• Home
  • Search
  • MODELING AND OPTIMIZATION OF CONSTANT RETORT TEMPERATURE (CRT) THERMAL PROCESSING USING COUPLED NEURAL NETWORKS AND GENETIC ALGORITHMS
  • Cite Icon26
  • https://doi.org/10.1111/j.1745-4530.2002.tb00571.xCopy DOI Icon

MODELING AND OPTIMIZATION OF CONSTANT RETORT TEMPERATURE (CRT) THERMAL PROCESSING USING COUPLED NEURAL NETWORKS AND GENETIC ALGORITHMS

Show More
  • Abstract
  • Literature Map
  • References
  • Citations
  • Similar Papers
Abstract

ABSTRACTCoupled artificial neural network (ANN) models and genetic algorithms (GA) were applied for developing prediction models and for optimization of constant temperature retort (CRT) thermal processing of conduction heating foods. ANN prediction models were developed for process time (Pt), average quality retention (Qv), surface cook value (Fs), equivalent energy consumption (En), final temperature difference (Tg) at can center, and lethality ratio (p, heating/total lethality). The processing conditions as inputs for ANN models were as follows: retort temperature (RT = 110–140C), thermal diffusivity (α= 1.1–2.14*10−7m2/s), volume of can (V = 1.64–6.55*10−4m3), ratio of height to diameter of can (Rdh= 0.2–1.8), total desired lethality value (F0= 5–10 min) at can center and quality kinetic destruction parameters: decimal destruction time (Dq– 150–300 min) and their temperature dependence (zq= 15–40C). The data for training and testing ANN models were obtained from a finite difference computer simulation program. A second order central composite design was used for constructing the experimental data for training ANN models, while an orthogonal experimental design with 6 factors and 3 levels was used for the generalization of trained ANN models. ANN model linked Genetic Algorithms (GA) were employed for searching for the optimal quality retention and corresponding retort temperature, and for investigating the effects of main processing factors. ANN‐based prediction models successfully described the various outputs of CRT thermal processing (correlation coefficients: R2 > 0.98; relative errors: Er ≤ 3%). The coupled ANN‐GA models, verified under several typical processing conditions, could be effectively used for optimization of CRT thermal processing. The main processing conditions and their interactions in the order of their importance with respect to the optimal quality retention and corresponding retort temperature were: V >zq >Rdh >; and zq >Fd > Rdh >V, respectively.

Similar Papers
  • Research Article
  • Citations13

Prediction of Dissolution Profiles of Acetaminophen Beads Using Artificial Neural Networks

  • Jan 01, 2006
  • Pharmaceutical Development and Technology
  • Yingxu Peng +5
  • Conference Article
  • Citations11

Detection of Mooring Line Failure of a Spread-Moored FPSO: Part 1 — Development of an Artificial Neural Network Based Model

  • Jun 09, 2019
  • Djoni E Sidarta +5
  • PDF
  • Research Article
  • Citations13

Artificial Neural Network Model for the Prediction of Methane Bi-Reforming Products Using CO2 and Steam

  • May 25, 2022
  • Processes
  • Hao Deng +1
  • Research Article
  • Citations3

Dynamic and Leakage Power Estimation in Register Files Using Neural Networks

  • Jan 01, 2012
  • Circuits and Systems
  • Assim A Sagahyroon +1
  • Research Article
  • Citations41

Application of artificial neural network to predict Escherichia coli O157:H7 inactivation on beef surfaces

  • Aug 14, 2014
  • Food Control
  • Ramana Gosukonda +3
  • Book Chapter
  • Citations5

Artificial Neural Networks Modeling as a Diagnostic and Decision Making Tool

  • Jan 01, 2002
  • Zvi Boger
  • Conference Article
  • Citations2

An ANN-Based Model to Artificially Transform a Floating Vessel into a Wave Monitoring Buoy

  • Oct 27, 2020
  • Djoni Eka Sidarta +3
  • Conference Article
  • Citations21

Prediction of Offshore Platform Mooring Line Tensions Using Artificial Neural Network

  • Jun 25, 2017
  • Djoni E Sidarta +3
  • Research Article
  • Citations2

Area and Timing Estimation in Register Files Using Neural Networks

  • Jan 01, 2012
  • Circuits and Systems
  • Assim Sagahyroon +1
  • PDF
  • Research Article
  • Citations153

Comparative Analysis of ANN and SVM Models Combined with Wavelet Preprocess for Groundwater Depth Prediction

  • Oct 12, 2017
  • Water
  • Ting Zhou +2
  • Research Article
  • Citations467

Predicting the compressive strength of normal and High-Performance Concretes using ANN and ANFIS hybridized with Grey Wolf Optimizer

  • Oct 18, 2019
  • Construction and Building Materials
  • Emadaldin Mohammadi Golafshani +2
  • Research Article
  • Citations68

Prediction of instantaneous real-world emissions from diesel light-duty vehicles based on an integrated artificial neural network and vehicle dynamics model

  • Apr 27, 2021
  • Science of the Total Environment
  • Jigu Seo +5
  • Research Article
  • Citations10

CALCULATION OF FRACTAL DIMENSION BASED ON ARTIFICIAL NEURAL NETWORK AND ITS APPLICATION FOR MACHINED SURFACES

  • Jul 31, 2021
  • Fractals
  • Guo Zhou +4
  • Research Article
  • Citations133

Modeling and optimization of variable retort temperature (VRT) thermal processing using coupled neural networks and genetic algorithms

  • May 03, 2002
  • Journal of Food Engineering
  • C.R Chen +1
  • Research Article
  • Citations35

Development and application of ANN model for property prediction of supercritical kerosene

  • Jul 04, 2020
  • Computers & Fluids
  • Bo Li +4
Cactus Communications logo

Copyright 2026 Cactus Communications. All rights reserved.