Molecular simulations of imidazolium-based tricyanomethanide ionic liquids using an optimized classical force field.

We present here a new model for the imidazolium-based ionic liquids (ILs) with the bis(trifluoromethylsulfonyl)imide anion [Tf(2)N](-) in the context of the soft-SAFT EoS. The model is used to predict the solubility of several compounds in these ILs, and results are compared to available experimental data. Since in the soft-SAFT EoS an associating site is used to represent a short-range and highly directional attractive force among molecules, we have used this feature to mimic the main interactions between the anion and the cation for the alkylimidazolium-[Tf(2)N] ILs. The members of the alkylimidazolium-[Tf(2)N] family are modeled as Lennard-Jones chains with three associating sites in each molecule (one "A" site and two "B" sites). An "A" site represents the nitrogen atom interactions with the cation, and a "B" site represents the delocalized charge due the oxygen molecules on the anion. Each type of associating site is identically defined, but only AB interactions between different IL molecules are allowed. Model parameters for the ionic liquids were estimated with experimental density data from different authors, following a similar approach taken in our previous work [Andreu and Vega, J. Phys. Chem. C 2007, 111, 16028]. The new set of parameters was used to study the solubility behavior of hydrogen, carbon dioxide, and xenon in these ILs over a wide range of temperature and pressure. It has been observed that no binary parameters are needed to correlate the solubility of hydrogen in [C(6)-mim][Tf(2)N] at different temperatures, and predictions up to 100 MPa are presented here. The model is able to correlate with very good agreement the experimental data for the systems [C(n)-mim][Tf(2)N] + CO(2) with only one temperature-independent mixture parameter, while two temperature-independent mixture parameters are needed to correlate the experimental solubility data for the systems IL + Xe, attaining an excellent agreement in a wide range of temperatures. The work presented here reinforces previous results, proving that a reasonable simple model for the IL within the framework of soft-SAFT is able to describe the physical absorption of different gases in ILs with good accuracy, in spite of the most complex nature of the anion, without the need of further parameters or terms. In addition, since these parameters do not depend on the particular conditions at which they were fitted, soft-SAFT is used then to analyze the solubility dependence of these gases in ILs, according to the anion nature and the alkyl chain length of the imidazolium cation by the use of the models developed within this approach.

In this work, the PC-SAFT equation of state (EoS) has been used to model the solubility of acid gases (CO2 and H2S) in two imidazolium-based ionic liquids (ILs) ([C8-mim][PF6] and [C8-mim][Tf2N]). Parameters of pure ILs were estimated using experimental densities. Two strategies were considered to model densities of pure ILs. In strategy 1, ILs were modeled as nonassociating compounds and in strategy 2 ILs were considered as self-associating molecules and both association sites were assigned to each ILs. According to the results, the associating contribution should be taken into account in order to accurately correlate the properties of ILs. The solubility of CO2 and H2S in ionic liquids was then studied. In order to describe the experimental gas solubilities quantitatively, binary interaction parameters between the ILs and the gases were applied, which were allowed to depend linearly on temperature. After fitting a binary interaction parameter kij on experimental VLE data, the model was able to describe accurately the solubility of acid gases in these two ionic liquids. Using second strategy, an average deviation of less than 2.2% and 3.2% in the calculation of the mole fraction of CO2 and H2S in ILs (x2) were obtained, respectively.

Separation of ethylbenzene/styrene systems using ionic liquids in ternary LLE

Time-resolved fluorescence spectra and fluorescence anisotropy decay of 2-aminoquinoline (2AQ) have been measured in eight room-temperature ionic liquids, including five imidazolium-based aromatic ionic liquids and three nonaromatic ionic liquids. The same experiments have also been carried out in several ordinary molecular liquids for comparison. The observed time-resolved fluorescence spectra indicate the formation of pi-pi aromatic complexes of 2AQ in some of the aromatic ionic liquids but not in the nonaromatic ionic liquids. The fluorescence anisotropy decay data show unusually slow rotational diffusion of 2AQ in the aromatic ionic liquids, suggesting the formation of solute-solvent complexes. The probe 2AQ molecule is likely to be incorporated in the possible local structure of ionic liquids, and hence the anisotropy decays only through the rotation of the whole local structure, making the apparent rotational diffusion of 2AQ slow. The rotational diffusion time decreases rapidly by adding a small amount of acetonitrile to the solution. This observation is interpreted in terms of the local structure formation in the aromatic ionic liquids and its destruction by acetonitrile. No unusual behavior upon addition of acetonitrile has been found for the nonaromatic ionic liquids. It is argued that the aromaticity of the imidazolium cation plays a key role in the local structure formation in imidazolium-based ionic liquids.

The thermophysical properties (decomposition temperature, glass transition temperature, density, and viscosity) of imidazolium-based ionic liquids (ILs) paired with the tricyanomethanide ([TCM]−) anion and the bis(trifluoromethylsulfonyl)imide ([Tf2N]−) anion were studied within a wide temperature range. The effect of the ether functional group (in [Tf2N]− and [TCM]− ILs) and hydroxyl functional group (in [Tf2N]− IL) incorporated in the cation’s alkyl chain on the thermophysical behavior and carbon dioxide (CO2) solubility was evaluated by comparing their behavior to the corresponding nonfunctionalized ILs. The thermal stability was enhanced by the inclusion of hydroxyl functionalization in the cation’s alkyl chain while ether functionalization had no major effect on the thermal stability. The ether groups (one or two) resulted in an increase in the density and a decrease in the viscosity of all ILs. The hydroxyl group resulted in an increase in both properties. The CO2 solubilities were not affected by the presence of the ether groups, while the hydroxyl group led to a significant decrease in the solubility. Additionally, the electrolyte perturbed-chain statistical associated fluid theory (ePC-SAFT) equation of state was used to calculate the CO2 solubility in the ILs and the Henry’s law constant. The model showed great predictive ability. The Henry’s constants were applied to calculate the partial molar thermodynamic properties of solvation.

Anti-corrosion properties of new imidazolium-based ionic liquids as a function of cation structure

Evaluation of interaction between imidazolium-based chloride ionic liquids and calf thymus DNA

Promoting fluid transportation in porous media has important applications in energy, pedology, bioscience, etc. For this purpose, one effective way is to prevent swelling through surface modification; however, it is far from enough in real cases, such as ultra-low permeability reservoirs and tight oils. In this study, we considered the comprehensive effects of inhibiting clay swelling, flocculation performance, reducing water clusters and interfacial tension and developed a series of imidazole-based tetrafluoroborate ionic liquids (ILs) with different lengths of alkyl chains. Through measurements of anti-swelling rates, XRD, SEM, 17O NMR, molecular dynamics simulation, zeta potential, flocculation evaluation, interfacial tension and a core flooding experiment based on ultra-low permeability reservoirs, the relationships between the molecular structure and physicochemical properties of ILs have been revealed. Interestingly, one of the selected ILs, imidazole-based tetrafluoroborate ILs (C8-OMImBF4), shows excellent performance, which is helpful to design an effective strategy in promoting fluid transportation in narrow spaces.

Ionic polyimides (i-PI) are a new class of polymer materials that are very promising for CO2 capture membranes, and recent experimental studies have demonstrated their enhanced separation performance with the addition of imidazolium-based ionic liquids (ILs). However, there is very little known about the molecular-level interactions in these systems, which give rise to interesting gas adsorption and diffusion characteristics. In this study, we use a combination of Monte Carlo and molecular dynamics simulations to analyze the equilibrium and transport properties of CO2 molecules in the i-PI and i-PI + IL composite materials. The addition of several different common ILs are modeled, which have a plasticization effect on the i-PI, lowering the glass transition temperature (Tg). The solubility of CO2 strongly correlates with the Tg, but the diffusion demonstrates more unpredictable behavior. At low concentrations, the IL has a blocking effect, leading to reduced diffusion rates. However, as the IL surpasses a threshold value, the relationship is inverted and the IL has a facilitating effect on the gas transport. This behavior is attributed to the simultaneous contributions of the increased i-PI plasticization at higher IL concentrations (facilitating gas hopping rates from cavity-to-cavity) and the increased IL continuity throughout the system, enabling more favorable transport pathways for CO2 diffusion.

Wetting behavior of aqueous 1-alkyl-3-methylimidazolium tetrafluoroborate {[Cn MIM][BF4] (n = 2, 4, 6)} on graphite surface

In the present work, wetting and interfacial properties of two new kinds of imidazolium-based ionic liquid (IL) nanodroplets, that is, dicationic IL and tricationic IL with respect to a baseline of a traditional monocationic IL on a boron nitride (BN) surface, is studied using classical molecular dynamics simulation. Calculated contact angles of all studied nanodroplets on the BN surface are lower than 90°, which demonstrate favorable wettability of the studied ILs on the BN sheet. Density profiles show an enhancement in density of both cations and anions at the BN surface for all studied droplets. Orientational analysis revealed that for monocationic ionic liquids, the imidazolium ring of cations lies parallel to the BN surface, while for multicationic ILs (dication and trication), the perfect parallel arrangement could not be observed. Identification of the truly interfacial molecule method has been used to analyze the structure and dynamics of the ions at the interface. It shows that the survival probability of cations at the interface decreases with increasing number of imidazolium moieties in the cation. The above observations signify the importance of charge and size of the cation on wetting and interfacial properties of ILs in contact with solid surfaces.

Electronic structural properties of the three different imidazolium-based ionic liquids, namely, 1-butyl-3-methyl imidazolium bromide (C4mimBr), 1-(4-hydroxybutyl)-3-methylimidazolium bromide (C4OHmimBr), and 1-(4-aminobutyl)-3-methylimidazolium bromide (C4NH2mimBr), were investigated with density functional theory at the B3LYP/6-311++G(d,p) level. The conformations of the mentioned cations were fully studied first using CONFLEX 8.A program. The quantum theory of atoms in molecules was used to investigate the nature of intramolecular interactions. The counterpoise-corrected ion pairs binding energies were obtained at the same level of theory. Natural bond orbital analyses show that the largest intra-molecular interaction comes from the orbital overlap between n(N1) and π* (N4–C5) in the mentioned compounds. The energy levels of frontier molecular orbitals (FMOs) are displayed. The global quantum chemical descriptors are also calculated based on the energy values of FMOs.

A coherent computational scheme on a very large molecule in which the subsystem that undergoes the most important electronic changes is treated by a semiempirical quantum chemical method, though the rest of the molecule is described by a classical force field, has been proposed recently. The continuity between the two subsystems is obtained by a strictly localized bond orbital, which is assumed to have transferable properties determined on model molecules. The computation of the forces acting on the atoms is now operating, giving rise to a hybrid classical quantum force field (CQFF) which allows full energy minimization and modeling chemical changes in large biomolecules. As an illustrative example, we study the short hydrogen bonds and the proton-exchange process in the histidine-aspartic acid system of the catalytic triad of human neutrophil elastase. The CQFF approach reproduces the crystallographic data quite well, in opposition to a classical force field. The method also offers the possibility of switching off the electrostatic interaction between the quantum and the classical subsystems, allowing us to analyze the various components of the perturbation exerted by the macromolecule in the reactive part. Molecular dynamics confirm a fast proton exchange between the three possible energy wells. The method appears to be quite powerful and applicable to other cases of chemical interest such as surface reactivity of nonmetallic solids. © 1996 John Wiley & Sons, Inc.

This manuscript focuses on the application of imidazolium‐based ionic liquids (ILs) 1‐butyl‐3‐methylimidazolium hexafluorophosphate ([BMIM] + [PF 6 ] − ) and 1‐butyl‐3‐methylimidazolium bis(trifluoromethane)sulfonimide ([BMIM] + [TFSI] − ) as potential entrainers for the separation of cyclohexane/benzene and heptane/toluene utilizing gas liquid chromatography (GLC) technique. The activity coefficients at infinite dilution were obtained for 20 solutes including both polar and nonpolar in each IL at different temperatures ranging from 323.15 to 363.15 K and at pressure 101.3 kPa. The COSMO‐RS model was applied to predict experimental data and to assess the solvent–solute interactions. The results indicate that the COSMO‐RS model is an effective screening tool, offering a cost‐effective and time‐saving alternative to extensive experimental procedures. Partial molar excess enthalpies at infinite dilution, , selectivities, , and capacities, , were also determined for each of the separations studied. The extraction efficiency of the evaluated ILs was also compared with previously studied ILs and conventional solvents such as NMP and sulfolane which are available in the literature. Based on the findings, the activity coefficients and intermolecular interactions of different solutes in ILs are highly dependent on the chemical structure of the IL. Moreover, it also determines the enthalpy behavior of the binary mixture.

The kinetic and thermodynamic effects of three typical low‐dosage imidazolium‐based ionic liquids (ILs) on methane hydrate formation and dissociation were investigated, considering the anion nature and subcooling and/or overpressure driving forces. Isochoric hydrate formation and dissociation data were obtained by the modified slow step‐heating method. ILs proved to have a dual effect on both formation and dissociation of methane hydrate including thermodynamic and kinetic inhibition. Kinetic modeling of methane hydrate inhibition by low‐dosage ILs was performed. Kinetic analysis showed that IL inhibitors mainly cause a delay in the nucleation or hydrate growth step. The related inhibition mechanism was resolved regarding the ionic nature and electrostatic interactions of ILs with water molecules. Two binomial exponential kinetic relations were derived and used for simple methane hydrate formation in the presence of ILs as kinetic hydrate inhibitors. The proposed relations can serve for a quick estimation of the nature, extent, strength, and effectiveness of ILs on various gas hydrates.