Media Control at the Network Edge

Various real-time, latency-sensitive, and high-speed mobile applications are evolving as 5G applications. These applications are realized using Multi-access Edge Computing (MEC) and Network Function Virtualization (NFV) technologies in the 5G system. MEC platform, MEC service, and MEC application are the main components of an MEC Framework. NFV Orchestrator, Virtualized Infrastructure Manager (VIM), and virtualization technologies such as Virtual Machines (VM) and Containers are the main pillars of the NFV technology. In this paper, we study the impact of the virtualization technologies in the deployment of the MEC framework and its components while. We also study the impact of virtualization technologies on NFV and MEC KPIs such as onboarding time, instantiation time, MEC service and application response times. The experiments and its analysis show that containers perform better than VM to instantiate/terminate MEC components in the NFV framework. The observed MEC service KPIs show that the edge application’s performance will be improved to meet the QoE of the applications irrespective of the virtualization technology used. These results can be used as a reference while deploying the MEC components based on their granular functionalities.

With the advancements in 5G technology, Multi-access Edge Computing (MEC) has always been at the forefront due to its ability to provide additional computational power with reduced network latency compared to cloud computing. Most applications from the Vehicle to Everything (V2X) and Intelligent Transport Systems (ITS) domains are stringent in latency requirements, for which MEC is an excellent enabler. As per MEC architecture, MEC applications can leverage the benefits of storing essential information as a part of MEC services to further reduce the latency. In this work, we enhance an in-house 5G emulation framework by integrating it with ETSI MEC Location Service API for supporting various ITS use cases. We demonstrate the use case of providing proximity alerts to the drivers using SUMO platform and a mobile application.

Multi-access Edge Computing (MEC) is gaining momentum as it is considered as one of the enablers of 5G ultra-Reliable Low-Latency Communications (uRLLC) services. MEC deploys computation resources close to the end user, enabling to reduce drastically the end-to-end latency. ETSI has recently leveraged the MEC architecture to run all MEC entities, including MEC applications, as Virtual Network Functions (VNF) in a Network Functions Virtualization (NFV) environment. This evolution allows taking advantage of the mature architecture and the enabling tools of NFV, including the potential to apply a variety of service-tailored function placement algorithms. However, the latter need to be carefully designed in case of MEC applications such as uRLLC, where service access latency is critical. In this paper, we propose a novel placement scheme applicable to a MEC in NFV environment. In particular, we propose a formulation of the problem of VNF placement tailored to uRLLC as an optimization problem of two conflicting objectives, namely minimizing access latency and maximizing service availability. To deal with the complexity of the problem, we propose a Genetic Algorithm to solve it, which we compare with a CPLEX implementation of our model. Our numerical results show that our heuristic algorithm runs efficiently and produces solutions that approximate well the optimal, reducing latency and providing a highly-available service.

Fifth generation (5G) mobile system is designed to support mission critical communications which requires significantly reduced delays and high reliability. Multi-access Edge Computing (MEC) technology, as a key component of 5G, may satisfy the strong requirements for network resilience and latency. The most benefit from the advantages of MEC may be achieved in case of MEC deployment as close as to the network edge. In this paper, we consider two MEC deployment scenarios for mission critical communications, and estimate the latency introduced by the control plane in provisioning of real time radio network information.

In industrial production, mass data transmission and processing are required with an increase in production data, which causes large-scale and complicated wiring in the manufacturing industry. However, it is difficult to achieve improved performance through traditional wireless communication technologies. 5G, a leading communication technology, with its Ultra-Reliable Low Latency Communication (uRLLC) combined with Multi-access Edge Computing (MEC), provides huge potential for the service with requirements for higher bandwidth, lower latency, and more computation. The Local Area Network type (LAN-type) Service supported by the 5G system reduces the net distance, which further decreases latency and provides data security. Based on this, in this paper, a 5G MEC gateway system is proposed to realize local wireless communication in a factory. The gateway system includes an intranet Address Resolution Mechanism, which is designed to resolve User Equipment IP addresses, a MEC server, which acts as a switch for packets broadcasting, and network tunnels, which are established between gateways to transmit data in the 5G LAN. In addition, the implemented testbed includes Raspberry Pi, which acts as the gateway, and the OpenVPN server, which runs in the MEC. Finally, two cases are shown to transfer Profinet and OPC UA data with this system.

ABSTRACT6G technology is expected to transform communications by allowing the Internet of Everything, representing a huge advance in 2030. While B5G has not yet been established, various nations are actively working on 5G, but certain research groups are presently devoting their attention to the creation of 6G technologies. The upcoming 6G networks promise higher quality of service (QoS) features, including virtual reality and holographic communications. Multi‐Access Edge Computing (MEC) and, in particular, the offloading idea are key components of 6G innovation that enable resource‐intensive application design. If the wireless link used for computational offloading is inefficient, MEC's true potential can be impeded. Intelligent beamforming and MEC have garnered attention recently. Systematically optimizing the wireless communication environment, these developments improve connectivity between user equipment (UE) and base station (BS). By increasing the electrical charge of the reflectable signal, intelligent beamforming increases the range and efficacy of Back Communication. Particularly, this study assesses how well the MEC structure performs in urban microcellular settings when intelligent beamforming is used in communications. It has been demonstrated that the use of Intelligent Reflecting Surfaces (IRS) greatly reduces spectrum and energy usage. This study's results are implemented in Python software. Our suggested strategy shows better latency compared to other optimization methods and shorter task completion times than traditional methods. When compared to conventional techniques, the suggested MEC‐enabled network showcasing lower latency (4.9 ms) and efficient network congestion management and task completion time (30 ms) demonstrates a significant performance. These results highlight how intelligent beamforming and MEC have a lot of potential to shape the architecture of 6G networks in the future.

In recent years, AIoT (Artificial Intelligence of Things) applications have received lots of attention since it exploits widely deployed IoT devices to collect data and perform an action while leveraging AI to obtain knowledge and insights. When deploying AIoT in 5G networks, Multi-access Edge Computing (MEC) is appropriate for enabling local management of IoT devices and computation of machine learning (ML) algorithms. Facing the multitude of threats in the ML data layer, IoT service layer, and 5G communications layer, MEC should enable corresponding detection and mitigation schemes to protect AIoT applications. In this article, we examine the existing security solutions located in each layer and discuss the interrelated challenges. For example, a network-traffic-based IDS solution in MEC might capture IoT malware but fail to identify a growing file-less attack. We suggest that firmware emulation in IoT endpoint should be included to provide system-level behaviors to network-based detectors in MEC so that file-less attacks can be distinguished. The potential of a backdoor attack aiming to poison data or corrupt ML models cannot be ignored in AIoT applications, and a corresponding detector should be implemented in MEC. Due to the rise of low-cost Software-Defined Radio (SDR), malicious attacks using rogue base stations (BSs) have become more popular. It implies that security protection at MEC in the communications layer is necessary. This article, therefore, proposes a novel platform, M3Inspector, where inspectors located in mobiles and AIoT machines collect information from surrounding BSs and provide them to MEC. MEC determines the rogue BS and makes a notification to users subscribing to the local service. A realistic 5G experimental platform with rogue BSs is developed. The results demonstrate that attack detection and mitigation can be implemented in the MEC paradigm to significantly improve the security protection of AIoT from the perspectives of rogue BS attacks and file-less attacks.

Optimizing the energy consumption of an MEC (Multi-Access Edge Computing) system is a crucial challenge for operation cost reduction and environmental conservation. In this paper, we address an MECS (MEC Server) sleep control problem that aims to reduce the energy consumption of the system while providing users with a reasonable service delay by adjusting the number of active MECSs according to the load imposed on the system. To tackle the problem, we identify two crucial issues that influence the design of an effective sleep control technique and propose methods to address each of these issues. The first issue is accurately predicting the system load. Changes in system load are spatio-temporally correlated among MECSs. By leveraging such correlation information with STGCN (Spatio-Temporal Graph Convolutional Network), we enhance the prediction accuracy of task arrival rates for each MECS. The second issue is rapidly selecting MECSs to sleep when the load distribution over an MEC system is given. The problem of choosing sleep MECS is a combinatorial optimization problem with high time complexity. To address the issue, we employ a genetic algorithm and quickly determine the optimal sleep MECS with the predicted load information for each MECS. Through simulation studies, we verify that compared to the LSTM (Long Short-Term Memory)-based method, our method increases the energy efficiency of an MEC system while providing a compatible service delay.

5G ecosystems will benefit significantly from Multi-access Edge Computing (MEC) and Network Function Virtualization (NFV). While NFV allows for dynamical deployment of virtualized network functions, MEC allows applications to be deployed close to mobile users, thus reducing latency. When used together, NFV and MEC bring flexibility and enhanced performance to meet the user’s demand. However, to increase service availability and maximize the convenience of MEC users, an MEC framework has to interface with multiple NFV orchestrators to utilize running network functions in an efficient manner. We introduce in this demonstration APMEC, a framework addressing the above two challenges. Via a combination of an interactive GUI, KPI views and a live-demo setup, we will showcase the advanced features of the framework.

A novel framework for optimizing the edge network node for wearable devices

Multi-access Edge Computing (MEC) can provide the intelligent platform or environment for services with the requirements of lower latency, higher bandwidth, and higher computation complexity, thereby attracting more attention in the future network. Intuitively, MEC can be applied to 4G and 5G mobile networks respectively, however the corresponding MEC architectures will be entirely different because of the difference between 4G and 5G network architectures. Therefore, this paper firstly presents the 4G MEC architecture and deeply discusses the existing problems in field trials and future deployment, e.g. charging, lawful interception, etc. Considering the above problems, the 5G MEC integrated architecture is proposed in this paper, which takes the network and service functions into account simultaneously. Meanwhile, the network function, especially for the traffic offloading mechanism, is emphatically analyzed and discussed. In addition, some suggestions are also presented for promotion of 5G MEC.

Multi-Access Edge Computing (MEC) promises to provide sufficient computing capacity close to users and realize smart management at the edge of mobile network. To achieve the aforementioned objectives, it is indispensable to implement real-time monitoring of the whole MEC network. However, the geo-distributed deployment of MEC infrastructure dramatically increases the communication latency of gathering the state information (e.g. current status and resource utilization) from servers at the edge. This paper addresses latency-optimal placement and autoscaling of monitoring functions in MEC. First, we formally formulate latency-optimal placement of monitoring functions as an integer linear programming problem and proposed a genetic algorithm-based meta-heuristic to obtain the optimal solution with fast convergence. Moreover, to serve the time-varying demand on resource capacity from diversified mobile services, an online VNF scaling scheme is designed for realizing on-demand resource allocation. The effectiveness of our heuristic algorithm is verified through both numerical simulation and experiments in real cloud environment. Experimental results demonstrate performance superiority of the proposed approach over the state-of-art researches, in terms of algorithm CPU time, total network latency and long-term scaling cost.

Multi-access edge computing (MEC) promises to deliver localized computing power and storage. Coupled with low-latency 5G radio access, this enables the creation of high added-value services for mobile users, such as in-vehicle infotainment or remote driving. The performance of these services as well as their scalability will however depend on how MEC will be deployed in 5G systems. This paper evaluates different MEC deployment options, coherent with the respective 5G migration phases, using an accurate and comprehensive end-to-end (E2E) system simulation model (exploiting Simu5G for radio access and Intel CoFluent for core network and MEC), taking into account user-related metrics, such as response time or MEC latency. Our results show that 4G radio access is going to be a bottleneck, preventing MEC services from scaling up. On the other hand, the introduction of 5G will allow a considerable higher penetration of MEC services.

Multi access edge computing (MEC) is an extension of 5G network on the edge side. Its network characteristics of high bandwidth and low delay provide necessary guarantee for the extreme user experience of VR (virtual reality). At the same time, the distributed architecture of 5g MEC network and the fast data exchange capability between nodes provide the hardware foundation for VR application marginalization deployment and equipment mobility access. Considering the cost and experience of VR, this paper first analyzes the advantages and disadvantages of VR based on traditional hardware architecture, and then describes the benefits of MEC on VR cost and experience. Finally, taking VR live video scene as an example, the key technologies of VR based on MEC are described.

Accelerating the development of the 5G network and Internet of Things (IoT) application, multi-access edge computing (MEC) in a small-cell network (SCN) is designed to provide computation-intensive and latency-sensitive applications through task offloading. However, without collaboration, the resources of a single MEC server are wasted or sometimes overloaded for different service requests and applications; therefore, it increases the user’s task failure rate and task duration. Meanwhile, the distinct MEC server has faced some challenges to determine where the offloaded task will be processed because the system can hardly predict the demand of end-users in advance. As a result, the quality-of-service (QoS) will be deteriorated because of service interruptions, long execution, and waiting time. To improve the QoS, we propose a novel Fuzzy logic-based collaborative task offloading (FCTO) scheme in MEC-enabled densely deployed small-cell networks. In FCTO, the delay sensitivity of the QoS is considered as the Fuzzy input parameter to make a decision where to offload the task is beneficial. The key is to share computation resources with each other and among MEC servers by using fuzzy-logic approach to select a target MEC server for task offloading. As a result, it can accommodate more computation workload in the MEC system and reduce reliance on the remote cloud. The simulation result of the proposed scheme show that our proposed system provides the best performances in all scenarios with different criteria compared with other baseline algorithms in terms of the average task failure rate, task completion time, and server utilization.