Modeling and performance limits of a large aperture high-resolution wavefront control system based on a liquid crystal spatial light modulator

Synthesis and reconstruction of computer generated holograms by a double pass technique on a twisted nematic-based liquid crystal spatial light modulator

At present time methods of optical encryption are actively developed. The majority of existing methods of optical encryption use not only light intensity distribution, easily registered with photosensors, but also its phase distribution which require application of complex holographic schemes in conjunction with spatially coherent monochromatic illumination. This leads to complex optical schemes and low decryption quality. To eliminate these disadvantages it is possible to implement optical encryption using spatially incoherent monochromatic illumination which requires registration of light intensity distribution only. Encryption is accomplished by means of optical convolution of image of scene to be encrypted and encryption diffractive optical element (DOE) point spread function (PSF) which serves as encryption key. Encryption process is described as follows. Scene is illuminated with spatially-incoherent monochromatic light. In the absence of encryption DOE lens forms image of scene in photosensor plane. DOE serves as encryption element, its PSF - encryption key. Light passing through DOE forms convolution of object image and DOE PSF. Registered by photosensor convolution is encrypted image. Decryption was conducted numerically on computer by means of inverse filtration with regularization. Kinoforms were used as encryption DOE because they have single diffraction order. Two liquid crystal (LC) spatial light modulators (SLM) were used to implement dynamic digital information input and dynamic encryption key change. As input scene amplitude LC SLM HoloEye LC2002 with 800×600 pixels 32×32 μm² and 256 gray levels was used. To image synthesized encryption kinoforms phase LC SLM HoloEye PLUTO VIS with 1920×1080 pixels 8×8 μm² and 256 phase levels was used. Set of test images was successfully optically encrypted and then numerically decrypted. Encrypted images contents are hidden. Decrypted images despite quite high noise levels are positively recognizable. Results of optical encryption and numerical decryption are presented.

Liquid crystal spatial light modulators for precise dynamic manipulation of coherent light fields, used in diffractive optoelectronic optical data processing systems, are considered. This paper presents the results of a study of the temporal dynamics of the HoloEye PLUTO-2 VIS-016 liquid crystal spatial light modulator for analysis of light fields rate modulation. Experiments using binary phase computer generated holograms and binary focusing phase diffractive optical elements were conducted. Based on experimental data, the time characteristics of the modulator response were determined. It was found that when the rise time of the diffraction efficiency was 146 ms after the hologram displaying onto the SLM, and when switching to a new hologram, the decay time was 97 ms. These results allowed the dynamic generation of an alternating holograms at a refresh rate of 2 Hz with an interference level of –16 dB. Increasing the frequency of fringe pattern updates increases the level of interframe noise in the generated holograms, and when updated at the specification frequency, the generated distributions cannot be separated. Determining the actual frame rate based on the rise and decay times of the diffraction efficiency makes it possible to correctly calculate the minimum operating time of an information optical system containing a liquid crystal spatial light modulator.

Compact vectorial optical field generator based on a 10-megapixel resolution liquid crystal spatial light modulator

Liquid crystal spatial light modulators are used in a wide range of modern problems in science and technology. These modulators are used to control the amplitude, phase, and direction of propagation of coherent optical radiation in optical information processing systems. However, the influence of the characteristics of the temporal dynamics of liquid crystal spatial light modulators on the performance of information optical systems, including diffractive neural networks, has not been sufficiently studied. The article presents the results of a study of the temporal dynamics of phase modulation of the liquid crystal spatial light modulator SLM-200 (Santec, Japan). Computer-synthesized binary phase diffractive optical elements were used in the experiments, and the characteristics of the temporal dynamics of the optical modulator were measured: 125 ms is the rise time of the diffraction efficiency when displaying diffractive optical elements on the screen; 61.9 ms is the decay time when switching frames. With these characteristics, it is possible to ensure the formation of a variable optical field at a frame display frequency of 2 Hz with an interference level of –17.1 dB. Increasing the frame display frequency leads to the appearance of unavoidable interframe interference, which in turn limits the effective performance of the information system. The results obtained can be useful in designing high-performance optical information processing systems and diffraction neural networks

The square soft-edge diaphragm with round angle is designed by Matlab, and is sent to a liquid crystal spatial light modulator by the computer. In order to obtain precompensation for the following laser system, local diaphragm transmission can be adjusted by feedback signals of surface-channel charge-coupled device (SCCD). This method can reduce the diffraction effect and realize no modulation, high stability, high homogeneity, and large scale laser beam. Several parameters of soft-edge diaphragms which affect the laser beam quality are studied systematically, and the optimized values are obtained. The method can avoid the serious modulation of hard edges and provide soft-edge diaphragms of different shapes in a fast and convenient way for the large scale laser beam system.

Large numerical aperture telescope with nonlinear optical correction for distortions, designed for the remote self- luminous object imaging, was realized in experiment and investigated. Dynamic hologram, recorded in optically addressed liquid crystal spatial light modulator, was used as the corrector. Nearly diffraction limited performance of the system was demonstrated.

Liquid crystal spatial light modulator (LCSLM) realizing equal-intensity multiple beams often has some features, i.e., phase valley between two adjacent pixels, flyback region when phase decreases immediately from 2π to 0, and inevitable backplane curvature, which are different from those of most conventional diffractive optical elements (DOEs), such as static DOEs. For optimal intensity uniformity, equal-intensity multi-beam generation must be considered for these artifacts. We present a tunable-grating method in which the intensity uniformity can be improved by considering the LCSLM artifacts. For instance, tuning phase modulation depth of the grating, called isosceles triangle multilevel phase grating (ITMPG), can be used not only to improve the intensity uniformity, but also to fast steer four beams with narrow beamwidths, determined by the same effective aperture of ITMPG. Improved intensity uniformity and high relative diffraction efficiency are demonstrated through experiments with phase-only LCSLM.

An experimental platform was built for the atmospheric turbulence simulation upon a liquid crystal spatial light modulator. The phase-only spatial light modulator is driven by a series of dynamic phase screens that have non-Kolmogorov turbulence characteristics. After passing through the simulated non-Kolmogorov turbulence, the angle-of-arrival (AoA) and light intensity of the laser beam were analyzed statistically. The variation trends of the AoA fluctuation and the scintillation index exhibited by the experimental results are in accordance with the theoretical predictions. Although there was some divergence between the experiments and theory that needs to be improved further, the experimental data demonstrate the feasibility of using the platform to simulate the turbulence influence on laser communication in the lab.

Retrocommunication is a new technique for asymmetric free-space optical communication that has attracted interest during recent years. Novel technologies such as multiple quantum well (MQW) optical modulators and non-mechanical laser beam steering and tracking have been studied for implementation in a retrocommunication link. Large and small aperture reflective AlGaAs/GaAs MQW modulators were optimised and fabricated. The modulators exhibit high contrast ratios (from 5 to 100) and high modulation rates (up to 16 Mbit/s). A retroreceiver consisting of four large aperture MQW modulators, associated optics and drive electronics was fabricated. Nematic liquid crystal spatial light modulators have been evaluated, characterised for beam steering and tracking and implemented in a transceiver. Small area MQW modulators, used in focal plane configurations, were studied for static communication links. Results from a novel retrocommunication link utilising a retroreceiver and non-mechanical laser beam steering and tracking will be presented. Bit rates of 8 Mbit/s were observed during non-mechanical tracking of a moving retroreceiver over 100 m range. The demonstrator system was capable of transferring audio-, real-time images or bit streams. The demonstrated principles show promising features for future low weight free-space communication links. Performance calculations including requirements for a retrocommunication link using MQW modulators and non-mechanical beam steering are discussed.

In order to optically vary the magnification of an imaging system, continuous mechanical zoom lenses require multiple optical elements and use fine mechanical motion to precisely adjust the separations between individual or groups of lenses. By incorporating active elements into the optical design, we have designed and demonstrated imaging systems that are capable of variable optical magnification with no macroscopic moving parts. Changing the effective focal length and magnification of an imaging system can be accomplished by adeptly positioning two or more active optics in the optical design and appropriately adjusting the optical power of those elements. In this application, the active optics (e.g. liquid crystal spatial light modulators or deformable mirrors) serve as variable focal-length lenses. Unfortunately, the range over which currently available devices can operate (i.e. their dynamic range) is relatively small. Therefore, the key to this concept is to create large changes in the effective focal length of the system with very small changes in the focal lengths of individual elements by leveraging the optical power of conventional optical elements surrounding the active optics. By appropriately designing the optical system, these variable focal-length lenses can provide the flexibility necessary to change the overall system focal length, and therefore magnification, that is normally accomplished with mechanical motion in conventional zoom lenses.

Preface. Unconventional Imaging and Processing. Coherence Methods for Unconventional Imaging Processes E.N. Leith. Some Diffractive - Optical Systems Based on Novel Gratings A.W. Lohmann. Technologies and Potential Applications of Adaptive Optics J.C. Dainty. Pattern Recognition with Joint Transform Correlators - Recent Developments E. Marom, et al. Storage of 3D Information on 2D Elements J. Shamir. Generalized Super Resolution Approach based on the Degrees of Freedom Hyper-Space Adaptation D. Mendlovic, et al. Diffractive Elements and Microoptics. Real-Time Holographic Interferometry in Photorefractive BTO Crystals Using Optical Phase Conjugation with a Low Power Laser Diode V.I. Vlad, et al. Planar Diffractive Elements for Compact Optics Y. Amitai, et al. Design and Fabrication Issues in Subwavelength Diffractive Optical Elements P. Chavel, P. Lalanne. Subwavelength and quasi-Subwavelength Diffractive Optical Elements L.M. Bernardo. Microsystems for Optical Imaging and Interconnects R. Dandliker, et al. Micro-Optical Components for Information Technology Fabricated via LIGA Technique H.-D. Bauer, et al. Nonlinear and Ultrafast Optics. Nonlinear Photonic Engineering: Physics and Applications J. Zyss, et al. Novel Optical Phenomena in Near-Critical Photorefractive Crystals: Diffusion Driven Diffraction and Spontaneous Self-Trapping B. Crosignani, et al. Frequency Upconversion of Lasers with Optical Parametric Oscillators O. Aytur. Characterization of Nonlinear Optical Materials for Photonic Applications S. Couris, et al. Adaptive Techniques in Ultrafast Optics Y. Silberberg, et al. Nonlinear Spatio-Temporal Information Processing with Femtosecond Laser Pulses Y. Fainman, etal. Optical Communication. All-Optical Semiconductor Switching Devices for Applications in Optical Communication Systems S. Diez, et al. Computer Modeling of Optical Fibers and Waveguides M.S. Al Salameh, S.A. Alkhawaldeh. Tbit/sec Optical ATM Switch Utilizing Dynamic WDM Technology D. Sadot. Towards Uniform Channel Performance in Dynamic WDM Systems and Networks A.E. Willner. Devices, Interconnects and Switching. Resonant Structures for Optical Processing and Communication A.A. Friesem, et al. Liquid Crystal Spatial Light Modulators as Intracavity Laser Elements and Dynamic Holographic Correctors for Distortions in Optical Systems V. Berenberg, et al. Fundamental Issues in Optical Interconnections H.M. Ozaktas. The Electroholographic Optical Switches and Interconnects A.J. Agranat, et al. VIVALDI -- Variations on a Theme of Optical Crossbars T.J. Hall. Laser-Material Interactions and Optical Storage. Laser Materials Processing for Optoeelectronics and Information Systems N.A. Vainos. Recording in Quantum Dot Glasses by Pulsed Laser Irradiation Y. Kaganovskii, et al. Photorefractive Volume Holographic Memories for Associative Storage and Processing in a Multimedia Environment P.A. Mitkas, G. Betzos. Characteristics and Applications of Volume Phase Holographic Gratings Recorded in Photo-Thermo-Refractive Glasses M.G. Moharam, S. Dunn. Optical Research in Israel. Electrooptics in Israel M. Oron. Subject Index. Author Index.

A method is proposed for phase conjecture based on the intensity curve of a two-dimensional (2D) image by computing a polynomial equation. The intensity values of the 2D image, which represents the distance between the image detectors and the three-dimensional (3D) scene is converted to phase information by our method. The results of numerical calculation with phase conjecture are analyzed. And what’s more, the numerical reconstruction results with phase information obtained as initial phase factors of a complex object for Fresnel kinoform and dynamic pseudorandom-phase tomographic computer holography(DPP-TCH) are compared. The peak signal-to-noise ratio (PSNR) and correlation coefficient (CC) between the reconstructed images and original object are analyzed. An experimental system is designed for photoelectric holographic reconstruction based on phase-only liquid crystal spatial light modulator (LC-SLM) and mist screen. The electro-optical experimental results indicate that suppressed the speckle noise 3D images that can be observed with naked eye have been obtained.

Compact optical processing systems are being achieved by the assembly of miniature components. This paper considers the development of integrated 2-D optical processing systems based on planar optics structures and free space communication. Active liquid-crystal optical elements in planar optics form are discussed. Attention is drawn to the use of optically addressed liquid crystal spatial light modulators (OASLM) as demonstration vehicles for planar optics structures. An exclusive NOR optical gate is demonstrated in planar optics form using a nematic liquid-crystal OASLM.

We discuss the design and implementation of a low-cost, high-resolution adaptive optics test-bed for vision research. It is well known that high-order aberrations in the human eye reduce optical resolution and limit visual acuity. However, the effects of aberration-free eyesight on vision are only now beginning to be studied using adaptive optics to sense and correct the aberrations in the eye. We are developing a high-resolution adaptive optics system for this purpose using a Hamamatsu Parallel Aligned Nematic Liquid Crystal Spatial Light Modulator. Phase-wrapping is used to extend the effective stroke of the device, and the wavefront sensing and wavefront correction are done at different wavelengths. Issues associated with these techniques will be discussed.