Multi-criteria fire detection systems using a probabilistic neural network

In recent years the complexity and cost of Fire and Gas detection systems have increased rapidly with no measurable reduction in fatality rates or other losses. A principal reason for this disappointing outcome despite substantial investment is that systems designs have lost the focus of what they are trying to achieve. Another reason worth exploring is that investment in other areas may result in greater benefits. For instance, diverting funds to preventing lifting accidents, helicopter failures and materials handling incidents, could result in greater OVERALL benefit since these account for a larger proportion of risks. Nevertheless, Fire and Gas detections systems have a major role to play in preventing escalation, and this paper shows how they can be made more efficient in both cost and performance by combining four methods: targeting perceived hazards,integration from concept stage with other safety designs,control of design with effective performance specification, andcontrol of modifications throughout the system's life.

Current indoor fire detection systems often have limitations, including insufficient intelligence and slow response times. Recent studies have started to explore AI vision-based methods for real-time fire and smoke detection to replace traditional fire sensors. However, indoor environments present many interference factors, and few methods can effectively demonstrate superior fire and smoke detection performance under multiple simulated interference conditions. To meet the requirements of real-time, high accuracy and anti-interference, a 3D convolutional neural network (3D-CNN)-based real-time fire and smoke detection model has been developed via red-green-blue (RGB) and near-infrared (NIR) feature fusion. RGB and NIR images with complementary information were used as dual-stream inputs to the model. The feature extraction module was enhanced by 3D attention mechanisms to simultaneously capture dynamic features between frames and static features within frames of fire and smoke. A non-linear feature gated fusion module has been developed to solve the challenges of missing multi-modal features and insufficient fusion. To validate the engineering effectiveness of the model, a large-scale multi-modal dataset was constructed in real indoor building scenarios, and a real-time indoor fire and smoke detection system was also developed and deployed at the experimental site.

Detection of fires in the toilet compartment and driver sleeping compartment of buses and coaches—Installation considerations based on full scale tests

The fire detection system combines the simultaneous measurements of smoke, carbon monoxide, and carbon dioxide. The security of campus against intruders moving in laboratories, class rooms, staffrooms or washrooms. The fire alarm system consists of Fire detectors (with can be smoke detector, heat, or Infra-Red detectors), control unit and alarm system. A fire detection system is developed based on the simultaneous measurements of temperature and smoke. The fire detection system with the alarm algorithm detected fires that were not alarmed by smoke sensors, and alarmed in shorter times than smoke sensors operating alone. Previous fire detection algorithms used data from sensors for temperature, smoke, and combustion products. The smoke sensor alarms when the analog output signal exceeds or equal the threshold value. The node includes analog sensors to measure smoke, carbon monoxide (CO) and temperature. A fire alarm system should reliably and in a timely way notify building occupants about the presence of fire indicators, such as smoke or high temperatures.

Currently, the forest fires are worldwide problem which requires a complete solution. The consequences of it are related, not only, to the environmental and biodiversity destruction but also to human and economic losses. In this article, forest fire and smoke detection systems, methods and technics literature review are carried out. To accomplish this aim, a generic mobile and non-mobile monitoring and surveillance systems applied in this field analysis took place. From the review carried out, it has been found that for fire detection two types of methods have been used, one based on machine learning and another through color features extraction of images or video frames, on the other hand, the combination of both methods is used for the detection of smoke and fire or only smoke, this guarantees accurate rates of more than 90%. Finally, a detailed analysis of the use of these fire and smoke detection algorithms in the UAS/UAV’s systems was carried out paying special attention on them due to the flexibility, versatility, and maneuverability abilities among others displayed by these systems that help prevent and mitigate forest fires.KeywordsFire forestSmoke forestMachine learningColor features extraction

DEVELOPMENT OF COMPUTER VISION-BASED AUTOMATIC FLAME DETECTION ALGORITHM USING MATLAB SOFTWARE ENVIRONMENT

In this paper, we proposed image processing technique for automatic real time fire and smoke detection in tunnel environment. To avoid the large scale of damage of fire occurred in the tunnel, it is necessary to have a system to minimize and to discover the incident as fast as possible. However it is impossible to keep the human observation of Closed-Circuit Television (CCTV) in tunnel for 24 hour. So if the fire and smoke detection system through image processing can warn fire state, it will be very convenient, and it can be possible to minimize damage even when people is not in front of monitor. The fire and smoke detection is different from the forest fire detection as there are elements such as car and tunnel lights and others that are different from the forest environment so that an indigenous algorithm has to be developed. The two algorithms proposed in this paper, are able to detect the exact position, at the earlier stage of incident. In addition, by comparing properties of each algorithm throughout experiment, we have proved the validity and efficiency of proposed algorithm

Fires constitute a significant risk to public safety and property, making early and accurate detection essential for an effective response and damage mitigation. Traditional fire detection methods have limitations in terms of accuracy and adaptability, particularly in complex environments in which various fire stages (such as smoke and active flames) need to be distinguished. This study addresses the critical need for a comprehensive fire detection system capable of multistage classification, differentiating between non-fire, smoke, apartment fires, and forest fires. We propose a deep learning-based model using a customized DenseNet201 architecture that integrates various preprocessing steps and explainable AI techniques, such as Grad-CAM++ and SmoothGrad, to enhance transparency and interpretability. Our model was trained and tested on a diverse, multisource dataset, achieving an accuracy of 97%, along with high precision and recall. The comparative results demonstrate the superiority of the proposed model over other baseline models for handling multistage fire detection. This research provides a significant advancement toward more reliable, interpretable, and effective fire detection systems capable of adapting to different environments and fire types, opening new possibilities for environmentally friendly fire type detection, ultimately enhancing public safety and enabling faster, targeted emergency responses.

Unearthing fire and smoke in sighted landscapes is challenging because of the great range of texture and color. To address this issue, several fire and smoke picture taxonomy systems have been proposed; however, the majority of them depend on either rule-based approaches or hand-crafted attributes. The technologies that support fire and smoke detection systems are important to ensuring and providing maximum performance in today’s surveillance situations. To overcome these limits, describe a unique technique based on a deep learning approach that employs a convolutional neural network with expanded convolutions. Fire may cause significant loss of life and property. Evaluated our method by training and testing it with a custom-built dataset of fire and smoke photos obtained from the Internet and manually classified. In terms of performance, our approach was compared against solutions based on well-known snipping architectures. The CNN used to recognize the activity of video abnormality and if any fire or smoke image was captured while analyzing frame by frame video then it was stored in the firebase database. If any fire frame is captured in the dataset then it gives the alert message to the android like notification. In terms of classification performance and complexity, our results suggest that our approach outperforms others.KeywordsFire detectionReal-world applicationsDeep learningSmoke detectionVideo analysisFrame by frame detectingClassification

The paper starts with the introduction of the basic requirements of classical intrusion detection and alarm systems and fire detection systems. The drawbacks of such conventional systems are highlighted. Techniques of computer vision are employed to remove the drawbacks and at the same time increase the reliability and response rate of the systems. For security and low level fire detection, a fuzzy logic based image comparison algorithm is deemed adequate. In order to confirm the existence of fire or smoke, techniques related to optical flow are employed as high level fire or smoke detection, which generate a velocity field for the image so that the decision can be judged by using fizzy logic. Details of implementation and some experimental results have been included in the paper for illustration.

Smoke control is one of the important aspects in atrium fire. For an efficient smoke control strategy, it is very important to identify the smoke and fire source in a very short period of time. However, traditional methods such as point type detectors are not effective for smoke and fire detection in large space such as atrium. Therefore, video smoke and fire detection systems are proposed. For the development of the system, automatic extraction and tracking of flame are two important problems needed to be solved. Based on entropy theory, region growing and Otsu method, a new automatic integrated algorithm, which is used to track flame from video images, is proposed in this paper. It can successfully identify flames from different environment, different background and in different form. The experimental results show that this integrated algorithm has stronger robustness and wider adaptability. In addition, because of the low computational demand of this algorithm, it is also possible to be used as part of a robust, real-time smoke and fire detection system.

Although there is a growing international movement toward the use of engineered or performance‐based fire safety design, current practice is dominated by prescriptive‐based design. In prescriptive‐based fire safety design, only those requirements prescribed by appropriate building regulations, installation standards, or approved documents tend to be applied. Because these requirements typically include fire protection measures, such as fire detection and signaling systems, automatic sprinkler systems, fire compartmentation, and emergency egress systems, there is often an assumption that occupants, employees, and users of a facility will be safe should a fire occur. However, there are a variety of factors that could affect the actual fire safety of a facility that comply with the appropriate regulations. Fuel type, loading, configuration, and location can change, leading to an increase in fire risk. Occupants may not see, hear or understand fire alarm signals as fire alarm signals. Fire detection and signaling systems, fire suppression systems, or smoke management systems may not be 100 percent functional at all times. Fortunately, many of these factors can be controlled for, if they are understood and addressed, within a fire safety management plan. To assist with such planning, this paper discusses various human behavior and response issues that may affect life safety during a fire or emergency, and provides suggestions for integrating these issues into a fire safety management plan.

Flame detection is a specialized task in fire detection and forest fire monitoring systems. In this paper, a static and dynamic texture analysis of flame in forest fire detection is proposed. The flames are initially segmented, based on the color in YCbCr (luminance, chrominance blue and chrominance red components) color space called candidate flame region. From the candidate flame region, the static and dynamic texture features are extracted. Static texture features are obtained by hybrid texture descriptors. Dynamic texture features are derived using 2D wavelet decomposition in temporal domain and 3D volumetric wavelet decomposition. Finally, extreme learning machine classifier is used to classify the candidate flame region as real flame or non-flame, based on the extracted texture features. The proposed flame detection system is applied to various fire detection scenes, in the real environments and it effectively distinguishes fire from fire-colored moving objects. The results show that the proposed fire detection technique achieves the average detection rate of 95.65% which is better compared to other state-of-art methods.

A fire disaster that does not save can certainly cause losses, both in the form of objects and casualties. This occurs for several reasons: late information obtained from the fire department or the owner's ignorance at the time of a fire. In this study, a fire early detection system was built using smoke, heat, and gas sensors based on an SMS gateway and an alarm. This system is used to provide information about fire detection as early as possible to protect against fire disasters. With this system, the potential and risk of fire can be reduced. This system is used to identify potential fires that occur in housing. Several experiments were carried out with fire simulations to get the reaction from the sensors used. Covers smoke testing, temperature testing, gas testing, and SMS message responses from various providers. This research produces a fire early warning system that provides SMS and alarm alerts.

Fire detection is a critical task in ensuring the safety of human lives and property. In recent years, deep learning techniques, such as Convolutional Neural Networks (CNNs), have shown promising results in fire detection due to their ability to automatically learn relevant features from images. In this project, we propose a real-time fire detection system using CNNs to detect fires in images or video streams. The proposed system consists of a CNN-based architecture that includes multiple convolutional layers for feature extraction, activation functions for introducing non-linearity, pooling layers for spatial dimension reduction, and fully connected layers for global pattern learning. The architecture is trained on a labelled dataset of fire and non-fire images or videos using optimization algorithms to minimize the loss function. To achieve real-time fire detection, the trained CNN model is integrated into a fire detection system that can process images or video streams in real-time. The system captures images or video frames from a live feed, pre-processes the data, and passes it through the CNN model for fire detection. The system can generate alerts or notifications in real-time when fire is detected, allowing for prompt response and mitigation measures. The performance of the proposed fire detection system is evaluated using metrics such as accuracy, precision, recall, and F1-score. The system is tested on different datasets and under various conditions to assess its accuracy, robustness, and real-time processing capabilities. The results of this project demonstrate the effectiveness of CNNs for real-time fire detection and highlight the potential of the proposed system for enhancing fire safety in various applications, including surveillance systems, smart buildings, and industrial settings. The developed system can be used as an early warning tool for fire detection, enabling timely response and mitigation, and helping to prevent or minimize the damage caused by fires. Keywords: Fire