Model Forecasting Development for Dengue Fever Incidence in Surabaya City Using Time Series Analysis

The primary objective of this study is to evaluate the accuracy of different forecasting models for monthly wind farm electricity production. This study compares the effectiveness of three forecasting models: Autoregressive Integrated Moving Average (ARIMA), Seasonal ARIMA (SARIMA), and Support Vector Regression (SVR). This study utilizes data from two wind farms located in Poland—‘Gizałki’ and ‘Łęki Dukielskie’—to exclude the possibility of biased results due to specific characteristics of a single farm and to allow for a more comprehensive comparison of the effectiveness of both time series analysis methods. Model parameterization was optimized through a grid search based on the Mean Absolute Percentage Error (MAPE). The performance of the best models was evaluated using Mean Bias Error (MBE), MAPE, Mean Absolute Error (MAE), and R2Score. For the Gizałki farm, the ARIMA model outperformed SARIMA and SVR, while for the Łęki Dukielskie farm, SARIMA proved to be the most accurate, highlighting the importance of optimizing seasonal parameters. The SVR method demonstrated the lowest effectiveness for both datasets. The results indicate that the ARIMA and SARIMA models are effective for forecasting wind farm energy production. However, their performance is influenced by the specificity of the data and seasonal patterns. The study provides an in-depth analysis of the results and offers suggestions for future research, such as extending the data to include multidimensional time series. Our findings have practical implications for enhancing the accuracy of wind farm energy forecasts, which can significantly improve operational efficiency and planning.

Background: Brucellosis runs rampant endemically with sporadic outbreaks in Algeria. The present study aimed to provide insights into the epidemiology of brucellosis and compare the performance of some prediction models using surveillance data from Tebessa province, Algeria. Study Design: A retrospective study.Methods: Seasonal autoregressive integrated moving average (SARIMA), neural network autoregressive (NNAR), and hybrid SARIMA-NNAR models were developed to predict monthly brucellosis notifications. The prediction performance of these models was compared using root mean square error (RMSE), mean absolute error (MAE), and mean absolute percentage error (MAPE). Results: Overall, 13670 human brucellosis cases were notified in Tebessa province from 2000-2020 with a male-to-female ratio of 1.3. The most affected age group was 15-44 years (56.2%). The cases were reported throughout the year with manifest seasonality. The annual notification rate ranged from 30.9 (2013) to 246.7 (2005) per 100000 inhabitants. The disease was not evenly distributed, rather spatial and temporal variability was observed. The SARIMA (2,1,3) (1,1,1)12', NNAR (12,1,6)12' , and SARIMA (2,0,2) (1,1,0)12- NNAR (5,1,4)12 were selected as the best-fitting models. The RMSE, MAE, and MAPE of the SARIMA and SARIMA-NNAR models were by far lower than those of the NNAR model. Moreover, the SARIMA-NNNAR hybrid model achieved a slightly better prediction accuracy for 2020 than the SARIMA model. Conclusion: As evidenced by the obtained results, both SARIMA and hybrid SARIMA-NNAR models are suitable to predict human brucellosis cases with high accuracy. Reasonable predictions, along with mapping brucellosis incidence, could be of great help to veterinary and health policymakers in the development of informed, effective, and targeted policies, as well as timely interventions.

Forecasting the dynamics of cumulative COVID-19 cases (confirmed, recovered and deaths) for top-16 countries using statistical machine learning models: Auto-Regressive Integrated Moving Average (ARIMA) and Seasonal Auto-Regressive Integrated Moving Average (SARIMA)

Dengue fever has been a continued public health problem in Bangladesh, with a recent surge in cases. The aim of this study was to train ARIMA and SARIMA models for time series analysis on the monthly prevalence of dengue in Bangladesh and to use these models to forecast the dengue prevalence for the next 12 months. This secondary data-based study utilizes AutoRegressive Integrated Moving Average (ARIMA) and Seasonal AutoRegressive Integrated Moving Average (SARIMA) models to forecast dengue prevalence in Bangladesh. Data was sourced from the Institute of Epidemiology Disease Control and Research (IEDCR) and the Directorate General of Health Services (DGHS). STROBE Guideline for observational studies was followed for reporting this study. The ARIMA (1,1,1) and SARIMA (1,1,2) models were identified as the best-performing models. The forecasts indicate a steady dengue prevalence for 2024 according to ARIMA, while SARIMA predicts significant fluctuations. It was observed that ARIMA (1,1,1) and SARIMA (1,2,2) (1,1,2) 12 were the most suitable models for prediction of dengue prevalence. These models offer valuable insights for healthcare planning and resource allocation, although external factors and complex interactions must be considered. Dengue prevalence is expected to rise in future in Bangladesh.

Compressive strength is an important mechanical property of high-strength concrete (HSC), but testing methods are usually uneconomical, time-consuming, and labor-intensive. To this end, in this paper, a long short-term memory (LSTM) model was proposed to predict the HSC compressive strength using 324 data sets with five input independent variables, namely water, cement, fine aggregate, coarse aggregate, and superplasticizer. The prediction results were compared with those of the conventional support vector regression (SVR) model using four metrics, root mean square error (RMSE), mean absolute error (MAE), mean absolute percentage error (MAPE), and correlation coefficient (R2). The results showed that the prediction accuracy and reliability of LSTM were higher with R2 = 0.997, RMSE = 0.508, MAE = 0.08, and MAPE = 0.653 compared to the evaluation metrics R2 = 0.973, RMSE = 1.595, MAE = 0.312, MAPE = 2.469 of the SVR model. The LSTM model is recommended for the pre-estimation of HSC compressive strength under a given mix ratio before the laboratory compression test. Additionally, the Shapley additive explanations (SHAP)-based approach was performed to analyze the relative importance and contribution of the input variables to the output compressive strength.

Solar energy is one of the most promising renewable energy sources in Indonesia, particularly in Bali, which has relatively high solar irradiance throughout the year. However, daily variability in solar radiation caused by weather conditions and atmospheric factors leads to fluctuations in solar energy production, making accurate forecasting essential for effective energy planning. This study aims to evaluate the performance of the Autoregressive Integrated Moving Average (ARIMA), Long Short-Term Memory (LSTM), and hybrid ARIMA–LSTM models in forecasting daily solar energy at the Jembrana Climatological Station, Bali. The dataset consists of 10-minute solar radiation observations obtained from an Automatic Weather Station (AWS) for the period January 2023 to September 2025, which were aggregated into daily solar energy values expressed in kWh/m². Data preprocessing included missing value handling, outlier correction, normalization, and an 80:20 split between training and testing datasets. Model performance was evaluated using Root Mean Square Error (RMSE), Mean Absolute Error (MAE), and Mean Absolute Percentage Error (MAPE). The results show that the hybrid ARIMA–LSTM model achieved the best performance, with an RMSE of 0.960 kWh/m², MAE of 0.771 kWh/m², and MAPE of 22.245%, outperforming both the ARIMA and LSTM models. These findings indicate that the hybrid approach is more effective in capturing both linear and nonlinear characteristics of daily solar energy time series.

BackgroundGonorrhea has long been a serious public health problem in mainland China that requires attention, modeling to describe and predict its prevalence patterns can help the government to develop more scientific interventions.MethodsTime series (TS) data of the gonorrhea incidence in China from January 2004 to August 2022 were collected, with the incidence data from September 2021 to August 2022 as the validation. The seasonal autoregressive integrated moving average (SARIMA) model, long short-term memory network (LSTM) model, and hybrid SARIMA-LSTM model were used to simulate the data respectively, the model performance were evaluated by calculating the mean absolute percentage error (MAPE), root mean square error (RMSE), and mean absolute error (MAE) of the training and validation sets of the models.ResultsThe Seasonal components after data decomposition showed an approximate bimodal distribution with a period of 12 months. The three models identified were SARIMA(1,1,1) (2,1,2)12, LSTM with 150 hidden units, and SARIMA-LSTM with 150 hidden units, the SARIMA-LSTM model fitted best in the training and validation sets, for the smallest MAPE, RMSE, and MPE.ConclusionsThe overall incidence trend of gonorrhea in mainland China has been on the decline since 2004, with some periods exhibiting an upward trend. The incidence of gonorrhea displays a seasonal distribution, typically peaking in July and December each year. The SARIMA model, LSTM model, and SARIMA-LSTM model can all fit the monthly incidence time series data of gonorrhea in mainland China. However, in terms of predictive performance, the SARIMA-LSTM model outperforms the SARIMA and LSTM models, with the LSTM model surpassing the SARIMA model. This suggests that the SARIMA-LSTM model can serve as a preferred tool for time series analysis, providing evidence for the government to predict trends in gonorrhea incidence. The model's predictions indicate that the incidence of gonorrhea in mainland China will remain at a high level in 2024, necessitating that policymakers implement public health measures in advance to prevent the spread of the disease.

Abstract: This research is driven by the challenges faced by Universitas Lancang Kuning (UNILAK) in attracting applicants amidst intense competition, especially after the government's policy opened independent pathways to State Universities (PTN) from 2022-2023, which impacted private university applicant numbers. To address this and support strategic planning, this study aims to predict the trend of prospective students applying to all study programs at UNILAK for the period 2025-2027. Two time series models were employed: ARIMA (AutoRegressive Integrated Moving Average) and LSTM (Long Short-Term Memory). Applicant data from 2019 to 2024 was used to build the model. The Augmented Dickey-Fuller (ADF) test confirmed the data's stationarity with a p-value of 0.0. ACF and PACF analyses determined the ARIMA parameters as p=1, d=1, q=1. The LSTM model was trained to capture more complex data patterns. ARIMA predictions for 2025, 2026, and 2027 are 3298.66, 3362.33, and 3371.30, respectively. LSTM predictions for the same years are 3335.64, 3476.52, and 3518.42. Evaluation using Root Mean Squared Error (RMSE) showed ARIMA (RMSE=588.72) to be more accurate than LSTM (RMSE=653.96). Nevertheless, LSTM provided a more optimistic prediction. This study concludes that ARIMA is better suited for short-term planning, while LSTM can be used for more ambitious long-term strategies. Keywords: arima; LSTM; applicants; prediction; university Abstrak: Penelitian ini didorong oleh tantangan Universitas Lancang Kuning (UNILAK) dalam menarik pendaftar di tengah persaingan ketat, khususnya setelah kebijakan pemerintah membuka jalur mandiri ke Perguruan Tinggi Negeri (PTN) sejak 2022-2023, yang menyebabkan penurunan jumlah pendaftar di universitas swasta. Untuk mendukung perencanaan strategis, studi ini bertujuan memprediksi tren jumlah calon mahasiswa yang mendaftar ke seluruh program studi di UNILAK untuk periode 2025-2027.Dua model deret waktu digunakan: ARIMA (AutoRegressive Integrated Moving Average) dan LSTM (Long Short-Term Memory). Data jumlah pendaftar dari 2019 hingga 2024 digunakan untuk membangun model. Uji Augmented Dickey-Fuller (ADF) menunjukkan data stasioner dengan p-value 0,0. Analisis ACF dan PACF menentukan parameter ARIMA sebagai p=1, d=1, q=1. Model LSTM dilatih untuk menangkap pola data yang lebih kompleks.Prediksi ARIMA untuk 2025, 2026, dan 2027 adalah 3298.66, 3362.33, dan 3371.30. Prediksi LSTM untuk tahun yang sama adalah 3335.64, 3476.52, dan 3518.42. Evaluasi menggunakan Root Mean Squared Error (RMSE) menunjukkan ARIMA (RMSE=588.72) lebih akurat daripada LSTM (RMSE=653.96). Meskipun demikian, LSTM memberikan prediksi yang lebih optimis. Studi ini menyimpulkan ARIMA lebih cocok untuk perencanaan jangka pendek, sementara LSTM dapat digunakan untuk strategi jangka panjang yang ambisius. Kata kunci: arima; LSTM; pendaftar; prediksi; universitas

Electricity is the most substantial energy form that significantly affects the development of modern life, work efficiency, quality of life, production, and competitiveness of the society in the ever-growing global world. In this respect, forecasting accurate electricity energy consumption (EEC) is fairly essential for any country?s energy consumption planning and management regarding its growth. In this study, four time-series methods; long short-term memory (LSTM) neural network, adaptive neuro-fuzzy inference system (ANFIS) with subtractive clustering (SC), ANFIS with fuzzy cmeans (FCM), and ANFIS with grid partition (GP) were implemented for the short-term one-day ahead EEC prediction. Root mean square error (RMSE), correlation coefficient (R), mean absolute error (MAE) and mean absolute percentage error (MAPE) were considered as statistical accuracy criteria. Those forecasted results by the LSTM, ANFIS-FCM, ANFIS-SC and ANFIS-GP models were evaluated by comparing with the actual data using statistical accuracy metrics. According to the testing process, the best MAPE values were obtained to be 4.47%, 3.21%, 2.34%, and 1.91% for the ANFIS-GP, ANFIS-SC, ANFIS-FCM, and LSTM, respectively. Furthermore, the best RMSE values were found as 25.94 GWh, 41.17 GWh, 29.50 GWh, and 80.14 GWh for the LSTM, ANFIS-SC, ANFIS-FCM, and ANFIS-GP models, respectively. As a consequence, the LSTM model generally outperformed all ANFIS models. The results revealed that forecasting of short-term daily EEC time series using the LSTM approach can provide high accuracy results.

The purpose of this study is to predict the decade rainfall in Semarang City using two main methods, namely Seasonal Autoregressive Integrated Moving Average with Exogenous Variables (SARIMAX) and Long Short Term Memory (LSTM). The methodology of this study begins with data pre-processing, which includes data deletion analysis using dropna and data normalization using Min-Max Scaling to reduce scale the to between 0 and 1. The dataset is then divided into 80% training data and 20% test data. The validity of the data (X_test, Y_test) using the best 56-epoch data validation (val_loss) is better than the validity of the training data (loss). On the other hand, SARIMAX uses the (2,1,2), (2,1,2,36) model, and its validation techniques include Mean Absolute Error (MAE), Root Mean Square Error (RMSE), and Coefficient of Determination (R2). Specifically, the RMSE of the LSTM model is 19.6, and its RMSE of the SARIMAX is 31.05. The MAE of LSTM is 15.0, SARIMAX is 24.5, and the R2 of LSTM is 0.814, and SARIMAX is 0.52. Lower RMSE and MAE values indicate lower prediction errors, but a higher R2 value of 1 indicates that LSTM can explain 81% of the actual data variation, which is better than SARIMAX, which is only about 52%. The main finding of this study is that the LSTM model performs better when recommending rainfall datasets.

Hydraulic support plays a key role in ground control of longwall mining. The smart prediction methods of support load are important for achieving intelligent mining. In this paper, the hydraulic support load data is decomposed into trend term, cycle term, and residual term, and it is found that the data has clear trend and period features, which can be called time series data. Based on the autoregression theory and weighted moving average method, the time series model is built to analyze the load data and predict its evolution trend, and the prediction accuracy of the sliding window model, ARIMA (Autoregressive Integrated Moving Average) model, and SARIMA (Seasonal Autoregressive Integrated Moving Average) model to the hydraulic support load under different parameters are evaluated, respectively. The results of single-point and multipoint prediction test with various sliding window values indicate that the sliding window method has no advantage in predicting the trend of the support load. The ARIMA model shows a better short-term trend prediction than the sliding window model. To some extent, increasing the length of the autoregressive term can improve the long-term prediction accuracy of the model, but it also increases the sensitivity of the model to support load fluctuation, and it is still difficult to predict the load trend in one support cycle. The SARIMA model has better prediction results than the sliding window model and the ARIMA model, which reveals the load evolution trend accurately during the whole support cycle. However, there are many external factors affecting the support load, such as overburden properties, hydraulic support moving speed, and worker’s operation. The smarter model of SARIMA considering these factors should be developed to be more suitable in predicting the hydraulic support load.

Background: Malaria remains a significant public health problem in India, particularly in endemic states such as Karnataka. Accurate forecasting of malaria incidence is essential for strengthening surveillance systems, optimizing resource allocation and enabling timely preventive interventions. Objective: This study aimed to analyze the temporal pattern of malaria cases in Karnataka State, India and to develop an appropriate Seasonal Autoregressive Integrated Moving Average (SARIMA) model for forecasting future monthly malaria incidence. Methods: A retrospective time series analysis was conducted using monthly malaria case data from January 2020 to August 2025 obtained from the National Centre for Vector Borne Diseases Control (NCVBDC), Government of India. The Box–Jenkins methodology was applied for model development. Data preprocessing included logarithmic transformation and seasonal and non-seasonal differencing to achieve stationary. Model identification was guided by autocorrelation function (ACF) and partial autocorrelation function (PACF) plots. Competing SARIMA models were estimated using maximum likelihood estimation and evaluated using Root Mean Square Error (RMSE), Mean Absolute Error (MAE), Mean Absolute Percentage Error (MAPE), and Bayesian Information Criterion (BIC). Residual diagnostics were assessed using the Ljung–Box Q test. Results: The malaria time series demonstrated a clear increasing trend with pronounced seasonal variation. Among the candidate models, the SARIMA (2,1,0) (0,1,1) ₁₂ model showed the best overall performance, with the lowest RMSE (29.413), MAE (18.279), MAPE (40.437) and normalized BIC (7.054). The Ljung–Box Q test indicated no residual autocorrelation (p = 0.77). Twelve-month forecasts (September 2025–August 2026) revealed marked seasonal peaks, with forecasted values ranging from 43 to 461 cases. Conclusion: The SARIMA (2,1,0) (0,1,1) ₁₂ model effectively captured the trend and seasonal dynamics of malaria transmission in Karnataka. SARIMA based forecasting offers a practical and reliable tool for malaria surveillance and can support evidence-based planning and timely public health interventions. Keywords: Malaria, Time series analysis, SARIMA, Forecasting, Karnataka, Public health

Tuberculosis (TB) is a global infectious disease and one of the ten leading causes of death worldwide. As TB incidence is seasonal, a reliable forecasting model that incorporates both seasonal and trend effects would be useful to improve the prevention and control of TB. In this study, the X12 autoregressive integrated moving average (X12-ARIMA) model was constructed by dividing the sequence into season term and trend term to forecast the two terms, respectively. Data regarding the TB report rate from January 2004 to December 2015 were included in the model, and the TB report data from January 2016 to December 2016 were used to validate the results. The X12-ARIMA model was compared with the seasonal autoregressive integrated moving average (SARIMA) model. A total of 383,797 cases were reported from January 2004 to December 2016 in Chongqing, China. The report rate of TB was highest in 2005 (151.06 per 100,000 population) and lowest in 2016 (72.58 per 100,000 population). The final X12-ARIMA model included the ARIMA (3,1,3) model for the trend term and the ARIMA (2,1,3) model for the season term. The SARIMA (1,0,2) * (1,1,1)12 model was selected for the SARIMA model. The mean absolute error (MAE) and mean absolute percentage error (MAPE) of fitting and predicting performance based on the X12-ARIMA model were less than the SARIMA model. In conclusion, the occurrence of TB in Chongqing is controlled, which may be attributed to socioeconomic developments and improved TB prevention and control services. Applying the X12-ARIMA model is an effective method to forecast and analyze the trend and seasonality of TB.

Time series analysis of aerosol optical depth over New Delhi using Box–Jenkins ARIMA modeling approach

Background: This study was designed to find the best statistical approach to scorpion sting predictions.Study Design: A retrospective study.Methods: Multiple regression, seasonal autoregressive integrated moving average (SARIMA), neural network autoregressive (NNAR), and hybrid SARIMA-NNAR models were developed to predict monthly scorpion sting cases in El Oued province. The root mean square error (RMSE), mean absolute error (MAE), and mean absolute percentage error (MAPE) were used to quantitatively compare different models.Results: In general, 96909 scorpion stings were recorded in El Oued province from 2005-2020. The incidence rate experienced a gradual decrease until 2012 and since then slight fluctuations have been noted. Scorpion stings occurred throughout the year with peaks in September followed by July and August and troughs in December and January. Sting cases were not evenly distributed across demographic groups; the most affected age group was 15-49 years, and males were more likely to be stung. Of the reported deaths, more than half were in children 15 and younger. Scorpion’s activity was conditioned by climate factors, and temperature had the highest effect. The SARIMA(2,0,2)(1,1,1)12, NNAR(1,1,2)12, and SARIMA(2,0,2)(1,1,1)12-NNAR(1,1,2)12 were selected as the best-fitting models. The RMSE, MAE, and MAPE of the SARIMA and SARIMA-NNAR models were lower than those of the NNAR model in fitting and forecasting; however, the NNAR model could produce better predictive accuracy.Conclusion: The NNAR model is preferred for short-term monthly scorpion sting predictions. An in-depth understanding of the epidemiologic triad of scorpionism and the development of predictive models ought to establish enlightened, informed, better-targeted, and more effective policies.