Mean-field-type optimization for demand-supply management under operational constraints in smart grid

This article presents a unified approach to simultaneous solution of optimization and optimal control problems in batch distillation, operating under different modes of operation: variable, constant, or optimal reflux. The simplified, computationally efficient short‐cut method and a novel algorithm to solve the optimal control problems in batch distillation is the basis of this unified approach. The short‐cut method identifies the feasible region of operation essential for optimization and optimal control problems, and provides analytical partial derivatives of the model parameters crucial to the solution.The new algorithm for the solution of optimal combination of the maximum principle and NLP optimization techniques. It circumvents the problems associated with the maximum principle approach (iterative solution of a two‐point boundary value problem, undounded control variables, and inability to handle the simultaneous optimization and optimal control problem), and the coupled ODE discretization‐NLP optimization scheme for nonlinear models (higher system nonlinearities, multiplicity of solutions, sensitivity of convergence to initial guesses). This algorithm reduces the dimensionality of the problem, and the nature of the algorithm allows a common platform to optimal solutions of different operating conditions. This article also shows that different categories of the optimal control problems in batch distillation essentially involve the solution of the maximum distillate problem.

In general, optimal control problems rely on numerically rather than analytically solving methods, due to their nonlinearities. The direct method, one of the numerically solving methods, is mainly to transform the optimal control problem into a nonlinear optimization problem with finite dimensions, via discretizing the objective functional and the forced dynamical equations directly. However, in the procedure of the direct method, the classical discretizations of the forced equations will reduce or affect the accuracy of the resulting optimization problem as well as the discrete optimal control. In view of this fact, more accurate and efficient numerical algorithms should be employed to approximate the forced dynamical equations. As verified, the discrete variational difference schemes for forced Birkhoffian systems exhibit excellent numerical behaviors in terms of high accuracy, long-time stability and precise energy prediction. Thus, the forced dynamical equations in optimal control problems, after being represented as forced Birkhoffian equations, can be discretized according to the discrete variational difference schemes for forced Birkhoffian systems. Compared with the method of employing traditional difference schemes to discretize the forced dynamical equations, this way yields faithful nonlinear optimization problems and consequently gives accurate and efficient discrete optimal control. Subsequently, in the paper we are to apply the proposed method of numerically solving optimal control problems to the rendezvous and docking problem of spacecrafts. First, we make a reasonable simplification, i.e., the rendezvous and docking process of two spacecrafts is reduced to the problem of optimally transferring the chaser spacecraft with a continuously acting force from one circular orbit around the Earth to another one. During this transfer, the goal is to minimize the control effort. Second, the dynamical equations of the chaser spacecraft are represented as the form of the forced Birkhoffian equation. Then in this case, the discrete variational difference scheme for forced Birkhoffian system can be employed to discretize the chaser spacecraft's equations of motion. With further discretizing the control effort and the boundary conditions, the resulting nonlinear optimization problem is obtained. Finally, the optimization problem is solved directly by the nonlinear programming method and then the discrete optimal control is achieved. The obtained optimal control is efficient enough to realize the rendezvous and docking process, even though it is only an approximation of the continuous one. Simulation results fully verify the efficiency of the proposed method for numerically solving optimal control problems, if the fact that the time step is chosen to be very large to limit the dimension of the optimization problem is noted.

Against the backdrop of a global shift towards renewable energy sources (RES) and the increasing complexity of modern power grids, smart grids (SGs) emerge as a critical solution for enhancing efficiency, reliability, and sustainability. This paper reviews a total of 177 key references published between 2014 and 2024, providing a comprehensive analysis of the most recent advancements in SG technologies and their pivotal role in shaping the future of power systems. The research explores the multifaceted components of SGs, encompassing intelligent sensing, communication technologies, home energy management systems, demand-side management, smart metering, smart electric vehicle charging, smart lighting, the Internet of Things, and the integration of big data, while investigating their role in enhancing the power grid in a smart and digitally integrated manner. The paper also discusses the SG features that have developed and improved the transmission and distribution networks, as well as the ancillary services on a grid-scale introduced through digitization. In addition, the status of the investment in SG is highlighted. The electrification of the global economy, driven by the urgent need to integrate RES, prompted an 8% increase in electricity grid investment in 2022. Additionally, digital technology investments for the grid constituted 19% of the total grid investment in the same year. SGs stand at the forefront of this transformation, playing a central role in facilitating the integration of variable RES, implementing digital technologies, smart devices, and optimizing power systems for diverse sectors. Despite substantial progress, some challenges persist that need further attention to ensure the seamless integration of SG technologies. The findings underscore the pivotal role of SGs in enhancing energy efficiency, effectively managing distributed energy resources, and strengthening the resilience of power systems. In conclusion, the recent advancements in SGs mark a transformative era for the power sector. However, to fully unlock their potential, it is essential to address the key challenges that hinder their seamless integration. Accordingly, these challenges are outlined to guide future research in developing innovative solutions that further optimize and advance the capabilities of SGs.

Decomposition method for solving two optimal control problems and one optimization problem in batch fermentation is proposed. The problems are formulated based on a nonstructured mathematical model with slowly varying parameters and a finite cost criterion of maximum end production. Dependence of the model parameters on one physical or chemical parameter, which could easily be used as a control input is introduced analytically in the model equations and three model descriptions are obtained by nonlinear difference equations. Sensitivity functions of state trajectories towards slowly varying coefficients are introduced to account for model uncertainties. Based on them extended optimal control and optimization problems are formulated.

To address the challenges faced by modern power systems—such as efficiency, dynamics, reliability, control, stability, economy and planning—significant efforts have been made to develop advanced techniques, tools and scientific innovations across various disciplines. Among these, the ‘digital twin’ (DT) has emerged as one of the most reliable and rapidly evolving technologies, now widely integrated into diverse applications. The incorporation of DT technology into energy systems marks a paradigm shift in achieving sustainable, efficient and resilient modern power grids. Although considerable research has been conducted on DT applications in the power sector, comprehensive reviews of its role in transforming power grids to accommodate high levels of renewable energy sources (RESs), smart grid technologies, vehicle‐to‐grid (V2G) systems and energy storage solutions remain limited. This paper seeks to bridge that gap by exploring the critical role of DT technology in this transformation. It examines the historical evolution, fundamental components and diverse applications of DT technology across modern grid systems. Detailed analyses focus on DT's application in modernising power grids, particularly in RES integration, energy storage, transmission and distribution, smart grid advancements and V2G systems. Additionally, the paper reviews progress, investments, standards, regulations and the key stakeholders driving DT advancements in power grids. Finally, major challenges, limitations and future perspectives for DT applications in next‐generation power grids are discussed. Key findings reveal that while DT technology delivers significant benefits—such as improved operational efficiency, enhanced grid stability, greater reliability, cost reduction, cybersecurity and resilience through real‐time monitoring, predictive maintenance and optimised energy management—addressing existing limitations is crucial to maximising DT's potential in advancing and modernising sustainable power grids.

1 A Survey on Computational Optimal Control.- Issues in the Direct Transcription of Optimal Control Problems to Sparse Nonlinear Programs.- Optimization in Control of Robots.- Large-scale SQP Methods and their Application in Trajectory Optimization.- Solving Optimal Control and Pursuit-Evasion Game Problems of High Complexity.- 2 Theoretical Aspects of Optimal Control and Nonlinear Programming.- Continuation Methods In Boundary Value Problems.- Second Order Optimality Conditions for Singular Extremals.- Synthesis of Adaptive Optimal Controls for Linear Dynamic Systems.- Control Applications of Reduced SQP Methods.- Time Optimal Control of Mechanical Systems.- 3 Algorithms for Optimal Control Calculations.- Second Order Algorithm for Time Optimal Control of a Linear System.- An SQP-type Solution Method for Constrained Discrete-Time Optimal Control Problems.- Numerical Methods for Solving Differential Games, Prospective Applications to Technical Problems.- Construction of the Optimal Feedback Controller for Constrained Optimal Control Problems with Unknown Disturbances.- Repetitive Optimization for Predictive Control of Dynamic Systems under Uncertainty.- Optimal Control of Multistage Systems Described by High-Index Differential-Algebraic Equations.- A New Class of a High Order Interior Point Method for the Solution of Convex Semiinfinite Optimization Problems.- A Structured Interior Point SQP Method for Nonlinear Optimal Control Problems.- 4 Software for Optimal Control Calculations.- Automated Approach for Optimizing Dynamic Systems.- ANDECS: A Computation Environment for Control Applications of Optimization.- Application of Automatic Differentiation to Optimal Control Problems.- OCCAL: A mixed symbolic-numeric Optimal Control CALculator.- 5 Applications of Optimal Control.- A Robotic Satellite with Simplified Design.- Nonlinear Control under Constraints of a Biological System.- An Object-Oriented Approach to Optimally Describe and Specify a SCADA System Applied to a Power Network.- Near-Optimal Flight Trajectories Generated by Neural Networks.- Performance of a Feedback Method with Respect to Changes in the Air-Density during the Ascent of a Two-Stage-To-Orbit Vehicle.- Linear Optimal Control for Reentry Flight.- Steady-State Modelling of Turbine Engine with Controllers.- Shortest Paths for Satellite Mounted Robot Manipulators.- Optimal Control of the Industrial Robot Manutec r3.

The optimization problem consists in finding an element that minimizes or maximizes the goal (or cost) functional on the set of admissible controls. The paper is devoted to the optimization problem for a pseudoparabolic equation with control in coefficients of the variational equality as well as on the right-hand side. We consider optimal control problem (parabolic initial boundary value problem) of a viscoelastic plate. The bending of a plate is described by means of the Kirchhoff model. We assume that a nonhomogeneous and anisotropic viscoelastic plate occupying a domain Ω × (—H, H) of the space ℝ3 is loaded be a transversal distributed force perpendicular to the middle plane of the plate. The viscoelastic reinforced plate with welded bars rests on a unilateral elastic foundation. The role of the control variables is played by the thickness of the viscoelastic plate and the stiffness characteristics of the elastic Winkler medium, respectively. We consider the desired moments field (the bending moments and torque) in time T as the cost functional. The control variables have to belong to a set of Lipschitz-continuous functions and to a set of continuously differentiable functions, respectively. The state problem is modelled by a pseudoparabolic variational equality, where the control variables influence both the coefficients of the linear strictly monotone operator and the Winkler functional. We derive there some apriori estimates of the state function which are useful for the problem of the existence of the optimal thickness function and the Winkler modulus, respectively, and for unicity of the optimal controls. On the basis of a general existence theorem for a class of pseudoparabolic optimization problems with the state variational equation, we prove the existence of at least one solution of the optimal control problem.

In this paper we investigate the use of optimal control techniques to improve Functional Electrical Stimulation (FES) for drop foot correction on hemiplegic patients. A model of the foot and the tibialis anterior muscle, the contraction of which is controlled by electrical stimulation has been established and is used in the optimal control problem. The novelty in this work is the use of the ankle accelerations and shank orientations (so-called external states) in the model, which have been measured on hemiplegic patients in a previous experiment using Inertial Measurement Units (IMUs). The optimal control problem minimizes the square of muscle excitations which serves the overall goal of reducing energy consumption in the muscle. In a first step, an offline optimal control problem is solved for test purposes and shows the efficiency of the FES optimal control for drop foot correction. In a second step, a Nonlinear Model Predictive Control (NMPC) problem - or online optimal control problem, is solved in a simulated environment. While the ulitmate goal is to use NMPC on the real system, i.e. directly on the patient, this test in simulation was meant to show the feasibility of NMPC for online drop foot correction. In the optimization problem, a set of fixed constraints of foot orientation was applied. Then, an original adaptive constraint taking into account the current ankle height, was introduced and tested. Comparisons between results under fixed and adaptive constraints highlight the advantage of the adaptive constraints in terms of energy consumption, where its quadratic sum of controls, obtained by NMPC, was three times lower than with the fixed constraint. This feasibility study was a first step in application of NMPC on real hemiplegic patients for online FES-based drop foot correction. The adaptive constraints method presents a new and efficient approach in terms of muscular energy consumption minimization.

Solutions to optimal control problems obtained via direct methods are usually of low resolution. As the desired resolution becomes higher, the number of parameters in the resulting parameter optimization problem increases nonlinearly. A concatenated approach to trajectory optimization previously introduced by the authors to obtain high resolution optimal solutions with low storage requirements is applicable only to a specific class of problems, such as minimum time and minimum energy optimal control problems. The hodograph ballooning approach introduced in this paper generalizes the concatenated approach to the most general optimal control problem. Introduction The development of powerful nonlinear programming software [1, 2] has made direct approaches to trajectory optimization the method of choice for most practical applications [3-5]. The discretization of an optimal control problem to a finite dimensional parameter optimization problem avoids many of the troublesome pathologies that are typical for the optimization over infinite dimensional function spaces [6-8]. Furthermore, direct approaches usually do not. require guessing the switching structure, and the dynamical system is devoid of the nonintuitive costate variables. However, to achieve good resolution it is usually necessary to refine some type of discretization mesh, and, ultimately, to use a large number of design parameters. For typical gradient search methods, this increase in the dimension of the optimization problem has nearly always a negative effect on the convergence rate and the robustness. Additionally, CPU time and RAM requirements for each iteration increase with the second power of the number of parameters (third power for non-sparse solvers) so that direct optimization approaches can become quite expensive. In [9], a method was introduced that achieves excellent resolution without solving high-dimensional nonlinear programming problems. This was achieved by lo'Senior Engineer, Member AIAA. t Supervising Engineer, Member AIAA. 117 Research Drive, Hampton, VA 23666. Copyright ©1996 by the American Institute of Aeronautics and Astronautics, Inc. All rights reserved cally optimizing the trajectory on an iterative sequence of short, partly overlapping subarcs. However, this approach is not applicable to the most general problem formulation. Loosely sneaking, it was required in [9] that the cost state does not appear explicitly in the right-hand side of the equations of motion. The present paper introduces a method through which the approach introduced in [9] becomes applicable to the most general problem formulation. Application of this method, however, requires a priori knowledge of the optimal cost. In practice it is observed that the optimal cost can be obtained with very high precision with reasonably low order discretizations. Once a good guess for the optimal cost is obtained presented in this paper can be applied to refine the trajectory, or, if the optimal cost value is not known a priori with sufficient precision, it can be applied iteratively with the prescribed cost value adjusted in an outer loop. Problem Formulation Let us consider the following simple optimal control problem stated in Mayer form: ^ 4 ( x ( t f ) , t f ) (1 )

This paper builds up two equivalence theorems for different kinds of optimal control problems of internally controlled Schrodinger equations. The first one is an equivalence of the minimal norm and the minimal time control problems where the target sets are the origin of the state space. (The minimal time control problems are also called the first type of optimal time control problems.) The second one is an equivalence of three optimal control problems: optimal target control problems, optimal norm control problems, and the second type of optimal time control problems.

Prioritization of renewable energy sources for Turkey by using a hybrid MCDM methodology

This article addresses the optimal tracking control problem with prescribed performance for uncertain nonlinear systems subject to input constraint and unknown disturbances. First, a fixed‐time monotonic convergence function is introduced to restrain tracking error, and a nonlinear mapping technique is employed to transform the constrained error into an unconstrained variable, then the fixed‐time output tracking issue is boiled down to the boundedness problem of the transformed variable. With the aid of a nonquadratic cost function, the input constraint is encoded into the optimization problem. To solve the unknown disturbances, an auxiliary system and an auxiliary disturbance policy are constructed, and the optimal control problem is formulated as a two‐player zero‐sum game. Moreover, a Hamilton–Jacobi–Isaacs (HJI) equation associated with this nonquadratic zero‐sum game is established to give the optimal control and the worst‐case disturbance policy solution. Subsequently, to avoid using knowledge of the system dynamics, three neural network approximators, namely, actor, critic, and disturbance, which are tuned online and simultaneously for approximating the solution of HJI, are constructed based on the integral reinforcement learning algorithm. Theoretical analysis shows that the reconstructed error system states and the weight estimation errors are semi‐globally uniformly ultimately bounded. Finally, the simulation study further tests the availability of the proposed control strategy.

Existing methods for nonlinear robust control often use scenario‐based approaches to formulate the control problem as large nonlinear optimization problems. The optimization problems are challenging to solve due to their size, especially if the control problems include time‐varying uncertainty. This paper draws from local reduction methods used in semi‐infinite optimization to solve robust optimal control problems with parametric and time‐varying uncertainty. By iteratively adding interim worst‐case scenarios to the problem, methods based on local reduction provide a way to manage the total number of scenarios. We show that the local reduction method for optimal control problems consists of solving a series of simplified optimal control problems to find worst‐case constraint violations. In particular, we present examples where local reduction methods find worst‐case scenarios that are not on the boundary of the uncertainty set. We also provide bounds on the error if local solvers are used. The proposed approach is illustrated with two case studies with parametric and additive time‐varying uncertainty. In the first case study, the number of scenarios obtained from local reduction is 101, smaller than in the case when all extreme scenarios are considered. In the second case study, the number of scenarios obtained from the local reduction is two compared to 512 extreme scenarios. Our approach was able to satisfy the constraints both for parametric uncertainty and time‐varying disturbances, whereas approaches from literature either violated the constraints or became computationally expensive.

Novel cyber-physical architecture for optimal operation of renewable-based smart city considering false data injection attacks: Digital twin technologies for smart city infrastructure management

The paper is devoted to solving the balancing problem in local power systems with renewable energy sources. For a power system optimization problem, whose operation depends on random weather factors, a convex parameter optimization or optimal control problem was solved using controlled generation, for each individual realization of a random process as a deterministic function, and then statistical processing of results over a set of random realizations was performed and distribution density functions of the desired target function were constructed, followed by estimation of expected values and their confidence intervals. The process describing current deviations of generated power from mean value is modelled as discrete stray model and has properties of Ornstein-Uhlenbeck process, which allowed varying the duration of unit interval, in particular to select data bases of operating objects with inherent temporal discreteness of their monitoring systems. Random components are investigated and modelled, while the average values are considered to be deterministic and are provided within a predictable schedule using also traditional energy sources (centralised power grid). A mathematical model of the combined operation of renewable energy sources in a system with variable load, electric storage device and auxiliary regulating generator is implemented as a scheme of sequential generation and consumption models and random processes describing the current state of the power system. The operation of the electricity accumulators is dependent on the processes mentioned, but in the full balance, it appears together with generation or load losses, which are cumulative sums of unbalanced power and may have a different distribution from the normal one. However, these processes are internal, relating to the redistribution of energy within a generation system whose capacity is generally described satisfactorily, given the relevant criteria, by a normal law. Under this condition, it is possible to estimate the probability of different circumstances - over- or under-generation, that is, to give a numerical estimate of the reliability of energy supply.