• Home
  • Search
  • Measuring scanning acoustic microscope with a harmonic sounding signal
  • https://doi.org/10.1134/1.1310375Copy DOI Icon

Measuring scanning acoustic microscope with a harmonic sounding signal

Show More
  • Abstract
  • Literature Map
  • References
  • Similar Papers
Abstract

A concept of a scanning acoustic microscope with a harmonic sounding signal for measuring the parameters of local homogeneous regions of flat samples is proposed. The distinctive feature of the device is the utilization of the Doppler effect that occurs in the sounding wave reflected from the sample surface when the sample is uniformly moved relative to the focusing ultrasonic transducer of the microscope. It is theoretically demonstrated that the spectrum of the received signal is determined by the product of the reflection coefficient and the transfer function of the transducer. The errors of the measurement technique are considered, and the sources of signal distortions are analyzed. High sensitivity of the measurement results to the errors of the scanning system is demonstrated. The developed measuring microscope is described, in which an acoustic interferometer is used to provide the necessary precision of the scanning coordinate measurement. The microscope transfer function is measured for the frequency of the sounding signal 65 MHz, and the values of density and bulk wave velocities are determined for a homogeneous sample by the measured phase of the reflection coefficient using the technique of nonlinear estimation of parameters. With fused quartz used as an example, it is shown that the measurement error is 7.2% for density and 2.3 and 0.7% for the velocities of longitudinal and transverse waves, respectively. In addition, the velocity of a leaky surface wave (SAW) is determined by two methods. One method is based on measuring the position of the inflexion point for the experimental phase of the reflection coefficient, and the other is based on calculating the SAW velocity corresponding to the measured values of density and bulk wave velocities. The errors of these methods are found to be equal to 0.42 and 0.17%, respectively.

Similar Papers
  • Research Article
  • Citations6

Dispersive characteristic measurement of multi-layer cement mortar slabs using SASW method and neural network

  • Oct 01, 2003
  • Computers and Structures
  • Young-Sang Cho
  • Research Article
  • Citations1

Geoacoustic Digital Model for the Sea of Japan Shelf (Peter the Great Bay)

  • Oct 28, 2024
  • Geosciences
  • Aleksandr Samchenko +4
  • Research Article
  • Citations16

Investigating Fire Collapse Early Warning Systems for Portal Frames

  • Jan 20, 2025
  • Buildings
  • Ming Xie +6
  • Research Article
  • Citations25

Quantitative Assessment of Thyroid Glands in Healthy Children With Shear Wave Elastography.

  • Sep 01, 2019
  • Ultrasound Quarterly
  • Emine Uysal +1
  • Single Book
  • Citations152

Shear Waves in Marine Sediments

  • Jan 01, 1991
  • Jens M Hovem +2
  • Research Article
  • Citations16

Technique for Measurements of Elastic Wave Velocities and Thickness of Solid Plate from Access on Only One Side

  • Jul 01, 2005
  • Japanese Journal of Applied Physics
  • Young H Kim +2
  • Research Article
  • Citations30

Texture monitoring in aluminium alloys: A comparison of ultrasonic and neutron diffraction measurement

  • Jul 01, 1988
  • Ultrasonics
  • A.V Clark +7
  • Research Article
  • Citations4

Propagating Properties of Surface Wave in Sol-Gel Transition of Tungstic Acid

  • May 01, 1994
  • Japanese Journal of Applied Physics
  • Kazuhiro Motonaga +1
  • Research Article
  • Citations5

Inversion for acoustic parameters of plastic polymer target in water

  • Jan 01, 2019
  • Acta Physica Sinica
  • Yan-Ling Zhou +2
  • Research Article
  • Citations3

Material microstructure effects on ultrasonic waves under simple shear and pure shear

  • Feb 20, 2007
  • NDT and E International
  • S.H Tang +2
  • Research Article
  • Citations3

Pure Aluminum Single Crystal Study on Point Defect Dependence of Ultrasonic Longitudinal Wave Velocity

  • Jan 01, 2005
  • TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series A
  • Michiaki Kobayashi +4
  • Research Article
  • Citations5

Statistical error analysis of time and polarization resolved ultrasonic measurements

  • Jul 01, 1998
  • IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control
  • D Xiang +2
  • Research Article

НЕРАЗРУШАЮЩИЙ КОНТРОЛЬ СОСТОЯНИЯ МАТЕРИАЛА ПАР ТРЕНИЯ НАСОСОВ УСТАНОВОК ВВЭР

  • Jan 01, 2022
  • Problems of Strength and Plasticity
  • V.I Erofeev +5
  • Research Article
  • Citations3

Analysis of the hydrodynamics of a periodically operated trickle-bed reactor—A shock wave velocity

  • Mar 04, 2014
  • Chemical Engineering Research and Design
  • Anna Gancarczyk +3
  • Research Article
  • Citations5

Structure of Surface Wave on Coarse-Grained Nickel Observed by Acoustic Spectro-Microscopy

  • Jan 01, 1996
  • Materials Transactions, JIM
  • Yang Xu +2
Cactus Communications logo

Copyright 2026 Cactus Communications. All rights reserved.