs) offering a fusion of traditional parallel and distributed machines with customizable and dynamically reconfigurable hardware have emerged as a cost-effective alternative to traditional systems. However, providing a robust runtime environment for such systems to which HPC users have become accustomed has been fraught with numerous challenges. Dynamic scheduling of large-scale HPC applications in such parallel reconfigurable computing (RC) environments is one such challenge and has not been sufficiently studied to our knowledge. In this paper, we simulatively analyze the performance of several common HPC scheduling heuristics that can be used by an automated job management service to schedule application tasks on a parallel RC system. We also present a performance prediction model which the scheduling heuristics employ to schedule several common HPC applications on a collection of typical FPGA processing platforms.

Some high performance computing (HPC) applications exhibit increasing real-time requirements, which call for effective means to predict their high execution times distribution. This is a new challenge for HPC applications but a well-known problem for real-time embedded applications where solutions already exist, although they target low-performance systems running single-threaded applications. In this paper, we show how some performance validation and measurement-based practices for real-time execution time prediction can be leveraged in the context of HPC applications on high-performance platforms, thus enabling reliable means to obtain real-time guarantees for those applications. In particular, the proposed methodology uses coordinately techniques that randomly explore potential timing behavior of the application together with Extreme Value Theory (EVT) to predict rare (and high) execution times to, eventually, derive probabilistic Worst-Case Execution Time (pWCET) curves. We demonstrate the effectiveness of this approach for an acoustic wave inversion application used for geophysical exploration.

SummaryWith the rise of exascale systems and large, data‐centric workflows, the need to observe and analyze high performance computing (HPC) applications during their execution is becoming increasingly important. HPC applications are typically not designed with online monitoring in mind, therefore, the observability challenge lies in being able to access and analyze interesting events with low overhead while seamlessly integrating such capabilities into existing and new applications. We explore how our service‐based observation, monitoring, and analytics (SOMA) approach to collecting and aggregating both application‐specific diagnostic data and performance data addresses these needs. We present our SOMA framework and demonstrate its viability with LULESH, a hydrodynamics proxy application. Then we focus on Astaroth, a multi‐GPU library for stencil computations, highlighting the integration of the TAU and APEX performance tools and SOMA for application and performance data monitoring.

Efficient checkpoint restoration is critical in high-performance computing (HPC) and AI applications, where slow recovery times disrupt workflows, waste resources, and hinder reproducibility. This work introduces a Merkle tree checkpoint restoration method to accelerate failure recovery and improve explainability. Our method integrates asynchronous I/O via the Liburing library to optimize scattered reads in HPC applications. Tested on the Polaris system at Argonne National Laboratory, it exhibits lower restoration time and memory consumption than state-of-the-art checkpoint restoration methods, reaching near-full efficiency with duplicated data. Our work advances scalable and efficient checkpointing solutions for HPC, ensuring reliable and fast failure recovery for large-scale simulations.

In recent year, based on high performance computing (HPC) and big data computing (BDC) application need to upgrade these performance incudes high process rates, high communication rate and low latencies. As transistor scaling reaches physical and economic barriers, the performance and cost of transistors are increasingly lagging behind the historical Moore's Law trajectory. Heterogeneous integration of SiP (system in package), 2.5D and fan-out solutions are driving the beyond Moore vision. In this paper, it is demonstrated that one of fan-out technology is to provide the high RDL layer count and fine RDL line width and line space, called FO-MCM (fan-out multi-chip modules). The FOMCM used organic interposer is applied lower RC delay and the high I/O density interconnection for HBM dies integration in comparison to 2.5D with the whole piece of Si interposer. Since HPC and BDC application performance derived High Bandwidth Memory grow up, that also impact the assembly package structure in parallel. The next general HBM need more metal layers to keep the performance in high frequency compare to original package design. SPIL's FO-MCM development integrates chips by 1 ASIC die and 2 HBM with 4–6 layers RDL show in Fig. 1. Since FOMCM used organic interposer to bridge chips, this kind of package can provide the solution which is cheaper than 2.5D and has simply vendor management to the end customer. As such, an overview of Fan-out integration solution associated with HBM will be presented in this paper.

There is a trend to migrate HPC (High Performance Computing) applications to cloud platforms, such as the Amazon EC2 Cluster Compute Instances (CCIs). While existing research has mainly focused on the performance impact of virtualized environments and interconnect technologies on parallel programs, we suggest that the configurability enabled by clouds is another important dimension to explore.Unlike on traditional HPC platforms, on a cloud-resident virtual cluster it is easy to change the I/O configurations, such as the choice of file systems, the number of I/O nodes, and the types of virtual disks, to fit the I/O requirements of different applications. In this paper, we discuss how cloud platforms can be employed to form customized and balanced I/O subsystems for individual I/O-intensive MPI applications. Through our preliminary evaluation, we demonstrate that different applications will benefit from individually tailored I/O system configurations. For a given I/O-intensive application, different I/O settings may lead to significant overall application performance or cost difference (up to 2.5-fold). Our exploration indicates that customized system configuration for HPC applications in the cloud is important and non-trivial.

Today's high-performance computing (HPC) applications are producing vast volumes of data, which are challenging to store and transfer efficiently during the execution, such that data compression is becoming a critical technique to mitigate the storage burden and data movement cost. Huffman coding is arguably the most efficient Entropy coding algorithm in information theory, such that it could be found as a fundamental step in many modern compression algorithms such as DEFLATE. On the other hand, today's HPC applications are more and more relying on the accelerators such as GPU on supercomputers, while Huffman encoding suffers from low throughput on GPUs, resulting in a significant bottleneck in the entire data processing. In this paper, we propose and implement an efficient Huffman encoding approach based on modern GPU architectures, which addresses two key challenges: (1) how to parallelize the entire Huffman encoding algorithm, including codebook construction, and (2) how to fully utilize the high memory-bandwidth feature of modern GPU architectures. The detailed contribution is fourfold. (1) We develop an efficient parallel codebook construction on GPUs that scales effectively with the number of input symbols. (2) We propose a novel reduction based encoding scheme that can efficiently merge the codewords on GPUs. (3) We optimize the overall GPU performance by leveraging the state-of-the-art CUDA APIs such as Cooperative Groups. (4) We evaluate our Huffman encoder thoroughly using six real-world application datasets on two advanced GPUs and compare with our implemented multithreaded Huffman encoder. Experiments show that our solution can improve the encoding throughput by up to 5.0× and 6.8× on NVIDIA RTX 5000 and V100, respectively, over the state-of-the-art GPU Huffman encoder, and by up to 3.3× over the multithread encoder on two 28-core Xeon Platinum 8280 CPUs.

This contribution deals with the Austrian research project AURORA and the application of high performance computing (HPC) in the field of microelectronics. In the first part the ‘Spezialforschungsbereich’ AURORA - Advanced Models, Applications, and Software Systems for High Performance Computing - is presented which is funded by the Austrian ‘Fonds zur Forderung der wissenschaftlichen Forschung’. Seven research groups belonging to different institutes of the ‘Universitat Wien’ and the ‘Technische Universitat Wien’ are participating in AURORA, thus covering the fields computer science, statistics and operations research, numerical mathematics, electrochemistry, and microelectronics. The second part deals with the activities concerning the application of HPC to the simulation of the behaviour of microelectronic devices and their technological process steps in order to intensify the research capabilities of the simulation tools.

Nondeterminism is an increasingly entrenched property of high-performance computing (HPC) applications and has recently been shown to seriously hamper debugging and reproducibility efforts. Tools for addressing the nondeterministic debugging problem have emerged, but they do not provide methods for systematically cataloging the nondeterminism in a given application. We propose a three-phase workflow for representing executions of nondeterministic message passing interface programs as event graphs, quantifying their structural similarity with graph kernels, and applying machine learning techniques to investigate shared properties across applications. We present an empirical study comparing two graph kernels’ suitability for this task and propose future uses of the methodology.