MR-based truncation and attenuation correction in integrated PET/MR hybrid imaging using HUGE with continuous table motion.

PurposeThis study evaluates the quantitative effect of improved MR-based attenuation correction (AC), including bone segmentation and the HUGE method for truncation correction in PET/MR whole-body hybrid imaging specifically of oncologic patients with bone metastasis and using various radiotracers.MethodsTwenty-three patients that underwent altogether 28 whole-body PET/MR examinations with findings of bone metastasis were included in this study. Different radiotracers (18F-FDG, 68Ga-PSMA, 68Ga-DOTATOC, 124I–MIBG) were injected according to appropriate clinical indications. Each of the 28 whole-body PET datasets was reconstructed three times using AC with (1) standard four-compartment μ-maps (background air, lung, muscle, and soft tissue), (2) five-compartment μ-maps (adding bone), and (3) six-compartment μ-maps (adding bone and HUGE truncation correction). The SUVmax of each detected bone lesion was measured in each reconstruction to evaluate the quantitative impact of improved MR-based AC. Relative difference images between four- and six-compartment μ-maps were calculated. MR-based HUGE truncation correction was compared with the PET-based MLAA truncation correction method in all patients.ResultsOverall, 69 bone lesions were detected and evaluated. The mean increase in relative difference over all 69 lesions in SUVmax was 5.4 ± 6.4% when comparing the improved six-compartment AC with the standard four-compartment AC. Maximal relative difference of 28.4% was measured in one lesion. Truncation correction with HUGE worked robust and resulted in realistic body contouring in all 28 exams and for all 4 different radiotracers. Truncation correction with MLAA revealed overestimations of arm tissue volume in all PET/MR exams with 18F-FDG radiotracer and failed in all other exams with radiotracers 68Ga-PSMA, 68Ga-DOTATOC, and 124I- MIBG due to limitations in body contour detection.ConclusionImproved MR-based AC, including bone segmentation and HUGE truncation correction in whole-body PET/MR on patients with bone lesions and using various radiotracers, is important to ensure best possible diagnostic image quality and accurate PET quantification. The HUGE method for truncation correction based on MR worked robust and results in realistic body contouring, independent of the radiotracers used.

BackgroundIn integrated PET/MR hybrid imaging the evaluation of PET performance characteristics according to the NEMA standard NU 2–2007 is challenging because of incomplete MR-based attenuation correction (AC) for phantom imaging. In this study, a strategy for CT-based AC of the NEMA image quality (IQ) phantom is assessed. The method is systematically evaluated in NEMA IQ phantom measurements on an integrated PET/MR system.MethodsNEMA IQ measurements were performed on the integrated 3.0 Tesla PET/MR hybrid system (Biograph mMR, Siemens Healthcare). AC of the NEMA IQ phantom was realized by an MR-based and by a CT-based method. The suggested CT-based AC uses a template μ-map of the NEMA IQ phantom and a phantom holder for exact repositioning of the phantom on the systems patient table. The PET image quality parameters contrast recovery, background variability, and signal-to-noise ratio (SNR) were determined and compared for both phantom AC methods. Reconstruction parameters of an iterative 3D OP-OSEM reconstruction were optimized for highest lesion SNR in NEMA IQ phantom imaging.ResultsUsing a CT-based NEMA IQ phantom μ-map on the PET/MR system is straightforward and allowed performing accurate NEMA IQ measurements on the hybrid system. MR-based AC was determined to be insufficient for PET quantification in the tested NEMA IQ phantom because only photon attenuation caused by the MR-visible phantom filling but not the phantom housing is considered. Using the suggested CT-based AC, the highest SNR in this phantom experiment for small lesions (<= 13 mm) was obtained with 3 iterations, 21 subsets and 4 mm Gaussian filtering.ConclusionThis study suggests CT-based AC for the NEMA IQ phantom when performing PET NEMA IQ measurements on an integrated PET/MR hybrid system. The superiority of CT-based AC for this phantom is demonstrated by comparison to measurements using MR-based AC. Furthermore, optimized PET image reconstruction parameters are provided for the highest lesion SNR in NEMA IQ phantom measurements.

BackgroundA valid photon attenuation correction (AC) method is instrumental for obtaining quantitatively correct PET images. Integrated PET/MR systems provide no direct information on attenuation, and novel methods for MR-based AC (MRAC) are still under investigation. Evaluations of various AC methods have mainly focused on static brain PET acquisitions. In this study, we determined the validity of three MRAC methods in a dynamic PET/MR study of the brain.MethodsNine participants underwent dynamic brain PET/MR scanning using the dopamine transporter radioligand [11C]PE2I. Three MRAC methods were evaluated: single-atlas (Atlas), multi-atlas (MaxProb) and zero-echo-time (ZTE). The 68Ge-transmission data from a previous stand-alone PET scan was used as reference method. Parametric relative delivery (R1) images and binding potential (BPND) maps were generated using cerebellar grey matter as reference region. Evaluation was based on bias in MRAC maps, accuracy and precision of [11C]PE2I BPND and R1 estimates, and [11C]PE2I time-activity curves. BPND was examined for striatal regions and R1 in clusters of regions across the brain.ResultsFor BPND, ZTE-MRAC showed the highest accuracy (bias < 2%) in striatal regions. Atlas-MRAC exhibited a significant bias in caudate nucleus (− 12%) while MaxProb-MRAC revealed a substantial, non-significant bias in the putamen (9%). R1 estimates had a marginal bias for all MRAC methods (− 1.0–3.2%). MaxProb-MRAC showed the largest intersubject variability for both R1 and BPND. Standardized uptake values (SUV) of striatal regions displayed the strongest average bias for ZTE-MRAC (~ 10%), although constant over time and with the smallest intersubject variability. Atlas-MRAC had highest variation in bias over time (+10 to − 10%), followed by MaxProb-MRAC (+5 to − 5%), but MaxProb showed the lowest mean bias. For the cerebellum, MaxProb-MRAC showed the highest variability while bias was constant over time for Atlas- and ZTE-MRAC.ConclusionsBoth Maxprob- and ZTE-MRAC performed better than Atlas-MRAC when using a 68Ge transmission scan as reference method. Overall, ZTE-MRAC showed the highest precision and accuracy in outcome parameters of dynamic [11C]PE2I PET analysis with use of kinetic modelling.

Positron emission tomography (PET)/magnetic resonance (MR) imaging may become increasingly important for assessing tumor therapy response. A prerequisite for quantitative PET/MR imaging is reliable and repeatable MR-based attenuation correction (AC). To investigate the frequency and test-retest reproducibility of artifacts in MR-AC maps in a lung cancer patient cohort and to study the impact of artifact corrections on PET-based tumor quantification. Twenty-five lung cancer patients underwent single-day, test-retest, 18F-fluorodeoxyglucose (FDG) PET/MR imaging. The acquired MR-AC maps were inspected for truncation, susceptibility, and tissue inversion artifacts. An anatomy-based bone template and a PET-based estimation of truncated arms were employed, while susceptibility artifacts were corrected manually. We report the frequencies of artifacts and the relative difference (RD) on standardized uptake value (SUV) based quantification in PET images reconstructed with the corrected AC maps. Truncation artifacts were found in all 50 acquisitions (100%), while susceptibility and tissue inversion artifacts were observed in six (12%) and 26 (52%) of the scans, respectively. The RD in lung tumor SUV was < 5% from bone and truncation corrections, while up to 20% RD was introduced after susceptibility artifact correction, with large inconsistencies between test-retest scans. The absence of bone and truncation artifacts have limited effect on the PET quantification of lung lesions. In contrast, susceptibility artifacts caused significant and inconsistent underestimations of the lung tumor SUVs, between test-retest scans. This may have clinical implications for patients undergoing serial imaging for tumor therapy response assessment.

ObjectiveTo evaluate the frequency of artifacts in MR-based attenuation correction (AC) maps and their impact on the quantitative accuracy of PET-based flow and metabolism measurements in a cohort of consecutive heart failure patients undergoing combined PET/MR imaging. MethodsMyocardial viability studies were performed in 20 patients following a dual-tracer protocol involving the assessment of myocardial perfusion (13N-NH3: 813 ± 86 MBq) and metabolism (18F-FDG: 335 ± 38 MBq). All acquisitions were performed using a fully-integrated PET/MR system, with standard DIXON-attenuation correction (DIXON-AC) mapping for each PET scan. All AC maps were examined for spatial misalignment with the emission data, total lung volume, susceptibility artifacts, and tissue inversion (TI). Misalignment and susceptibility artifacts were corrected using rigid co-registration and retrospective filling of the susceptibility-induced gaps, respectively. The effects of the AC artifacts were evaluated by relative difference measures and perceived changes in clinical interpretations. ResultsAverage respiratory misalignment of (7 ± 4) mm of the PET-emission data and the AC maps was observed in 18 (90%) patients. Substantial changes in the lung volumes of the AC maps were observed in the test–retest analysis (ratio: 1.0 ± 0.2, range: 0.8-1.4). Susceptibility artifacts were observed in 10 (50%) patients, while six (30%) patients had TI artifacts. Average differences of 14 ± 10% were observed for PET images reconstructed with the artifactual AC maps. The combined artifact effects caused false-positive findings in three (15%) patients. ConclusionStandard DIXON-AC maps must be examined carefully for artifacts and misalignment effects prior to AC correction of cardiac PET/MRI studies in order to avoid misinterpretation of biased perfusion and metabolism readings from the PET data.

We describe a new MR-based attenuation correction (MRAC) method for neurological studies performed using integrated PET/MR scanners. The method, combining the advantages of image segmentation and atlas-based approaches to generate a high-resolution template, is based on the widely available SPM8 software and provides robust and accurate linear attenuation coefficients (LACs) for head while requiring minimal user interaction. Atlas generation: 3T MR and CT images from 15 glioblastoma subjects were used to generate the high-resolution atlas. MR images were segmented into 6 tissue classes: GM, WM, CSF, soft tissue, bone and air)[1]. Tissue classes were then coregistered using an iterative diffeomorphic image registration algorithm [2] to form the template. Atlas validation: The template was validated on 16 subjects. SyN [3] and IRTK [4], considered state-of-the-art for non-rigid image registration[5], were used for comparison. Final attenuation maps were created from the warped CT atlas following [6]. PET images were then reconstructed using the proposed methods as well as the manufacturer’s built-in method (dual-echo Dixon-VIBE sequence) [7] and compared to the gold standard CT-based attenuation correction (CTAC). The qualitative and quantitative analysis of the attenuation maps revealed that the SPM8-based method produces very robust results (Figure ​(Figure1).1). In terms of the PET data quantification, we observed improvements of > 70% compared to the VIBE-based method (Table ​(Table11 and Figure ​Figure2).2). When compared to SyN-based image registration, the SPM8 approach showed improved global results on the brain area (Figures ​(Figures11 and ​and22). Figure 1 Comparison of LACs from a validation subject for our proposed method (A), the SyN method (B) and the manufacturer’s built-in Dixon method (C) to the gold standard CTAC (D). Image differences with respect to the gold standard CTAC of our method ... Table 1 Summary of voxel- and ROI-based results between our method (atlas) and the current manufacturer’s method (Dixon) Figure 2 PET images from a validation subject reconstructed with our proposed method (A), with the SyN method (B) and with the manufacturer’s built-in Dixon method (C), compared with the gold standard CTAC (D). Relative changes (in % with respect to gold ... We presented a new MRAC technique for brain images acquired on simultaneous PET/MR scanners. The new approach relies on segmentation- and atlas-based features to provide robust and more accurate LACs than using state-of-art non-rigid image registration while avoiding sophisticated user input or interaction.

Comparison of pre- and post-contrast-enhanced attenuation correction using a CAIPI-accelerated T1-weighted Dixon 3D-VIBE sequence in 68Ga-DOTATOC PET/MRI

Quantitative PET image reconstruction requires an accurate map of photon attenuation coefficients (μ-map) in order to correct the PET emission data. Current PET/MR imaging systems use methods based on MR image segmentation with subsequent assignment of empirical attenuation coefficients. In this study we examine the differences in the quantification of 18F-FDG standardized uptake values (SUV) in head and neck cancer, using two different MR imaging sequences for MR-based attenuation correction (MRAC): a zero echo time (ZTE) sequence which can image bone directly (ZTE-MRAC), and a vendor-provided 2-point Dixon sequence that neglects bone (Dixon-MRAC). The μ-maps from each MRAC techniques were compared to CT-based attenuation correction (CTAC) maps. Percent SUV-mean and SUV-max differences in relevant regions of interest (ROIs) were calculated for three patients. Relative to Dixon-MRAC, we observed 15±7% and 14±8% increase of SUV-mean and SUV-max, respectively, when ZTE-based bone information was incorporated in the attenuation map and using Dixon-based attenuation map, respectively. We also observed that use of Dixon-MRAC led to 7±7% and 8±8% underestimation of SUV-mean and SUV-max, respectively, whereas with ZTE-MRAC led to 6±8% and 5±8% higher SUV-mean and SUV-max, respectively, compared to CTAC. This study is the first demonstration of ZTE-based attenuation correction in the head and neck region and compared with CTAC as a gold standard with the goal of improving PET quantitation. The study shows that incorporation of bone information on μ-maps has a significant impact on SUV quantitation in head and neck cancer lesions.

PET Attenuation Correction (AC) in small animal imaging is generally performed via transmission (TX) scans. In simultaneous PET/MR scanners, no transmission source is available, and MR-based AC (MRAC) or AC from emission data is necessary. However, MR-invisible objects such as the bed and the MR coils cannot be corrected from MR data. We quantified the effects of a Medres warming bed and a local brain coil on AC for small animal PET/MR imaging using a dedicated Inveon PET tomograph. Additionally, the effect of segmentation-based MRAC of rats in brain regions was evaluated using MR images separately acquired on a preclinical 7T MRI system.

The aim of this paper is to describe a new automatic method for compensation of metal-implant-induced segmentation errors in MR-based attenuation maps (MRMaps) and to evaluate the quantitative influence of those artifacts on the reconstructed PET activity concentration. The developed method uses a PET-based delineation of the patient contour to compensate metal-implant-caused signal voids in the MR scan that is segmented for PET attenuation correction. PET emission data of 13 patients with metal implants examined in a Philips Ingenuity PET/MR were reconstructed with the vendor-provided method for attenuation correction (MRMaporig, PETorig) and additionally with a method for attenuation correction (MRMapcor, PETcor) developed by our group. MRMaps produced by both methods were visually inspected for segmentation errors. The segmentation errors in MRMaporig were classified into four classes (L1 and L2 artifacts inside the lung and B1 and B2 artifacts inside the remaining body depending on the assigned attenuation coefficients). The average relative SUV differences () between PETorig and PETcor of all regions showing wrong attenuation coefficients in MRMaporig were calculated. Additionally, relative SUVmean differences (εrel) of tracer accumulations in hot focal structures inside or in the vicinity of these regions were evaluated. MRMaporig showed erroneous attenuation coefficients inside the regions affected by metal artifacts and inside the patients' lung in all 13 cases. In MRMapcor, all regions with metal artifacts, except for the sternum, were filled with the soft-tissue attenuation coefficient and the lung was correctly segmented in all patients. MRMapcor only showed small residual segmentation errors in eight patients. (mean ± standard deviation) were: ( − 56 ± 3)% for B1, ( − 43 ± 4)% for B2, (21 ± 18)% for L1, (120 ± 47)% for L2 regions. εrel (mean ± standard deviation) of hot focal structures were: ( − 52 ± 12)% in B1, ( − 45 ± 13)% in B2, (19 ± 19)% in L1, (51 ± 31)% in L2 regions. Consequently, metal-implant-induced artifacts severely disturb MR-based attenuation correction and SUV quantification in PET/MR. The developed algorithm is able to compensate for these artifacts and improves SUV quantification accuracy distinctly.

Modern radiation therapy (RT) treatment planning is based on multimodality imaging. With the recent availability of whole-body PET/MR hybrid imaging new opportunities arise to improve target volume delineation in RT treatment planning. This, however, requires dedicated RT equipment for reproducible patient positioning on the PET/MR system, which has to be compatible with MR and PET imaging.A prototype flat RT table overlay, radiofrequency (RF) coil holders for head imaging, and RF body bridges for body imaging were developed and tested towards PET/MR system integration. Attenuation correction (AC) of all individual RT components was performed by generating 3D CT-based template models. A custom-built program for μ-map generation assembles all AC templates depending on the presence and position of each RT component. All RT devices were evaluated in phantom experiments with regards to MR and PET imaging compatibility, attenuation correction, PET quantification, and position accuracy. The entire RT setup was then evaluated in a first PET/MR patient study on five patients at different body regions.All tested devices are PET/MR compatible and do not produce visible artifacts or disturb image quality. The RT components showed a repositioning accuracy of better than 2 mm. Photon attenuation of −11.8% in the top part of the phantom was observable, which was reduced to −1.7% with AC using the μ-map generator. Active lesions of 3 subjects were evaluated in terms of SUVmean and an underestimation of −10.0% and −2.4% was calculated without and with AC of the RF body bridges, respectively. The new dedicated RT equipment for hybrid PET/MR imaging enables acquisitions in all body regions. It is compatible with PET/MR imaging and all hardware components can be corrected in hardware AC by using the suggested μ-map generator. These developments provide the technical and methodological basis for integration of PET/MR hybrid imaging into RT planning.

Hybrid PET and MR scanners have become a reality in recent years, with the benefits of reduced radiation exposure, reduction of imaging time, and potential advantages in quantification. Appropriate attenuation correction remains a challenge. Biases in PET activity measurements were demonstrated using the current MR-based attenuation-correction technique. We aimed to investigate the impact of using a standard MR-based attenuation correction technique on the clinical and research utility of a PET/MR hybrid scanner for amyloid imaging. Florbetapir scans were obtained for 40 participants on a hybrid scanner with simultaneous MR acquisition. PET images were reconstructed using both MR- and CT-derived attenuation maps. Quantitative analysis was performed for both datasets to assess the impact of MR-based attenuation correction to absolute PET activity measurements as well as target-to-reference ratio (SUVR). Clinical assessment was also performed by a nuclear medicine physician to determine amyloid status based on the criteria in the Food and Drug Administration prescribing information for florbetapir. MR-based attenuation correction led to underestimation of PET activity for most parts of the brain, with a small overestimation for deep brain regions. There was also an overestimation of SUVRs with cerebellar reference. SUVR measurements obtained from the 2 attenuation-correction methods were strongly correlated. Clinical assessment of amyloid status resulted in identical classification as positive or negative regardless of the attenuation-correction methods. MR-based attenuation correction causes biases in quantitative measurements. The biases may be accounted for by a linear model, although the spatial variation cannot be easily modeled. The quantitative differences, however, did not affect clinical assessment as positive or negative.

Hybrid PET- and MR-driven attenuation correction for enhanced 18F-NaF and 18F-FDG quantification in cardiovascular PET/MR imaging

The goal of this study was to compare MR-based PET patient attenuation correction (AC) to CT-based AC in the head using clinical whole-body FDG-PET patient data obtained from a tri-modality PET/CT & MR setup. The MR-based AC utilizes an atlas-based approach, registering the patient's MR images to a CT-based atlas, producing `pseudoCT' images. Thirteen clinical whole-body FDG patients were included in this study. PET mean activity concentration values were measured and compared in six ~ 15 ml volumes-of-interest throughout the brain tissue. The AC methods compared to CT-based AC were segmentation of the CT (air, fat, soft tissue) and atlas-based MR-AC. Results: PET activity concentration was systematically under-estimated on average by 1.32 kBq/ml (4.9%) when using the segmented CT-based AC, mainly due to lack of attenuation correction for skull bone. Using the atlas-based method, the error was reduced to 0.03 kBq/ml (0.2%) on average. PET image visualization demonstrated spatial variations in activity concentration accuracy induced by the AC methods that were consistent with the approximations in each method. Conclusion: The results demonstrate that the atlas-based AC in the head provides adequate PET quantitation and image quality as compared to methods that do not account for bone.

The goal of this study was to compare MR-based PET patient attenuation correction (AC) to CT-based AC in the head using clinical whole-body FDG-PET patient data obtained from a tri-modality PET/CT & MR setup. The MR-based AC utilizes an atlas-based approach, registering the patient's MR images to a CT-based atlas, producing 'pseudoCT' images. Thirteen clinical whole-body FDG patients were included in this study. PET mean activity concentration values were measured and compared in six ~15ml volumes-of-interest throughout the brain tissue. The AC methods compared to CT-based AC were segmentation of the CT (air, fat, soft tissue) and atlas-based MRAC. Results: PET activity concentration was systematically under-estimated on average by 1.32 kBq/ml (4.9%) when using the segmented CT-based AC, mainly due to lack of attenuation correction for skull bone. Using the atlas-based method, the error was reduced to 0.03 kBq/ml (0.2%) on average. Examination of the resulting PET images shows the spatial variation induced by these methods based upon the approximations made. Conclusion: The results demonstrate that the atlas-based AC in the head provides adequate PET quantitation and image quality as compared to methods which did not include bone.