MDSA: Multi-dimensional slotted ALOHA MAC protocol for low-collision high-throughput wireless communication systems

In this paper we propose a simple relay enabled medium access (SRMAC) protocol that enables cooperative relay transmissions. Due to the wireless signal power attenuation with distance, using a relay in a wireless network can make wireless networking more bandwidth efficient at the expense of requiring multiple transmissions for a single packet. Standard MAC protocols such as the IEEE 802.11 MAC protocol, while useable with relaying, however are not designed explicitly for relay communication. When IEEE 802.11 MAC protocol is used for cooperative communication such a relaying, each packet transmission would need to separately contend for the channel via a channel access procedure which can use significant resources (both energy and bandwidth). Because using a single relay requires two transmissions, an efficient medium access control (MAC) protocol that supports two hop transmission is needed. We introduce a protocol, SRMAC, which is a simple cooperative MAC protocol that utilizes information from the physical layer for the MAC operation of relay networks. We consider the bandwidth efficiency of SRMAC protocol considering both the physical layer and MAC layer. The SRMAC protocol includes the possibility of both cooperative transmission and direct transmission. With SRMAC, cooperative transmission (relaying) can be dynamically chosen when it is more beneficial than direct transmission. The SRMAC protocol can improve the throughput by up to 20% compared to conventional MAC protocols.

Power efficient ultra-wideband based wireless communication for wireless body area network applications

Medium Access Control (MAC) protocol is one of the key network protocols that ensure Wireless Sensor Networks (WSNs) maintain high performance during communication. MAC protocol design plays an important role in improving the performances of the whole network. First, Wireless Passive Sensor Networks (WPSNs) and MAC protocols are introduced in this paper. Second, some existing MAC protocols are introduced. Sensor MAC (S-MAC) protocol is analyzed and existing improved backoff algorithms are introduced. A new MAC protocol called Improved Sensor MAC (IS-MAC) is then proposed to solve the problem that the contention window (CW) during carrier sense is fixed in S-MAC protocol. IS-MAC protocol is able to adjust CW in terms of network load, so energy consumption can be decreased. Finally, according to the simulation results on NS2, the proposed protocol has better performance in terms of throughput and energy consumption.

Medium access control (MAC) protocols provide a means to nodes to access the wireless medium efficiently and collision free to the best of their ability. In this paper we provide a survey of MAC protocols developed for mobile ad hoc (MANETs) in the past based on certain methods and techniques such as multiple radios, multiple channels and specialized beamforming antennas. We discuss some of the MAC protocols designed for wireless sensor networks (WSNs) and their applicability in a MANET environment. There are some similarities between MANETs and WSN's in general but there is also critical differences between the two that affect the design of MAC protocols for both these networks. Traditionally, MAC protocols have been classified on the basis of two broad categories of contention free and contention based MAC protocols but a number of new algorithms proposed in the recent past merge the two schemes together in a single MAC solution and thus there is a need for a new classification approach. MANETs have their unique constraints and characteristics. In this classification, we will discuss various MAC solutions proposed in the past in the light of these constraints and characteristics. We do not intend to explain each and every protocol since the number of MAC solutions proposed in the past decade or so is very large. The purpose of this article is to give the readers a general idea on the various techniques and methods used in literature to develop MAC protocols for MANETs. The techniques range from algorithmic changes such as cross-layer design to enhancement in hardware such as directional antennas.

The key contributions of this paper are the proposed Pure Collective Aloha (PCA) medium access control (MAC) protocol with multilevel powers and its closed-form theoretical analysis. The PCA MAC protocol collects a batch of packets before transmitting these packets sequentially in the channel. The key idea in the design of this PCA MAC protocol with multilevel powers is to spread out the arrivals of each batch of packets in a channel and the multilevel powers of the packets received at the receiver allow capture for the case of the strongest signal power packet among the overlapping lower signal power packets to be successfully received at the receiver. If it is the only received packet, it is successfully received, regardless of its received power level. The PCA MAC protocol with multilevel powers is analyzed theoretically. The explicit closed-form expressions for the optimal offered loads and the maximum throughputs of the Pure Aloha, the Slotted Aloha and the PCA MAC protocols with multilevel powers are presented. The numerical results show that the throughput of the asynchronous PCA MAC protocol with multilevel powers is about 90.5% better than that of the asynchronous Pure Aloha MAC protocol with multilevel powers and can approach the maximum throughput bound of the synchronous Slotted Aloha MAC protocol with multilevel powers, without the need of any synchronization mechanism to slot boundaries.

Since cognitive wireless network (CRN) has the characteristic of secondary use, it can enable the device to dynamically access available spectrum without interference to primary users (PUs), which can effectively alleviate contradiction between the lack of spectrum resources and the growing demand for wireless access. However, Medium Access Control (MAC) protocol as CRN core components, can achieve competition access of the licensed spectrum and coordination control, which will maximize spectrum utilization efficiency and network throughput. The contribution of this survey is threefold. First, we analyze the characteristics of the existed multi- channel MAC protocol in CRN; Second, according to the different ways of spectrum access in CRNs, the multi-channel MAC protocols are classified into time-slotted based MAC protocol, control channel based MAC protocol and hybrid MAC protocol, and the paper emphatically analyzed the advantages and disadvantages of these multi-channel MAC protocols; Finally, the paper explores the difficulties and the challenges of multi-channel MAC protocols design in cognitive wireless network.

Two important criteria of wireless body area networks (WBANs) are low power consumption and delay. These criteria can be met by designing efficient medium access control (MAC) protocols. In this paper, two TDMA-based MAC protocols are proposed. The first protocol, TM–MAC makes use of only a main radio. The second proposed protocol, TWM–MAC makes use of a WUR alongside the main radio. The two proposed protocols are compared with different categories of standard MAC protocols and it is shown that they outperform the standard ones by improving the power consumption and delay. The TWM–MAC consumes 55% less power consumption than the Scheduled Channel Polling MAC (SCP–MAC) protocol for a high traffic scenario on the high-rate platform while the TM-MAC consumes 85% less power consumption than the SCP–MAC. For a low traffic scenario, the TWM–MAC performs 53.5% better than the SCP–MAC protocol and 77.5% better than the very low power MAC (VLPM) protocol on the high and low-rate platforms respectively. An improvement in delay was observed with the TWM–MAC protocol for high traffic situations. The TWM–MAC protocol surpasses the VLPM protocol by 81.1% in terms of latency for a high traffic scenario and 3.2% for a low traffic scenario.

The industrial Internet of Things (IIoT) depends on wireless sensor networks (WSNs) to enable low‐power, low‐data‐rate communication in resource‐limited settings. While the IEEE 802.15.4 standard provides the communication foundation, its medium access control (MAC) protocols face challenges including energy consumption, latency, scalability, and adaptability. Traditional MAC protocols cannot keep up with the demands of IIoT networks as the number of connected devices continues to increase. Therefore, edge artificial intelligence (Edge AI) and tiny machine learning (TinyML) represent emerging approaches that show potential for improving the performance of traditional MAC protocols directly on IIoT devices. Edge AI and TinyML allow intelligent decision‐making at the edge, which enables efficient data processing and adaptability to the environment without the need for cloud infrastructure, which may reduce latency and energy consumption. This paper systematically examines the emerging paradigm of combining Edge AI and TinyML to improve MAC protocols for WSNs in IIoT networks. We explore advanced machine learning (ML) methods applicable to resource‐limited devices, and we investigate how these methods can improve key performance metrics for MAC protocols, including energy efficiency, throughput, and network lifetime. We also discuss the challenges and limitations of applying AI solutions in WSNs, including computational constraints, data scarcity, and model scalability. Finally, we propose potential future research directions to improve the application of AI and ML techniques to develop more efficient, adaptive, and intelligent MAC protocols for future IIoT networks.

The properties of underwater acoustic channel are quite different from those of terrestrial wireless sensor networks, which brings many challenges to design an efficient media access control (MAC) protocol for underwater acoustic sensor networks (UWASNs). In order to overcome the long propagation delay and the funneling effect of UWASNs, a MAC protocol, named path-oriented code assignment (POCA) CDMA MAC (POCA-CDMA-MAC) protocol, is proposed in the paper. In the proposed protocol, a round-robin method and the CDMA technology are used to make the sink receive packets from multiple neighbors at the same time. Unlike other CDMA-based protocols using the transmitter-oriented code assignment (TOCA) or the receiver-oriented code assignment (ROCA), the POCA is used in the CDMA technology. Since the number of the path is much less than the number of nodes, the length of the spreading code used in systems with POCA is greatly shorter than those of the spreading code used in systems with TOCA or ROCA. Simulation results show that compared to existing MAC protocols for UWASNs, the proposed MAC protocol achieves a higher throughput, and a lower end-to-end delay.

Health monitoring using biomedical sensors has witnessed significant attention in recent past due to the evolution of a new research area in sensor network known as Wireless Body Area Networks (WBANs). In WBANs, a number of implantable, wearable, and off-body biomedical sensors are utilized to monitor various vital signs of patient’s body for early detection, and medication of grave diseases. In literature, a number of Medium Access Control (MAC) protocols for WBANs have been suggested for addressing the unique challenges related to reliability, delay, collision and energy in the new research area. The design of MAC protocols is based on multiple access techniques. Understanding the basis of MAC protocol designs for identifying their design objectives in broader perspective, is a quite challenging task. In this context, this paper qualitatively reviews MAC protocols for WBANs. Firstly, 802.15.4 and 802.15.6 based MAC Superframe structures are investigated focusing on design objectives. Secondly, different multiple access techniques such as TDMA, CSMA/CA, Slotted Aloha and Hybrid are explored in terms of design goals. Thirdly, a two-layered taxonomy is presented for MAC protocols. First layer classification is based on multiple access techniques, whereas second layer classification is based on design objectives and characteristics of MAC protocols. Critical and qualitative analysis is carried out for each considered MAC protocol. Comparative study of different MAC protocols is also performed. Finally, some open research challenges in the area are identified with initial research directions.

In this paper, we propose a detailed energy survey of the physical, data link, and network layer by analytical techniques. We also show the impact of regular sleep periods on node energy consumption and present a comparison analysis of single-hop vs. multi-hop communications in the energy realm. A detailed energy expenditure analysis of not only the physical layer but also the link and network layer provides a basis for developing new energy efficient wireless sensor networks. Regular, coordinated sleeping extends the lifetime of sensor nodes, but systems can only benefit from sleeping in terms of transmitted packets if the data arrival rate to the system is low. Energy efficiency is the driving motivation for it can be considered the most important factor for wireless sensor networks because of the power constraints set by battery operation. Radio solutions in the lower ISM bands are attractive because of their relatively easy implementation and low power consumption. However, the data rates of these commercial radios are also relatively low, limiting transmittable frame sizes to a few tens of octets along with strict duty cycle requirements. From the analysis we extract key parameters of selected MAC protocols and show that some traditional mechanisms, such as binary exponential backoff, have some inherent problems. We also argue that single-hop communications has up todo% lower energy consumption than multi-hop forwarding within the feasible transmission distances of an ISM radio. Index Terms-Energy efficiency, Wireless sensor net- works, Medium access control (MAC) protocols, multi-hop communications a duty cycIe (Z), (3), which is normally 10% for the 434MHz band and 1% for the 868MHz band. The duty cycle is defined as the ratio, expressed as a percentage, of the maximum transmitter on-time, relative to a one hour period. When a sensor network is expected to work continuously, this duty cycle has to be taken into account and it can affect the energy efficiency of a network. In this paper we perform cross-layer analysis by pre- senting topology, medium access control (MAC) and ra- dio transceiver energy consumption models that work in unison. The hear topology model represents a common network after network layer route discovery has been accomplished. We use an energy consumption model for the transmission and reception of MAC frames originally presented in (4), develop a coordinated sleep group energy consumption model, and analytically investigate the effect of sleep on sensor networks using three MAC protocols. From the analysis we show that although in an ideal scenario multi-hop communications perform better than single-hop communications, realistic energy models and especially the MAC protocol design have a significant impact. We propose a multi-group sleep model for our nanoMAC protocol, and show that reg- ular sleep periods have a significant, energy reducing impact on node energy consumption with low traf!fic rates. The radio transceiver energy model takes into account several important radio parameters and we use the RFM TRlOOO and RFM radio designers guide (5) for realistic transceiver parameters. The main metric used is absolute energy, consumption per useful transmitted bit. This means only the MAC or thc network protocol data unit (PDU) will be considered and all the other communicated bits, headers, control frames, preambles, etc. are considered as overhead. The rest of the paper is organized as follows. Some related work is discussed in Section IT and in Section 111 we look at the radio propagation energy model. Section TV presents the network topology and energy

High throughput and fair resource sharing are two of the most important objectives in designing a medium access control (MAC) protocol. Currently, most MAC protocols including IEEE 802.11 DCF adopt a random access based approach in a distributed manner in order to coordinate the wireless channel accesses among competing stations. In this paper, we first identify that a random access–based MAC protocol may suffer from MAC protocol overhead such as a random backoff for data transmission and a collision among simultaneously transmitting stations. Then, we propose a new MAC protocol, called sequential coordination function (SCF), which coordinates every station to send a data frame sequentially one after another in a distributed manner. By defining a service period and a joining period, the SCF eliminates unnecessary contentions during the service period, and by explicitly determining the sequence of frame transmission for each stations, it reduces collision occurrences and ensures fairness among stations in the service period. The performance of SCF is investigated through intensive simulations, which show that the SCF achieves higher throughput and fairness performances than other existing MAC protocols in a wide range of the traffic load and the number of stations.

Highly dynamic geographical topology, two-direction mobility, and varying traffic density can lead to fairness issues in Vehicular Ad-hoc Networks (VANETs). The Medium Access Control (MAC) protocol plays a vital role in sharing the common wireless channel efficiently between vehicles in a VANET system. However, ensuring fairness between vehicles can be a challenge in designing MAC protocols for VANET systems. The existing protocol, IEEE 802.11 DCF, ensures that the packet transmission rate for a particular vehicle is directly proportional to the amount of time a vehicle spends within a service area, but it does not guarantee that faster vehicles will be able to send the minimum number of packets. Other existing MAC protocols based on IEEE 802.11 are able to provide a minimum amount of data transmission regardless of velocity, but are unable to provide an amount of data transmission that is more proportionate to the time a vehicle spends in the service area. To address the above limitations, we propose a Speed Aware Fairness Enabled MAC (SAFE-MAC) protocol that calculates the residence time of a vehicle in a service area by using mobility metrics such as position, direction, and speed to synthesize the transmission probability of each individual vehicle with respect to its residence time. This is achieved by dynamically altering the values of parameters such as minimum contention window, maximum backoff stage, and retransmission limit in the MAC protocol. We then develop an analytical model to compare the performance of our proposed protocol with contemporary MAC protocols. Numerical analysis results show that our proposed protocol significantly improves fairness among the speed-varying vehicles in VANET.

Cognitive Radio (CR) exploits underutilized licensed spectrums to improve its bandwidth availability. Using CR technology, a node is able to adapt its transmission and reception radio parameters including channel frequency dynamically according to local spectrum availability. For channel access between wireless nodes, a cognitive Medium Access Control (MAC) protocol is necessary to coordinate the CRs. Multi-channel MAC protocol extensions have been proposed in IEEE802.11 to enable a node to operate in multiple channels in order to improve network-wide throughput. These multi-channel MAC protocols have several functions that can be leveraged by cognitive MAC protocols due to their similarities in certain aspects, though the CR has an additional requirement to cope with the existence of licensed users that have higher authority over the channels. Current research in cognitive MAC protocols assumes the availability of a common control channel at all times, which is an approach in the multi-channel MAC protocols. This approach has certain hardware requirements that may not be readily available at CR nodes. Hence, other approached may be necessary. In this paper, various types of multi-channel MAC protocols are reviewed, followed by discussion of their merits and demerits in multi-channel environments. The purpose is to show the additional functionalities and challenges that each multi-channel MAC protocol has to offer and address in order to operate in multihop CR networks. By providing discussion on possible technology leverage from multi-channel to cognitive MAC protocols, we aim to establish a foundation for further research and discussion.

Wireless Body Area Networks (WBANs) were designed to collect and transfer vital physiological parameters within a short distance of the human body by employing low-power, light-weight, small-sized and smart implantable or wearable sensor devices. Lately, WBANs are expected to support various types of applications with data rates from a few Kbps upto 10 Mbps and satisfy the heterogeneous requirements of both medical and consumer electronics applications. Hence, novel communication protocols that consider a unique set of constraints and demands of these networks need to be developed to provide optimum system efficiency and data transmission reliability. As the IEEE 802.15.6 Medium Access Control (MAC) protocol based on the latest WBANs standard, cannot maintain the balance between the strict energy limitation and Quality of Service (QoS) requirements of such networks, this paper focuses on developing MAC protocols to improve the performance of WBANs specifically in the saturation condition. Two IEEE802.15.6-based MAC protocols are proposed to enhance channel access for the highest user priority and the other user priorities in saturated networks. The simulation results show better network performance as well as lower energy consumption in the proposed MAC protocols compared to the IEEE 802.15.6 MAC protocol.