- Research Article
22
- 10.1016/j.apor.2011.10.001
Hydrodynamic forces on a semi-displacement ship at high speed
- Nov 08, 2011
- Applied Ocean Research
- Hui Sun + 1 more +1
Hydrodynamic forces on a semi-displacement ship at high speed
A modified predictor‐corrector scheme combining with the depth gradient method (DGM) and the weighted average flux (WAF) method has been presented to solve the one‐dimensional shallow water equations with source terms. Approximate solutions in the predictor step are obtained by the DGM with piecewise‐linear reconstructions in each cell volume. The source terms can then be calculated directly by these predicted values at the corresponding half‐time step. In the corrector step, the TVD version of the WAF method is applied to calculate the numerical fluxes at the same half‐time step for each cell face. The accuracy of numerical solutions is shown by applying the method to solve various test cases in both steady and unsteady problems with and without source terms. It shows that the numerical results are in good agreement with the existing analytical solutions as well as experimental data in some test cases.
Loading PDF
Hydrodynamic forces on a semi-displacement ship at high speed
Hydrodynamic forces on a semi-displacement ship at high speed
Energy balanced numerical schemes with very high order. The Augmented Roe Flux ADER scheme. Application to the shallow water equations
Energy balanced numerical schemes with very high order. The Augmented Roe Flux ADER scheme. Application to the shallow water equations
Read moreComprehensive evaluation of structural geometrical nonlinear solution techniques Part I: Formulation and characteristics of the methods
This paper consists of two parts, which broadly examines solution techniques abilities for the structures with geometrical nonlinear behavior. In part I of the article, formulations of several well-known approaches will be presented. These solution strategies include different groups, such as: residual load minimization, normal plane, updated normal plane, cylindrical arc length, work control, residual displacement minimization, generalized displacement control, modified normal flow, and three-parameter ellipsoidal, hyperbolic, and polynomial schemes. For better understanding and easier application of the solution techniques, a consistent mathematical notation is employed in all formulations for correction and predictor steps. Moreover, other features of these approaches and their algorithms will be investigated. Common methods of determining the amount and sign of load factor increment in the predictor step and choosing the correct root in predictor and corrector step will be reviewed. The way that these features are determined is very important for tracing of the structural equilibrium path. In the second part of article, robustness and efficiency of the solution schemes will be comprehensively evaluated by performing numerical analyses.
Read more2D well-balanced augmented ADER schemes for the Shallow Water Equations with bed elevation and extension to the rotating frame
2D well-balanced augmented ADER schemes for the Shallow Water Equations with bed elevation and extension to the rotating frame
Read more1D flow simulation with irregular cross-sections using the pre-balanced shallow water equations
<p>With the possible climate change and increased pace of urbanization in the century, urban flooding has caused more and more attentions nowadays. Shallow water equations are widely used to reproduce the flow hydrodynamics of flooding around the urban areas, which have been proved a powerful tool for flood risk assessment and evacuation management, like river flow or flowing at drainage networks with irregular cross-sections at 1D scale. Over the last two decades, Godunov-type schemes have became popular for its robustness treating complex flow phenomenons. When tacking complex topography in the framework of Godunov-type scheme, sourer term needs to be treated property to preserve steady state, that flux gradient and sourer term are balanced. Capart et al. (2003) reconstructed the momentum flux by considering the balance of hydrostatic pressure with the approximated water surface level, which has the ability to tackle the irregular and non-prismatic channel flow with complex topography. This approximation is exact for two cases: 1) rectangular and prismatic channel; 2) water surface is horizontal. However, for other cases, approximation is employed to achieve the hydrostatic equilibrium, which has reduced the accuracy of the numerical solution and increased the complexity for the model implementation. </p><p>In this work, we present a new well-balanced numerical scheme for simulating 1D frictional shallow water flow with irregular cross-sections over complex topography involving wetting and drying. The proposed scheme solves, in a finite volume Godunov-type framework, a set of pre-balanced shallow water equations derived by considering pressure balancing (Liang and Marche, 2009). HLL approximated Riemann solver is adopted for the flux calculation at the cell interface. Non-negative reconstruction of Riemann state (Audusse et al., 2004) and local bed modification (Liang, 2010) produce stable and well-balanced solutions to shallow water flow hydrodynamics. Bed slope source term can be approximated using central difference and no special treatment is needed for wet and dry bed. The friction source term is discretized using a splitting implicit scheme and limiting value of friction force is used to ensure stability for the dry bottom (Liang and Marche, 2009). The new numerical scheme is validated against two theoretical benchmark tests and then compared with the validated shallow water model with circular and trapezoid cross-sections over complex topography involving wetting and drying. This method is also possible to reproduce the mixed flow in the conduit or for the flow with non-prismatic channel like river flow in the near future.</p><p>References</p><p>Audusse, E., Bouchut, F., Bristeau, M. O., Klein, R., & Perthame, B. T. (2004). A fast and stable well-balanced scheme with hydrostatic reconstruction for shallow water flows. SIAM Journal on Scientific Computing, 25(6), 2050-2065.</p><p>Capart, H, Eldho, TI, Huang, SY, Young, DL, and Zech, Yves, "Treatment of natural geometry in finite volume river flow computations", Journal of Hydraulic Engineering 129, 5 (2003), pp. 385--393.</p><p>Liang, Qiuhua and Marche, Fabien, "Numerical resolution of well-balanced shallow water equations with complex source terms", Advances in water resources 32, 6 (2009), pp. 873--884.</p><p>Liang, Qiuhua, "Flood simulation using a well-balanced shallow flow model", Journal of hydraulic engineering 136, 9 (2010), pp. 669--675.</p>
Read moreImproved FVM for two-layer shallow-water models: Application to the Strait of Gibraltar
Improved FVM for two-layer shallow-water models: Application to the Strait of Gibraltar
A Weighted Average Flux (WAF) scheme applied to shallow water equations for real-life applications
A Weighted Average Flux (WAF) scheme applied to shallow water equations for real-life applications
Three-Layer Non-hydrostatic Staggered Scheme for Free Surface Flow
In this paper, a finite difference algorithm using a three-layer approximation for the vertical flow region to solve the 2D Euler equations is considered. In this algorithm, the pressure is split into hydrostatic and hydrodynamic parts, and the predictor-corrector procedure is applied. In the predictor step, the momentum hydrostatic model is formulated. In the corrector step, the hydrodynamic pressure is accommodated after solving the Laplace equation using the Successive Over Relaxation (SOR) iteration method. The resulting algorithm is first tested to simulate a standing wave over an intermediate constant depth. Dispersion relation of the scheme is derived, and it is shown to agree with the analytical dispersion relation for kd < π with 94% accuracy. The second test case is a solitary wave simulation. Our computed solitary wave propagates with constant velocity, undisturbed in shape, and confirm the analytical solitary wave. Finally, the scheme is tested to simulate the appearance of the undular bore. The result shows a good agreement with the result from the finite volume scheme for the Boussinesq-type model by Soares-Frazão and Guinot (2008).
Read moreThree-dimensional shock wave reflection over a corner of two intersecting wedges
This paper presents an experimental and numerical investigation of three-dimensional shock wave reflections over a corner of two wedges intersecting perpendicularly in a shock tube. Experiments were conducted in a \(100\,{\rm mm} \times 180\,{\rm mm}\) diaphragmless shock tube equipped with double-exposure diffuse holographic interferometry in which the time interval between the first and second exposure was set to be \(1 \,{\rm \mu s}\). This arrangement clearly visualized complex configurations of three-dimensional shock wave reflections. A numerical study was also carried out for interpreting these holographic interferometric observations by using the Weighted Average Flux (WAF) method to solve the three-dimensional unsteady compressible Euler equations. It was found that along the line of the intersection of these two wedges, two Mach stems intersected each other resulting in the formation of a Mach stem which leaned forward.
Read moreThe exact Riemann Solver to the Shallow Water equations for natural channels with bottom steps
The exact Riemann Solver to the Shallow Water equations for natural channels with bottom steps
A unified immersed boundary-lattice Boltzmann flux solver (UIB-LBFS) for simulation of flows past porous bodies
A novel numerical method named the unified immersed boundary-lattice Boltzmann flux solver (UIB-LBFS) for simulating incompressible flows past homogeneous porous bodies is proposed in this paper. A diffuse layer through which the porosity is smoothly changed is introduced. As a consequence, the governing equations in the porous domain and the pure-fluid domain can be unified. The solutions to each domain can be smoothly transitioned from one to the other through the diffuse layer around the domain interface. A fractional-step technique is employed to split the computational procedure into the predictor step and the corrector step, respectively. In the predictor step, an intermediate flow field is first predicted without considering the domain interface by the unified lattice Boltzmann flux solver. Then, the physical conditions at the fluid–porous interface are implemented through the immersed boundary method to correct the flow field in the corrector step. All the flow quantities are evaluated at the cell centers, while the viscous and the inviscid numerical fluxes are locally reconstructed at each cell interface simultaneously. Numerical validations are carried out, and excellent agreements between the present and published results are achieved. The accuracy and the reliability of the UIB-LBFS are thus proven.
Read moreWeak solutions for partial differential equations with source terms: Application to the shallow water equations
Weak solutions for partial differential equations with source terms: Application to the shallow water equations
High-Order Models for Gas Transport in Multiscale Coal Rock.
The coal reservoirs exhibit great heterogeneity and strong anisotropy in multiscale pore/fracture structures. Developing highly accurate multiscale models for real-time prediction of microgaseous flow in complicated porous media with pronounced contrast in transport coefficients is crucial but not yet available, which is time-consuming, expensive, and even computationally impossible. In this study, a multiscale approximate solution of the gas flow and pressure field is derived in this paper for predicting coalbed methane (CBM) transport in macro-microscopic two-scale porous media of typical coal rocks in Guizhou Province, China, and the detailed finite element algorithm is established. The multiscale approximate solutions are constructed from the first- and second-order auxiliary cell functions and low- or high-order derivatives of the homogenized pressure field, which can accurately approximate the solution of the original problem to a certain extent. The numerical accuracy and validity of the multiscale approximate solutions under various working conditions are analyzed in detail by comparing and verifying the results with the direct numerical simulation results of fine-mesh high-precision finite elements. The results show that the homogenized approximate solution can only roughly capture the characteristics of the macroscopic pressure evolution, the first-order approximate solution can partially reproduce the macro-microscopic pressure oscillation phenomenon, and the second-order approximate solution can accurately predict the pressure profile and its evolution law with time in porous media with macro-micro configuration under various complex conditions. The second- and high-order two-scale approximate solutions constructed in this paper exhibit high numerical accuracy and excellent computational efficiency. We also develop multiscale approximate solutions for predicting microgaseous flow at a low reservoir pressure where the slippage effects are very pronounced. Potential applications of our high-order models to the coal reservoirs with a hierarchical matrix and fractures are discussed. The developed multiscale models exhibit excellent applicability to investigating the crossflow effects and coupling mechanisms between the matrix and cleats or fractures with multiple configurations in the CBM and shale gas reservoirs, which is crucial for the effective implementation of hydraulic fracturing technology. This study provides a fundamental understanding of gas transport in multiscale matrix-fracture networks, which helps to improve the optimization design of hydraulic fracturing in tight reservoirs.
Read moreModified liquid entrainment fraction correlation for varying pipe orientation and system pressure
Modified liquid entrainment fraction correlation for varying pipe orientation and system pressure
Towards district scale flood simulations using conventional and anisotropic porosity shallow water models with high-resolution topographic information
Current topographic survey technology provides high-resolution (HR) datasets for urban environments. Incorporating this HR information in models aiming to provide flood risk assessment is desirable because the flood wave propagation is depending on the urban topographic features, i.e. buildings, bridges and street networks. Conceptual, numerical and practical challenges arise from the application of shallow water models to HR urban flood modeling. For instance, numerical challenges are occurrence of wet-dry fronts, geometric discontinuities in the urban environment and discontinuous solutions, i.e. shock waves. These challenges can be overcome by using a Godunov-type scheme. However, the computational cost of this type of schemes is high, such that HR two-dimensional shallow water simulations with practical relevance have to be run on supercomputers. The porous shallow water model is an alternative approach that aims to reduce computational cost by using a coarse resolution and accounting for unresolved processes by means of the porosity terms. Usually, a speedup between two and three orders of magnitude in comparison to HR simulations can be obtained. This study reports preliminary results of a practical test case concerning pluvial flooding in a district of the city of Nice, France, caused by the intense rainfall event on October 3rd, 2015. HR topography data set on a 1 m resolution is available for the district, whereby street features of infra-metric dimensions have been included. A reference solution is calculated by a HR shallow water model on a 1 m by 1 m structured computational grid. The porous shallow water model is run on a 10 m by 10 m grid and the influence of the drag source term is studied. The model results show a large deviation, which is caused by the poor meshing strategy of the porous shallow water (AP) model. The study also summarizes practical challenges that arise during the application of the AP and HR models to a large urban catchment. The main difficulty is to obtain a good mesh. In smaller scale investigations, the mesh is currently constructed by hand such that the cell edges align with buildings. This approach is not feasible for large scale urban catchments with a large number of buildings. Future steps that have to be taken, such as a strategy for automatic mesh generation, are reported on.
Read more