- Research Article
- 10.1002/ajoc.202000649
A New Era
- Dec 09, 2020
- Asian Journal of Organic Chemistry
- Andrei Dragan
A New Era
V. Prasad Shastri is the Professor of Biofunctional Macromolecular Chemistry, the BIOSS Professor of Cell Signalling Microenvironments, and one of the core faculties of the BIOSS Excellence Cluster at the Albert-Ludwigs University of Freiburg, Germany. He is internationally recognized for his contributions in biodegradable polymers, bone and cartilage regeneration, and nanoscale engineering of surfaces for biomedical applications. He obtained his Doctoral Degree in Chemistry from the Polymer Science and Engineering Program at the Rensselaer Polytechnic Institute, Troy, New York, USA. He carried out his post-doctoral work in biomedical engineering with Prof. Robert Langer at the Massachusetts Institute of Technology, Cambridge, USA.
A New Era
A New Era
Monolayer‐Protected Clusters: Versatile Materials of Electrochemical Importance
Monolayer‐Protected Clusters: Versatile Materials of Electrochemical Importance
Contributors
Contributors
Self-Assembled Peptide Hydrogels in Regenerative Medicine.
Regenerative medicine is a complex discipline that is becoming a hot research topic. Skin, bone, and nerve regeneration dominate current treatments in regenerative medicine. A new type of drug is urgently needed for their treatment due to their high vulnerability to damage and weak self-repairing ability. A self-assembled peptide hydrogel is a good scaffolding material in regenerative medicine because it is similar to the cytoplasmic matrix environment; it promotes cell adhesion, migration, proliferation, and division; and its degradation products are natural and harmless proteins. However, fewer studies have examined the specific mechanisms of self-assembled peptide hydrogels in promoting tissue regeneration. This review summarizes the applications and mechanisms of self-assembled short peptide and peptide hydrogels in skin, bone, and neural healing to improve their applications in tissue healing and regeneration.
Read moreEditing Mischarged Amino Acids: the Work of Paul R. Schimmel
RNA Determinants for Translational Editing: Mischarging a Minihelix Substrate by a tRNA Synthetase (Nordin, B. E., and Schimmel, P. (1999) <i>J. Biol. Chem.</i> 274, 6835–6838) Structure-specific tRNA Determinants for Editing a Mischarged Amino Acid (Beebe, K., Merriman, E., and Schimmel, P. (2003) <i>J. Biol. Chem.</i> 278, 45056–45061)
Read morePolymer Research at the State Key Laboratory of Supramolecular Structure and Materials, Jilin University.
2020 marked the 10th anniversary of the State Key Laboratory of Supramolecular Structure and Materials (SKLSSM), Jilin University. This special issue is dedicated to this occasion by highlighting the diverse polymer research activities at SKLSSM. SKLSSM was officially established in 2010 with a history dating back to 1978, when Prof. Au-chin Tang first brought into existence the Structure Chemistry Laboratory at Jilin University. The Structure Chemistry Laboratory then evolved over the years into SKLSSM under the leaderships of Profs. Jiacong Shen, Xi Zhang and Bai Yang. During the past decade, directed first by Prof. Bai Yang and now by Prof. Junqi Sun, SKLSSM has developed a dynamic range of research programs spanning the fields of polymer nanocomposites, self-healing and recyclable polymer materials, macromolecular assembly, optoelectronic materials and devices, green polymerization, computer simulation and experimental characterization of macromolecular systems. Central to these research fields is the emphasis of supramolecular interactions at molecular, macromolecular and materials levels. At SKLSSM, molecular force spectroscopy and computer modeling are the representative powerful tools employed for fundamental supramolecular studies. Supramolecular research has led to important findings in supramolecular polymers, carbonized polymer dots, optoelectronic materials, and healable/recyclable materials. SKLSSM now has 65 faculty members with diverse research backgrounds, including four academicians of the Chinese Academy of Science, seven awardees of the National Science Fund for Distinguished Young Scholars, as well as many others with various distinctions. The cutting-edge research at SKLSSM is well supported by state-of-the-art facilities and experienced staff members. The multidisciplinary research programs, collaborative environment, and modern research facilities provide a unique platform for innovation as well as for scientific training of young scholars. This special issue of Macromolecular Rapid Communications assembles a collection of 22 papers, comprising one Review, four Feature Articles, and 17 Communications, covering research topics ranging from supramolecular chemistry and materials, polymer (nano)composites, healable and reusable materials, biomaterials, polymer synthesis and functions, nanomechanical studies, to computer simulation. With these publications, we hope to showcase the research activities of SKLSSM and stimulate opportunities for future collaborations. This special issue has been organized with manuscripts prepared, reviewed, and revised during the challenging COVID-19 pandemic. We sincerely thank all the authors for contributing their work, the reviewers for their precious time, and the editors for putting together this special issue. Looking ahead, in the upcoming decade of the post COVID-19 era, SKLSSM, working together with other related sciences at Jilin University, will continue to conduct creative research to tackle challenges we are facing today for a more healthy, sustainable, and intelligent society of tomorrow. Zesheng An obtained his B.S. and M.S. degrees in chemistry from Shandong University in 1997 and 2000, and his Ph.D. in chemistry from Georgia Institute of Technology in 2005. After a postdoctoral position at the University of California, Santa Barbara, he joined Shanghai University in 2008 and became a professor of chemistry in 2010. In 2019, he moved to the State Key Laboratory of Supramolecular Structure and Materials, Jilin University, where his research is focused on controlled radical polymerization, enzymatic catalysis and self-assembly. Wenke Zhang obtained his B.S. and Ph.D. degrees in chemistry from Jilin University in 1997 and 2002. During 2001 and 2002 he worked as a joint-training Ph.D. student at Ludwig-Maximilians-Universität (LMU), Munich. After a postdoctoral position at the University of Nottingham (UK), he joined the State Key Laboratory of Supramolecular Structure and Materials, Jilin University and became a professor of chemistry in 2007. His research is focused on single molecule study of molecular interactions in polymer materials, bio-macromolecular structure and interactions, and polymer mechanochemistry. Junqi Sun obtained his B.S. and Ph.D. degrees in chemistry from Jilin University in 1996 and 2001. During 2000 and 2001, he worked as a joint-training Ph.D. student at Ludwig-Maximilians-Universität (LMU), Munich. He conducted postdoctoral research at RIKEN, Japan, from January 2002 to August 2003. In September 2003, he joined the faculty of Jilin University as a professor of chemistry. He has been serving as the director of the State Key Laboratory of Supramolecular Structure and Materials since 2015. His research is focused on novel interfacial assembly methods to the fabrication of composite films; self-healing polymer materials; recyclable supramolecular polymer composites.
Read moreGraphene-Based Materials in Regenerative Medicine.
Graphene possesses many unique properties such as two-dimensional planar structure, super conductivity, chemical and mechanical stability, large surface area, and good biocompatibility. In the past few years, graphene-based materials have risen as a shining star on the path of researchers seeking new materials for future regenerative medicine. Herein, the recent research advances made in graphene-based materials mostly utilizing the mechanical and electrical properties of graphene are described. The most exciting findings addressing the impact of graphene-based materials on regenerative medicine are highlighted, with particular emphasis on their applications including nerve, bone, cartilage, skeletal muscle, cardiac, skin, adipose tissue regeneration, and their effects on the induced pluripotent stem cells. Future perspectives and emerging challenges are also addressed in this Review article.
Read more6 - Perspectives of bioinspired materials in regenerative medicine
6 - Perspectives of bioinspired materials in regenerative medicine
Experiences of marginalized women pursuing doctoral degrees in chemistry: The critical role of recognition
Even though marginalized women are earning more doctoral degrees in chemistry than ever before, the proportion of women who complete chemistry doctorates does not reflect national population trends. Previous research has explored the experiences of marginalized women seeking chemistry doctorate degrees. These studies highlight the issues that marginalized women face but do not explain why they face them or the systemic issues that underpin these experiences. This study captures the firsthand experiences of marginalized domestic and international women (Black, Hispanic/Latina, Asian, Pacific Islander, and Indigenous) pursuing graduate degrees in chemistry. We conducted semi‐structured interviews with 29 participants to understand how their social identities might impact the development of their science identities. Intersectionality and the Science Identity Model informed both the interview guide and the interpretation of our data. Deductive and inductive coding, constant comparative analysis, and thematic analysis were used to examine the interplay between participants' identities and experiences. We found that recognition had a critical impact on women's science identities. Results show that participants received more positive recognition than negative from their academic community. The participants who received mostly positive recognition developed research, teaching, and altruistic science identities. Most of the positive recognition was associated with research accomplishments, which is not surprising since doctoral programs in chemistry focus primarily on research training. Conversely, the participants who received mostly negative forms of recognition developed disrupted science identities. These women described being tokenized, taken advantage of, and having their accomplishments dismissed because of their gender, race, and ethnicity. Additionally, sexist and racist comments surrounding appearance, speech, and demeanor contributed to a diminished sense of being taken seriously and, consequently, feeling less like a scientist.
Read moreBioresorbable Materials for Orthopedic Applications (Lactide and Glycolide Based)
A material capable of serving a purpose and then disappearing within the human body is no magic folklore but based on years of rigorous scientific evidence, proven clinical data, and wide commercial use. With over five decades of clinical use as materials for orthopedic applications, these types of materials, known as bioresorbable materials, continue to find use in novel applications such as sutures, screws, stents, scaffolds, and even synthetic skin. Their continued development can be attributed to advancements in novel synthesis techniques, processing technologies, implant design development, and innovative surgical techniques. This has resulted in growing interest for use of these materials in regenerative medicine and patient-specific treatments in the orthopaedic space. With increasing life expectancy, more active lifestyles, younger patient demographics, faster healing, advanced robotic surgical techniques, and reduced hospitalization costs, the need for ‘biologically smart materials’ is continually on the rise. Strategic selection and optimization of a bioresorbable material for a specific application meets this needs leading to the implant effectively serving its purpose in vivo and being able to smartly remove itself without incurring any extraneous effort from the native biological system. Among this class of materials, those that are based on lactide and glycolide have seen the most expansive development and subsequent clinical use.
Read moreA manufacturing approach to functional biomimetic three-dimensional-printed bone implants
Orthopedic surgeons frequently face the problem of selecting adequate implants that fulfill certain characteristics of mechanical stability and biological features. Recent three-dimensional printing advancements have made possible the use of biologically compatible materials in regenerative medicine in order to meet the increasing demand of tissue and organs, including bones. Current three-dimensional printing bone technologies can create either strong bone structures (based on primary scaffolds) that are structurally compatible but functionally inert or structures that have osteoconductive properties but are extremely weak. In this context, the present article presents a follow-up study based on previous analysis in which a new technique is used to create high-resistance implants using biocompatible materials as acrylonitrile butadiene styrene to print biomimetic scaffolds directly from computer assisted design data. The main objective is to develop a design methodology to model and create artificial bone tissue, based on the trabecular pattern of the host, to obtain scaffolds within a structural design that mimics the mechanical resistance of the patients’ bone. These scaffolds, obtained from a micro-tomography, would generate stronger structures by enhancing them with osteoblast precursor cells in an osteogenic habitat in order to generate bone tissue in their surface. Mechanical strength of these scaffolds is also analyzed by comparing models with and without trabecular patterns using a standard compression test. The anisotropy of the structures was also considered in this analysis. Results confirm that trabecular pattern and bone matrix formation enhances the mechanical strength of the scaffolds obtaining similar values as of real trabecular tissue. The clinical use of the developed structures would constitute a new generation of three-dimensional-printed functional implants.
Read moreDecellularized natural 3D cellulose scaffold derived from Borassus flabellifer (Linn.) as extracellular matrix for tissue engineering applications
Decellularized natural 3D cellulose scaffold derived from Borassus flabellifer (Linn.) as extracellular matrix for tissue engineering applications
Read moreHydrogels: Glycosaminoglycan‐Based Biohybrid Hydrogels: A Sweet and Smart Choice for Multifunctional Biomaterials (Adv. Mater. 40/2016)
Incorporation of glycosaminoclycans (GAGs) into biomaterials opens up new routes for the presentation of various bioactive molecules. The review on page 8861 by U. Freudenberg, K. Kiick, C. Werner and co-workers covers recent approaches to GAG-based materials, highlighting modular, tunable biohybrid hydrogels obtained by covalent and non-covalent conjugation schemes, as well as theory-driven design concepts and advanced processing technologies. Examples of the application of the resulting materials in regenerative medicine are provided.
Read morePlasma-induced Polymerization and Grafting of Acrylic Acid on the Polypropylene Nonwoven Fabric Using Pulsed Underwater Diaphragm Electrical Discharge
Polypropylene (PP) nonwovens are used in many hygiene, healthcare and medical products due to their low cost, high chemical resistance and inertness. From an economic point of view, PP textiles would be used as an excellent support material in regenerative medicine or tissue engineering, but here surface functionalization is necessary to ensure cell adhesion and proliferation. Acrylic acid (AAc) is an excellent source of carboxylic-rich (-COOH) coatings suitable for this purpose, but their multistep preparation is time-consuming. Plasma polymerization provides an excellent solution to this demanding procedure since the process of polymerization and grafting to the substrate takes place simultaneously. Here, we propose a relatively fast and effective method for AAc plasma polymerization by using a pulsed underwater diaphragm electrical discharge operated in an aqueous solution consisting of AAc. AAc layers are successfully grafted onto PP nonwovens, which are continuously rewound through the slit where the plasma is generated. The presence of plasma polymerized AAc layer in the fibrous structure of PP nonwoven was monitored by SEM, FTIR and XPS measurements. Additionally, the improved wettability and adhesion characteristics were investigated by the critical wetting surface tension (CWST) method, the standard method of strike-through time (STT) and „tape-peel“ test. Resulting AAc modified PP nonwoven possesses hydrophilic character, enhanced adhesion and a considerable amount of -COOH groups on the surface. Although after the washing test the FTIR and XPS results indicated a lower concentration of the carboxylic groups, the CWST and STT measurements confirmed the stable hydrophilic character of the PP nonwovens surface.
Read moreTranscriptomic profiling of neural stem cell differentiation on graphene substrates
Transcriptomic profiling of neural stem cell differentiation on graphene substrates