Maximizing intelligent reflecting surface (IRS) positioning in 5G wireless communication and beyond using genetic algorithms for enhanced spectral efficiency

Intelligent reflecting surface (IRS) is a very promising technology for the development of beyond 5G or 6G wireless communications due to its low complexity, intelligence, and green energy-efficient properties. In this paper, we combined IRS with physical layer security (PLS) to solve the security issue of cognitive radio (CR) networks. Specifically, an IRS-assisted multi-input single-output (MISO) CR wiretap channel was studied. To maximize the secrecy rate of secondary users subject to a total power constraint (TPC) for the transmitter and interference power constraint (IPC) for a single antenna primary receiver (PR) in this channel, an alternating optimization (AO) algorithm is proposed to jointly optimize the transmit covariance R at transmitter and phase shift coefficient Q at IRS by fixing the other as constant. When Q is fixed, R is globally optimized by equivalently transforming the quasi-convex sub-problem to convex one. When R is fixed, bisection search in combination with minorization–maximization (MM) algorithm was applied to optimize Q from the non-convex fractional programming sub-problem. During each iteration of MM, another bisection search algorithm is proposed, which is able to find the global optimal closed-form solution of Q given the initial point from the previous iteration of MM. The convergence of the proposed algorithm is analyzed, and an extension of applying this algorithm to multi-antenna PR case is discussed. Simulations have shown that our proposed IRS-assisted design greatly enhances the secondary user’s secrecy rate compared to existing methods without IRS. Even when IPC is active, the secrecy rate returned by our algorithm increases with transmit power as if there is no IPC at all.

In this paper, integration of intelligent reflecting surface (IRS) with unmanned aerial vehicle (UAV)-assisted network-coded cooperation (UA-NCC) system is proposed for improving the reliability of the infrastructure-less network in sixth generation (6 G) wireless communication. A mathematical framework is proposed by considering Nakagami-<inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"><tex-math notation="LaTeX">$m$</tex-math></inline-formula> fixed channel gain for ground-to-ground (G2G) links and height-dependent Nakagami-<inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"><tex-math notation="LaTeX">$m$</tex-math></inline-formula> channel gain for air-to-ground (A2G) links. Moreover, a cumulative distribution function (CDF) for end-to-end (E2E) signal-to-noise ratio (SNR) is derived for the proposed scheme, by considering the signal is reached the end users either through an IRS or via a UAV. Furthermore, an outage probability and its asymptotic behavior for the proposed system model are derived by considering the effect of both the signal coming via UAV as well as IRS elements in Nakagami-<inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"><tex-math notation="LaTeX">$m$</tex-math></inline-formula> fading environments. The findings demonstrate that the simulation results are aligned with our theoretical derivation, and it is also compared with the existing state-of-the-art.

A Survey of Intelligent Reflecting Surfaces: Performance Analysis, Extensions, Potential Challenges, and Open Research Issues

Wireless communication environment becomes more and more complex especially when facing vicious eavesdroppers and external jammers. Intelligent reflecting surface (IRS) can provide secure or anti-jamming communication approaches via passively reflecting with low power consumption and high cost efficiency. Unmanned aerial vehicle (UAV) also can be used to cooperatively transmit useful signals of legitimate users with vicious attackers. Carrying IRS on UAV can add new cooperative strategies, such as trajectory or height of UAV, numbers of reflecting elements or phase shift of IRS, to improve secure and anti-jamming performance of legitimate users. Two cooperative transmission schemes assisted with UAV and IRS are proposed to confront passive eavesdroppers or smart jammers in this paper. The first kind of cooperation is to select UAV relay or IRS reflecting strategy to improve energy efficiency of system with passive eavesdroppers. The second kind of cooperation is to jointly optimize phase shifts of IRS and trajectory of UAV to enhance transmission capacity with smart jammers. Simulation results show that, with the help of the cooperation of UAV and IRS, secure and reliable communications can be realized and system performance can be improved compared with no cooperation scheme or only one kind of cooperation with UAV or IRS scheme.

Intelligent Reflecting Surfaces (IRS) is a groundbreaking innovative technique to boost energy and spectral efficiency in upcoming wireless systems, enabling simultaneous wireless information and power transfer (SWIPT). This paper optimizes Energy Harvesting Efficiency (EHE) in a multi-input multi-output (MIMO) SWIPT system, where an access point (AP)/base station (BS) uses an IRS to serve multi energy receivers (ERs) and information receivers (IRs). We formulate an EHE optimization problem, designing active and passive beamforming while satisfying the AP/BS power constraints, IRS unit-modulus constraints and IR rate demands in a linear EH model. The Linear Matrix Inequalities (LMIs) are approximated for efficient solutions. And second-order cone programming (SOCP) is solved via convex optimization (CVX), while the penalty convex-concave procedure (CCP) guarantees convexity to non-convex problems. Next, an alternating optimization (AO)-reliant iterative algorithm derived sub-optimal solutions with slack variables. According to simulation results, for all ERs within a linear EH design/model, the proposed algorithm improves total EHE by 40% to 45% compared to randomize, No-IRS, and decode-and-forward (DF) relay strategies. Ultimately, highlighting IRS’s benefit in improving quality of service (QoS) by tweaking its elements and AP/BS antennas.

Prior studies on intelligent reflecting surface (IRS) have mostly considered wireless communication systems aided by a single passive IRS, which, however, has limited control over wireless propagation environment and suffers product-distance path-loss. To address these issues, we propose in this paper a new hybrid active/passive IRS aided wireless communication system, where an active IRS and multiple passive IRSs are deployed to assist the communication between a base station (BS) and a remote user in complex environment, by establishing a multi-hop reflection path across active/passive IRSs. In particular, the active IRS enables signal reflection with power amplification, thus effectively compensating the severe path-loss in the multi-reflection path. To maximize the achievable rate at the user, we first design the optimal beamforming of the BS and selected (active/passive) IRSs for a given multi-reflection path, and then propose an efficient algorithm to obtain the optimal multi-reflection path by using the path decomposition method and graph theory. We show that the active IRS should be selected to establish the beam routing path when its amplification power and/or number of active reflecting elements are sufficiently large. Last, numerical results demonstrate the effectiveness of the proposed hybrid active/passive IRS beam routing design as compared to the benchmark scheme with passive IRSs only.

This paper presents a comparative analysis of intelligent reflecting surface (IRS) technology versus conventional amplify-and-forward (AF) and decode-and-forward (DF) relay schemes in wireless communication. By focusing on transmit power, energy efficiency, and the minimum IRS elements required to outperform traditional relaying, we explore IRS’s potential as an energy efficient alternative. Our analysis shows that IRS configurations, especially with optimal phase shifts, achieve substantial power savings and superior energy efficiency over to AF and DF relays. Moreover, IRS requires fewer elements to meet or exceed relaying performance under higher data rate demands, making it an ideal choice for energy conscious, high performance network designs. These results highlight IRS technology as a promising solution for sustainable, next-generation communication networks.

We consider an intelligent reflecting surface (IRS)-assisted communication system as a cost-effective technique to enhance secrecy rate performance in physical-layer security (PLS) systems. In this letter, the randomized radiation (RR)-based PLS algorithm, which uses active antenna arrays to randomize the radiation pattern, is adopted in IRS through passive beamforming. We show that RR cannot be simply applied to IRS because the secrecy rate is subject to the phase-dependent amplitude variations in IRS. Therefore, we provide an exact and closed-form expression for the secrecy rate of RR using IRS. Based on the analysis, we introduce a constant phase shift into the IRS elements and identify it as a key parameter to optimize the secrecy performance through a genetic algorithm.

This study investigates the integration of an intelligent reflecting surface (IRS) into an unmanned aerial vehicle (UAV) platform to utilize the advantages of these leading technologies for sixth-generation communications, e.g., improved spectral and energy efficiency, extended network coverage, and flexible deployment. In particular, we investigate a downlink IRS–UAV system, wherein single-antenna ground users (UEs) are served by a multi-antenna base station (BS). To assist the communication between UEs and the BS, an IRS mounted on a UAV is deployed, in which the direct links are obstructed owing to the complex urban channel characteristics. The beamforming at the BS, phase shift at the IRS, and the 3D placement of the UAV are jointly optimized to maximize the sum rate. Because the optimization variables, particularly the beamforming and IRS phase shift, are highly coupled with each other, the optimization problem is naturally non-convex. To effectively solve the formulated problem, we propose an iterative algorithm that employs block coordinate descent and inner approximation methods. Numerical results demonstrate the effectiveness of our proposed approach for a UAV-mounted IRS system on the sum rate performance over the state-of-the-art technology using the terrestrial counterpart.

We consider a wireless communication system, where a transmitting source is assisted by both a reconfigurable intelligent reflecting surface (IRS) and a decode-and-forward half-duplex relay (hybrid IRS-relay scheme) to communicate with a destination receiver. All devices are equipped with multiple antennas, and transmissions occur in two stages. In stage 1, the source splits the transmit message into two sub-messages, transmitted to the destination and the relay, respectively, using block diagonalization to avoid interference. Both transmissions will benefit from the IRS. In stage 2, the relay re-encodes the received sub-message and forwards it (still through the IRS) to the destination. We optimize power allocations, beamformers, and configurations of the IRS in both stages, in order to maximize the achievable rate at the destination. We compare the proposed hybrid approach with other schemes (with/without relay and IRS), and confirm that high data rate is achieved for the hybrid scheme in case of optimal IRS configurations.

An intelligent reflecting surface (IRS) assisted wireless communication system, with statistically correlated channels between the transmitter and the IRS pair and between the IRS and the receiver pair, is studied in the absence of channel state information (CSI). Assuming the phases added by IRS elements to be deterministic, the closed-form analytical expression for the symbol error probability (SEP) and the upper bound on the channel capacity are derived, with the transmitter employing binary phase-shift keying (BPSK) modulation for data transmission. The asymptotic SEP expression is derived and the achievable diversity order of the system is shown to be independent of the number of IRS elements. A search based algorithm is proposed to obtain the optimal phase at IRS minimizing the average SEP, as a equal phase configuration. The optimal equal phase is also found to maximize the average channel capacity. Numerical results are presented for the case of channels following a practical IRS correlation model.

This article introduces a novel strategy for wireless communication security utilizing intelligent reflecting surfaces (IRS). The IRS is strategically deployed to mitigate jamming attacks and eavesdropper threats while improving signal reception for legitimate users (LUs) by redirecting jamming signals toward desired communication signals leveraging physical layer security (PLS). By integrating the IRS into the backscatter communication system, we enhance the overall secrecy rate of LU, by dynamically adjusting IRS reflection coefficients and active beamforming at the base station (BS). A design problem is formulated to jointly optimize IRS reflecting beamforming and BS active beamforming, considering time-varying channel conditions and desired secrecy rate requirements. We propose a novel approach based on deep reinforcement learning (DRL) named Deep-PLS. This approach aims to determine an optimal beamforming policy capable of thwarting eavesdroppers in evolving environmental conditions. Extensive simulation studies validate the efficacy of our proposed strategy, demonstrating superior performance compared to traditional IRS approaches, IRS backscattering-based anti-eavesdropping methods, and other benchmark strategies in terms of secrecy performance.

Intelligent reflecting surface (IRS) has emerged as a promising technique to enhance wireless communication performance cost-effectively. The existing literature has mainly considered IRS being deployed near user terminals to improve their performance. However, this approach may incur a high cost if IRSs need to be densely deployed in the network to cater to random user locations. To avoid such high deployment cost, in this paper we consider a new IRS aided wireless network architecture, where IRSs are deployed in the vicinity of each base station (BS) to assist in its communications with distributed users regardless of their locations. Besides significantly enhancing IRSs’ signal coverage, this scheme helps reduce the IRS-associated channel estimation overhead as compared to conventional user-side IRSs, by exploiting the nearly static BS-IRS channels over short distance. For this scheme, we propose a new two-stage transmission protocol to achieve IRS channel estimation and reflection optimization for uplink data transmission efficiently. In addition, we propose effective methods for solving the user-IRS association problem based on long-term/statistical channel knowledge and the selected user-IRS-BS cascaded channel estimation problem. Finally, all IRSs’ passive reflections are jointly optimized with the BS’s multi-antenna receive combining to maximize the minimum achievable rate among all users for data transmission. Numerical results show that the proposed co-site-IRS empowered BS scheme can achieve significant performance gains over the conventional BS without co-site IRS and existing schemes for IRS channel estimation and reflection optimization, thus enabling an appealing low-cost and high-performance BS design for future wireless networks.

Intelligent Reflecting Surfaces (IRS), a planar array consisting of a large number of low-cost and low-complexity metal patch elements, is predicted to be among the key technologies in future wireless communications. This is mainly due to its capability to improve wireless energy and spectrum efficiency by reconfiguring the wireless environment in a smart and flexible way. IRS is capable of shifting the phase, amplitude, frequency, or even polarity of the impinging electromagnetic (EM) wave. However, only the phase-shift type of IRS is widely adopted in most scenarios. In this paper, we exploit the property of such IRS to directly modulate an incident EM wave with phase shift keying (PSK) modulation. We consider one transmit antenna that transmits a continuous single-tone electromagnetic (EM) wave, which is then modulated by the IRS and reflected toward the receiver. In addition to the theoretical explanation, we present simulation results with different modulation orders. Moreover, we validated the simulation results by experiment. Furthermore, we also proposed a beam scanning method to obtain IRS patterns to steer the beam towards the desired direction in an adaptive manner. One optimal pattern that maximizes the received power is then selected from the beam scanning codebook. By doing so, a wireless path strength can be significantly improved.

Intelligent reflecting surfaces (IRSs) are a promising technology for future-generation wireless networks by extending coverage region to blind spots and increasing mmWave propagation paths in non-line of sight environments. User association (UA) in dense millimeter wave (mmWave) networks is vital to characterizing connections among base stations (BSs) and mobile users for load balancing, interference management, and maximizing network utility. However, it has yet to be examined thoroughly in a multi-IRS-aided network. This paper presents a new UA scheme that takes cell interference into account for a multi-cell mmWave cellular network aided with multiple IRSs. We formulate a network spectral efficiency maximization problem by jointly optimizing active beamforming (AB) at the BSs, passive beamforming (PB) at the IRSs, and user-BS association with consideration of the impact of IRSs. We then propose a computationally efficient iterative algorithm based on alternating optimization (AO) to resolve this intractable mixed-integer non-convex problem. A fractional programming technique is used to optimize active beamforming at the BSs and passive beamforming at the IRSs, and a penalization method combined with successive convex programming is applied for UA optimization, which is shown to reach the optimal solution. Simulation results show significant performance improvements obtained by the proposed algorithm, providing higher spectral efficiency compared to several benchmark algorithms, while having a low computational complexity.