Multi-Constrained Anypath Routing in Wireless Mesh Networks

One of the key issues in providing end-to-end quality of service (QoS) guarantees in today's networks is how to determine a feasible route that satisfies a set of constraints. In general, finding a path subject to multiple constraints is an NP-complete problem that cannot be exactly solved in polynomial time. Accordingly, several heuristics and approximation algorithms have been proposed for this problem. Many of these algorithms suffer from either excessive computational cost or low performance. In this paper, we propose a fuzzy-logic based algorithm for finding a bandwidth-delay-constrained path by Dijkstra's shortest path algorithm. The main objective of Fuzzy QOS Routing Algorithm (FQRA) is to reduce packet loss and increase overall network utilization. To achieve this objective, the algorithm at First, eliminates all links with a bandwidth less than the requirement so that any paths in the resulting graph will satisfy the bandwidth constraint. Then, a new single parameter with the aid of Fuzzy Logic is generated from inputs bandwidth and delay. The Shortest path calculated by Dijkstra's algorithm based on new metric. Simulation results show that FQRA outperforms several earlier algorithms in terms of overall network utilization and packet loss. The worst-case computational complexity of this algorithm is within a logarithmic number of calls to Dijkstra's shortest path algorithm, equal with O(n2) for a network graph with n nodes.

Anypath routing is proposed to improve the performance of wireless networks by exploiting the spatial diversity and broadcast nature of the wireless medium. In this paper, we study anypath routing in wireless networks with directional antennas, and propose DART (Directional Anypath RouTing), a crosslayer design of MAC and routing layers. For the routing layer, we propose two shortest directional anypath routing algorithms based on two antenna models. Our routing algorithms are simple and fast, thus are suitable for implementation in practical protocols. For the MAC layer, we present a directional anycast MAC, which is an enhancement to the IEEE 802.11 MAC, making DART suitable for integration into current systems. Simulation results show that DART can significantly reduce the packet transmission delay.

Wireless technology is emerging as a key technology for the future networks. Wireless mesh networks (WMNs) have emerged as an indispensable technology for deployment of wireless services for various applications in personal, enterprise, and metropolitan areas. Researchers are working actively in different fields of WMNs for providing better services. Routing protocols play a vital role in WMNs to provide reliable configuration and maintenance of topology of the network. Designing a suitable cost metric for routing protocols to provide quality links for data transmission is the backbone of WMNs. Many cost metrics have been proposed for WMNs and is still an active research topic as new performance metrics need to be discovered due to the dynamics of this field. This paper considers the genetic algorithm-based routing technique for WMN.We have studied the existing cost metrics and proposed a genetic algorithm technique for routing in WMN. To evaluate the genetic algorithm, and to determine the relative performance of the genetic algorithm in the context of routing in WMN, we carry out experiments on two test systems. We have evaluated the quality of the results produced by our algorithm with the traditional hop count metric results. Our results show that routing in WMN using genetic algorithm produces better results as compared to traditional hop count metric results. Finally, we carry out a detailed analysis of results, which help us in gaining an insight into the suitability of genetic algorithm for routing in WMN.

Finding the shortest route in wireless mesh networks is an important aspect. Many techniques are used to solve this problem like dynamic programming, evolutionary algorithms, weighted-sum techniques, and others. In this paper, we use dynamic programming techniques to find the shortest path in wireless mesh networks due to their generality, reduction of complexity and facilitation of numerical computation, simplicity in incorporating constraints, and their onformity to the stochastic nature of some problems. The routing problem is a multi-objective optimization problem with some constraints such as path capacity and end-to-end delay. Single-constraint routing problems and solutions using Dijkstra, Bellman-Ford, and Floyd-Warshall algorithms are proposed in this work with a discussion on the difference between them. These algorithms find the shortest route through finding the optimal rate between two nodes in the wireless networks but with bounded end-to-end delay. The Dijkstra-based algorithm is especially favorable in terms of processing time. We also present a comparison between our proposed single-constraint Dijkstra-based routing algorithm and the mesh routing algorithm (MRA) existing in the literature to clarify the merits of the former.

The fundamental path planning problem for a mobile robot involves generating a trajectory for point-to-point navigation while avoiding obstacles. Heuristic-based search algorithms like A* have been shown to be efficient in solving such planning problems. Recently, there has been an increased interest in specifying complex path planning problem using temporal logic. In the state-of-the-art algorithm, the temporal logic path planning problem is reduced to a graph search problem, and Dijkstra's shortest path algorithm is used to compute the optimal trajectory satisfying the specification.The A* algorithm, when used with an appropriate heuristic for the distance from the destination, can generate an optimal path in a graph more efficiently than Dijkstra's shortest path algorithm. The primary challenge for using A* algorithm in temporal logic path planning is that there is no notion of a single destination state for the robot. We present a novel path planning algorithm T* that uses the A* search procedure opportunistically to generate an optimal trajectory satisfying a temporal logic query. Our experimental results demonstrate that T* achieves an order of magnitude improvement over the state-of-the-art algorithm to solve many temporal logic path planning problems in 2-D as well as 3-D workspaces.

QoS routing in wireless mesh networks (WMNs) is a daunting task. Finding a path for a given flow depends not only on the bandwidth-delay requirements of that flow but also on the available bandwidth of all the nodes in that path and the amount of bandwidth consumption caused by that flow along its path. Contrary to the wired networks, these two parameters are not fixed and depend on the interference pattern of the network that in turn depends on the selected path itself. This converts the QoS routing in wireless mesh networks to a much harder problem. Existing methods use on-demand approach based on flooding of routing packets. This approach does not scale up to large networks. Field-based routing (FBR) is a promising approach to reduce the routing overhead for static route set up. However, it is not previously used for QoS routing. In this paper, we have developed a new FBR based QoS routing protocol for WMNs. Contribution of this paper is two folds. First, a one-pass field-based routing instead of regular two-pass approach is developed that significantly reduces the overhead of distributing routing information and computing the path and increases the QoS delivered to the flows. Secondly, a new routing metric named LU-IR is introduced that is shown to lower intra-flow and inter-flow interferences and results in increased network service capacity. The performance of the proposed algorithm is extensively studied through simulations. The results indicate that average delay of the flows is improved and the network throughput is increased compared to the existing schemes.

When designing routing protocols for space-based networks, we must take into consideration the unique characteristics of such networks. Since space-based networks are inherently sparse with constrained resources, one needs to design smart routing algorithms that use the resources efficiently to maximize network performance. In Space Exploration Missions, the trajectories and orbits of spacecraft are predetermined, thus communication opportunities are predictable. This a-priori knowledge can be used to the advantage of scheduling and routing. In this paper, we focus on analyzing Contact Graph Routing (CGR) for space-based networks. CGR makes use of the predictable nature of the contacts to make routing decisions. Mars and Lunar mission-like scenarios were used in our simulations to gather statistics on routing protocol performance in terms of delay and buffer usage. We provide improvements to the underlying cost function of CGR to avoid routing loops and suggest applying Dijkstra's shortest path algorithm for path selection. The cost function change was incorporated into the latest Internet Draft posted for CGR. Dijkstra's shortest path algorithm was successfully implemented and tested in NASA's Interplanetary Overlay Network (ION) implementation of the DTN protocols.

This paper proposes a parallel shortest path-searching algorithm and implements it on a newly structured parallel reconfigurable processor, DAPDNA-2 (IPFlex Inc). Routing determines the shortest paths from the source to the ultimate destination through intermediate nodes. In open shortest path first (OSPF), Dijkstra's shortest path algorithm, which is the conventional one, finds the shortest paths from the source on a program counter-based processor. The calculation time for Dijkstra's algorithm is O(N <sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">2</sup> ) when the number of nodes is N. When the network scale is large, calculation time required by Dijkstra's algorithm increases rapidly. It's very difficult to compute Dijkstra's algorithm in parallel because of the need for previous calculation results, so Dijkstra's algorithm is unsuitable for parallel processors. Our proposed scheme finds the shortest paths using a simultaneous multi-path search method. In contrast with Dijkstra's algorithm, several nodes can be determined at one time. Moreover, we partition the network into different groups (network groups) and find the all-node pair's shortest path in each group using a pipeline operation. Networks can be abstracted, and the shortest paths in very large networks can be found easily. The proposed scheme can decrease calculation time from O(N <sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">2</sup> ) to O(N) using a pipeline operation on DAPDNA-2. Our simulations show that the proposed algorithm uses 99.6% less calculation time than Dijkstra's algorithm. The proposed algorithm can be applied to the very large Internet network designs of the future.

Wireless technology has become an essential part of this era’s human life and has the capability of connecting virtually to any place within the universe. A mesh network is a self healing wireless network, built through a number of distributed and redundant nodes to support variety of applications and provide reliability. Similarly, anycasting is an important service that might be used for a variety of applications. In this paper we have studied anycast routing in the wireless mesh networks and the anycast traffic from the gateway to the mesh network having multiple anycast groups. We have also studied the geocast traffic in which the packets reach to the group head via unicast traffic and then are broadcasted inside the group. Moreover, we have studied the intergroup communication between different anycast groups. The review of the related literature shows that no one has considered anycasting and geocasting from gateway to the mesh network while considering the multiple anycast groups and intergroup communication. The network is modeled, simulated and analyzed for its various parameters using OMNET++ simulator.

QoS routing problem in wireless mesh networks is a NP-complete problem, and it is hard to get the global solution with the traditional algorithm. In this paper, we adopt a novel dynamic ant genetic hybrid algorithm to solve QoS unicast routing problem for wireless mesh network, whose innovation are using the best melting point evaluation strategy to control the calling of the two algorithms dynamically. Simulation results show that the novel algorithm is superior to the genetic algorithm and the static ant genetic hybrid algorithm in quality and efficiency for QoS routing in wireless mesh network.

A theorem on the expected complexity of dijkstra's shortest path algorithm

Efficient implementations of Dijkstra's shortest path algorithm are investigated. A new data structure, called the radix heap , is proposed for use in this algorithm. On a network with n vertices, m edges, and nonnegative integer arc costs bounded by C , a one-level form of radix heap gives a time bound for Dijkstra's algorithm of O ( m + n log C ). A two-level form of radix heap gives a bound of O ( m + n log C /log log C ). A combination of a radix heap and a previously known data structure called a Fibonacci heap gives a bound of O ( m + n a @@@@log C ). The best previously known bounds are O ( m + n log n ) using Fibonacci heaps alone and O ( m log log C ) using the priority queue structure of Van Emde Boas et al. [ 17].

The ultimate goal of routing in wireless mesh networks (WMNs) is to find the “good” paths between the source and destination. Considering of the characteristics of this new networking paradigm, such as low mobility and less restriction from the energy effect, the focus is on the design and optimization of the technology to establish the path that can reflect this network feature. In this paper, an efficient routing algorithm is proposed based on decision-making sequence in WMNs, and the routing process is mapped into multi-stage decision process. We construct a mathematical model for it and present a multi-decision sequential routing method taking use of the idea of dynamic programming. In addition, a new metric (EEDT) for routing based on the information of MAC layer in WMNs is given, which optimized the two objectives- end to end delay and throughput. In the end, the multi-decision sequential routing algorithm (MDSR) is proposed that synthesized the suggesting method and new metric. The path selected by MDSR would be better based on the mathematical model, and it has lower delay of routing building. At the same time, EEDT can accurately capture the quality of the network links. Simulation results show that the proposed routing algorithm significantly improves the performance of the WMNs in terms of end-to-end delay and throughput.

Efficient multicasting over Wireless Mesh Network (WMN) is challenging due to dynamic and multi-hop wireless communication among multicast group members. Multicast Ad hoc On-Demand Distance Vector (MAODV) protocol is a tree based multicast routing protocol that enables dynamic, self-starting, multi-hop routing between participating mobile nodes wishing to join or participate in a multicast group in Wireless Mesh Network (WMN). The mobility of mobile nodes often causes link breakage in the tree-based protocols which sometime results in tree partitioning and poor performance. In MAODV, when a broken link is detected between two nodes on the multicast tree, the node downstream to the break is responsible for initiating the repair of the broken link. After link repair, it is likely that the previous distance between the nodes (nodes downstream to the link breakage) and the group leader will not remain same. The shortest path from the group leader to the nodes downstream to the node which initiates link breakage is not ensured. Moreover, if the node attempting to repair a tree link break does not receive a response after certain attempts, it assumes that the multicast tree is not repairable currently and this leads to tree partitioning. In this paper, an improved link repair technique is proposed which ensures shortest path from any node to the group leader. Simulation results demonstrate significant improvement in performance metrics compared to standard MAODV.

To support reliable multicast routing in wireless mesh networks, it is important to protect multicast sessions against link or node failures. The issue of protecting multicast sessions in wireless mesh networks is a new problem to the best of our knowledge. In this paper, we propose a resilient forwarding mesh approach for protecting a multicast session in wireless mesh networks. Utilizing the wireless broadcast advantage, a resilient forwarding mesh effectively establishes two node disjoint paths for each source-destination pair. This allows a multicast session to be immune from any single link or intermediate node failure. We introduce four heuristic algorithms to obtain approximate solutions that seek to minimize the number of required broadcast transmissions. We evaluate the performance of these heuristic algorithms against the optimal resilient forwarding mesh (ORFM) obtained by solving an integer linear programming (ILP) formulation of the problem. Experimental results demonstrate that one of these heuristic algorithms, which we call the minimal disjoint mesh algorithm (MDM), performs sufficiently close to ORFM. Besides, we find that the resilient forwarding mesh approach provides efficient 1+ 1 protection (Pioro and Medhi, 2004) to the multicast session without incurring much additional overhead on a single minimal cost multicast tree