MDA-SMuSha: An Efficient and Flexible Multi-Dimensional Data Aggregation Scheme for Privacy-Preservation in Smart Grids

Recent development of smart cities includes advanced and necessary use of modern smart grid (SG), than the traditional power grid. The paradigm of SG has also transformed houses into a home area networks (HAN). In HAN, several smart devices and appliances are connected to the electricity control centers (ECC). Appliances share their load and consumption related information to ECC through smart meters. The consumption data may be used for supply-demand management, for example, by ramping production up or down as needed. However, security and privacy of the consumers data are greatly important, since fine-grained smart meter data may reveal an users presence/absence in his/her house. To address this issue, several public-key-based or identity-based data aggregation schemes have been proposed in the literature. However, most of such schemes either suffer from the complexity of certificate management or key escrow problem. To eliminate these issues, in this paper we propose an efficient certificate-based data aggregation (CB-DA) scheme. In the proposed CB-DA scheme, the owner selects a secret key and then use the secret key along with certificates as decryption/signing keys.

Efficient power management in smart grid relies on collecting fine-grained power consumption data from users. However, these data may reveal sensitive information about individuals' habits and lifestyles. Various multidimensional data aggregation schemes leveraging public key encryption (PKE) algorithms have been proposed to address this problem. Never theless, most of these schemes come with significant performance costs. In addition, if the secret key of a smart meter was leaked, the confidentiality of encrypted user power data could be at risk. In this article, we propose a lightweight, multidimensional, and privacy-preserving data aggregation scheme with fault-tolerance and key-leakage resilience for smart grid without relying on a trusted third party (TTP), named FKLM-PDA, in which a novel data packaging method that transforms users' multidimensional data into a one-dimensional format is designed, enabling data center parse aggregated results in each dimension, reducing computation and communication costs. For better efficiency, an effective encryption algorithm is proposed to replace the expensive additive homomorphic PKE, like the Paillier cryptosystem, which combines a random masking with secret-sharing based key separation, ensuring threshold key-leakage resilience under a bounded, non-colluding leakage model. Furthermore, not only does FKLM-PDA enhance the fault tolerance mechanism of data transmission from smart meters to a corresponding fog node, but also it supports dynamic user management for joining and exiting improving scalability. Security analysis confirms that FKLM-PDA is privacy-preserving and secure while guaranteeing key-leakage resilience, fault tolerance, authentication, and data integrity. Through performance evaluations, FKLM-PDA outper forms the existing schemes and is superior in computation and functional in communication.

Privacy-preserving data aggregation (P2DA) is an important basic building block that can protect consumer’s privacy in the smart grid environment because it could be used to prevent the extraction of the electricity consumption information of a specific consumer. Due to this important function, the P2DA scheme for the smart grid has attracted a lot of attention from both academic and industry researchers who have proposed many P2DA schemes for the smart grid in recent years. However, most of these P2DA schemes are not secure against internal attackers or cannot provide data integrity. Besides, their computation costs are not satisfactory because the bilinear pairing operation or the hash-to-point operation is performed at the smart meter’s side. To address the deficiencies of previous schemes, we propose a new P2DA scheme against internal attackers using Boneh–Goh–Nissim public key cryptography. The proposed P2DA scheme does not use bilinear pairing or hash-to-point operation making it be more computationally efficient than previous P2DA schemes. We also show that the proposed P2DA scheme is provably secure and can meet various security requirements.

Smart grid, characterized by high efficiency, security, and flexibility, is gradually replacing the traditional power grid. Data aggregation technology is frequently used to avoid user privacy disclosure as a result of power consumption data transmission in the smart grid. However, traditional one-dimensional data aggregation schemes fail to meet the demands of fine-grained analysis. Therefore, this paper proposes an efficient privacy-preserving multi-dimensional data aggregation (P 2 MDA) scheme in smart grid by virtue of homomorphic encryption and superincreasing sequence. The security analysis indicates that the proposed scheme is proved to be secure in the random oracle model, satisfying all security and privacy requirements. The extensive performance analysis shows that in comparison to the related schemes, the proposed scheme achieves lowest computation and communication costs, thus appropriate for practical applications.

Reducing the power supply-demand gap and increasing reliability of power supply are the challenges of current energy management. Implementation of smart grid, smart meters and smart metering can be a possible solution for power demand reduction, efficient power supply management, and optimization of management resource usages. Smart meters include sophisticated measurement and calculation hardware, software, calibration and communication capabilities. For interoperability within a smart grid infrastructure, smart meters are designed to perform functions, and store and communicate data according to certain standards. In this work we discuss smart meter and various elements of smart metering, current state of the technologies related to smart grid, smart meter, advanced metering infrastructure (AMI), and meter data flow in smart grid. We also discuss standards related to smart meter, meter data format and data transmission, functions of smart meter, and functionalities of smart meters, currently deployed by utilities around the world.

As a next-generation power system, the smart grid can implement fine-grained smart metering data collection to optimize energy utilization. Smart meters face serious security challenges, such as a trusted third party or a trusted authority being attacked, which leads to the disclosure of user privacy. Blockchain provides a viable solution that can use its key technologies to solve this problem. Blockchain is a new type of decentralized protocol that does not require a trusted third party or a central authority. Therefore, this paper proposes a decentralized privacy-preserving data aggregation (DPPDA) scheme for smart grid based on blockchain. In this scheme, the leader election algorithm is used to select a smart meter in the residential area as a mining node to build a block. The node adopts Paillier cryptosystem algorithm to aggregate the user’s power consumption data. Boneh-Lynn-Shacham short signature and SHA-256 function are applied to ensure the confidentiality and integrity of user data, which is convenient for billing and power regulation. The scheme protects user privacy data while achieving decentralization, without relying on TTP or CA. Security analysis shows that our scheme meets the security and privacy requirements of smart grid data aggregation. The experimental results show that this scheme is more efficient than existing competing schemes in terms of computation and communication overhead.

SummaryIn smart grid, bidirectional communications between the smart meters and control center are subject to several security challenges. Since the smart meters have limited storage space and processing capability, the suggested communication scheme not only must consider the security requirements but also should put the least possible burden on the smart meters' resources. In 2014, an interesting communication scheme has been proposed for the secure consumption reports transmission of the smart meters to the neighbor gateways. In this paper, we first show that this scheme is vulnerable to the smart meter's memory modification, pollution, and denial of service attacks; then, we propose an authenticated communication scheme, which not only is secure against the aforementioned attacks, but also is much more efficient in terms of storage space, communication overhead, and computational complexity. Moreover, our scheme also presents the details of control messages transmission from the neighborhood gateways to the smart meters. Our comparative analysis with several recently published schemes indicates that the proposed scheme is more suitable than the previous ones. More significantly, our realistic implementation on ATmega2560, as a suitable candidate to be used for the smart meters, confirms our claim.

Smart grids allow automated meter readings and facilitate two-way communications between the smart meters and utility control centers. As the smart grid becomes more intelligent, it becomes increasingly vulnerable to cyber-attacks. Smart grid security mainly focuses on mutual authentication and key management techniques. An impeding factor in grid security is the memory and processing constraints of the smart meters. The aim of this thesis is to propose a lightweight mutual authentication protocol with an effective key renewal mechanism between a residential smart meter and a gateway. The authentication protocol proposed in the thesis, guarantees source authentication, data integrity, message confidentiality, as well as non-repudiation. The security analysis renders this protocol robust against several attacks. Furthermore, its performance analysis provides meticulous results as to how the proposed protocol is efficient in terms of computation overhead, average delay and buffer occupancy at the gateway.

Fog-enabled secure multiparty computation based aggregation scheme in smart grid

The smart meters in electricity grids enable fine-grained consumption monitoring. Thus, suppliers could adjust their tariffs. However, as smart meters are deployed within the smart grid field, authentication and key establishment between smart grid parties (smart meters, aggregators, and servers) become an urgency. Besides, as privacy is becoming a big concern for smart meters, smart grid parties are reluctant to leak their real identities during the authentication phase. In this paper, we analyze the recent authentication schemes in smart grids and other applied fields, and propose an anonymous authentication and key establishment scheme between smart grid parties: FAuth. The proposed scheme is based on bilinear maps and the computational Diffie–Hellman problem. We changed the way the smart meter parties registered at Key Generation Center, making the proposed scheme robust against various potential attacks that could be launched by the Key Generation Center, as the scheme could avoid the private key of the smart meter parties from leaking to the Key Generation Center. Besides, the proposed scheme reduced the computational load, both at the smart meter side and at the aggregator side, which make it perfectly suitable for computation-constrained devices. Security proof results show the proposed scheme is secure under the BAN logic and random oracle model.

An efficient dependable smart power grid relies on the secure real-time data collection and transmission service provided by a monitoring system. In such a system, the measuring units, such as phasor measurement units (PMUs) and smart meters (SMs), are critical. These measuring equipments function as sensors in the smart grid. Data exchanges between these sensors and the central controller are protected by various security protocols. These protocols usually contain computationally intensive cryptographic algorithms that cause heavy energy overhead to the sensor nodes. Since PMUs and SMs are mostly energy-constrained, the problem of how to ensure the secure communication with minimum energy cost becomes a critical issue for the functionality of the whole smart grid. In this article, we focus on the low power secure communication of the PMUs and SMs. We take two wireless sensor platforms as examples to experimentally investigate the approaches and principles of reconciling the two conflicting system requirements-communication security and low energy consumptions. The proposed methods are general ones and applicable to other energy-constrained yet security sensitive systems.

Smart grid (SG) is an efficient electrical grid that provides opportunities to manage the energy load in a reliable and efficient way. Moreover, smart meters (SMs) are introduced, which play a vital role in communication between homes and SG. SMs manage and monitor the energy consumption of homes. SGs and SMs produce a big data, which is very hard to store and process even with cloud computing. For this purpose fog computing concept is introduced, which provides a good environment for computing and storing the data of SGs and SMs before transmitting them to cloud. The concept of fog computing, acts as a bridge between cloud and SGs. In this paper, a cloud-fog based architecture is integrated with SG for efficient energy management of buildings with SMs. To manage the energy requirements of consumers, micro grids (MGs) are available near to the buildings. Fogs are distributed over the world, overhaul the cloud via important features, including low latency and increased security for MGs. To balance the load on cloud and fogs, three load balancing algorithms are used. These algorithms are round robin (RR), throttled and greedy. Closest datacenter policy is used to compare their results. Greedy gives better results than RR and throttled.

Secured gateway based communication in heterogeneous SM –neighbourhood area network in smart grid using FPGA design

Nowadays, electricity companies have started applying smart grid in their systems rather than the conventional electrical grid (manual grid). Smart grid produces an efficient and effective energy management and control, reduces the cost of production, saves energy and it is more reliable compared to the conventional grid. As an advanced energy meter, smart meters can measure the power consumption as well as monitor and control electrical devices. Smart meters have been adopted in many countries since the 2000s as they provide economic, social and environmental benefits for multiple stakeholders. The design of smart meter can be customized depending on the customer and the utility company needs. There are different sensors and devices supported by dedicated communication infrastructure which can be utilized to implement smart meters. This paper presents a study of the challenges associated with smart meters, smart homes and smart grids as an effort to highlight opportunities for emerging research and industrial solutions.

Traditional electric generation based on fossil fuel consumption threatens the humanity with global warming, climate change, and increased carbon emission. Renewable resources such as wind or solar power are the solution to these problems. The smart grid is the only choice to integrate green power resources into the energy distribution system, control power usage, and balance energy load. Smart grids employ smart meters which are responsible for two-way flows of electricity information to monitor and manage the electricity consumption. In a large smart grid, smart meters produce tremendous amount of data that are hard to process, analyze and store even with cloud computing. Fog computing is an environment that offers a place for collecting, computing and storing smart meter data before transmitting them to the cloud. This environment acts as a bridge in the middle of the smart grid and the cloud. It is geographically distributed and overhauls cloud computing via additional capabilities including reduced latency, increased privacy and locality for smart grids. This study overviews fog computing in smart grids by analyzing its capabilities and issues. It presents the state-of-the-art in area, defines a fog computing based smart grid and, gives a use case scenario for the proposed model.