Medical Image Classification Using a Light-Weighted Hybrid Neural Network Based on PCANet and DenseNet

Due to the complexity of medical images, traditional medical image classification methods have been unable to meet the actual application needs. In recent years, the rapid development of deep learning theory has provided a technical approach for solving medical image classification. However, deep learning has the following problems in the application of medical image classification. First, it is impossible to construct a deep learning model with excellent performance according to the characteristics of medical images. Second, the current deep learning network structure and training strategies are less adaptable to medical images. Therefore, this paper first introduces the visual attention mechanism into the deep learning model so that the information can be extracted more effectively according to the problem of medical images, and the reasoning is realized at a finer granularity. It can increase the interpretability of the model. Additionally, to solve the problem of matching the deep learning network structure and training strategy to medical images, this paper will construct a novel multiscale convolutional neural network model that can automatically extract high-level discriminative appearance features from the original image, and the loss function uses the Mahalanobis distance optimization model to obtain a better training strategy, which can improve the robust performance of the network model. The medical image classification task is completed by the above method. Based on the above ideas, this paper proposes a medical classification algorithm based on a visual attention mechanism-multiscale convolutional neural network. The lung nodules and breast cancer images were classified by the method in this paper. The experimental results show that the accuracy of medical image classification in this paper is not only higher than that of traditional machine learning methods but also improved compared with other deep learning methods, and the method has good stability and robustness.

Automatic targets recognition (ATR) for synthetic aperture radar (SAR) image is very important. ATR can be used in traffic management, national frontier safety, and so on. Traditional algorithms for SAR ATR is composed of extraction features and training classifier. The features are essential for the classification accuracy. However, choosing good features by hand is a hard task. The deep convolutional neural networks (CNNs) which can learn features automatically have got a great performance in natural images. However, the CNNs have many parameters and need a lot of data to train such networks. The remote-sensing data of SAR is limited. Then, the authors need a simple network which needs not much data and easy to train. The principal component analysis network (PCANet) is a shallow network that performs well in the recognition task and needs no hand features choosing. Though this network has produced a wide application in the natural images, it is rarely used in the SAR images. The experimental result of the moving and stationary target acquisition and recognition (MSTAR) dataset shows that the PCANet can achieve over 99% accuracy on ten-class targets. This result is better than traditional algorithms and is very close to the results of deep-learning methods.

Due to the complexity of medical images, traditional medical image classification methods have been unable to meet actual application needs. In recent years, the rapid development of deep learning theory has provided a technical approach for solving medical image classification tasks. However, deep learning has the following problems in medical image classification. First, it is impossible to construct a deep learning model hierarchy for medical image properties; second, the network initialization weights of deep learning models are not well optimized. Therefore, this paper starts from the perspective of network optimization and improves the nonlinear modeling ability of the network through optimization methods. A new network weight initialization method is proposed, which alleviates the problem that existing deep learning model initialization is limited by the type of the nonlinear unit adopted and increases the potential of the neural network to handle different visual tasks. Moreover, through an in‐depth study of the multicolumn convolutional neural network framework, this paper finds that the number of features and the convolution kernel size at different levels of the convolutional neural network are different. In contrast, the proposed method can construct different convolutional neural network models that adapt better to the characteristics of the medical images of interest and thus can better train the resulting heterogeneous multicolumn convolutional neural networks. Finally, using the adaptive sliding window fusion mechanism proposed in this paper, both methods jointly complete the classification task of medical images. Based on the above ideas, this paper proposes a medical classification algorithm based on a weight initialization/sliding window fusion for multilevel convolutional neural networks. The methods proposed in this study were applied to breast mass, brain tumor tissue, and medical image database classification experiments. The results show that the proposed method not only achieves a higher average accuracy than that of traditional machine learning and other deep learning methods but also is more stable and more robust.

Deep learning has been successfully applied in classification of white blood cells (WBCs), however, accuracy and processing time are found to be less than optimal hindering it from getting its full potential. This is due to imbalanced dataset, intra-class compactness, inter-class separability and overfitting problems. The main research idea is to enhance the classification and prediction accuracy of blood images while lowering processing time through the use of deep convolutional neural network (DCNN) architecture by using the modified loss function. The proposed system consists of a deep neural convolution network (DCNN) that will improve the classification accuracy by using modified loss function along with regularization. Firstly, images are pre-processed and fed through DCNN that contains different layers with different activation function for the feature extraction and classification. Along with modified loss function with regularization, weight function aids in the classification of WBCs by considering weights of samples belonging to each class for compensating the error arising due to imbalanced dataset. The processing time will be counted by each image to check the time enhancement. The classification accuracy and processing time are achieved using the dataset-master. Our proposed solution obtains better classification performance in the given dataset comparing with other previous methods. The proposed system enhanced the classification accuracy of 98.92% from 96.1% and a decrease in processing time from 0.354 to 0.216 s. Less time will be required by our proposed solution for achieving the model convergence with 9 epochs against the current convergence time of 13.5 epochs on average, epoch is the formation white blood cells (WBCs) and the development of granular cells. The proposed solution modified loss function to solve the adverse effect caused due to imbalance dataset by considering weight and use regularization technique for overfitting problem.

The manual feature extraction of the traditional method for vehicle license plates has no good robustness to change in diversity. And the high feature dimension that is extracted with Principal Component Analysis Network (PCANet) leads to low classification efficiency. For solving these problems, a method of vehicle license plate recognition based on PCANet and compressive sensing is proposed. First, PCANet is used to extract the feature from the images of characters. And then, the sparse measurement matrix which is a very sparse matrix and consistent with Restricted Isometry Property (RIP) condition of the compressed sensing is used to reduce the dimensions of extracted features. Finally, the Support Vector Machine (SVM) is used to train and recognize the features whose dimension has been reduced. Experimental results demonstrate that the proposed method has better performance than Convolutional Neural Network (CNN) in the recognition and time. Compared with no compression sensing, the proposed method has lower feature dimension for the increase of efficiency.

Robust two-dimensional PCANet with F-norm distance metric

Introduction: This paper presents a novel approach for classifying different types of steel rods using a combination of pre-trained convolutional neural networks (CNNs) and fuzzy logic systems. We utilize VGG16, ResNet50, and InceptionV3 models to extract features from grayscale images of steel rods, which are then classified using Support Vector Machines (SVM). Furthermore, we incorporate a fuzzy logic system to improve the final classification accuracy by combining the individual accuracies of each CNN model. Experimental results demonstrate the effectiveness of our approach in achieving high classification accuracy compared to traditional methods. Objectives: This research presents a novel multi-model approach for steel rod classification utilizing three distinct fuzzy logic systems: Fuzzy Recurrent Neural Network (RNN), Fuzzy Convolutional Neural Network (CNN), and Fuzzy Neural Network. The proposed system addresses the critical challenge of accurate defect detection and classification in steel manufacturing processes. By combining these complementary approaches, we achieve enhanced feature extraction capabilities and improved classification accuracy. Experimental results demonstrate that our multi-model system achieves a classification accuracy of 97.8%, surpassing single-model approaches by an average of 8.2%. The system successfully identifies surface defects, structural anomalies, and dimensional variations with high precision, making it suitable for real-time industrial applications. Methods: This paper introduces a novel approach for the feature extraction and classification of steel rods by integrating multiple models and utilizing fuzzy logic systems. The methodology leverages pre-trained convolutional neural networks (CNNs) for extracting comprehensive feature representations from steel rod images. These extracted features are then combined and integrated using fuzzy logic to enhance classification accuracy and reliability. By addressing the limitations of traditional manual inspection methods and single-model approaches, this integrated multi-model system offers a robust solution for real-time industrial implementation. The proposed system aims to improve the efficiency and effectiveness of quality control processes in steel rod manufacturing, ensuring consistent and accurate classification even under varying conditions and complexities. This innovative approach paves the way for more advanced and adaptable automated inspection systems in the industry. Results: The paper aims to develop an integrated multi-model system that combines three distinct fuzzy logic approaches to enhance feature extraction capabilities through complementary methodologies. By improving the classification accuracy and reliability, the system addresses the limitations of existing methods. The goal is to create a robust and adaptable system that is suitable for real-time industrial implementation for steel rod analysis and classification. This comprehensive approach leverages the strengths of multiple models and fuzzy logic techniques, ensuring accurate and efficient classification processes, even under complex and varying conditions. The proposed multi model system is designed to meet the stringent quality control requirements of industrial applications, ultimately improving productivity and product quality through reliable automated inspection and classification for steel rod with accuracy of 97.80%, precision of 97.30% and recall 97.50%. Conclusions: This paper presents a novel approach for the classification of steel rods using a combination of pre-trained CNN models and fuzzy logic systems. The experimental results demonstrate the effectiveness of our method in achieving high classification accuracy. This research demonstrates the effectiveness of a multi-model fuzzy logic approach for steel rod classification. The system achieves significant improvements over single-model approaches while maintaining real-time processing capabilities. Our approach provides a foundation for further research and development in automated industrial image classification.

Currently, the used of deep learning method has attracted widespread attention in machine learning, especially in Biometric. Many deep learning methods have been proposed like convolutional neural network (CNN), AlexNet and principal component analysis network (PCANet). Among the methods employed, PCANet is believed to be the most effective method because of its promising performance in biometric. However, the current filter generation approach in PCANet does not consider the characteristics of the image, such as vein lines for finger vein recognition. To address this limitation, we proposed a new filter generation method that can consider the essential features of the image, such as the use of vein lines for finger vein recognition. The filter of the proposed method was generated by finding the correlation between two view images, which was original grayscale image and vein line image using canonical correlation analysis (CCA) method. Then, we evaluated this proposed method with the three public finger vein image database, FV-USM, SDUMLA-HMT and THU-FVT2. The results showed that the proposed method produced higher accuracy compared to other state-of-the-art features of finger vein recognition biometric method.

Human activity recognition is an important and challenging topic for computer vision research community. Action representation using deep learning models are currently the dominant technique compared with other methods. However, supervised convolutional neural networks require large computational and memory resources to optimize their parameters. Recently, a simple unsupervised deep learning architecture Principal Component Analysis Network (PCANet) has emerged as an alternative of Convolutional Neural Networks (CNNs) and has significant accomplishments in various vision applications. Meanwhile, encoding and representation techniques using Bag of Words (BoW) and Vector of Locally Aggregated Descriptors (VLAD) have demonstrated great success for several visual tasks specifically in activity recognition. This work presents a novel human activity recognition technique by combining global and local features of PCANet with BoW and VLAD encoding schemes. Both global and local features are learned by PCANet utilizing selected frames from each action video. After that the dimensionality of these features is decreased via Whitening PCA (WPCA). Then encoding schemes are applied on both features to represent the final descriptors for each action. Ultimately, Support Vector Machines classifier (SVM) is trained for recognition process. Several experiments are conducted on UCF sports dataset to evaluate our method. All experimental results utilizing leave-one-out-cross validation (LOOCV) strategy are satisfactorv and comparable.

White Blood Cell (WBC) classification plays a crucial role in diagnosing various hematological disorders and infections. Automated WBC classification using deep learning techniques has gained significant attention due to its efficiency and accuracy. This conference paper presents a study on the application of the VGG-19 deep learning model for WBC classification. The research highlights the methodology, experimental results, advantages, challenges, and future research directions in utilizing VGG-19 for medical image analysis, particularly in hematology. White Blood Cell (WBC) classification plays a crucial role in diagnosing various hematological disorders, including leukemia and infections. Traditional manual methods of WBC classification are time-consuming and prone to human error. Deep learning techniques, particularly Convolutional Neural Networks (CNNs), have demonstrated remarkable accuracy in medical image classification. This study explores the use of the VGG-19 architecture for automated WBC classification to enhance diagnostic efficiency and accuracy. The proposed model is trained on a labeled dataset of WBC images, leveraging the deep hierarchical features of VGG-19 to classify different WBC types, such as neutrophils, eosinophils, basophils, monocytes, and lymphocytes. Transfer learning is employed to fine-tune the pre-trained VGG-19 model, improving its performance on the specialized medical dataset. The model's performance is evaluated using accuracy, precision, recall, and F1-score metrics. Experimental results indicate that the VGG-19-based approach achieves high classification accuracy, outperforming conventional machine learning methods.

The medical diagnosis of diseases involves the detection and classification of patients from medical image data. It has an important Artificial Intelligence (AI) application in Healthcare and Neuroscience fields. In addition, Machine Learning (ML) and Deep Learning (DL) techniques provide important tasks on Neurodegenerative Diseases (ND) diagnosis from Brain MRI (Magnetic Resonance Imaging) data for image processing with good classification results. This chapter aims at comprehensive and comparative study on the performance of medical image classification with those techniques using Brain MRI datasets. We introduce a brief overview of the medical diagnosis of ND with AI applications in the neuroscience domain. In the literature part, we present the understanding of the medical image classification with Machine and Deep Learning techniques. Therefore, we describe the concept of MRI data and the Brain MRI datasets that are used in this work. In the comparison part, we focus on related works of the Artificial Neural Network (ANN) and the Deep Convolutional Neural Network (DCNN) models and we compare these models in the literature. In the methodology part, we combine the ANN and DCNN in order to propose a new Deep model named ANN-DCNN model when it is more accurate and effective to classify from those Brain images. To improve the performance of those Neural Networks in medical diagnosis applications, we discuss the recent insights and future directions.

Image patch classification is an important task in many different medical imaging applications. In this work, we have designed a customized Convolutional Neural Networks (CNN) with shallow convolution layer to classify lung image patches with interstitial lung disease (ILD). While many feature descriptors have been proposed over the past years, they can be quite complicated and domain-specific. Our customized CNN framework can, on the other hand, automatically and efficiently learn the intrinsic image features from lung image patches that are most suitable for the classification purpose. The same architecture can be generalized to perform other medical image or texture classification tasks.

The current work on emotion recognition considering EEG signals has attracted significant attention due to its advantages in fields like mental health, neural computing, and human-computer interaction. Nonetheless, accurately classifying emotions using EEG signals poses a challenge, mainly due to issues such as noise, artefacts, and high dimensionality found within EEG data. Moreover, the current problem lies in extracting meaningful emotional features while efficiently addressing the above-described challenges to improve classification accuracy. Hence, this work proposed an approach for solving the challenges in emotion classification by presenting a model that integrates Principal Component Analysis (PCA) and Convolutional Neural Network (CNN). The PCA was used for removing noise and for dimensionality reduction. In contrast, the CNN was used for extracting emotion-related features and classifying emotions, mainly the two classes, arousal and valence. The proposed PCA-CNN model was evaluated considering the DEAP dataset, where the PCA-CNN model achieved 93.58% accuracy for arousal and 92.75% for valence for subject-dependent and 81.40% accuracy for arousal and 79.84% for valence for subject-independent. The findings also show that the PCA-CNN model provided better results in handling noise and reducing data complexity, ensuring high classification performance. The novelty of the PCA-CNN model is that PCA was used for preprocessing the EEG data, and CNN was used for feature optimization, which created a more efficient emotion classifier.

Deep learning and convolutional neural networks (CNNs) in particular are increasingly popular tools for segmentation and classification of medical images. CNNs were shown to be successful for segmentation of brain tumors into multiple regions or labels. However, in the environment which fosters data-sharing and collection of multi-institutional datasets, a question arises: does training with data from another institution with potentially different imaging equipment, contrast protocol, and patient population impact the segmentation performance of the CNN? Our study presents preliminary data towards answering this question. Specifically, we used MRI data of glioblastoma (GBM) patients for two institutions present in The Cancer Imaging Archive. We performed a process of training and testing CNN multiple times such that half of the time the CNN was tested on data from the same institution that was used for training and half of the time it was tested on another institution, keeping the training and testing set size constant. We observed a decrease in performance as measured by Dice coefficient when the CNN was trained with data from a different institution as compared to training with data from the same institution. The changes in performance for the entire tumor and for four different labels within the tumor were: 0.72 to 0.65 (p=0.06), 0.61 to 0.58 (p=0.49), 0.54 to 0.51 (p=0.82), 0.31 to 0.24 (p<0.03), and 0.43 to 0.31(p<0.003) respectively. In summary, we found that while data across institutions can be used for development of CNNs, this might be associated with a decrease in performance.

Objects and processes classification is a common experimental problem. Its solution, first of all, is needed in automatic diagnosis systems, for example, to determine the equipment operation state through the diagnostic signal or to identify abnormalities with medical images. With the development of convolutional neural networks, new prospects for solving such problems have risen up. However, the classification accuracy that can be achieved on these networks is not sufficient enough for all diagnosis issues. It is subject to, for example, timely diagnosis of the onset of transient phenomena. At the same time, another type of neural network, Kohonen self-organizing maps, has a conceptual property for training on unclassified set of classes, that is, giving the opportunity to solve such an issue. Therefore, the accuracy enhancement of the classification on the basis of Kohonen networks implementation in the architecture of convolutional networks is a relevant objective and has practical significance. The article analyzes the means of improving the accuracy of convolutional neural networks and arising problems solution. The ways of increasing the proportion of correct clustering on Kohonen networks due to the ‘growth’ of its grid shape in determining new classes in the learning process are also given. It is this property that makes it possible to recognize transient phenomena. It is determined that the existing solutions of the combination of Kohonen networks and convolutional networks are aimed at improving the efficiency of only self-organizing maps, with the purpose to improve the accuracy of classification by convolutional networks, it became necessary to develop a new architecture. The paper provides a description of this issue. Since the initial information of the Kohonen networks is the weighting matrix values of the grid shape neurons, it was necessary to associate it with the representation of the images in order to process the diagnostic images. The paper proposes the concept of a built-in associative array block based on Kohonen networks. According to the proposed method, a software implementation of a hybrid neural network is developed. The formulation and results of computational experiments are presented. The efficiency of the proposed method is experimentally proved. Keywords: convolutional neural networks, CNN, Kohonen self-organizing maps, SOM, signal classification, image classification.