Maximizing Quality of Aggregation in WSNs under Deadline and Interference Constraints

Minimum-Latency Aggregation Scheduling (MLAS) is a problem of fundamental importance in wireless sensor networks. There however has been very little effort spent on designing algorithms to achieve sufficiently fast data aggregation under the physical interference model which is a more realistic model than traditional protocol interference model. In particular, a distributed solution to the problem under the physical interference model is challenging because of the need for global-scale information to compute the cumulative interference at any individual node. In this paper, we propose a distributed algorithm that solves the MLAS problem under the physical interference model in networks of arbitrary topology in O(K) time slots, where K is the logarithm of the ratio between the lengths of the longest and shortest links in the network. We also give a centralized algorithm to serve as a benchmark for comparison purposes, which aggregates data from all sources in O(log3n) time slots (where n is the total number of nodes). This is the current best algorithm for the problem in the literature. The distributed algorithm partitions the network into cells according to the value K, thus obviating the need for global information. The centralized algorithm strategically combines our aggregation tree construction algorithm with the non-linear power assignment strategy in [9]. We prove the correctness and efficiency of our algorithms, and conduct empirical studies under realistic settings to validate our analytical results.

This paper deals with information discovery and aggregation in large scale wireless sensor networks applied for mission-critical applications like military reconnaissance. To support query processing based on the gathered information, an efficient and reliable information discovery mechanism is proposed for sensor networks. We extend the basic Comb-Needle Discovery Support Model [3] by including Cluster-based data aggregation mechanism, which helps minimize the communication cost. Clusterbased approach groups the sensor nodes in the sensor network. Each node of a group will send information to its Cluster Head, which then aggregates and forwards the information to the base station (Sink). We compare the performance of proposed Cluster-based Comb-Needle Model with the basic Comb-Needle Model using the parameters, namely, energy consumption and communication cost. The experimental results through Avrora Simulator on TinyOS Platform reveal that Clusterbased Comb-Needle Model for Data Aggregation helps a sensor network in conserving its energy, and thereby extending its life time.

This paper attempts to identify the reliability assessment in terms of data aggregation in wireless sensor networks. With the sensor nodes' Bayesian lifetime model, the fault ratio of sensing data among a pair of nodes in the worst case is derived. Leveraging the property of exponential aggregation latency distribution, the optimizing strategy, namely fault-tolerant scheduling for aggregation (FTSA) is proposed. Quantitative analysis of the task scheduling is also presented, which is used for reducing the latency of data aggregation. Moreover, the sensor fault probability and aggregation latency are initially introduced into the data collection scheduling process, and it mathematically shows that the fused local estimate can obtain a global estimation with the reliable data acquisition framework. Performance evaluations of the proposed approach with both sensor node faults and scheduling policy are carried out. These results show that the proposed approach outperforms the earlier algorithms in terms of latency designed without regard to sensor faults.

Data aggregation is an essential operation in many applications of Wireless Sensor Networks (WSNs). For energy constrained and delay sensitive WSNs, how to prolong the lifetime and reduce the latency of the network are two critical problems. We deal with these two problems together in data aggregation by proposing a Load Balanced and Delay Efficient Algorithm (LBDEA), which consists of two phases. First, construct a load-balanced data aggregation tree based on Semi-Matching algorithm in the graph theory. Second, seek a collision-free scheduling based on greedy strategy for the transmission links in the aggregation tree. Through balancing the load of the sensor nodes, the lifetime of the network is optimized. By avoiding collisions and retransmissions of data delivery, the total latency is decreased. Simulations show that LBDEA not only improves the lifetime but also cuts down the delay for data aggregation in WSNs, compared with other related algorithms.

Data aggregation in wireless sensor networks using ant colony algorithm

Data aggregation plays an important role in energy constrained wireless sensor networks (WSN). Redundant data can be aggregated at intermediate nodes of a WSN reducing the number of messages exchanged and consequently reducing communication costs. In this work we consider the problem of constructing a dynamic and scalable structure for data aggregation in WSN. Although there are many proposed solutions to data aggregation in WSN, most of them build the data aggregation structure based on the order in which events occur. This kind of structure leads to low quality routing trees and does not address the load balancing problem, since the same tree is used throughout the network life. To tackle these challenges we propose a novel routing protocol called Dynamic and Scalable Tree (DST), which reduces the number of messages necessary to set up a routing tree, maximizes the number of overlapping routes, and selects routes with the highest aggregation rate. The routing tree created by DST does not depend on the order of events and is not held fixed along the occurrence of events. DST was extensively compared with two solutions reported in the literature regarding communication costs, aggregation rate and quality of the routing tree. Results show that the routing tree built by DST provides the best aggregation quality compared with other algorithms outperforming them for different scenarios in all evaluations performed.

In‐network data aggregationin wireless sensor networks (WSNs) is a technique aimed at reducing the communication overhead—sensed data are combined into partial results at intermediate nodes during message routing. However, in the above technique, some sensor nodes need to send their individual sensed values to an aggregator node, empowered with the capability to decrypt the received data to perform a partial aggregation. This scenario raises privacy concerns in applications like personal health care and the military surveillance. A few other solutions exist where the data are not disclosed to the aggregator (e.g., using privacy homomorphism (PH)), but these solutions are not robust to node or communication failure.The contributions of this paper are two‐fold: first, we design a private data aggregation protocol that does not leak individual sensed values during the data aggregation process. In particular, neither the base station (BS) nor the other nodes are able to compromise the privacy of an individual node's sensed value. Second, the proposed protocol is robust to data‐loss; if there is a node‐failure or communication failure, the protocol is still able to compute the aggregate and to report to the base station the number of nodes that participated in the aggregation. To the best of our knowledge, our scheme is the first one that efficiently addresses the above issues all at once. Copyright © 2009 John Wiley & Sons, Ltd.

In-network data aggregation plays an important role to reduce the transmitting energy and data redundancy in large scale sensor networks. However, the security of wireless sensor networks is a challenging problem in the process of data aggregation. An efficient secure data aggregation is proposed to enhance the data security of wireless sensor networks. Firstly, the secure in-network aggregation tree is introduced, then a judgment method based on trust schema was used to detect whether a sensor node has potential misbehavior. After the detection, a local recovery schema is proposed to reduce the possibility to become isolated nodes, which will increase the security level in data aggregation in wireless sensor networks. The performance analysis shows the efficiency of the schema.

Wireless sensor networks (WSNs) is a class of wireless ad hoc networks in which sensor nodes sense, process, and communicate data acquired from the physical environment to an external-base-station (BS). But the fundamental challenge in the design of wireless sensor networks (WSNs) is to maximise their lifetimes especially when they have a limited and non-replenish able energy supply. Energy-efficient communication is necessary to increase the lifetime of the sensor network. In this work solutions are for the data gathering and routing problem with in network aggregation in WSNs. The aim of our work is to focus on data gathering and redundancy elimination with in-network aggregation in WSNs. The objective is to maximise the network lifetime by utilising data aggregation with redundancy removal by increasing accuracy thereby improving packet delivery ratio and reducing energy consumption. This work focuses on the maximum lifetime data gathering and routing to avoid packet loss in wireless sensor networks.

Problem statement: Wireless sensor networks, brings out variety of different challenges at energy level, integrity, authentication, communication cost. Approach: In the secure data aggregation techniques, reduction in the energy consumption was not elaborated in detail, since aggregator means of connection to sink was either direct or through other aggregators which need high energy level. Results: We suggest an Energy Constrained Secure Hierarchical Data Aggregation in Wireless Sensor Networks. At first the network was divided into clusters, each cluster begins with an aggregator and aggregator was connected to sink. Based on distance to sensor nodes and its energy level the aggregator detects the node. Separate keys were distributed to the two levels i.e., sensor node to the aggregator and aggregator to the sink. Whenever a data had to be sent from a sensor node to another node; initially the sensor node encrypts the data using a key and sends it to the aggregator. Conclusion/Recommendations: The digital signature algorithm that is based on the Elliptic Curve Digital Signature Algorithm is as secure and has reduced energy consumption.

In wireless sensor networks, sensor nodes have limited battery power. Data aggregation is an important technique in a wireless sensor network to reduce the energy consumption by eliminating the redundant data and delivering useful data to the user. Data aggregation technique is used to gather the data sensed by the sensor nodes in the network and aggregates the sensed data in an energy-efficient way so that overall network lifetime can be increased. Cluster, tree, chain, and grid are some of the architectures for data aggregation in wireless sensor networks. In this paper, authors present an analysis-based survey of data aggregation protocols for tree-based architecture in wireless sensor networks. The authors analyze each algorithm on the basis of performance measurements such as network lifetime, energy consumption, and node distance. Authors also compare these algorithms on the basis of the preferred parameter and a key feature of each algorithm. In the fifth section of the paper, authors described the proposed approach to construct the data aggregation tree to maximize the network lifetime. In the proposed approach, authors used distance parameter to construct minimum spanning tree, and other parameters such as load and energy are preferred in a balanced manner to reduce the energy consumption and to maximize the network lifetime.

Sensor networks are collection of sensor nodes which co-operatively send sensed data to base station. The major problem in the field of wireless network is draining of sensor's battery. As the senor nodes are driving high power so there is a need of an intelligent algorithm which could enable the sensors to utilize the energy in an energy efficient manner. It will also enable the network to work for longer duration of time as well as reduces trafficking inside network. Data Aggregation is a technique which can solve these problems. The main goal of data aggregation algorithms is to gather and aggregate data in an energy efficient manner so that network lifetime is enhanced. It involves the selective transfer of data from the nodes to the base station. Wireless sensor networks (WSN) offer an increasingly Sensor nodes need less power for processing as compared to transmitting data. It is preferable to do in network processing inside network and reduce packet size. One such approach is data aggregation which attractive method of data gathering in distributed system architectures and dynamic access via wireless connectivity. In this paper, a data aggregation framework on wireless sensor networks is presented. The framework works as a middleware for aggregating data measured by a number of nodes within a network. Also the paper briefly discusses a case of sending the temperature reading from the source node to the destination. It also provides techniques in order to send the minimum data at the cost of a small error. The aim of the proposed work is to compare the performance of SPIN in terms of energy efficiency in comparison with and without data aggregation in wireless sensor networks and to assess the suitability of the protocol in an environment where resources are limited.

This paper studies energy efficient routing for data aggregation in wireless sensor networks. Our goal is to maximize the lifetime of the network, given the energy constraint on each sensor node. Using linear programming (LP) formulation, we model this problem as a multicommodity flow problem, where a commodity represents the data generated from a sensor node and delivered to a base station. A fast approximate algorithm is presented, which is able to compute (1-e)-approximation to the optimal lifetime for any e > 0. Then along this baseline, we further study several advanced topics. First, we design an algorithm, which utilizes the unique characteristic of data aggregation, and is proved to reduce the running time of the fastest existing algorithm by a factor of K, K being the number of commodities. Second, we extend our algorithm to accommodate the same problem in the setting of multiple base stations, and study its impact on network lifetime improvement. All algorithms are evaluated through both solid theoretical analysis and extensive simulation results.

Data aggregation is an important method to reduce the energy consumption in wireless sensor networks (WSNs), however, performing data aggregation while preserving data confidentiality and integrity is mounting a challenge. The existing solutions either have large communication and computation overheads or produce inaccurate results. This paper proposes a novel secure data aggregation scheme based on homomorphic encryption in WSNs. The scheme adopts a symmetric-key homomorphic encryption to protect data privacy and combines it with homomorphic signature to check the aggregation data integrity. In addition, during the decryption of aggregated data, the base station is able to classify the encrypted and aggregated data based on the encryption keys. Simulation results and performance analysis show that our mechanism requires less communication and computation overheads than previously known methods. It can effectively preserve data privacy, check data integrity, and achieve high data transmission efficiency. Also, it performs accurate data aggregation rate while consuming less energy to prolong network lifetime.

The wireless communication nature of remotely deployed sensor nodes make the attacks more easily to be happened in wireless sensor networks (WSNs). But traditional security algorithms are infeasible in WSNs due to the limited computing, communication power, storage, band width and energy of sensor nodes. So energy efficient secure data aggregation schemes are necessary in resource constrained WSNs. Concealed Data Aggregation (CDA) based on privacy homomorphism (PH) gives a critical solution for energy efficient secure data aggregation in WSNs. PH based algorithms allow aggregation to be happened on cipher texts. Thus, it eliminates the power consuming decryption operations at the aggregator node for the data aggregation and further encryption for the secure transmission of aggregated data. It also avoids the aggregator node from the burden of keeping the secret key information and thereby it achieves energy efficiency and reduces the frequency of node compromise attacks in aggregator nodes. Among the CDA techniques, asymmetric PH based CDA techniques are exploring due to their combination with elliptic curve cryptography having reduced key size. We present an overview of asymmetric concealed data aggregation techniques that achieve both end to end data confidentiality and non delayed data aggregation.