Mobile robot localization using indistinguishable artificial landmarks

Localization is one of many issues in mobile robot study. Localization is an essential ability for mobile robot to determine its location, so that it can plan a movement and go to a desired location. The mutual method for mobile robot localization is using a particle filter. High computation needs in particle filter is one of problem in particle filtering to get accurate location. The paper proposes a low computational mobile robot localization using a particle filter. It uses two methods: local localization using a dead reckoning method and global localization using a landmark-based vision sensor. Simulation results show that the proposed method provides a good estimation on the mobile robot position and orientation.

This paper presents a global localization method for mobile robots based on the geometric information of structured indoor environments. With a global/local point cloud and projection map, lines are extracted from the projection maps using Hough transform. According to the directions of the obtained lines, the orientations of projection maps and point clouds are normalized. Next, the template matching algorithm is applied to the normalized global and local projection maps. Once coarse localization is completed, final accurate localization is achieved using the Iterative Closest Points (ICP) algorithm. Experimental results on several point clouds show that the proposed method can achieve high localization accuracy in real-time. The proposed method can be used for other global localization applications in structured environments.

Mobile robot localization based on omnicamera

In this paper, we propose a novel method for mobile robot localization and navigation based on multispectral visual odometry (MVO). The proposed approach consists in combining visible and infrared images to localize the mobile robot under different conditions (day, night, indoor and outdoor). The depth image acquired by the Kinect sensor is very sensitive for IR luminosity, which makes it not very useful for outdoor localization. So, we propose an efficient solution for the aforementioned Kinect limitation based on three navigation modes: indoor localization based on RGB/depth images, night localization based on depth/IR images and outdoor localization using multispectral stereovision RGB/IR. For automatic selection of the appropriate navigation modes, we proposed a fuzzy logic controller based on images’ energies. To overcome the limitation of the multimodal visual navigation (MMVN) especially during navigation mode switching, a smooth variable structure filter (SVSF) is implemented to fuse the MVO pose with the wheel odometry (WO) pose based on the variable structure theory. The proposed approaches are validated with success experimentally for trajectory tracking using the mobile robot (Pioneer P3-AT).

Accurate and reliable localization is a base requirement for a mobile robot. Landmark localization is a very common technique to do this. The arrangement of landmarks is important for reliable and accurate estimation of localization data. In this paper the optimized arrangement of artificial landmarks is discussed and a solution for building an accurate and reliable localization system based on combining artificial and natural landmarks is presented. Landmark placement is done by definition and optimization of a confidence level describing the expected localization estimation error. Areas in the environment which are ill conditioned by natural landmarks are furnished with additional artificial landmarks. The proposed system has been tested in a simulation and with a mobile robot in a real office environment.

To navigate reliably in indoor environments, a mobile robot must know where it is. This includes both the ability of globally localizing the robot from scratch, as well as tracking the robot's position once its location is known. Vision has long been advertised as providing a solution to these problems, but we still lack efficient solutions in unmodified environments. Many existing approaches require modification of the environment to function properly, and those that work within unmodified environments seldomly address the problem of global localization. In this paper we present a novel, vision-based localization method based on the CONDENSATION algorithm, a Bayesian filtering method that uses a sampling-based density representation. We show how the CONDENSATION algorithm can be rued in a novel way to track the position of the camera platform rather than tracking an object in the scene. In addition, it can also be used to globally localize the camera platform, given a visual map of the environment. Based on these two observations, we present a vision-based robot localization method that provides a solution to a difficult and open problem in the mobile robotics community. As evidence for the viability of our approach, we show both global localization and tracking results in the context of a state of the art robotics application.

This paper proposes a new localization method for indoor mobile robots. Using two cameras and one laser range finder on board a TRC mobile robot, the initial position and pose of the robot can be obtained by multisensor fusion and scene matching based on geometric hashing. No correspondence calculation and special pattern recognition are needed during the scene matching. This localization method can be implemented in five stages: 1) Model the indoor environment. Some selected indoor environment features are firstly modeled off-line into hashing tables. 2) Perform system calibration and information fusion from two cameras and the range finder. 3) Extract the vertical edge points corresponding to the horizontal scanning plane of the 2D laser range finder from the scene images and transform them into geometric invariants. 4) Perform scene matching and matching verification by geometric hashing and model back- projection method respectively. 5) Perform position and pose estimation by a least square fit method. Experimental results show that the accuracy and reliability of this localization method ar quite high.

This paper aims to design and implement an indoor localization method for mobile robots based on trilateration technique, Color Code signatures (CCs) as artificial passive beacons, and a depth camera. The artificial passive beacons are designed as three disks positioned one on top of the other’s with different sizes and colors (primary colors only, RGB). The three disks share the same center. The designed beacons are placed on the ceiling to be visible from most locations within the room. The robot's model, controller, and localization method are implemented and evaluated inside the CoppeliaSim environment. The simulation results show that the CCs detecting algorithm enables the robot to discover the designed beacons, achieve an accurate localization and reach the target

Simultaneous Localizatoin and Mapping (SLAM) is an active area of robot research and the location technology of mobile robots is a very critical issue in the filed of SLAM. Low cost and high performance can not be balanced in commercial robots and we plan to achieve better performance with low-cost sensors. This paper focuses on the study of complex indoor environment and a new method of point cloud matching and low-cost mobile robot localization is presented. Firstly, we change the data within a range of distance from laser to image by building grid maps and we consider each map has no scaling relation to others. Second, fast Fourier transformation is used to get the rotation angle. In order to get translation parameters, one-dimensional Fourier transformation is used to horizontal projection and vertical projection of map. We can build maps based on positioning results. Finally, we perform comparative experiments with other common methods.

We present a mobile robot localization method for known 2D environments, which is an evidence accumulation method where the complexity is reduced by means of a multi-resolution scheme. The method is called multi-resolution evidence accumulation (MUREA). The added values of the work include: the capability of the system to accept both raw sensor data as well as independently generated localization estimates; the capability of the system to be both a global or local localization system, depending on the availability of a global estimate; and the capability of the system to give out an accurate estimate when required (e.g. before its regular completion), which could be called any-time localization. We elaborate and evaluate a strategy for travelling the search-space, which expands the pose current estimate alternating between subspaces. Real experiments, based on omnidirectional sensing in an indoor environment, are presented.

The aim of the work presented in this article is to develop a navigation system that allows a mobile robot to move autonomously in an indoor environment using perceptions of multiple events. A topological navigation system based on events that imitates human navigation using sensorimotor abilities and sensorial events is presented. The increasing interest in building autonomous mobile systems makes the detection and recognition of perceptions a crucial task. The system proposed can be considered a perceptive navigation system as the navigation process is based on perception and recognition of natural and artificial landmarks, among others. The innovation of this work resides in the use of an integration interface to handle multiple events concurrently, leading to a more complete and advanced navigation system. The developed architecture enhances the integration of new elements due to its modularity and the decoupling between modules. Finally, experiments have been carried out in several mobile robots, and their results show the feasibility of the navigation system proposed and the effectiveness of the sensorial data integration managed as events.

The hybrid localization method of straight line matching, corner matching and odometry is proposed to resolve the difficult localization problems of mobile robot operating in family indoor environment. Localization of robot is a challenge problem which involves of determining robot positioning relative to objects in the environment. The system is implemented using National Instrutment Labview platform to gain satisfied real time performance with CompactRIO support. Robot detects environment using a 2D laser range finder with TCP/IP protocol. Line feature extraction process include area divided, iterative end point fit (IEPF) and a least square technique is introduced. Based on line feature, straight lines and corners as geometry features are obtained. The detected straight lines and corners are matched with the global straight lines and corners to obtain the robot position/orientation value. The odometry localization algorithm, straight line localization algorithm and corner localization algorithm are discussed. Different weight values are distributed to straight lines, corner and odometry according to the error model. As a result stable localization is achieved with position and orientation resolution as 50mm, 5 degree. A good performance for the method is also achieved with cycle time as 120ms. Experiment shows the effectiveness of the hybrid localization method.

In this paper, a novel indoor localization method for mobile robot working in complex environment is presented. Natural features are obtained from 3D rebuilding image sequences. The geometrical relationship between the natural feature points and the homologous points of current view are found to locate the positions of a moving robot. Experiment result shows that this novel localization method is reliable and effective.

Global localization problem is one of the classical and important problems in mobile robot. In this paper, we present an approach to solve robot global localization in indoor environments with grid map. It combines Hough Scan Matching (HSM) and grid localization method to get the initial knowledge of robot's pose quickly. For pose tracking, a scan matching technique called Iterative Closest Point (ICP) is used to amend the robot motion model, this can drastically decreases the uncertainty about the robot's pose in prediction step. Then accurate proposal distribution taking into account recent observation is introduced into particle filters to recover the best estimate of robot trajectories, which seriously reduces number of particles for pose tracking. The proposed approach can globally localize mobile robot fast and accurately. Experiment results carried out with robot data in indoor environments demonstrates the effectiveness of the proposed approach.

This paper presents new object-spatial layout-route based hybrid map representation and global localization approaches using a stereo camera. By representing objects as high-level features in a map, a robot can deal more effectively with different contexts such as dynamic environments, human-robot interaction, and semantic information. However, the use of objects alone for map representation has inherent problems. For example, it is difficult to represent empty spaces for robot navigation, and objects are limited to readily recognizable things. One way to overcome these problems is to develop a hybrid map that includes objects and the spatial layout of a local space. The map developed in this research has a hybrid structure that combines a global topological map and a local hybrid map. The topological map represents the spatial relationships between local spaces. The local hybrid map combines the spatial layout of the local space with the objects found in that space. Based on the proposed map, we suggest a novel coarse-to-fine global localization method that uses object recognition, point cloud fitting and probabilistic scan matching. This approach can accurately estimate robot pose with respect to the correct local space.