Modeling research on wheat protein content measurement using near-infrared reflectance spectroscopy and optimized radial basis function neural network

This paper uses a radial basis function (RBF) neural network for star identification. A feature vector consisting of distance and angle cosine values is constructed as a library of recognition feature stars and input to the neural network. Then, the network’s output is the number of the corresponding primary star. Comparing the training efficiency and robustness of the grid algorithm with the BP neural network and radial basis function neural network for star identification, the experimental results show that the radial basis function neural network has a strong anti-interference ability against noise and pseudo-star interference. The following conclusions are drawn from the simulation tests: the sample recognition rate of radial basis function neural network algorithm can reach 96% for star position and star addition noise; when the proportion of pseudo-star reaches 20%, the sample recognition rate of radial basis function neural network algorithm is still higher than grid algorithm and BP neural network, which indicates that the radial basis function neural network algorithm has the solid anti-interference ability to both noise and pseudo-star. Therefore, the radial basis function neural network algorithm based on star Identification has specific application prospects.

In this paper, we are going to propose an online radial basis function (RBF) neural network algorithm without any preprocessing step. Then a kernel principal component analysis (KPCA) is coupled with the proposed online RBF neural network algorithm. Indeed, the KPCA method is used as a preprocessing step to reduce the feature dimension which fed to the RBF neural network. Reducing memory requirements of the models makes RBF neural network training efficient and fast. These two proposed algorithms are applied, with success, for identification of a mobile robot position. The simulation results present that the used sigmoid function as a kernel, compared to other kernel functions, which gives an excellent model and a minimum mean square error.

The timely detection of information on crop nutrition is of great significance for improving the production efficiency of facility crops. In this study, the terahertz (THz) spectral information of tomato plant leaves with different nitrogen levels was obtained. The noise reduction of the THz spectral data was then carried out by using the Savitzky-Golay (S-G) smoothing algorithm. The sample sets were then analyzed by using Kennard-Stone (KS) and random sampling (RS) methods, respectively. The KS algorithm was optimized to divide the sample sets. The stability competitive adaptive reweighted sampling (SCARS), uninformative variable elimination (UVE), and interval partial least-squares (iPLS) algorithms were then used to screen the pre-processed THz spectral data. Based on the selected characteristic frequency bands, a model for the detection of the nitrogen content of tomato based on the THz spectrum was established by the radial basis function neural network (RBFNN) and backpropagation neural network (BPNN) algorithms, respectively. The results show that the root-mean-square error of correction (RMSEC) and root-mean-square error of prediction (RMSEP) of the BPNN model were respectively 0.1722% and 0.1843%, and the determination coefficients of the correction set (Rc 2) and prediction set (Rp 2) were respectively 0.8447 and 0.8375. The RMSEC and RMSEP values of the RBFNN model were respectively 0.1322% and 0.1855%, and the Rc 2 and Rp 2 values were respectively 0.8714 and 0.8463. Thus, the accuracy of the model established by the RBFNN algorithm was slightly higher. Therefore, the nitrogen content of tomato leaves can be detected by THz spectroscopy. The results of this study can provide a theoretical basis for the research and development of equipment for the detection of the nitrogen content of tomato leaves.

Fault diagnosis for wireless sensor is very important to ensure signal acquisition precision. Radial basis function (RBF) neural network has strong classification ability. However, the selection of the connection weights, the hidden centers and the widths has an important influence on the classification performance of the RBF neural network in the learning process of RBF neural network. Thus, ant colony optimization is employ to gain the parameters of radial basis function neural network. Therefore, a novel method for fault diagnosis of wireless sensor based on RBF neural network and ant colony optimization is presented. The results of computational experiments show that ACO- RBF neural network has a great higher than RBF neural network.

Nondestructive determination of compound amoxicillin powder by NIR spectroscopy with the aid of chemometrics

The present paper proposes a fault diagnosis methodology of three phase inverter circuit base on radial basis function (RBF) artificial neural network trained by particle swarm optimization (PSO) algorithm. Using the appropriate stimulus signal, fault features are extracted from efficient points in frequency response of the circuit directly and then a fault dictionary is created by collecting signatures of different fault conditions. Trained by the examples contained in the fault dictionary, the RBF neural network optimized by PSO has been demonstrated to provide robust diagnosis to the difficult problem of soft faults in three phase inverter circuits. The experimental result shows that the proposed technique is succeeded in diagnosing and locating faults effectively. Keyword: three phase inverter circuit, RBF neural network, fault diagnosis, particle swarm optimization.

There are many methods can be used to calculate ship's magnetic field such as harmonic wave analysis, finite element method, integral equation method, boundary element method and so on. But these methods generally have disadvantage of complex calculation and poor universality. In this paper, we have built a predicted model based on improved Radial Basis Function (RBF) neural network to study the relationship between ship's important parameters and magnetic field directly. Generally, the parameters of RBF are set by experience. In order to get the best result, we have chosen the spread parameter according to Particle Swarm Optimization (PSO) algorithm and verified the effect of network by an example.

The increasing use of computer numerical control (CNC) machines requires better prediction of the reliability of their servo control systems. A novel reliability prediction model based on radial basis function (RBF) neural network optimized by improved particle swarm optimization (IPSO) was proposed. It can overcome the disadvantages of conventional methods, which are time consuming and resource intensive. The major influences on the reliability of servo system include torque, temperature, current, and complexity. An improved algorithm for predicting the mean time between failure (MTBF) of servo systems based on a particle swarm optimization (PSO) and an RBF neural network algorithm is proposed. Two common problem of the PSO: local minimization and slow convergence were solved by the IPSO. “Zero failure” data preprocessing, data normalization, and small-sample data enhancement were performed on the original data. A homogenized sampling method is proposed to extract training and testing samples. Experimental results show that the improved PSO-based RBF neural network is superior to back propagation (BP) and RBF networks in terms of accuracy in servo system reliability prediction.

In the process of moisture content's measurement with microwave resonant cavity based on RBF (radial basis function) neural network, the relationship among resonant frequency, quality factor and environmental temperature (the inputs of network) and moisture content (the output of network) is multiple non-linear. The performance of multiple non-linear regression algorithm is the major factor that determines the accuracy of measurement. A regression algorithm based on a RBF neural network is put forward to improve the measurement result in this paper. The RBF neural network regression algorithm can effectively avoid the BP algorithm disadvantages such as getting into local minimum and the low efficiency, and has the advantages such as high generalization precision and rapid convergence. Consequently, the measurement accuracy is enhanced. In this paper, experimental results show that the high-precision measurement value of moisture content can be obtained with the multiple non-linear regression algorithm based on RBF neural network.

In this study, we propose a revised radial basis function (RBF) neural network algorithm and apply this algorithm to computer-aided diagnosis (CAD) of the liver. First, the revised RBF neural network algorithm is applied to recognition of the liver regions, and the recognition results are compared with those obtained using the conventional RBF neural network and the conventional multilayered neural network trained using the back-propagation algorithm. It is shown that the revised RBF neural network is accurate, and is a useful method because the parameters are automatically determined. Then, the revised RBF neural network is applied to CAD of the liver cancer called hepatocellular carcinoma (HCC).

Optimization study of vehicle thermal management based on vibration heat dissipation

Digital image recognition of plant diseases could reduce the dependence of agricultural production on the professional and technical personnel in plant protection field and is conducive to the development of plant protection informatization. In order to find out a method to realize image recognition of plant diseases, four kinds of neural networks including backpropagation (BP) networks, radial basis function (RBF) neural networks, generalized regression networks (GRNNs) and probabilistic neural networks (PNNs) were used to distinguish wheat stripe rust from wheat leaf rust and to distinguish grape downy mildew from grape powdery mildew based on color features, shape features and texture features extracted from the disease images. The results showed that identification and diagnosis of the plant diseases could be effectively achieved using BP networks, RBF neural networks, GRNNs and PNNs based on image processing. For the two kinds of wheat diseases, the best prediction accuracy was 100% with the fitting accuracy equal to 100% while BP networks, GRNNs or PNNs were used, and the best prediction accuracy was 97.50% with the fitting accuracy equal to 100% while RBF neural networks were used. For the two kinds of grape diseases, the best prediction accuracy was 100% with the fitting accuracy equal to 100% while BP networks, GRNNs or PNNs were used, and the best prediction accuracy was 94.29% with the fitting accuracy equal to 100% while RBF neural networks were used.

Hyaluronic acid (HA) is a natural biopolymer with unique physiochemical and biological properties and finds a wide range of applications in biomedical and cosmetic fields. It is important to increase HA production to meet the increasing HA market demand. This work is aimed to model and optimize the amino acids addition to enhance HA production of Streptococcus zooepidemicus with radial basis function (RBF) neural network coupling quantum-behaved particle swarm optimization (QPSO) algorithm. In the RBF-QPSO approach, RBF neural network is used as a bioprocess modeling tool and QPSO algorithm is applied to conduct the optimization with the established RBF neural network black model as the objective function. The predicted maximum HA yield was 6.92 g/L under the following conditions: arginine 0.062 g/L, cysteine 0.036 g/L, and lysine 0.043 g/L. The optimal amino acids addition allowed HA yield increased from 5.0 g/L of the control to 6.7 g/L in the validation experiments. Moreover, the modeling and optimization capacity of the RBF-QPSO approach was compared with that of response surface methodology (RSM). It was indicated that the RBF-QPSO approach gave a slightly better modeling and optimization result compared with RSM. The developed RBF-QPSO approach in this work may be helpful for the modeling and optimization of the other multivariable, nonlinear, time-variant bioprocesses.

Dissolved oxygen (DO) as one of the most fundamental parameters of water quality plays a vital role in aquatic life. This study was conducted to predict DO, biological oxygen demand (BOD), and chemical oxygen demand (COD) in an intensive rainbow trout rearing system with different biomass (B). The multilayer perceptron (MLP) and the radial basis function (RBF) neural networks were employed for evaluating the impacts of food parameters (crude protein (CP), consumed feed (CF)), fish parameters (different values of B, and weight gain (WG)), and water quality parameters including temperature (T) and flow rate (Q) on variation of DO, BOD, and COD concentrations. This study's results showed that although both MLP and RBF neural networks are capable to estimate DO, BOD, and COD concentrations, RBF neural network showed better performance compared to MLP neural network. The results of sensitivity analysis indicated that the parameter CF has the highest effect on DO concentration estimation. Independent variables CF, CP, WG, and B showed the highest to the lowest rank of impacts on BOD estimation, respectively. The results also illustrated a decreasing trend of the effects on the estimation error of COD changes simulation by all independent variables, including B, T, WG, CF, CP, and Q, respectively. RBF neural network based on better stability and generalization ability with average root mean square error (RMSE) and mean absolute percentage error (MAPE) values of less than 0.12 and 3% was superior to MLP in DO, BOD, and COD concentration prediction. Moreover, CF was identified as the most effective factor in estima12tion process. Based on the present study results, there are direct relationships between DO, BOD, and COD concentrations and water quality parameters, fish parameters, and food parameters. Food parameters relative to fish and water quality parameters imposed the greatest effects. Improvement in feeding process such as application of intelligence feeding methods and change in fish diet and feeding time can considerably reduce losses in production system. Graphical abstract.

This article introduces the design and implementation of a fishery forecasting system based on Radial Basis Function (RBF) neural network. The system was developed using the CLient/Server architecture, the C# programming language in the environment of Visual Studio 2008 on the Windows7 platform. It draws knowledge from RBF neural network theory, the production historical data of pelagic fishery and the marine environment data. The system uses the Object-Oriented analysis and design method. It can quickly obtain the forecast results available to users through inputting marine environment data information and the RBF neural network model. The forecasting system includes three major functional modules, namely preprocessing fishery production data, matching production data and environmental data, training RBF neural network and making predictions. Experiments have shown that this forecasting system can generate accurate and effective pelagic fishery knowledge.